On Thu, Oct 20, 2022 at 11:03:18PM +0200, Martin Blumenstingl wrote:
> Move over to regmap's built-in caching instead of adding a custom
> caching implementation. This works for JC42_REG_TEMP_UPPER,
> JC42_REG_TEMP_LOWER and JC42_REG_TEMP_CRITICAL as these values never
> change except when explicitly written. For JC42_REG_TEMP a cache
> variable is still kept as regmap cannot cache this register (because
> it's volatile, meaning it can change at any time).
>
Just drop that one as well, together with jc42_update_device(),
and read the temperature directly where needed. In practice
caching of 'hot' registers isn't really worth the trouble.
Thanks,
Guenter
> Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
> ---
> drivers/hwmon/jc42.c | 97 ++++++++++++++++++++++++--------------------
> 1 file changed, 54 insertions(+), 43 deletions(-)
>
> diff --git a/drivers/hwmon/jc42.c b/drivers/hwmon/jc42.c
> index 329a80264556..3f524ab5451c 100644
> --- a/drivers/hwmon/jc42.c
> +++ b/drivers/hwmon/jc42.c
> @@ -200,21 +200,6 @@ static struct jc42_chips jc42_chips[] = {
> { STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
> };
>
> -enum temp_index {
> - t_input = 0,
> - t_crit,
> - t_min,
> - t_max,
> - t_num_temp
> -};
> -
> -static const u8 temp_regs[t_num_temp] = {
> - [t_input] = JC42_REG_TEMP,
> - [t_crit] = JC42_REG_TEMP_CRITICAL,
> - [t_min] = JC42_REG_TEMP_LOWER,
> - [t_max] = JC42_REG_TEMP_UPPER,
> -};
> -
> /* Each client has this additional data */
> struct jc42_data {
> struct regmap *regmap;
> @@ -224,7 +209,7 @@ struct jc42_data {
> unsigned long last_updated; /* In jiffies */
> u16 orig_config; /* original configuration */
> u16 config; /* current configuration */
> - u16 temp[t_num_temp];/* Temperatures */
> + u16 temp; /* Cached temperature register value */
@@ -200,21 +200,6 @@ static struct jc42_chips jc42_chips[] = {
{ STM_MANID, STTS3000_DEVID, STTS3000_DEVID_MASK },
};
-enum temp_index {
- t_input = 0,
- t_crit,
- t_min,
- t_max,
- t_num_temp
-};
-
-static const u8 temp_regs[t_num_temp] = {
- [t_input] = JC42_REG_TEMP,
- [t_crit] = JC42_REG_TEMP_CRITICAL,
- [t_min] = JC42_REG_TEMP_LOWER,
- [t_max] = JC42_REG_TEMP_UPPER,
-};
-
/* Each client has this additional data */
struct jc42_data {
struct regmap *regmap;
@@ -224,7 +209,7 @@ struct jc42_data {
unsigned long last_updated; /* In jiffies */
u16 orig_config; /* original configuration */
u16 config; /* current configuration */
- u16 temp[t_num_temp];/* Temperatures */
+ u16 temp; /* Cached temperature register value */
};
#define JC42_TEMP_MIN_EXTENDED (-40000)
@@ -252,18 +237,17 @@ static int jc42_temp_from_reg(s16 reg)
static struct jc42_data *jc42_update_device(struct device *dev)
{
struct jc42_data *data = dev_get_drvdata(dev);
- unsigned int i, val;
+ unsigned int val;
int ret;
mutex_lock(&data->update_lock);
if (time_after(jiffies, data->last_updated + HZ) || !data->valid) {
- for (i = 0; i < t_num_temp; i++) {
- ret = regmap_read(data->regmap, temp_regs[i], &val);
- if (ret)
- goto abort;
- data->temp[i] = val;
- }
+ ret = regmap_read(data->regmap, JC42_REG_TEMP, &val);
+ if (ret)
+ goto abort;
+
+ data->temp = val;
data->last_updated = jiffies;
data->valid = true;
}
@@ -276,44 +260,67 @@ static int jc42_read(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long *val)
{
struct jc42_data *data = jc42_update_device(dev);
- int temp, hyst;
+ unsigned int regval;
+ int ret, temp, hyst;
if (IS_ERR(data))
return PTR_ERR(data);
switch (attr) {
case hwmon_temp_input:
- *val = jc42_temp_from_reg(data->temp[t_input]);
+ *val = jc42_temp_from_reg(data->temp);
return 0;
case hwmon_temp_min:
- *val = jc42_temp_from_reg(data->temp[t_min]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_LOWER, ®val);
+ if (ret)
+ return ret;
+
+ *val = jc42_temp_from_reg(regval);
return 0;
case hwmon_temp_max:
- *val = jc42_temp_from_reg(data->temp[t_max]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val);
+ if (ret)
+ return ret;
+
+ *val = jc42_temp_from_reg(regval);
return 0;
case hwmon_temp_crit:
- *val = jc42_temp_from_reg(data->temp[t_crit]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
+ ®val);
+ if (ret)
+ return ret;
+
+ *val = jc42_temp_from_reg(regval);
return 0;
case hwmon_temp_max_hyst:
- temp = jc42_temp_from_reg(data->temp[t_max]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_UPPER, ®val);
+ if (ret)
+ return ret;
+
+ temp = jc42_temp_from_reg(regval);
hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
>> JC42_CFG_HYST_SHIFT];
*val = temp - hyst;
return 0;
case hwmon_temp_crit_hyst:
- temp = jc42_temp_from_reg(data->temp[t_crit]);
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
+ ®val);
+ if (ret)
+ return ret;
+
+ temp = jc42_temp_from_reg(regval);
hyst = jc42_hysteresis[(data->config & JC42_CFG_HYST_MASK)
>> JC42_CFG_HYST_SHIFT];
*val = temp - hyst;
return 0;
case hwmon_temp_min_alarm:
- *val = (data->temp[t_input] >> JC42_ALARM_MIN_BIT) & 1;
+ *val = (data->temp >> JC42_ALARM_MIN_BIT) & 1;
return 0;
case hwmon_temp_max_alarm:
- *val = (data->temp[t_input] >> JC42_ALARM_MAX_BIT) & 1;
+ *val = (data->temp >> JC42_ALARM_MAX_BIT) & 1;
return 0;
case hwmon_temp_crit_alarm:
- *val = (data->temp[t_input] >> JC42_ALARM_CRIT_BIT) & 1;
+ *val = (data->temp >> JC42_ALARM_CRIT_BIT) & 1;
return 0;
default:
return -EOPNOTSUPP;
@@ -324,6 +331,7 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
u32 attr, int channel, long val)
{
struct jc42_data *data = dev_get_drvdata(dev);
+ unsigned int regval;
int diff, hyst;
int ret;
@@ -331,21 +339,23 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
switch (attr) {
case hwmon_temp_min:
- data->temp[t_min] = jc42_temp_to_reg(val, data->extended);
- ret = regmap_write(data->regmap, temp_regs[t_min],
- data->temp[t_min]);
+ ret = regmap_write(data->regmap, JC42_REG_TEMP_LOWER,
+ jc42_temp_to_reg(val, data->extended));
break;
case hwmon_temp_max:
- data->temp[t_max] = jc42_temp_to_reg(val, data->extended);
- ret = regmap_write(data->regmap, temp_regs[t_max],
- data->temp[t_max]);
+ ret = regmap_write(data->regmap, JC42_REG_TEMP_UPPER,
+ jc42_temp_to_reg(val, data->extended));
break;
case hwmon_temp_crit:
- data->temp[t_crit] = jc42_temp_to_reg(val, data->extended);
- ret = regmap_write(data->regmap, temp_regs[t_crit],
- data->temp[t_crit]);
+ ret = regmap_write(data->regmap, JC42_REG_TEMP_CRITICAL,
+ jc42_temp_to_reg(val, data->extended));
break;
case hwmon_temp_crit_hyst:
+ ret = regmap_read(data->regmap, JC42_REG_TEMP_CRITICAL,
+ ®val);
+ if (ret)
+ return ret;
+
/*
* JC42.4 compliant chips only support four hysteresis values.
* Pick best choice and go from there.
@@ -353,7 +363,7 @@ static int jc42_write(struct device *dev, enum hwmon_sensor_types type,
val = clamp_val(val, (data->extended ? JC42_TEMP_MIN_EXTENDED
: JC42_TEMP_MIN) - 6000,
JC42_TEMP_MAX);
- diff = jc42_temp_from_reg(data->temp[t_crit]) - val;
+ diff = jc42_temp_from_reg(regval) - val;
hyst = 0;
if (diff > 0) {
if (diff < 2250)
@@ -491,6 +501,7 @@ static const struct regmap_config jc42_regmap_config = {
.writeable_reg = jc42_writable_reg,
.readable_reg = jc42_readable_reg,
.volatile_reg = jc42_volatile_reg,
+ .cache_type = REGCACHE_RBTREE,
};
static int jc42_probe(struct i2c_client *client)