[4/4] arm64: dts: qcom: msm8996: add support for oneplus3(t)
Commit Message
Add initial support for OnePlus 3 and 3T mobile phones. They are based
on the MSM8996 SoC.
Co-developed-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Signed-off-by: Harry Austen <hpausten@protonmail.com>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../boot/dts/qcom/msm8996-oneplus-common.dtsi | 794 ++++++++++++++++++
arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts | 44 +
.../arm64/boot/dts/qcom/msm8996-oneplus3t.dts | 45 +
4 files changed, 885 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
--
2.38.1
Comments
On 21/10/2022 10:24, Harry Austen wrote:
> Add initial support for OnePlus 3 and 3T mobile phones. They are based
> on the MSM8996 SoC.
>
> Co-developed-by: Yassine Oudjana <y.oudjana@protonmail.com>
> Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
> Signed-off-by: Harry Austen <hpausten@protonmail.com>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 2 +
> .../boot/dts/qcom/msm8996-oneplus-common.dtsi | 794 ++++++++++++++++++
> arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts | 44 +
> .../arm64/boot/dts/qcom/msm8996-oneplus3t.dts | 45 +
> 4 files changed, 885 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus3.dts
> create mode 100644 arch/arm64/boot/dts/qcom/msm8996-oneplus3t.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index d7669a7cee9f..0380ac4fb196 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3t.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
> dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
> diff --git a/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> new file mode 100644
> index 000000000000..41eb6f28e9a4
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> @@ -0,0 +1,794 @@
> +// SPDX-License-Identifier: GPL-2.0-only
Are you sure this is GPL-2.0 only? Didn't you derive it from downstream
OnePlus DTS?
> +/*
> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> + */
> +
> +#include "msm8996.dtsi"
> +#include "pm8994.dtsi"
> +#include "pmi8994.dtsi"
> +#include "pmi8996.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/sound/qcom,q6afe.h>
> +#include <dt-bindings/sound/qcom,q6asm.h>
> +#include <dt-bindings/sound/qcom,wcd9335.h>
> +
> +/ {
> + aliases {
> + serial0 = &blsp1_uart2;
> + serial1 = &blsp2_uart2;
> + };
> +
> + battery: battery {
> + compatible = "simple-battery";
> +
> + constant-charge-current-max-microamp = <3000000>;
> + voltage-min-design-microvolt = <3400000>;
> + };
> +
> + chosen {
> + stdout-path = "serial1:115200n8";
> + };
> +
> + clocks {
> + compatible = "simple-bus";
This is not a bus of clocks...
> +
> + divclk4: divclk4 {
Use common suffix or prefix for node names and generic name.
This clock is anyway a bit weird - same frequency as sleep clk.
> + compatible = "fixed-clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&divclk4_pin_a>;
This is a PMIC pin? So is it a PMIC clk?
> + #clock-cells = <0>;
> + clock-frequency = <32768>;
> + clock-output-names = "divclk4";
> + };
> +
> + div1_mclk: divclk1 {
> + compatible = "gpio-gate-clock";
> + pinctrl-names = "default";
> + pinctrl-0 = <&audio_mclk>;
> + #clock-cells = <0>;
> + clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
> + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
> + };
> + };
> +
> + reserved-memory {
> + ramoops@ac000000 {
> + compatible = "ramoops";
> + reg = <0 0xac000000 0 0x200000>;
> + record-size = <0x20000>;
> + console-size = <0x100000>;
> + pmsg-size = <0x80000>;
> + };
> + };
> +
> + vph_pwr: vph-pwr-regulator {
> + compatible = "regulator-fixed";
> + regulator-name = "vph_pwr";
> + regulator-min-microvolt = <3700000>;
> + regulator-max-microvolt = <3700000>;
> + regulator-always-on;
> + regulator-boot-on;
> + };
> +
> + wlan_en: wlan-en-1-8v {
Use common suffix or prefix. You already used "-regulator" suffix before.
> + compatible = "regulator-fixed";
> + pinctrl-names = "default";
> + pinctrl-0 = <&wlan_en_gpios>;
> + regulator-name = "wlan-en-regulator";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> +
> + gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
> +
> + /* WLAN card specific delay */
> + startup-delay-us = <70000>;
> + enable-active-high;
> + };
> +};
> +
> +&adsp_pil {
> + status = "okay";
> +};
> +
> +&blsp1_i2c3 {
> + status = "okay";
> +
> + tfa9890_amp: audio-codec@36 {
> + compatible = "nxp,tfa9890";
> + reg = <0x36>;
> + #sound-dai-cells = <0>;
> + };
> +};
> +
> +&blsp1_i2c6 {
> + status = "okay";
> +
> + bq27541: fuel-gauge@55 {
> + compatible = "ti,bq27541";
> + reg = <0x55>;
> + };
> +};
> +
> +&blsp1_uart2 {
> + label = "BT-UART";
> + status = "okay";
Status is a last property.
> + uart-has-rtscts;
> +
> + bluetooth {
> + compatible = "qcom,qca6174-bt";
> + pinctrl-names = "default";
> + pinctrl-0 = <&bt_en_gpios>;
> + enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
> + clocks = <&divclk4>;
> + };
> +};
> +
> +&blsp2_i2c1 {
> + status = "okay";
> +};
> +
> +&blsp2_i2c6 {
> + status = "okay";
> +
> + synaptics_rmi4_i2c: touchscreen@20 {
> + compatible = "syna,rmi4-i2c";
> + reg = <0x20>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&touch_default>;
> + pinctrl-1 = <&touch_suspend>;
> + vdd-supply = <&vreg_l22a_3p0>;
> + vio-supply = <&vreg_s4a_1p8>;
> + syna,reset-delay-ms = <200>;
> + syna,startup-delay-ms = <200>;
> +
> + rmi4-f01@1 {
> + reg = <0x1>;
> + syna,nosleep-mode = <1>;
> + };
> +
> + rmi4-f12@12 {
> + reg = <0x12>;
> + syna,sensor-type = <1>;
> + touchscreen-x-mm = <68>;
> + touchscreen-y-mm = <122>;
> + };
> + };
> +};
> +
> +&blsp2_uart2 {
> + status = "okay";
Status is last.
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&blsp2_uart2_2pins_default>;
> + pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
> +};
> +
> +&camss {
> + vdda-supply = <&vreg_l2a_1p25>;
> +};
> +
> +&dsi0 {
> + status = "okay";
And so on...
> +
> + vdda-supply = <&vreg_l2a_1p25>;
> + vcca-supply = <&vreg_l22a_3p0>;
> +};
Best regards,
Krzysztof
On Friday, October 21st, 2022 at 3:44 PM, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
[...]
> > +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
> > @@ -0,0 +1,794 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
>
>
> Are you sure this is GPL-2.0 only? Didn't you derive it from downstream
> OnePlus DTS?
Yes development of these devicetrees was aided by downstream DTS, all of which appear to have
GPL-2.0 only headers, e.g. see msm8996-mtp.dts [1].
>
> > +/*
> > + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
> > + */
> > +
> > +#include "msm8996.dtsi"
> > +#include "pm8994.dtsi"
> > +#include "pmi8994.dtsi"
> > +#include "pmi8996.dtsi"
> > +#include <dt-bindings/gpio/gpio.h>
> > +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> > +#include <dt-bindings/sound/qcom,q6afe.h>
> > +#include <dt-bindings/sound/qcom,q6asm.h>
> > +#include <dt-bindings/sound/qcom,wcd9335.h>
> > +
> > +/ {
> > + aliases {
> > + serial0 = &blsp1_uart2;
> > + serial1 = &blsp2_uart2;
> > + };
> > +
> > + battery: battery {
> > + compatible = "simple-battery";
> > +
> > + constant-charge-current-max-microamp = <3000000>;
> > + voltage-min-design-microvolt = <3400000>;
> > + };
> > +
> > + chosen {
> > + stdout-path = "serial1:115200n8";
> > + };
> > +
> > + clocks {
> > + compatible = "simple-bus";
>
>
> This is not a bus of clocks...
Will remove in v2.
>
> > +
> > + divclk4: divclk4 {
>
>
> Use common suffix or prefix for node names and generic name.
>
> This clock is anyway a bit weird - same frequency as sleep clk.
>
> > + compatible = "fixed-clock";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&divclk4_pin_a>;
>
>
> This is a PMIC pin? So is it a PMIC clk?
These two clocks are described in the same way as other current MSM8996 DTs (e.g. apq8096-db820c.dts
and msm8996-xiaomi-common.dtsi). Happy to change if you think there is a better way to describe them?
Yes, these clocks originate from within the PM8994 PMIC as per the datasheet [2]. GPIO_15 is
configured with the DIV_CLK1 alt function and routes to the MCLK pin of the WCD9225 audio codec.
GPIO_18 is configured with the SLEEP_CLK5 alt function and provides the SUSCLK_32KHZ input to the
Atheros QCA6174 WiFi/BT chip.
>
> > + #clock-cells = <0>;
> > + clock-frequency = <32768>;
> > + clock-output-names = "divclk4";
> > + };
> > +
> > + div1_mclk: divclk1 {
> > + compatible = "gpio-gate-clock";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&audio_mclk>;
> > + #clock-cells = <0>;
> > + clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
> > + enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
> > + };
> > + };
> > +
> > + reserved-memory {
> > + ramoops@ac000000 {
> > + compatible = "ramoops";
> > + reg = <0 0xac000000 0 0x200000>;
> > + record-size = <0x20000>;
> > + console-size = <0x100000>;
> > + pmsg-size = <0x80000>;
> > + };
> > + };
> > +
> > + vph_pwr: vph-pwr-regulator {
> > + compatible = "regulator-fixed";
> > + regulator-name = "vph_pwr";
> > + regulator-min-microvolt = <3700000>;
> > + regulator-max-microvolt = <3700000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + wlan_en: wlan-en-1-8v {
>
>
> Use common suffix or prefix. You already used "-regulator" suffix before.
Will fix in v2.
>
> > + compatible = "regulator-fixed";
> > + pinctrl-names = "default";
> > + pinctrl-0 = <&wlan_en_gpios>;
> > + regulator-name = "wlan-en-regulator";
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > +
> > + gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
> > +
> > + /* WLAN card specific delay */
> > + startup-delay-us = <70000>;
> > + enable-active-high;
> > + };
> > +};
> > +
> > +&adsp_pil {
> > + status = "okay";
> > +};
> > +
> > +&blsp1_i2c3 {
> > + status = "okay";
> > +
> > + tfa9890_amp: audio-codec@36 {
> > + compatible = "nxp,tfa9890";
> > + reg = <0x36>;
> > + #sound-dai-cells = <0>;
> > + };
> > +};
> > +
> > +&blsp1_i2c6 {
> > + status = "okay";
> > +
> > + bq27541: fuel-gauge@55 {
> > + compatible = "ti,bq27541";
> > + reg = <0x55>;
> > + };
> > +};
> > +
> > +&blsp1_uart2 {
> > + label = "BT-UART";
> > + status = "okay";
>
>
> Status is a last property.
Will fix all of these in v2.
>
> Best regards,
> Krzysztof
Thanks for the review!
Harry
[1]: https://github.com/OnePlusOSS/android_kernel_oneplus_msm8996/blob/oneplus3/6.0.1/arch/arm/boot/dts/qcom/msm8996-mtp.dtsi
[2]: https://developer.qualcomm.com/qfile/35466/lm80-p2751-5_c.pdf
On 22/10/2022 06:38, Harry Austen wrote:
> On Friday, October 21st, 2022 at 3:44 PM, Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:
> [...]
>>> +++ b/arch/arm64/boot/dts/qcom/msm8996-oneplus-common.dtsi
>>> @@ -0,0 +1,794 @@
>>> +// SPDX-License-Identifier: GPL-2.0-only
>>
>>
>> Are you sure this is GPL-2.0 only? Didn't you derive it from downstream
>> OnePlus DTS?
>
> Yes development of these devicetrees was aided by downstream DTS, all of which appear to have
> GPL-2.0 only headers, e.g. see msm8996-mtp.dts [1].
OK, but then below copyright is not correct:
>
>>
>>> +/*
>>> + * Copyright (c) 2022, The Linux Foundation. All rights reserved.
... unless you work for The Linux Foundation?
>>> + */
>>> +
>>> +#include "msm8996.dtsi"
>>> +#include "pm8994.dtsi"
>>> +#include "pmi8994.dtsi"
>>> +#include "pmi8996.dtsi"
>>> +#include <dt-bindings/gpio/gpio.h>
>>> +#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
>>> +#include <dt-bindings/sound/qcom,q6afe.h>
>>> +#include <dt-bindings/sound/qcom,q6asm.h>
>>> +#include <dt-bindings/sound/qcom,wcd9335.h>
>>> +
>>> +/ {
>>> + aliases {
>>> + serial0 = &blsp1_uart2;
>>> + serial1 = &blsp2_uart2;
>>> + };
>>> +
>>> + battery: battery {
>>> + compatible = "simple-battery";
>>> +
>>> + constant-charge-current-max-microamp = <3000000>;
>>> + voltage-min-design-microvolt = <3400000>;
>>> + };
>>> +
>>> + chosen {
>>> + stdout-path = "serial1:115200n8";
>>> + };
>>> +
>>> + clocks {
>>> + compatible = "simple-bus";
>>
>>
>> This is not a bus of clocks...
>
> Will remove in v2.
>
>>
>>> +
>>> + divclk4: divclk4 {
>>
>>
>> Use common suffix or prefix for node names and generic name.
>>
>> This clock is anyway a bit weird - same frequency as sleep clk.
>>
>>> + compatible = "fixed-clock";
>>> + pinctrl-names = "default";
>>> + pinctrl-0 = <&divclk4_pin_a>;
>>
>>
>> This is a PMIC pin? So is it a PMIC clk?
>
> These two clocks are described in the same way as other current MSM8996 DTs (e.g. apq8096-db820c.dts
> and msm8996-xiaomi-common.dtsi). Happy to change if you think there is a better way to describe them?
> Yes, these clocks originate from within the PM8994 PMIC as per the datasheet [2]. GPIO_15 is
> configured with the DIV_CLK1 alt function and routes to the MCLK pin of the WCD9225 audio codec.
> GPIO_18 is configured with the SLEEP_CLK5 alt function and provides the SUSCLK_32KHZ input to the
> Atheros QCA6174 WiFi/BT chip.
So this is SLEEP_CLK - a PMIC generated 32 kHz clock, which is quite
typical among many PMIC designs. Representing it like this a bit
hack/workaround and proper way is to have proper clock driver.
But on the other hand, this is much easier and already such pattern was
introduced with MSM8996 Xiaomi, so fine by me.
Just name the nodes generic.
Best regards,
Krzysztof
@@ -33,6 +33,8 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-satsuki.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-suzuran.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8996-oneplus3t.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-dora.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-kagura.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-sony-xperia-tone-keyaki.dtb
new file mode 100644
@@ -0,0 +1,794 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include "msm8996.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include "pmi8996.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
+#include <dt-bindings/sound/qcom,wcd9335.h>
+
+/ {
+ aliases {
+ serial0 = &blsp1_uart2;
+ serial1 = &blsp2_uart2;
+ };
+
+ battery: battery {
+ compatible = "simple-battery";
+
+ constant-charge-current-max-microamp = <3000000>;
+ voltage-min-design-microvolt = <3400000>;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ clocks {
+ compatible = "simple-bus";
+
+ divclk4: divclk4 {
+ compatible = "fixed-clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&divclk4_pin_a>;
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ clock-output-names = "divclk4";
+ };
+
+ div1_mclk: divclk1 {
+ compatible = "gpio-gate-clock";
+ pinctrl-names = "default";
+ pinctrl-0 = <&audio_mclk>;
+ #clock-cells = <0>;
+ clocks = <&rpmcc RPM_SMD_DIV_CLK1>;
+ enable-gpios = <&pm8994_gpios 15 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ reserved-memory {
+ ramoops@ac000000 {
+ compatible = "ramoops";
+ reg = <0 0xac000000 0 0x200000>;
+ record-size = <0x20000>;
+ console-size = <0x100000>;
+ pmsg-size = <0x80000>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ wlan_en: wlan-en-1-8v {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wlan_en_gpios>;
+ regulator-name = "wlan-en-regulator";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&pm8994_gpios 8 GPIO_ACTIVE_HIGH>;
+
+ /* WLAN card specific delay */
+ startup-delay-us = <70000>;
+ enable-active-high;
+ };
+};
+
+&adsp_pil {
+ status = "okay";
+};
+
+&blsp1_i2c3 {
+ status = "okay";
+
+ tfa9890_amp: audio-codec@36 {
+ compatible = "nxp,tfa9890";
+ reg = <0x36>;
+ #sound-dai-cells = <0>;
+ };
+};
+
+&blsp1_i2c6 {
+ status = "okay";
+
+ bq27541: fuel-gauge@55 {
+ compatible = "ti,bq27541";
+ reg = <0x55>;
+ };
+};
+
+&blsp1_uart2 {
+ label = "BT-UART";
+ status = "okay";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "qcom,qca6174-bt";
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_en_gpios>;
+ enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
+ clocks = <&divclk4>;
+ };
+};
+
+&blsp2_i2c1 {
+ status = "okay";
+};
+
+&blsp2_i2c6 {
+ status = "okay";
+
+ synaptics_rmi4_i2c: touchscreen@20 {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x20>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&touch_default>;
+ pinctrl-1 = <&touch_suspend>;
+ vdd-supply = <&vreg_l22a_3p0>;
+ vio-supply = <&vreg_s4a_1p8>;
+ syna,reset-delay-ms = <200>;
+ syna,startup-delay-ms = <200>;
+
+ rmi4-f01@1 {
+ reg = <0x1>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ touchscreen-x-mm = <68>;
+ touchscreen-y-mm = <122>;
+ };
+ };
+};
+
+&blsp2_uart2 {
+ status = "okay";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp2_uart2_2pins_default>;
+ pinctrl-1 = <&blsp2_uart2_2pins_sleep>;
+};
+
+&camss {
+ vdda-supply = <&vreg_l2a_1p25>;
+};
+
+&dsi0 {
+ status = "okay";
+
+ vdda-supply = <&vreg_l2a_1p25>;
+ vcca-supply = <&vreg_l22a_3p0>;
+};
+
+&dsi0_out {
+ data-lanes = <0 1 2 3>;
+};
+
+&dsi0_phy {
+ status = "okay";
+
+ vdda-supply = <&vreg_l2a_1p25>;
+ vcca-supply = <&vreg_l28a_0p925>;
+};
+
+&gpu {
+ status = "okay";
+};
+
+&hsusb_phy1 {
+ status = "okay";
+
+ vdd-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&hsusb_phy2 {
+ status = "okay";
+
+ vdd-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vdda-phy-dpdm-supply = <&vreg_l24a_3p075>;
+};
+
+&mdp {
+ status = "okay";
+};
+
+&mdss {
+ status = "okay";
+};
+
+&mmcc {
+ vdd-gfx-supply = <&vdd_gfx>;
+};
+
+&mss_pil {
+ status = "okay";
+
+ pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pcie0 {
+ status = "okay";
+ perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
+ vddpe-3v3-supply = <&wlan_en>;
+ vdda-supply = <&vreg_l28a_0p925>;
+};
+
+&pcie_phy {
+ status = "okay";
+ vdda-phy-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+};
+
+&pm8994_gpios {
+ bt_en_gpios: bt-en-gpios-state {
+ pins = "gpio19";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+
+ wlan_en_gpios: wlan-en-gpios-state {
+ pins = "gpio8";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ output-low;
+ power-source = <PM8994_GPIO_S4>;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+ bias-pull-down;
+ };
+
+ audio_mclk: divclk1-state {
+ pins = "gpio15";
+ function = PMIC_GPIO_FUNC_FUNC1;
+ power-source = <PM8994_GPIO_S4>;
+ };
+
+ divclk4_pin_a: divclk4-state {
+ pins = "gpio18";
+ function = PMIC_GPIO_FUNC_FUNC2;
+ bias-disable;
+ power-source = <PM8994_GPIO_S4>;
+ };
+};
+
+&pm8994_spmi_regulators {
+ qcom,saw-reg = <&saw3>;
+
+ s9 {
+ qcom,saw-slave;
+ };
+
+ s10 {
+ qcom,saw-slave;
+ };
+
+ s11 {
+ qcom,saw-leader;
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1140000>;
+ regulator-max-step-microvolt = <150000>;
+ regulator-always-on;
+ };
+};
+
+&pmi8994_spmi_regulators {
+ vdd_gfx: s2 {
+ regulator-name = "vdd-gfx";
+ regulator-min-microvolt = <980000>;
+ regulator-max-microvolt = <1230000>;
+ };
+};
+
+&q6asmdai {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dai@0 {
+ reg = <0>;
+ };
+
+ dai@1 {
+ reg = <1>;
+ };
+
+ dai@2 {
+ reg = <2>;
+ };
+};
+
+&rpm_requests {
+ regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vreg_s3a_1p3: s3 {
+ regulator-name = "vreg_s3a_1p3";
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ vreg_s4a_1p8: s4 {
+ regulator-name = "vreg_s4a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ vreg_s5a_2p15: s5 {
+ regulator-name = "vreg_s5a_2p15";
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ vreg_s7a_0p8: s7 {
+ regulator-name = "vreg_s7a_0p8";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ vreg_l1a_1p0: l1 {
+ regulator-name = "vreg_l1a_1p0";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ vreg_l2a_1p25: l2 {
+ regulator-name = "vreg_l2a_1p25";
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l3a_1p1: l3 {
+ regulator-name = "vreg_l3a_1p1";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_l4a_1p225: l4 {
+ regulator-name = "vreg_l4a_1p225";
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ vreg_l6a_1p2: l6 {
+ regulator-name = "vreg_l6a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l7a_1p8: l7 {
+ regulator-name = "vreg_l7a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l9a_1p8: l9 {
+ regulator-name = "vreg_l9a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l10a_1p8: l10 {
+ regulator-name = "vreg_l10a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l11a_1p15: l11 {
+ regulator-name = "vreg_l11a_1p15";
+ regulator-min-microvolt = <1150000>;
+ regulator-max-microvolt = <1150000>;
+ };
+
+ vreg_l12a_1p8: l12 {
+ regulator-name = "vreg_l12a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l13a_2p95: l13 {
+ regulator-name = "vreg_l13a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ vreg_l16a_2p7: l16 {
+ regulator-name = "vreg_l16a_2p7";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ vreg_l17a_2p6: l17 {
+ regulator-name = "vreg_l17a_2p6";
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2600000>;
+ };
+
+ vreg_l18a_3p3: l18 {
+ regulator-name = "vreg_l18a_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l19a_3p0: l19 {
+ regulator-name = "vreg_l19a_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vreg_l20a_2p95: l20 {
+ regulator-name = "vreg_l20a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l21a_2p95: l21 {
+ regulator-name = "vreg_l21a_2p95";
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-allow-set-load;
+ regulator-system-load = <200000>;
+ };
+
+ vreg_l22a_3p0: l22 {
+ regulator-name = "vreg_l22a_3p0";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ vreg_l23a_2p8: l23 {
+ regulator-name = "vreg_l23a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vreg_l24a_3p075: l24 {
+ regulator-name = "vreg_l24a_3p075";
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3075000>;
+ };
+
+ vreg_l25a_1p2: l25 {
+ regulator-name = "vreg_l25a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-allow-set-load;
+ regulator-always-on;
+ };
+
+ vreg_l27a_1p2: l27 {
+ regulator-name = "vreg_l27a_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l28a_0p925: l28 {
+ regulator-name = "vreg_l28a_0p925";
+ regulator-min-microvolt = <925000>;
+ regulator-max-microvolt = <925000>;
+ regulator-allow-set-load;
+ };
+
+ vreg_l29a_2p8: l29 {
+ regulator-name = "vreg_l29a_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ vreg_l30a_1p8: l30 {
+ regulator-name = "vreg_l30a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_l32a_1p8: l32 {
+ regulator-name = "vreg_l32a_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+};
+
+&slpi_pil {
+ status = "okay";
+};
+
+&sound {
+ compatible = "qcom,apq8096-sndcard";
+ model = "OnePlus3";
+ audio-routing = "RX_BIAS", "MCLK",
+ "AMIC2", "MIC BIAS2",
+ "MIC BIAS2", "Headset Mic",
+ "AMIC4", "MIC BIAS1",
+ "MIC BIAS1", "Primary Mic",
+ "AMIC5", "MIC BIAS3",
+ "MIC BIAS3", "Noise Mic";
+
+ mm1-dai-link {
+ link-name = "MultiMedia1";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+ };
+ };
+
+ mm2-dai-link {
+ link-name = "MultiMedia2";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA2>;
+ };
+ };
+
+ mm3-dai-link {
+ link-name = "MultiMedia3";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA3>;
+ };
+ };
+
+ mm4-dai-link {
+ link-name = "MultiMedia4";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA4>;
+ };
+ };
+
+ mm5-dai-link {
+ link-name = "MultiMedia5";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA5>;
+ };
+ };
+
+ mm6-dai-link {
+ link-name = "MultiMedia6";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA6>;
+ };
+ };
+
+ mm7-dai-link {
+ link-name = "MultiMedia7";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA7>;
+ };
+ };
+
+ mm8-dai-link {
+ link-name = "MultiMedia8";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA8>;
+ };
+ };
+
+ mm9-dai-link {
+ link-name = "MultiMedia9";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA9>;
+ };
+ };
+
+ mm10-dai-link {
+ link-name = "MultiMedia10";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA10>;
+ };
+ };
+
+ mm11-dai-link {
+ link-name = "MultiMedia11";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA11>;
+ };
+ };
+
+ mm12-dai-link {
+ link-name = "MultiMedia12";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA12>;
+ };
+ };
+
+ mm13-dai-link {
+ link-name = "MultiMedia13";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA13>;
+ };
+ };
+
+ mm14-dai-link {
+ link-name = "MultiMedia14";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA14>;
+ };
+ };
+
+ mm15-dai-link {
+ link-name = "MultiMedia15";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA15>;
+ };
+ };
+
+ mm16-dai-link {
+ link-name = "MultiMedia16";
+
+ cpu {
+ sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA16>;
+ };
+ };
+
+ slim-dai-link {
+ link-name = "SLIM Playback";
+
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_6_RX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 AIF4_PB>;
+ };
+ };
+
+ slimcap-dai-link {
+ link-name = "SLIM Capture";
+
+ cpu {
+ sound-dai = <&q6afedai SLIMBUS_0_TX>;
+ };
+
+ platform {
+ sound-dai = <&q6routing>;
+ };
+
+ codec {
+ sound-dai = <&wcd9335 AIF1_CAP>;
+ };
+ };
+
+ speaker-dai-link {
+ link-name = "Speaker";
+
+ cpu {
+ sound-dai = <&q6afedai QUATERNARY_MI2S_RX>;
+ };
+
+ codec {
+ sound-dai = <&tfa9890_amp>;
+ };
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <81 4>;
+
+ mdss_dsi_active: mdss-dsi-active-state {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <8>;
+ bias-disable;
+ };
+
+ mdss_dsi_suspend: mdss-dsi-suspend-state {
+ pins = "gpio8";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mdss_te_active: mdss-te-active-state {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ mdss_te_suspend: mdss-te-suspend-state {
+ pins = "gpio10";
+ function = "mdp_vsync";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ touch_default: touch-default-state {
+ pins = "gpio89", "gpio125", "gpio49";
+ function = "gpio";
+ drive-strength = <16>;
+ bias-pull-up;
+ };
+
+ touch_suspend: touch-suspend-state {
+ pins = "gpio89", "gpio125", "gpio49";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&ufsphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vreg_l28a_0p925>;
+ vdda-pll-supply = <&vreg_l12a_1p8>;
+ vddp-ref-clk-supply = <&vreg_l25a_1p2>;
+};
+
+&ufshc {
+ status = "okay";
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vccq-supply = <&vreg_l25a_1p2>;
+ vccq2-supply = <&vreg_s4a_1p8>;
+
+ vcc-max-microamp = <600000>;
+ vccq-max-microamp = <450000>;
+ vccq2-max-microamp = <450000>;
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ phys = <&hsusb_phy1>;
+ phy-names = "usb2-phy";
+
+ maximum-speed = "high-speed";
+};
+
+&venus {
+ status = "okay";
+};
+
+&wcd9335 {
+ clock-names = "mclk", "slimbus";
+ clocks = <&div1_mclk>,
+ <&rpmcc RPM_SMD_BB_CLK1>;
+
+ vdd-buck-supply = <&vreg_s4a_1p8>;
+ vdd-buck-sido-supply = <&vreg_s4a_1p8>;
+ vdd-tx-supply = <&vreg_s4a_1p8>;
+ vdd-rx-supply = <&vreg_s4a_1p8>;
+ vdd-io-supply = <&vreg_s4a_1p8>;
+};
new file mode 100644
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 3";
+ compatible = "oneplus,oneplus3", "qcom,msm8996";
+ chassis-type = "handset";
+ qcom,board-id = <8 0 15801 15>, <8 0 15801 16>;
+ qcom,msm-id = <246 0x30001>;
+};
+
+&adsp_pil {
+ firmware-name = "qcom/msm8996/oneplus3/adsp.mbn";
+};
+
+&battery {
+ charge-full-design-microamp-hours = <3000000>;
+ voltage-max-design-microvolt = <4350000>;
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/oneplus3/a530_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/msm8996/oneplus3/mba.mbn",
+ "qcom/msm8996/oneplus3/modem.mbn";
+};
+
+&slpi_pil {
+ firmware-name = "qcom/msm8996/oneplus3/slpi.mbn";
+};
+
+&venus {
+ firmware-name = "qcom/msm8996/oneplus3/venus.mbn";
+};
new file mode 100644
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "msm8996-oneplus-common.dtsi"
+
+/ {
+ model = "OnePlus 3T";
+ compatible = "oneplus,oneplus3t", "qcom,msm8996";
+ chassis-type = "handset";
+ qcom,board-id = <8 0 15811 26>,
+ <8 0 15811 27>,
+ <8 0 15811 28>;
+};
+
+&adsp_pil {
+ firmware-name = "qcom/msm8996/oneplus3t/adsp.mbn";
+};
+
+&battery {
+ charge-full-design-microamp-hours = <3400000>;
+ voltage-max-design-microvolt = <4400000>;
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/msm8996/oneplus3t/a530_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/msm8996/oneplus3t/mba.mbn",
+ "qcom/msm8996/oneplus3t/modem.mbn";
+};
+
+&slpi_pil {
+ firmware-name = "qcom/msm8996/oneplus3t/slpi.mbn";
+};
+
+&venus {
+ firmware-name = "qcom/msm8996/oneplus3t/venus.mbn";
+};