[net-next,v5,1/5] net: dt-bindings: Introduce the Qualcomm IPQESS Ethernet controller

  Add the DT binding for the IPQESS Ethernet Controller. This is a simple
controller, only requiring the phy-mode, interrupts, clocks, and
possibly a MAC address setting.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
V4->V5:
 - Remove stray quotes arount the ref property
 - Rename the binding to match the compatible string
V3->V4:
 - Fix a binding typo in the compatible string
V2->V3:
 - Cleanup on reset and clock names
V1->V2:
 - Fixed the example
 - Added reset and clocks
 - Removed generic ethernet attributes
 .../bindings/net/qcom,ipq4019-ess-edma.yaml   | 95 +++++++++++++++++++
 1 file changed, 95 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml
  

On 21/10/2022 08:45, Maxime Chevallier wrote:
> Add the DT binding for the IPQESS Ethernet Controller. This is a simple
> controller, only requiring the phy-mode, interrupts, clocks, and
> possibly a MAC address setting.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> V4->V5:
>  - Remove stray quotes arount the ref property
>  - Rename the binding to match the compatible string

Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
  

On Fri, Oct 21, 2022 at 02:45:52PM +0200, Maxime Chevallier wrote:
> +  interrupts:
> +    minItems: 2
> +    maxItems: 32
> +    description: One interrupt per tx and rx queue, with up to 16 queues.

What does the binding require in terms of ordering, exactly? Whose
interrupt is the 7th one (GIC_SPI 71 in your example)? RX/TX of which
queue?

> +
> +  clocks:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - resets
> +  - phy-mode
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/clock/qcom,gcc-ipq4019.h>
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/interrupt-controller/irq.h>
> +    gmac: ethernet@c080000 {
> +        compatible = "qcom,ipq4019-ess-edma";
> +        reg = <0xc080000 0x8000>;
> +        resets = <&gcc ESS_RESET>;
> +        clocks = <&gcc GCC_ESS_CLK>;
> +        interrupts = <GIC_SPI  65 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  66 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  67 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  68 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  69 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  70 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  71 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  72 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  73 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  74 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  75 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  76 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  77 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  78 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  79 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI  80 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 240 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 241 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 242 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 243 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 244 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 245 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 246 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 247 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 248 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 249 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 250 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 251 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 252 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 253 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 254 IRQ_TYPE_EDGE_RISING>,
> +                     <GIC_SPI 255 IRQ_TYPE_EDGE_RISING>;
> +
> +        phy-mode = "internal";

I think empty lines are typically added between properties and nodes
(and between nodes on the same hierarchy), rather than between 2
properties.

> +        fixed-link {
> +            speed = <1000>;
> +            full-duplex;
> +            pause;
> +            asym-pause;

Any particular reason for "asym-pause"? Looking at the comment above
linkmode_resolve_pause(), I don't think it makes any difference to the
flow control resolution (link partner AsmDir is "don't care" when we
have MAC_SYM_PAUSE in mac_capabilities and the "fixed-link" node -
effectively the link partner - also has "pause").

> +        };
> +    };
> +
> +...
> -- 
> 2.37.3
>
  

On Fri, 21 Oct 2022 14:45:52 +0200, Maxime Chevallier wrote:
> Add the DT binding for the IPQESS Ethernet Controller. This is a simple
> controller, only requiring the phy-mode, interrupts, clocks, and
> possibly a MAC address setting.
> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
> V4->V5:
>  - Remove stray quotes arount the ref property
>  - Rename the binding to match the compatible string
> V3->V4:
>  - Fix a binding typo in the compatible string
> V2->V3:
>  - Cleanup on reset and clock names
> V1->V2:
>  - Fixed the example
>  - Added reset and clocks
>  - Removed generic ethernet attributes
>  .../bindings/net/qcom,ipq4019-ess-edma.yaml   | 95 +++++++++++++++++++
>  1 file changed, 95 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
./Documentation/devicetree/bindings/net/qcom,ipq4019-ess-edma.yaml: $id: relative path/filename doesn't match actual path or filename
	expected: http://devicetree.org/schemas/net/qcom,ipq4019-ess-edma.yaml#

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.