[net-next,3/7] net: ipa: validate IPA table memory earlier
Commit Message
Add checks in ipa_table_init() to ensure the memory regions defined
for IPA filter and routing tables are valid.
For routing tables, the checks ensure:
- The non-hashed IPv4 and IPv6 routing tables are defined
- The non-hashed IPv4 and IPv6 routing tables are the same size
- The number entries in the non-hashed IPv4 routing table is enough
to hold the number entries available to the modem, plus at least
one usable by the AP.
For filter tables, the checks ensure:
- The non-hashed IPv4 and IPv6 filter tables are defined
- The non-hashed IPv4 and IPv6 filter tables are the same size
- The number entries in the non-hashed IPv4 filter table is enough
to hold the endpoint bitmap, plus an entry for each defined
endpoint that supports filtering.
In addition, for both routing and filter tables:
- If hashing isn't supported (IPA v4.2), hashed tables are zero size
- If hashing *is* supported, all hashed tables are the same size as
their non-hashed counterparts.
When validating the size of routing tables, require the AP to have
at least one entry (in addition to those used by the modem).
Signed-off-by: Alex Elder <elder@linaro.org>
---
drivers/net/ipa/ipa_table.c | 98 +++++++++++++++++++++++++++++++++++--
1 file changed, 94 insertions(+), 4 deletions(-)
@@ -134,9 +134,25 @@ static void ipa_table_validate_build(void)
BUILD_BUG_ON(IPA_ROUTE_COUNT_MAX > 32);
/* The modem must be allotted at least one route table entry */
BUILD_BUG_ON(!IPA_ROUTE_MODEM_COUNT);
- /* But it can't have more than what is available */
- BUILD_BUG_ON(IPA_ROUTE_MODEM_COUNT > IPA_ROUTE_COUNT_MAX);
+ /* AP must too, but we can't use more than what is available */
+ BUILD_BUG_ON(IPA_ROUTE_MODEM_COUNT >= IPA_ROUTE_COUNT_MAX);
+}
+static const struct ipa_mem *
+ipa_table_mem(struct ipa *ipa, bool filter, bool hashed, bool ipv6)
+{
+ enum ipa_mem_id mem_id;
+
+ mem_id = filter ? hashed ? ipv6 ? IPA_MEM_V6_FILTER_HASHED
+ : IPA_MEM_V4_FILTER_HASHED
+ : ipv6 ? IPA_MEM_V6_FILTER
+ : IPA_MEM_V4_FILTER
+ : hashed ? ipv6 ? IPA_MEM_V6_ROUTE_HASHED
+ : IPA_MEM_V4_ROUTE_HASHED
+ : ipv6 ? IPA_MEM_V6_ROUTE
+ : IPA_MEM_V4_ROUTE;
+
+ return ipa_mem_find(ipa, mem_id);
}
static bool
@@ -604,8 +620,77 @@ void ipa_table_config(struct ipa *ipa)
ipa_route_config(ipa, true);
}
-/*
- * Initialize a coherent DMA allocation containing initialized filter and
+/* Zero modem_route_count means filter table memory check */
+static bool ipa_table_mem_valid(struct ipa *ipa, bool modem_route_count)
+{
+ bool hash_support = ipa_table_hash_support(ipa);
+ bool filter = !modem_route_count;
+ const struct ipa_mem *mem_hashed;
+ const struct ipa_mem *mem_ipv4;
+ const struct ipa_mem *mem_ipv6;
+ u32 count;
+
+ /* IPv4 and IPv6 non-hashed tables are expected to be defined and
+ * have the same size. Both must have at least two entries (and
+ * would normally have more than that).
+ */
+ mem_ipv4 = ipa_table_mem(ipa, filter, false, false);
+ if (!mem_ipv4)
+ return false;
+
+ mem_ipv6 = ipa_table_mem(ipa, filter, false, true);
+ if (!mem_ipv6)
+ return false;
+
+ if (mem_ipv4->size != mem_ipv6->size)
+ return false;
+
+ /* Make sure the regions are big enough */
+ count = mem_ipv4->size / sizeof(__le64);
+ if (count < 2)
+ return false;
+ if (filter) {
+ /* Filter tables must able to hold the endpoint bitmap plus
+ * an entry for each endpoint that supports filtering
+ */
+ if (count < 1 + hweight32(ipa->filter_map))
+ return false;
+ } else {
+ /* Routing tables must be able to hold all modem entries,
+ * plus at least one entry for the AP.
+ */
+ if (count < modem_route_count + 1)
+ return false;
+ }
+
+ /* If hashing is supported, hashed tables are expected to be defined,
+ * and have the same size as non-hashed tables. If hashing is not
+ * supported, hashed tables are expected to have zero size (or not
+ * be defined).
+ */
+ mem_hashed = ipa_table_mem(ipa, filter, true, false);
+ if (hash_support) {
+ if (!mem_hashed || mem_hashed->size != mem_ipv4->size)
+ return false;
+ } else {
+ if (mem_hashed && mem_hashed->size)
+ return false;
+ }
+
+ /* Same check for IPv6 tables */
+ mem_hashed = ipa_table_mem(ipa, filter, true, true);
+ if (hash_support) {
+ if (!mem_hashed || mem_hashed->size != mem_ipv6->size)
+ return false;
+ } else {
+ if (mem_hashed && mem_hashed->size)
+ return false;
+ }
+
+ return true;
+}
+
+/* Initialize a coherent DMA allocation containing initialized filter and
* route table data. This is used when initializing or resetting the IPA
* filter or route table.
*
@@ -653,6 +738,11 @@ int ipa_table_init(struct ipa *ipa)
ipa_table_validate_build();
+ if (!ipa_table_mem_valid(ipa, 0))
+ return -EINVAL;
+ if (!ipa_table_mem_valid(ipa, IPA_ROUTE_MODEM_COUNT))
+ return -EINVAL;
+
/* The IPA hardware requires route and filter table rules to be
* aligned on a 128-byte boundary. We put the "zero rule" at the
* base of the table area allocated here. The DMA address returned