From patchwork Wed Oct 19 15:29:40 2022 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Arnd Bergmann X-Patchwork-Id: 5722 Return-Path: Delivered-To: ouuuleilei@gmail.com Received: by 2002:a5d:4ac7:0:0:0:0:0 with SMTP id y7csp399468wrs; Wed, 19 Oct 2022 08:52:11 -0700 (PDT) X-Google-Smtp-Source: AMsMyM6+15ai2misvYFHXF3N0RVu1fP6qFAVQphZpH0R+WqDFAswfihbdVDZ3P0GjRBOZvolTRcH X-Received: by 2002:a17:90b:1f86:b0:205:d3d0:1931 with SMTP id so6-20020a17090b1f8600b00205d3d01931mr10640969pjb.211.1666194730636; Wed, 19 Oct 2022 08:52:10 -0700 (PDT) ARC-Seal: i=1; a=rsa-sha256; t=1666194730; cv=none; d=google.com; s=arc-20160816; b=w0RFfYNeifSYQiVwu9G2XM4VzefSD8gnExvy2k1bFQCj6gGsEeBOkZr4uLBTUl9bjR ZUOojmJQOq4b7XNKUfvYdmUFFEf13yMhFW/EznluhO4utrqgSpbkTzEt8+gtdBtxtLde hilia9dnHqGsR14P2iM5nS0q6doQ0bCt3xJvc2jNk+6tO94zXMubB+JpQQXAecuKxGkm QPq8U6rlrqukWUptAvzgcuj97g6jm8ZiOAuh/y2yeowygwCECmfYEJGEMq209DtSvxDS I5r6HlL7VhIoydeljf2aN2rYXbljUMEH869eKhYBu2bLBpRf+l6xFqgIQjflzrNPvOF4 c5Yw== ARC-Message-Signature: i=1; a=rsa-sha256; c=relaxed/relaxed; d=google.com; s=arc-20160816; h=list-id:precedence:content-transfer-encoding:mime-version :references:in-reply-to:message-id:date:subject:cc:to:from :dkim-signature; bh=UMi2Q6xC23OFppp1d4qmf/OFIaiqWX+vR9Vmcqc1/+c=; b=xDi4VlJcauN6aP6GVq8PzAn3x6n66olSj9KnlEhXTgkOZqHAdSV/GXRhUwRVTI88X1 rX/+qRIO7YBIoxdvTRFE4xpvJpszbM1X7hGQ/pjh7Em44o0ldu/KvURyMuexmGoGYwY+ P/P+jq5Yq6vP/lVDzhJd6Z4p2/g6Rb93gyC6+DwkWK3tUH3qGU47OZDtueUVY4Jnm6T3 FWjcoGi+nXSg+sia+wZ3cmJcIMdyf4neYqjdlAT2gNov4IjvyE33VT/YryDsReol1W3G UyYC/3HyknKT8RjgZdAk9ktxoRWxQ4MYwg1EYqfTKJNqWtLYFPmy1lxqJPQpCFrFLaqw bdqQ== ARC-Authentication-Results: i=1; mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=HzTis5MQ; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: from out1.vger.email (out1.vger.email. [2620:137:e000::1:20]) by mx.google.com with ESMTP id w63-20020a638242000000b0046af248062csi18095083pgd.665.2022.10.19.08.51.58; Wed, 19 Oct 2022 08:52:10 -0700 (PDT) Received-SPF: pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) client-ip=2620:137:e000::1:20; Authentication-Results: mx.google.com; dkim=pass header.i=@kernel.org header.s=k20201202 header.b=HzTis5MQ; spf=pass (google.com: domain of linux-kernel-owner@vger.kernel.org designates 2620:137:e000::1:20 as permitted sender) smtp.mailfrom=linux-kernel-owner@vger.kernel.org; dmarc=pass (p=NONE sp=NONE dis=NONE) header.from=kernel.org Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S232389AbiJSPra (ORCPT + 99 others); Wed, 19 Oct 2022 11:47:30 -0400 Received: from lindbergh.monkeyblade.net ([23.128.96.19]:39932 "EHLO lindbergh.monkeyblade.net" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S232564AbiJSPrN (ORCPT ); Wed, 19 Oct 2022 11:47:13 -0400 Received: from ams.source.kernel.org (ams.source.kernel.org [IPv6:2604:1380:4601:e00::1]) by lindbergh.monkeyblade.net (Postfix) with ESMTPS id 5C8FC1E0470; Wed, 19 Oct 2022 08:41:38 -0700 (PDT) Received: from smtp.kernel.org (relay.kernel.org [52.25.139.140]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by ams.source.kernel.org (Postfix) with ESMTPS id 32B3CB82187; Wed, 19 Oct 2022 15:41:23 +0000 (UTC) Received: by smtp.kernel.org (Postfix) with ESMTPSA id 2E03BC433D6; Wed, 19 Oct 2022 15:41:19 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1666194082; bh=gERiTvmEkmViJopJuSGIiFwvMAK+LyUh68iyKGIXVJc=; h=From:To:Cc:Subject:Date:In-Reply-To:References:From; b=HzTis5MQ+E00VQdc2kK8gHJN2Z3Ink/ov4mmO8GNjNhPUbhrjS841dUj42sf+j0g+ Y16a9BvJwEQOKKhxHr6EaKVxDZkRWdrg1fzIBKUuXRYupw24polb7IRS77SaTb+GZ4 6qGIAjXbyGSC/hK+EcZjM0yfSLaMMRP4mep7Nu7jSdonA3XiptrI0N8EW5Xavn6IjD M3jZAl6vdpe1Z32MRLv75CrxdP6FdoRAKkrXXsR6WQMInH3RN8x4rJ83dBI24GYY3X 9Kw6MDxG7XCV1JL70rCAeCEQ68WGYxo5EAqiqqK5K7Fksp1nOOMqbaaRPYaO/OnF/P nGwalEHGY/JQA== From: Arnd Bergmann To: Sekhar Nori , Bartosz Golaszewski , linux-arm-kernel@lists.infradead.org, Mauro Carvalho Chehab , "Lad, Prabhakar" Cc: linux-kernel@vger.kernel.org, Kevin Hilman , Arnd Bergmann , Hans Verkuil , linux-media@vger.kernel.org Subject: [PATCH 14/14] media: davinci: remove vpbe support Date: Wed, 19 Oct 2022 17:29:40 +0200 Message-Id: <20221019152947.3857217-15-arnd@kernel.org> X-Mailer: git-send-email 2.29.2 In-Reply-To: <20221019152947.3857217-1-arnd@kernel.org> References: <20221019152947.3857217-1-arnd@kernel.org> MIME-Version: 1.0 X-Spam-Status: No, score=-7.4 required=5.0 tests=BAYES_00,DKIMWL_WL_HIGH, DKIM_SIGNED,DKIM_VALID,DKIM_VALID_AU,DKIM_VALID_EF,RCVD_IN_DNSWL_HI, SPF_HELO_NONE,SPF_PASS autolearn=ham autolearn_force=no version=3.4.6 X-Spam-Checker-Version: SpamAssassin 3.4.6 (2021-04-09) on lindbergh.monkeyblade.net Precedence: bulk List-ID: X-Mailing-List: linux-kernel@vger.kernel.org X-getmail-retrieved-from-mailbox: =?utf-8?q?INBOX?= X-GMAIL-THRID: =?utf-8?q?1747131805768490745?= X-GMAIL-MSGID: =?utf-8?q?1747131805768490745?= From: Arnd Bergmann The davinci dm3xx/dm644x platforms are gone now, and the remaining da8xx platforms do not use the vpbe driver, so the driver can be removed as well. Signed-off-by: Arnd Bergmann Acked-by: Hans Verkuil Acked-by: Lad Prabhakar --- .../admin-guide/media/davinci-vpbe.rst | 65 - .../admin-guide/media/platform-cardlist.rst | 1 - .../admin-guide/media/v4l-drivers.rst | 1 - .../media/drivers/davinci-vpbe-devel.rst | 39 - .../driver-api/media/drivers/index.rst | 1 - drivers/media/platform/ti/davinci/Kconfig | 16 - drivers/media/platform/ti/davinci/Makefile | 3 - drivers/media/platform/ti/davinci/vpbe.c | 840 --------- .../media/platform/ti/davinci/vpbe_display.c | 1510 ---------------- drivers/media/platform/ti/davinci/vpbe_osd.c | 1582 ----------------- .../media/platform/ti/davinci/vpbe_osd_regs.h | 352 ---- drivers/media/platform/ti/davinci/vpbe_venc.c | 676 ------- .../platform/ti/davinci/vpbe_venc_regs.h | 165 -- drivers/media/platform/ti/davinci/vpss.c | 529 ------ include/media/davinci/vpbe.h | 184 -- include/media/davinci/vpbe_display.h | 122 -- include/media/davinci/vpbe_osd.h | 382 ---- include/media/davinci/vpbe_types.h | 74 - include/media/davinci/vpbe_venc.h | 37 - include/media/davinci/vpss.h | 111 -- 20 files changed, 6690 deletions(-) delete mode 100644 Documentation/admin-guide/media/davinci-vpbe.rst delete mode 100644 Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst delete mode 100644 drivers/media/platform/ti/davinci/vpbe.c delete mode 100644 drivers/media/platform/ti/davinci/vpbe_display.c delete mode 100644 drivers/media/platform/ti/davinci/vpbe_osd.c delete mode 100644 drivers/media/platform/ti/davinci/vpbe_osd_regs.h delete mode 100644 drivers/media/platform/ti/davinci/vpbe_venc.c delete mode 100644 drivers/media/platform/ti/davinci/vpbe_venc_regs.h delete mode 100644 drivers/media/platform/ti/davinci/vpss.c delete mode 100644 include/media/davinci/vpbe.h delete mode 100644 include/media/davinci/vpbe_display.h delete mode 100644 include/media/davinci/vpbe_osd.h delete mode 100644 include/media/davinci/vpbe_types.h delete mode 100644 include/media/davinci/vpbe_venc.h delete mode 100644 include/media/davinci/vpss.h diff --git a/Documentation/admin-guide/media/davinci-vpbe.rst b/Documentation/admin-guide/media/davinci-vpbe.rst deleted file mode 100644 index 9e6360fd02db..000000000000 --- a/Documentation/admin-guide/media/davinci-vpbe.rst +++ /dev/null @@ -1,65 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The VPBE V4L2 driver design -=========================== - -Functional partitioning ------------------------ - -Consists of the following: - - 1. V4L2 display driver - - Implements creation of video2 and video3 device nodes and - provides v4l2 device interface to manage VID0 and VID1 layers. - - 2. Display controller - - Loads up VENC, OSD and external encoders such as ths8200. It provides - a set of API calls to V4L2 drivers to set the output/standards - in the VENC or external sub devices. It also provides - a device object to access the services from OSD subdevice - using sub device ops. The connection of external encoders to VENC LCD - controller port is done at init time based on default output and standard - selection or at run time when application change the output through - V4L2 IOCTLs. - - When connected to an external encoder, vpbe controller is also responsible - for setting up the interface between VENC and external encoders based on - board specific settings (specified in board-xxx-evm.c). This allows - interfacing external encoders such as ths8200. The setup_if_config() - is implemented for this as well as configure_venc() (part of the next patch) - API to set timings in VENC for a specific display resolution. As of this - patch series, the interconnection and enabling and setting of the external - encoders is not present, and would be a part of the next patch series. - - 3. VENC subdevice module - - Responsible for setting outputs provided through internal DACs and also - setting timings at LCD controller port when external encoders are connected - at the port or LCD panel timings required. When external encoder/LCD panel - is connected, the timings for a specific standard/preset is retrieved from - the board specific table and the values are used to set the timings in - venc using non-standard timing mode. - - Support LCD Panel displays using the VENC. For example to support a Logic - PD display, it requires setting up the LCD controller port with a set of - timings for the resolution supported and setting the dot clock. So we could - add the available outputs as a board specific entry (i.e add the "LogicPD" - output name to board-xxx-evm.c). A table of timings for various LCDs - supported can be maintained in the board specific setup file to support - various LCD displays.As of this patch a basic driver is present, and this - support for external encoders and displays forms a part of the next - patch series. - - 4. OSD module - - OSD module implements all OSD layer management and hardware specific - features. The VPBE module interacts with the OSD for enabling and - disabling appropriate features of the OSD. - -Current status --------------- - -A fully functional working version of the V4L2 driver is available. This -driver has been tested with NTSC and PAL standards and buffer streaming. diff --git a/Documentation/admin-guide/media/platform-cardlist.rst b/Documentation/admin-guide/media/platform-cardlist.rst index ac73c4166d1e..8ef57cd13dec 100644 --- a/Documentation/admin-guide/media/platform-cardlist.rst +++ b/Documentation/admin-guide/media/platform-cardlist.rst @@ -73,7 +73,6 @@ via-camera VIAFB camera controller video-mux Video Multiplexer vpif_display TI DaVinci VPIF V4L2-Display vpif_capture TI DaVinci VPIF video capture -vpss TI DaVinci VPBE V4L2-Display vsp1 Renesas VSP1 Video Processing Engine xilinx-tpg Xilinx Video Test Pattern Generator xilinx-video Xilinx Video IP (EXPERIMENTAL) diff --git a/Documentation/admin-guide/media/v4l-drivers.rst b/Documentation/admin-guide/media/v4l-drivers.rst index 9c7ebe2ca3bd..13f8a39366c9 100644 --- a/Documentation/admin-guide/media/v4l-drivers.rst +++ b/Documentation/admin-guide/media/v4l-drivers.rst @@ -13,7 +13,6 @@ Video4Linux (V4L) driver-specific documentation cafe_ccic cpia2 cx88 - davinci-vpbe fimc imx imx7 diff --git a/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst b/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst deleted file mode 100644 index 4e87bdbc7ae4..000000000000 --- a/Documentation/driver-api/media/drivers/davinci-vpbe-devel.rst +++ /dev/null @@ -1,39 +0,0 @@ -.. SPDX-License-Identifier: GPL-2.0 - -The VPBE V4L2 driver design -=========================== - -File partitioning ------------------ - - V4L2 display device driver - drivers/media/platform/ti/davinci/vpbe_display.c - drivers/media/platform/ti/davinci/vpbe_display.h - - VPBE display controller - drivers/media/platform/ti/davinci/vpbe.c - drivers/media/platform/ti/davinci/vpbe.h - - VPBE venc sub device driver - drivers/media/platform/ti/davinci/vpbe_venc.c - drivers/media/platform/ti/davinci/vpbe_venc.h - drivers/media/platform/ti/davinci/vpbe_venc_regs.h - - VPBE osd driver - drivers/media/platform/ti/davinci/vpbe_osd.c - drivers/media/platform/ti/davinci/vpbe_osd.h - drivers/media/platform/ti/davinci/vpbe_osd_regs.h - -To be done ----------- - -vpbe display controller - - Add support for external encoders. - - add support for selecting external encoder as default at probe time. - -vpbe venc sub device - - add timings for supporting ths8200 - - add support for LogicPD LCD. - -FB drivers - - Add support for fbdev drivers.- Ready and part of subsequent patches. diff --git a/Documentation/driver-api/media/drivers/index.rst b/Documentation/driver-api/media/drivers/index.rst index 32406490557c..3c17d48f83c0 100644 --- a/Documentation/driver-api/media/drivers/index.rst +++ b/Documentation/driver-api/media/drivers/index.rst @@ -16,7 +16,6 @@ Video4Linux (V4L) drivers cpia2_devel cx2341x-devel cx88-devel - davinci-vpbe-devel fimc-devel pvrusb2 pxa_camera diff --git a/drivers/media/platform/ti/davinci/Kconfig b/drivers/media/platform/ti/davinci/Kconfig index 96d4bed7fe9e..542a602e66be 100644 --- a/drivers/media/platform/ti/davinci/Kconfig +++ b/drivers/media/platform/ti/davinci/Kconfig @@ -31,19 +31,3 @@ config VIDEO_DAVINCI_VPIF_CAPTURE To compile this driver as a module, choose M here. There will be two modules called vpif.ko and vpif_capture.ko - -config VIDEO_DAVINCI_VPBE_DISPLAY - tristate "TI DaVinci VPBE V4L2-Display driver" - depends on V4L_PLATFORM_DRIVERS - depends on VIDEO_DEV - depends on ARCH_DAVINCI || COMPILE_TEST - depends on I2C - select VIDEOBUF2_DMA_CONTIG - help - Enables Davinci VPBE module used for display devices. - This module is used for display on TI DM644x/DM365/DM355 - based display devices. - - To compile this driver as a module, choose M here. There will - be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko, - vpbe_venc.ko and vpbe_display.ko diff --git a/drivers/media/platform/ti/davinci/Makefile b/drivers/media/platform/ti/davinci/Makefile index b20a91653162..512f03369bae 100644 --- a/drivers/media/platform/ti/davinci/Makefile +++ b/drivers/media/platform/ti/davinci/Makefile @@ -7,6 +7,3 @@ obj-$(CONFIG_VIDEO_DAVINCI_VPIF_DISPLAY) += vpif.o vpif_display.o #VPIF Capture driver obj-$(CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE) += vpif.o vpif_capture.o - -obj-$(CONFIG_VIDEO_DAVINCI_VPBE_DISPLAY) += vpss.o vpbe.o vpbe_osd.o \ - vpbe_venc.o vpbe_display.o diff --git a/drivers/media/platform/ti/davinci/vpbe.c b/drivers/media/platform/ti/davinci/vpbe.c deleted file mode 100644 index 509ecc84624e..000000000000 --- a/drivers/media/platform/ti/davinci/vpbe.c +++ /dev/null @@ -1,840 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include -#include - -#define VPBE_DEFAULT_OUTPUT "Composite" -#define VPBE_DEFAULT_MODE "ntsc" - -static char *def_output = VPBE_DEFAULT_OUTPUT; -static char *def_mode = VPBE_DEFAULT_MODE; -static int debug; - -module_param(def_output, charp, S_IRUGO); -module_param(def_mode, charp, S_IRUGO); -module_param(debug, int, 0644); - -MODULE_PARM_DESC(def_output, "vpbe output name (default:Composite)"); -MODULE_PARM_DESC(def_mode, "vpbe output mode name (default:ntsc"); -MODULE_PARM_DESC(debug, "Debug level 0-1"); - -MODULE_DESCRIPTION("TI DMXXX VPBE Display controller"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Texas Instruments"); - -/** - * vpbe_current_encoder_info - Get config info for current encoder - * @vpbe_dev: vpbe device ptr - * - * Return ptr to current encoder config info - */ -static struct encoder_config_info* -vpbe_current_encoder_info(struct vpbe_device *vpbe_dev) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - int index = vpbe_dev->current_sd_index; - - return ((index == 0) ? &cfg->venc : - &cfg->ext_encoders[index-1]); -} - -/** - * vpbe_find_encoder_sd_index - Given a name find encoder sd index - * - * @cfg: ptr to vpbe cfg - * @index: index used by application - * - * Return sd index of the encoder - */ -static int vpbe_find_encoder_sd_index(struct vpbe_config *cfg, - int index) -{ - char *encoder_name = cfg->outputs[index].subdev_name; - int i; - - /* Venc is always first */ - if (!strcmp(encoder_name, cfg->venc.module_name)) - return 0; - - for (i = 0; i < cfg->num_ext_encoders; i++) { - if (!strcmp(encoder_name, - cfg->ext_encoders[i].module_name)) - return i+1; - } - - return -EINVAL; -} - -/** - * vpbe_enum_outputs - enumerate outputs - * @vpbe_dev: vpbe device ptr - * @output: ptr to v4l2_output structure - * - * Enumerates the outputs available at the vpbe display - * returns the status, -EINVAL if end of output list - */ -static int vpbe_enum_outputs(struct vpbe_device *vpbe_dev, - struct v4l2_output *output) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - unsigned int temp_index = output->index; - - if (temp_index >= cfg->num_outputs) - return -EINVAL; - - *output = cfg->outputs[temp_index].output; - output->index = temp_index; - - return 0; -} - -static int vpbe_get_mode_info(struct vpbe_device *vpbe_dev, char *mode, - int output_index) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - struct vpbe_enc_mode_info var; - int curr_output = output_index; - int i; - - if (!mode) - return -EINVAL; - - for (i = 0; i < cfg->outputs[curr_output].num_modes; i++) { - var = cfg->outputs[curr_output].modes[i]; - if (!strcmp(mode, var.name)) { - vpbe_dev->current_timings = var; - return 0; - } - } - - return -EINVAL; -} - -static int vpbe_get_current_mode_info(struct vpbe_device *vpbe_dev, - struct vpbe_enc_mode_info *mode_info) -{ - if (!mode_info) - return -EINVAL; - - *mode_info = vpbe_dev->current_timings; - - return 0; -} - -/* Get std by std id */ -static int vpbe_get_std_info(struct vpbe_device *vpbe_dev, - v4l2_std_id std_id) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - struct vpbe_enc_mode_info var; - int curr_output = vpbe_dev->current_out_index; - int i; - - for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { - var = cfg->outputs[curr_output].modes[i]; - if ((var.timings_type & VPBE_ENC_STD) && - (var.std_id & std_id)) { - vpbe_dev->current_timings = var; - return 0; - } - } - - return -EINVAL; -} - -static int vpbe_get_std_info_by_name(struct vpbe_device *vpbe_dev, - char *std_name) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - struct vpbe_enc_mode_info var; - int curr_output = vpbe_dev->current_out_index; - int i; - - for (i = 0; i < vpbe_dev->cfg->outputs[curr_output].num_modes; i++) { - var = cfg->outputs[curr_output].modes[i]; - if (!strcmp(var.name, std_name)) { - vpbe_dev->current_timings = var; - return 0; - } - } - - return -EINVAL; -} - -/** - * vpbe_set_output - Set output - * @vpbe_dev: vpbe device ptr - * @index: index of output - * - * Set vpbe output to the output specified by the index - */ -static int vpbe_set_output(struct vpbe_device *vpbe_dev, int index) -{ - struct encoder_config_info *curr_enc_info = - vpbe_current_encoder_info(vpbe_dev); - struct vpbe_config *cfg = vpbe_dev->cfg; - struct venc_platform_data *venc_device = vpbe_dev->venc_device; - int enc_out_index; - int sd_index; - int ret; - - if (index >= cfg->num_outputs) - return -EINVAL; - - mutex_lock(&vpbe_dev->lock); - - sd_index = vpbe_dev->current_sd_index; - enc_out_index = cfg->outputs[index].output.index; - /* - * Currently we switch the encoder based on output selected - * by the application. If media controller is implemented later - * there is will be an API added to setup_link between venc - * and external encoder. So in that case below comparison always - * match and encoder will not be switched. But if application - * chose not to use media controller, then this provides current - * way of switching encoder at the venc output. - */ - if (strcmp(curr_enc_info->module_name, - cfg->outputs[index].subdev_name)) { - /* Need to switch the encoder at the output */ - sd_index = vpbe_find_encoder_sd_index(cfg, index); - if (sd_index < 0) { - ret = -EINVAL; - goto unlock; - } - - ret = venc_device->setup_if_config(cfg->outputs[index].if_params); - if (ret) - goto unlock; - } - - /* Set output at the encoder */ - ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, - s_routing, 0, enc_out_index, 0); - if (ret) - goto unlock; - - /* - * It is assumed that venc or external encoder will set a default - * mode in the sub device. For external encoder or LCD pannel output, - * we also need to set up the lcd port for the required mode. So setup - * the lcd port for the default mode that is configured in the board - * arch/arm/mach-davinci/board-dm355-evm.setup file for the external - * encoder. - */ - ret = vpbe_get_mode_info(vpbe_dev, - cfg->outputs[index].default_mode, index); - if (!ret) { - struct osd_state *osd_device = vpbe_dev->osd_device; - - osd_device->ops.set_left_margin(osd_device, - vpbe_dev->current_timings.left_margin); - osd_device->ops.set_top_margin(osd_device, - vpbe_dev->current_timings.upper_margin); - vpbe_dev->current_sd_index = sd_index; - vpbe_dev->current_out_index = index; - } -unlock: - mutex_unlock(&vpbe_dev->lock); - return ret; -} - -static int vpbe_set_default_output(struct vpbe_device *vpbe_dev) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - int i; - - for (i = 0; i < cfg->num_outputs; i++) { - if (!strcmp(def_output, - cfg->outputs[i].output.name)) { - int ret = vpbe_set_output(vpbe_dev, i); - - if (!ret) - vpbe_dev->current_out_index = i; - return ret; - } - } - return 0; -} - -/** - * vpbe_get_output - Get output - * @vpbe_dev: vpbe device ptr - * - * return current vpbe output to the index - */ -static unsigned int vpbe_get_output(struct vpbe_device *vpbe_dev) -{ - return vpbe_dev->current_out_index; -} - -/* - * vpbe_s_dv_timings - Set the given preset timings in the encoder - * - * Sets the timings if supported by the current encoder. Return the status. - * 0 - success & -EINVAL on error - */ -static int vpbe_s_dv_timings(struct vpbe_device *vpbe_dev, - struct v4l2_dv_timings *dv_timings) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - int out_index = vpbe_dev->current_out_index; - struct vpbe_output *output = &cfg->outputs[out_index]; - int sd_index = vpbe_dev->current_sd_index; - int ret, i; - - - if (!(cfg->outputs[out_index].output.capabilities & - V4L2_OUT_CAP_DV_TIMINGS)) - return -ENODATA; - - for (i = 0; i < output->num_modes; i++) { - if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS && - !memcmp(&output->modes[i].dv_timings, - dv_timings, sizeof(*dv_timings))) - break; - } - if (i >= output->num_modes) - return -EINVAL; - vpbe_dev->current_timings = output->modes[i]; - mutex_lock(&vpbe_dev->lock); - - ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, - s_dv_timings, dv_timings); - if (!ret && vpbe_dev->amp) { - /* Call amplifier subdevice */ - ret = v4l2_subdev_call(vpbe_dev->amp, video, - s_dv_timings, dv_timings); - } - /* set the lcd controller output for the given mode */ - if (!ret) { - struct osd_state *osd_device = vpbe_dev->osd_device; - - osd_device->ops.set_left_margin(osd_device, - vpbe_dev->current_timings.left_margin); - osd_device->ops.set_top_margin(osd_device, - vpbe_dev->current_timings.upper_margin); - } - mutex_unlock(&vpbe_dev->lock); - - return ret; -} - -/* - * vpbe_g_dv_timings - Get the timings in the current encoder - * - * Get the timings in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int vpbe_g_dv_timings(struct vpbe_device *vpbe_dev, - struct v4l2_dv_timings *dv_timings) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - int out_index = vpbe_dev->current_out_index; - - if (!(cfg->outputs[out_index].output.capabilities & - V4L2_OUT_CAP_DV_TIMINGS)) - return -ENODATA; - - if (vpbe_dev->current_timings.timings_type & - VPBE_ENC_DV_TIMINGS) { - *dv_timings = vpbe_dev->current_timings.dv_timings; - return 0; - } - - return -EINVAL; -} - -/* - * vpbe_enum_dv_timings - Enumerate the dv timings in the current encoder - * - * Get the timings in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int vpbe_enum_dv_timings(struct vpbe_device *vpbe_dev, - struct v4l2_enum_dv_timings *timings) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - int out_index = vpbe_dev->current_out_index; - struct vpbe_output *output = &cfg->outputs[out_index]; - int j = 0; - int i; - - if (!(output->output.capabilities & V4L2_OUT_CAP_DV_TIMINGS)) - return -ENODATA; - - for (i = 0; i < output->num_modes; i++) { - if (output->modes[i].timings_type == VPBE_ENC_DV_TIMINGS) { - if (j == timings->index) - break; - j++; - } - } - - if (i == output->num_modes) - return -EINVAL; - timings->timings = output->modes[i].dv_timings; - return 0; -} - -/* - * vpbe_s_std - Set the given standard in the encoder - * - * Sets the standard if supported by the current encoder. Return the status. - * 0 - success & -EINVAL on error - */ -static int vpbe_s_std(struct vpbe_device *vpbe_dev, v4l2_std_id std_id) -{ - struct vpbe_config *cfg = vpbe_dev->cfg; - int out_index = vpbe_dev->current_out_index; - int sd_index = vpbe_dev->current_sd_index; - int ret; - - if (!(cfg->outputs[out_index].output.capabilities & - V4L2_OUT_CAP_STD)) - return -ENODATA; - - ret = vpbe_get_std_info(vpbe_dev, std_id); - if (ret) - return ret; - - mutex_lock(&vpbe_dev->lock); - - ret = v4l2_subdev_call(vpbe_dev->encoders[sd_index], video, - s_std_output, std_id); - /* set the lcd controller output for the given mode */ - if (!ret) { - struct osd_state *osd_device = vpbe_dev->osd_device; - - osd_device->ops.set_left_margin(osd_device, - vpbe_dev->current_timings.left_margin); - osd_device->ops.set_top_margin(osd_device, - vpbe_dev->current_timings.upper_margin); - } - mutex_unlock(&vpbe_dev->lock); - - return ret; -} - -/* - * vpbe_g_std - Get the standard in the current encoder - * - * Get the standard in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int vpbe_g_std(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id) -{ - struct vpbe_enc_mode_info *cur_timings = &vpbe_dev->current_timings; - struct vpbe_config *cfg = vpbe_dev->cfg; - int out_index = vpbe_dev->current_out_index; - - if (!(cfg->outputs[out_index].output.capabilities & V4L2_OUT_CAP_STD)) - return -ENODATA; - - if (cur_timings->timings_type & VPBE_ENC_STD) { - *std_id = cur_timings->std_id; - return 0; - } - - return -EINVAL; -} - -/* - * vpbe_set_mode - Set mode in the current encoder using mode info - * - * Use the mode string to decide what timings to set in the encoder - * This is typically useful when fbset command is used to change the current - * timings by specifying a string to indicate the timings. - */ -static int vpbe_set_mode(struct vpbe_device *vpbe_dev, - struct vpbe_enc_mode_info *mode_info) -{ - struct vpbe_enc_mode_info *preset_mode = NULL; - struct vpbe_config *cfg = vpbe_dev->cfg; - struct v4l2_dv_timings dv_timings; - struct osd_state *osd_device; - int out_index = vpbe_dev->current_out_index; - int i; - - if (!mode_info || !mode_info->name) - return -EINVAL; - - for (i = 0; i < cfg->outputs[out_index].num_modes; i++) { - if (!strcmp(mode_info->name, - cfg->outputs[out_index].modes[i].name)) { - preset_mode = &cfg->outputs[out_index].modes[i]; - /* - * it may be one of the 3 timings type. Check and - * invoke right API - */ - if (preset_mode->timings_type & VPBE_ENC_STD) - return vpbe_s_std(vpbe_dev, - preset_mode->std_id); - if (preset_mode->timings_type & - VPBE_ENC_DV_TIMINGS) { - dv_timings = - preset_mode->dv_timings; - return vpbe_s_dv_timings(vpbe_dev, &dv_timings); - } - } - } - - /* Only custom timing should reach here */ - if (!preset_mode) - return -EINVAL; - - mutex_lock(&vpbe_dev->lock); - - osd_device = vpbe_dev->osd_device; - vpbe_dev->current_timings = *preset_mode; - osd_device->ops.set_left_margin(osd_device, - vpbe_dev->current_timings.left_margin); - osd_device->ops.set_top_margin(osd_device, - vpbe_dev->current_timings.upper_margin); - - mutex_unlock(&vpbe_dev->lock); - return 0; -} - -static int vpbe_set_default_mode(struct vpbe_device *vpbe_dev) -{ - int ret; - - ret = vpbe_get_std_info_by_name(vpbe_dev, def_mode); - if (ret) - return ret; - - /* set the default mode in the encoder */ - return vpbe_set_mode(vpbe_dev, &vpbe_dev->current_timings); -} - -static int platform_device_get(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct vpbe_device *vpbe_dev = data; - - if (strstr(pdev->name, "vpbe-osd")) - vpbe_dev->osd_device = platform_get_drvdata(pdev); - if (strstr(pdev->name, "vpbe-venc")) - vpbe_dev->venc_device = dev_get_platdata(&pdev->dev); - - return 0; -} - -/** - * vpbe_initialize() - Initialize the vpbe display controller - * @dev: Master and slave device ptr - * @vpbe_dev: vpbe device ptr - * - * Master frame buffer device drivers calls this to initialize vpbe - * display controller. This will then registers v4l2 device and the sub - * devices and sets a current encoder sub device for display. v4l2 display - * device driver is the master and frame buffer display device driver is - * the slave. Frame buffer display driver checks the initialized during - * probe and exit if not initialized. Returns status. - */ -static int vpbe_initialize(struct device *dev, struct vpbe_device *vpbe_dev) -{ - struct encoder_config_info *enc_info; - struct amp_config_info *amp_info; - struct v4l2_subdev **enc_subdev; - struct osd_state *osd_device; - struct i2c_adapter *i2c_adap; - int num_encoders; - int ret = 0; - int err; - int i; - - /* - * v4l2 abd FBDev frame buffer devices will get the vpbe_dev pointer - * from the platform device by iteration of platform drivers and - * matching with device name - */ - if (!vpbe_dev || !dev) { - printk(KERN_ERR "Null device pointers.\n"); - return -ENODEV; - } - - if (vpbe_dev->initialized) - return 0; - - mutex_lock(&vpbe_dev->lock); - - if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { - /* We have dac clock available for platform */ - vpbe_dev->dac_clk = clk_get(vpbe_dev->pdev, "vpss_dac"); - if (IS_ERR(vpbe_dev->dac_clk)) { - ret = PTR_ERR(vpbe_dev->dac_clk); - goto fail_mutex_unlock; - } - if (clk_prepare_enable(vpbe_dev->dac_clk)) { - ret = -ENODEV; - clk_put(vpbe_dev->dac_clk); - goto fail_mutex_unlock; - } - } - - /* first enable vpss clocks */ - vpss_enable_clock(VPSS_VPBE_CLOCK, 1); - - /* First register a v4l2 device */ - ret = v4l2_device_register(dev, &vpbe_dev->v4l2_dev); - if (ret) { - v4l2_err(dev->driver, - "Unable to register v4l2 device.\n"); - goto fail_clk_put; - } - v4l2_info(&vpbe_dev->v4l2_dev, "vpbe v4l2 device registered\n"); - - err = bus_for_each_dev(&platform_bus_type, NULL, vpbe_dev, - platform_device_get); - if (err < 0) { - ret = err; - goto fail_dev_unregister; - } - - vpbe_dev->venc = venc_sub_dev_init(&vpbe_dev->v4l2_dev, - vpbe_dev->cfg->venc.module_name); - /* register venc sub device */ - if (!vpbe_dev->venc) { - v4l2_err(&vpbe_dev->v4l2_dev, - "vpbe unable to init venc sub device\n"); - ret = -ENODEV; - goto fail_dev_unregister; - } - /* initialize osd device */ - osd_device = vpbe_dev->osd_device; - if (osd_device->ops.initialize) { - err = osd_device->ops.initialize(osd_device); - if (err) { - v4l2_err(&vpbe_dev->v4l2_dev, - "unable to initialize the OSD device"); - ret = -ENOMEM; - goto fail_dev_unregister; - } - } - - /* - * Register any external encoders that are configured. At index 0 we - * store venc sd index. - */ - num_encoders = vpbe_dev->cfg->num_ext_encoders + 1; - vpbe_dev->encoders = kmalloc_array(num_encoders, - sizeof(*vpbe_dev->encoders), - GFP_KERNEL); - if (!vpbe_dev->encoders) { - ret = -ENOMEM; - goto fail_dev_unregister; - } - - i2c_adap = i2c_get_adapter(vpbe_dev->cfg->i2c_adapter_id); - for (i = 0; i < (vpbe_dev->cfg->num_ext_encoders + 1); i++) { - if (i == 0) { - /* venc is at index 0 */ - enc_subdev = &vpbe_dev->encoders[i]; - *enc_subdev = vpbe_dev->venc; - continue; - } - enc_info = &vpbe_dev->cfg->ext_encoders[i]; - if (enc_info->is_i2c) { - enc_subdev = &vpbe_dev->encoders[i]; - *enc_subdev = v4l2_i2c_new_subdev_board( - &vpbe_dev->v4l2_dev, i2c_adap, - &enc_info->board_info, NULL); - if (*enc_subdev) - v4l2_info(&vpbe_dev->v4l2_dev, - "v4l2 sub device %s registered\n", - enc_info->module_name); - else { - v4l2_err(&vpbe_dev->v4l2_dev, "encoder %s failed to register", - enc_info->module_name); - ret = -ENODEV; - goto fail_kfree_encoders; - } - } else - v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c encoders currently not supported"); - } - /* Add amplifier subdevice for dm365 */ - if ((strcmp(vpbe_dev->cfg->module_name, "dm365-vpbe-display") == 0) && - vpbe_dev->cfg->amp) { - amp_info = vpbe_dev->cfg->amp; - if (amp_info->is_i2c) { - vpbe_dev->amp = v4l2_i2c_new_subdev_board( - &vpbe_dev->v4l2_dev, i2c_adap, - &_info->board_info, NULL); - if (!vpbe_dev->amp) { - v4l2_err(&vpbe_dev->v4l2_dev, - "amplifier %s failed to register", - amp_info->module_name); - ret = -ENODEV; - goto fail_kfree_encoders; - } - v4l2_info(&vpbe_dev->v4l2_dev, - "v4l2 sub device %s registered\n", - amp_info->module_name); - } else { - vpbe_dev->amp = NULL; - v4l2_warn(&vpbe_dev->v4l2_dev, "non-i2c amplifiers currently not supported"); - } - } else { - vpbe_dev->amp = NULL; - } - - /* set the current encoder and output to that of venc by default */ - vpbe_dev->current_sd_index = 0; - vpbe_dev->current_out_index = 0; - - mutex_unlock(&vpbe_dev->lock); - - printk(KERN_NOTICE "Setting default output to %s\n", def_output); - ret = vpbe_set_default_output(vpbe_dev); - if (ret) { - v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default output %s", - def_output); - goto fail_kfree_amp; - } - - printk(KERN_NOTICE "Setting default mode to %s\n", def_mode); - ret = vpbe_set_default_mode(vpbe_dev); - if (ret) { - v4l2_err(&vpbe_dev->v4l2_dev, "Failed to set default mode %s", - def_mode); - goto fail_kfree_amp; - } - vpbe_dev->initialized = 1; - /* TBD handling of bootargs for default output and mode */ - return 0; - -fail_kfree_amp: - mutex_lock(&vpbe_dev->lock); - kfree(vpbe_dev->amp); -fail_kfree_encoders: - kfree(vpbe_dev->encoders); -fail_dev_unregister: - v4l2_device_unregister(&vpbe_dev->v4l2_dev); -fail_clk_put: - if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { - clk_disable_unprepare(vpbe_dev->dac_clk); - clk_put(vpbe_dev->dac_clk); - } -fail_mutex_unlock: - mutex_unlock(&vpbe_dev->lock); - return ret; -} - -/** - * vpbe_deinitialize() - de-initialize the vpbe display controller - * @dev: Master and slave device ptr - * @vpbe_dev: vpbe device ptr - * - * vpbe_master and slave frame buffer devices calls this to de-initialize - * the display controller. It is called when master and slave device - * driver modules are removed and no longer requires the display controller. - */ -static void vpbe_deinitialize(struct device *dev, struct vpbe_device *vpbe_dev) -{ - v4l2_device_unregister(&vpbe_dev->v4l2_dev); - if (strcmp(vpbe_dev->cfg->module_name, "dm644x-vpbe-display") != 0) { - clk_disable_unprepare(vpbe_dev->dac_clk); - clk_put(vpbe_dev->dac_clk); - } - - kfree(vpbe_dev->amp); - kfree(vpbe_dev->encoders); - vpbe_dev->initialized = 0; - /* disable vpss clocks */ - vpss_enable_clock(VPSS_VPBE_CLOCK, 0); -} - -static const struct vpbe_device_ops vpbe_dev_ops = { - .enum_outputs = vpbe_enum_outputs, - .set_output = vpbe_set_output, - .get_output = vpbe_get_output, - .s_dv_timings = vpbe_s_dv_timings, - .g_dv_timings = vpbe_g_dv_timings, - .enum_dv_timings = vpbe_enum_dv_timings, - .s_std = vpbe_s_std, - .g_std = vpbe_g_std, - .initialize = vpbe_initialize, - .deinitialize = vpbe_deinitialize, - .get_mode_info = vpbe_get_current_mode_info, - .set_mode = vpbe_set_mode, -}; - -static int vpbe_probe(struct platform_device *pdev) -{ - struct vpbe_device *vpbe_dev; - struct vpbe_config *cfg; - - if (!pdev->dev.platform_data) { - v4l2_err(pdev->dev.driver, "No platform data\n"); - return -ENODEV; - } - cfg = pdev->dev.platform_data; - - if (!cfg->module_name[0] || - !cfg->osd.module_name[0] || - !cfg->venc.module_name[0]) { - v4l2_err(pdev->dev.driver, "vpbe display module names not defined\n"); - return -EINVAL; - } - - vpbe_dev = kzalloc(sizeof(*vpbe_dev), GFP_KERNEL); - if (!vpbe_dev) - return -ENOMEM; - - vpbe_dev->cfg = cfg; - vpbe_dev->ops = vpbe_dev_ops; - vpbe_dev->pdev = &pdev->dev; - - if (cfg->outputs->num_modes > 0) - vpbe_dev->current_timings = vpbe_dev->cfg->outputs[0].modes[0]; - else { - kfree(vpbe_dev); - return -ENODEV; - } - - /* set the driver data in platform device */ - platform_set_drvdata(pdev, vpbe_dev); - mutex_init(&vpbe_dev->lock); - - return 0; -} - -static int vpbe_remove(struct platform_device *device) -{ - struct vpbe_device *vpbe_dev = platform_get_drvdata(device); - - kfree(vpbe_dev); - - return 0; -} - -static struct platform_driver vpbe_driver = { - .driver = { - .name = "vpbe_controller", - }, - .probe = vpbe_probe, - .remove = vpbe_remove, -}; - -module_platform_driver(vpbe_driver); diff --git a/drivers/media/platform/ti/davinci/vpbe_display.c b/drivers/media/platform/ti/davinci/vpbe_display.c deleted file mode 100644 index 9ea70817538e..000000000000 --- a/drivers/media/platform/ti/davinci/vpbe_display.c +++ /dev/null @@ -1,1510 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include "vpbe_venc_regs.h" - -#define VPBE_DISPLAY_DRIVER "vpbe-v4l2" - -static int debug; - -#define VPBE_DEFAULT_NUM_BUFS 3 - -module_param(debug, int, 0644); - -static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, - struct vpbe_layer *layer); - -static int venc_is_second_field(struct vpbe_display *disp_dev) -{ - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - int ret, val; - - ret = v4l2_subdev_call(vpbe_dev->venc, - core, - command, - VENC_GET_FLD, - &val); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Error in getting Field ID 0\n"); - return 1; - } - return val; -} - -static void vpbe_isr_even_field(struct vpbe_display *disp_obj, - struct vpbe_layer *layer) -{ - if (layer->cur_frm == layer->next_frm) - return; - - layer->cur_frm->vb.vb2_buf.timestamp = ktime_get_ns(); - vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, VB2_BUF_STATE_DONE); - /* Make cur_frm pointing to next_frm */ - layer->cur_frm = layer->next_frm; -} - -static void vpbe_isr_odd_field(struct vpbe_display *disp_obj, - struct vpbe_layer *layer) -{ - struct osd_state *osd_device = disp_obj->osd_device; - unsigned long addr; - - spin_lock(&disp_obj->dma_queue_lock); - if (list_empty(&layer->dma_queue) || - (layer->cur_frm != layer->next_frm)) { - spin_unlock(&disp_obj->dma_queue_lock); - return; - } - /* - * one field is displayed configure - * the next frame if it is available - * otherwise hold on current frame - * Get next from the buffer queue - */ - layer->next_frm = list_entry(layer->dma_queue.next, - struct vpbe_disp_buffer, list); - /* Remove that from the buffer queue */ - list_del(&layer->next_frm->list); - spin_unlock(&disp_obj->dma_queue_lock); - /* Mark state of the frame to active */ - layer->next_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; - addr = vb2_dma_contig_plane_dma_addr(&layer->next_frm->vb.vb2_buf, 0); - osd_device->ops.start_layer(osd_device, - layer->layer_info.id, - addr, - disp_obj->cbcr_ofst); -} - -/* interrupt service routine */ -static irqreturn_t venc_isr(int irq, void *arg) -{ - struct vpbe_display *disp_dev = (struct vpbe_display *)arg; - struct vpbe_layer *layer; - static unsigned last_event; - unsigned event = 0; - int fid; - int i; - - if (!arg || !disp_dev->dev[0]) - return IRQ_HANDLED; - - if (venc_is_second_field(disp_dev)) - event |= VENC_SECOND_FIELD; - else - event |= VENC_FIRST_FIELD; - - if (event == (last_event & ~VENC_END_OF_FRAME)) { - /* - * If the display is non-interlaced, then we need to flag the - * end-of-frame event at every interrupt regardless of the - * value of the FIDST bit. We can conclude that the display is - * non-interlaced if the value of the FIDST bit is unchanged - * from the previous interrupt. - */ - event |= VENC_END_OF_FRAME; - } else if (event == VENC_SECOND_FIELD) { - /* end-of-frame for interlaced display */ - event |= VENC_END_OF_FRAME; - } - last_event = event; - - for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { - layer = disp_dev->dev[i]; - - if (!vb2_start_streaming_called(&layer->buffer_queue)) - continue; - - if (layer->layer_first_int) { - layer->layer_first_int = 0; - continue; - } - /* Check the field format */ - if ((V4L2_FIELD_NONE == layer->pix_fmt.field) && - (event & VENC_END_OF_FRAME)) { - /* Progressive mode */ - - vpbe_isr_even_field(disp_dev, layer); - vpbe_isr_odd_field(disp_dev, layer); - } else { - /* Interlaced mode */ - - layer->field_id ^= 1; - if (event & VENC_FIRST_FIELD) - fid = 0; - else - fid = 1; - - /* - * If field id does not match with store - * field id - */ - if (fid != layer->field_id) { - /* Make them in sync */ - layer->field_id = fid; - continue; - } - /* - * device field id and local field id are - * in sync. If this is even field - */ - if (0 == fid) - vpbe_isr_even_field(disp_dev, layer); - else /* odd field */ - vpbe_isr_odd_field(disp_dev, layer); - } - } - - return IRQ_HANDLED; -} - -/* - * vpbe_buffer_prepare() - * This is the callback function called from vb2_qbuf() function - * the buffer is prepared and user space virtual address is converted into - * physical address - */ -static int vpbe_buffer_prepare(struct vb2_buffer *vb) -{ - struct vb2_queue *q = vb->vb2_queue; - struct vpbe_layer *layer = vb2_get_drv_priv(q); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - unsigned long addr; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "vpbe_buffer_prepare\n"); - - vb2_set_plane_payload(vb, 0, layer->pix_fmt.sizeimage); - if (vb2_get_plane_payload(vb, 0) > vb2_plane_size(vb, 0)) - return -EINVAL; - - addr = vb2_dma_contig_plane_dma_addr(vb, 0); - if (!IS_ALIGNED(addr, 8)) { - v4l2_err(&vpbe_dev->v4l2_dev, - "buffer_prepare:offset is not aligned to 32 bytes\n"); - return -EINVAL; - } - return 0; -} - -/* - * vpbe_buffer_setup() - * This function allocates memory for the buffers - */ -static int -vpbe_buffer_queue_setup(struct vb2_queue *vq, - unsigned int *nbuffers, unsigned int *nplanes, - unsigned int sizes[], struct device *alloc_devs[]) - -{ - /* Get the file handle object and layer object */ - struct vpbe_layer *layer = vb2_get_drv_priv(vq); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_buffer_setup\n"); - - /* Store number of buffers allocated in numbuffer member */ - if (vq->num_buffers + *nbuffers < VPBE_DEFAULT_NUM_BUFS) - *nbuffers = VPBE_DEFAULT_NUM_BUFS - vq->num_buffers; - - if (*nplanes) - return sizes[0] < layer->pix_fmt.sizeimage ? -EINVAL : 0; - - *nplanes = 1; - sizes[0] = layer->pix_fmt.sizeimage; - - return 0; -} - -/* - * vpbe_buffer_queue() - * This function adds the buffer to DMA queue - */ -static void vpbe_buffer_queue(struct vb2_buffer *vb) -{ - struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb); - /* Get the file handle object and layer object */ - struct vpbe_disp_buffer *buf = container_of(vbuf, - struct vpbe_disp_buffer, vb); - struct vpbe_layer *layer = vb2_get_drv_priv(vb->vb2_queue); - struct vpbe_display *disp = layer->disp_dev; - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - unsigned long flags; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "vpbe_buffer_queue\n"); - - /* add the buffer to the DMA queue */ - spin_lock_irqsave(&disp->dma_queue_lock, flags); - list_add_tail(&buf->list, &layer->dma_queue); - spin_unlock_irqrestore(&disp->dma_queue_lock, flags); -} - -static int vpbe_start_streaming(struct vb2_queue *vq, unsigned int count) -{ - struct vpbe_layer *layer = vb2_get_drv_priv(vq); - struct osd_state *osd_device = layer->disp_dev->osd_device; - int ret; - - osd_device->ops.disable_layer(osd_device, layer->layer_info.id); - - /* Get the next frame from the buffer queue */ - layer->next_frm = layer->cur_frm = list_entry(layer->dma_queue.next, - struct vpbe_disp_buffer, list); - /* Remove buffer from the buffer queue */ - list_del(&layer->cur_frm->list); - /* Mark state of the current frame to active */ - layer->cur_frm->vb.vb2_buf.state = VB2_BUF_STATE_ACTIVE; - /* Initialize field_id and started member */ - layer->field_id = 0; - - /* Set parameters in OSD and VENC */ - ret = vpbe_set_osd_display_params(layer->disp_dev, layer); - if (ret < 0) { - struct vpbe_disp_buffer *buf, *tmp; - - vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, - VB2_BUF_STATE_QUEUED); - list_for_each_entry_safe(buf, tmp, &layer->dma_queue, list) { - list_del(&buf->list); - vb2_buffer_done(&buf->vb.vb2_buf, - VB2_BUF_STATE_QUEUED); - } - - return ret; - } - - /* - * if request format is yuv420 semiplanar, need to - * enable both video windows - */ - layer->layer_first_int = 1; - - return ret; -} - -static void vpbe_stop_streaming(struct vb2_queue *vq) -{ - struct vpbe_layer *layer = vb2_get_drv_priv(vq); - struct osd_state *osd_device = layer->disp_dev->osd_device; - struct vpbe_display *disp = layer->disp_dev; - unsigned long flags; - - if (!vb2_is_streaming(vq)) - return; - - osd_device->ops.disable_layer(osd_device, layer->layer_info.id); - - /* release all active buffers */ - spin_lock_irqsave(&disp->dma_queue_lock, flags); - if (layer->cur_frm == layer->next_frm) { - vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, - VB2_BUF_STATE_ERROR); - } else { - if (layer->cur_frm) - vb2_buffer_done(&layer->cur_frm->vb.vb2_buf, - VB2_BUF_STATE_ERROR); - if (layer->next_frm) - vb2_buffer_done(&layer->next_frm->vb.vb2_buf, - VB2_BUF_STATE_ERROR); - } - - while (!list_empty(&layer->dma_queue)) { - layer->next_frm = list_entry(layer->dma_queue.next, - struct vpbe_disp_buffer, list); - list_del(&layer->next_frm->list); - vb2_buffer_done(&layer->next_frm->vb.vb2_buf, - VB2_BUF_STATE_ERROR); - } - spin_unlock_irqrestore(&disp->dma_queue_lock, flags); -} - -static const struct vb2_ops video_qops = { - .queue_setup = vpbe_buffer_queue_setup, - .wait_prepare = vb2_ops_wait_prepare, - .wait_finish = vb2_ops_wait_finish, - .buf_prepare = vpbe_buffer_prepare, - .start_streaming = vpbe_start_streaming, - .stop_streaming = vpbe_stop_streaming, - .buf_queue = vpbe_buffer_queue, -}; - -static -struct vpbe_layer* -_vpbe_display_get_other_win_layer(struct vpbe_display *disp_dev, - struct vpbe_layer *layer) -{ - enum vpbe_display_device_id thiswin, otherwin; - thiswin = layer->device_id; - - otherwin = (thiswin == VPBE_DISPLAY_DEVICE_0) ? - VPBE_DISPLAY_DEVICE_1 : VPBE_DISPLAY_DEVICE_0; - return disp_dev->dev[otherwin]; -} - -static int vpbe_set_osd_display_params(struct vpbe_display *disp_dev, - struct vpbe_layer *layer) -{ - struct osd_layer_config *cfg = &layer->layer_info.config; - struct osd_state *osd_device = disp_dev->osd_device; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - unsigned long addr; - int ret; - - addr = vb2_dma_contig_plane_dma_addr(&layer->cur_frm->vb.vb2_buf, 0); - /* Set address in the display registers */ - osd_device->ops.start_layer(osd_device, - layer->layer_info.id, - addr, - disp_dev->cbcr_ofst); - - ret = osd_device->ops.enable_layer(osd_device, - layer->layer_info.id, 0); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Error in enabling osd window layer 0\n"); - return -1; - } - - /* Enable the window */ - layer->layer_info.enable = 1; - if (cfg->pixfmt == PIXFMT_NV12) { - struct vpbe_layer *otherlayer = - _vpbe_display_get_other_win_layer(disp_dev, layer); - - ret = osd_device->ops.enable_layer(osd_device, - otherlayer->layer_info.id, 1); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Error in enabling osd window layer 1\n"); - return -1; - } - otherlayer->layer_info.enable = 1; - } - return 0; -} - -static void -vpbe_disp_calculate_scale_factor(struct vpbe_display *disp_dev, - struct vpbe_layer *layer, - int expected_xsize, int expected_ysize) -{ - struct display_layer_info *layer_info = &layer->layer_info; - struct v4l2_pix_format *pixfmt = &layer->pix_fmt; - struct osd_layer_config *cfg = &layer->layer_info.config; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - int calculated_xsize; - int h_exp = 0; - int v_exp = 0; - int h_scale; - int v_scale; - - v4l2_std_id standard_id = vpbe_dev->current_timings.std_id; - - /* - * Application initially set the image format. Current display - * size is obtained from the vpbe display controller. expected_xsize - * and expected_ysize are set through S_SELECTION ioctl. Based on this, - * driver will calculate the scale factors for vertical and - * horizontal direction so that the image is displayed scaled - * and expanded. Application uses expansion to display the image - * in a square pixel. Otherwise it is displayed using displays - * pixel aspect ratio.It is expected that application chooses - * the crop coordinates for cropped or scaled display. if crop - * size is less than the image size, it is displayed cropped or - * it is displayed scaled and/or expanded. - * - * to begin with, set the crop window same as expected. Later we - * will override with scaled window size - */ - - cfg->xsize = pixfmt->width; - cfg->ysize = pixfmt->height; - layer_info->h_zoom = ZOOM_X1; /* no horizontal zoom */ - layer_info->v_zoom = ZOOM_X1; /* no horizontal zoom */ - layer_info->h_exp = H_EXP_OFF; /* no horizontal zoom */ - layer_info->v_exp = V_EXP_OFF; /* no horizontal zoom */ - - if (pixfmt->width < expected_xsize) { - h_scale = vpbe_dev->current_timings.xres / pixfmt->width; - if (h_scale < 2) - h_scale = 1; - else if (h_scale >= 4) - h_scale = 4; - else - h_scale = 2; - cfg->xsize *= h_scale; - if (cfg->xsize < expected_xsize) { - if ((standard_id & V4L2_STD_525_60) || - (standard_id & V4L2_STD_625_50)) { - calculated_xsize = (cfg->xsize * - VPBE_DISPLAY_H_EXP_RATIO_N) / - VPBE_DISPLAY_H_EXP_RATIO_D; - if (calculated_xsize <= expected_xsize) { - h_exp = 1; - cfg->xsize = calculated_xsize; - } - } - } - if (h_scale == 2) - layer_info->h_zoom = ZOOM_X2; - else if (h_scale == 4) - layer_info->h_zoom = ZOOM_X4; - if (h_exp) - layer_info->h_exp = H_EXP_9_OVER_8; - } else { - /* no scaling, only cropping. Set display area to crop area */ - cfg->xsize = expected_xsize; - } - - if (pixfmt->height < expected_ysize) { - v_scale = expected_ysize / pixfmt->height; - if (v_scale < 2) - v_scale = 1; - else if (v_scale >= 4) - v_scale = 4; - else - v_scale = 2; - cfg->ysize *= v_scale; - if (cfg->ysize < expected_ysize) { - if ((standard_id & V4L2_STD_625_50)) { - calculated_xsize = (cfg->ysize * - VPBE_DISPLAY_V_EXP_RATIO_N) / - VPBE_DISPLAY_V_EXP_RATIO_D; - if (calculated_xsize <= expected_ysize) { - v_exp = 1; - cfg->ysize = calculated_xsize; - } - } - } - if (v_scale == 2) - layer_info->v_zoom = ZOOM_X2; - else if (v_scale == 4) - layer_info->v_zoom = ZOOM_X4; - if (v_exp) - layer_info->v_exp = V_EXP_6_OVER_5; - } else { - /* no scaling, only cropping. Set display area to crop area */ - cfg->ysize = expected_ysize; - } - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "crop display xsize = %d, ysize = %d\n", - cfg->xsize, cfg->ysize); -} - -static void vpbe_disp_adj_position(struct vpbe_display *disp_dev, - struct vpbe_layer *layer, - int top, int left) -{ - struct osd_layer_config *cfg = &layer->layer_info.config; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - - cfg->xpos = min((unsigned int)left, - vpbe_dev->current_timings.xres - cfg->xsize); - cfg->ypos = min((unsigned int)top, - vpbe_dev->current_timings.yres - cfg->ysize); - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "new xpos = %d, ypos = %d\n", - cfg->xpos, cfg->ypos); -} - -static void vpbe_disp_check_window_params(struct vpbe_display *disp_dev, - struct v4l2_rect *c) -{ - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - - if ((c->width == 0) || - ((c->width + c->left) > vpbe_dev->current_timings.xres)) - c->width = vpbe_dev->current_timings.xres - c->left; - - if ((c->height == 0) || ((c->height + c->top) > - vpbe_dev->current_timings.yres)) - c->height = vpbe_dev->current_timings.yres - c->top; - - /* window height must be even for interlaced display */ - if (vpbe_dev->current_timings.interlaced) - c->height &= (~0x01); - -} - -/* - * vpbe_try_format() - * If user application provides width and height, and have bytesperline set - * to zero, driver calculates bytesperline and sizeimage based on hardware - * limits. - */ -static int vpbe_try_format(struct vpbe_display *disp_dev, - struct v4l2_pix_format *pixfmt, int check) -{ - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - int min_height = 1; - int min_width = 32; - int max_height; - int max_width; - int bpp; - - if ((pixfmt->pixelformat != V4L2_PIX_FMT_UYVY) && - (pixfmt->pixelformat != V4L2_PIX_FMT_NV12)) - /* choose default as V4L2_PIX_FMT_UYVY */ - pixfmt->pixelformat = V4L2_PIX_FMT_UYVY; - - /* Check the field format */ - if ((pixfmt->field != V4L2_FIELD_INTERLACED) && - (pixfmt->field != V4L2_FIELD_NONE)) { - if (vpbe_dev->current_timings.interlaced) - pixfmt->field = V4L2_FIELD_INTERLACED; - else - pixfmt->field = V4L2_FIELD_NONE; - } - - if (pixfmt->field == V4L2_FIELD_INTERLACED) - min_height = 2; - - if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) - bpp = 1; - else - bpp = 2; - - max_width = vpbe_dev->current_timings.xres; - max_height = vpbe_dev->current_timings.yres; - - min_width /= bpp; - - if (!pixfmt->width || (pixfmt->width < min_width) || - (pixfmt->width > max_width)) { - pixfmt->width = vpbe_dev->current_timings.xres; - } - - if (!pixfmt->height || (pixfmt->height < min_height) || - (pixfmt->height > max_height)) { - pixfmt->height = vpbe_dev->current_timings.yres; - } - - if (pixfmt->bytesperline < (pixfmt->width * bpp)) - pixfmt->bytesperline = pixfmt->width * bpp; - - /* Make the bytesperline 32 byte aligned */ - pixfmt->bytesperline = ((pixfmt->width * bpp + 31) & ~31); - - if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height + - (pixfmt->bytesperline * pixfmt->height >> 1); - else - pixfmt->sizeimage = pixfmt->bytesperline * pixfmt->height; - - return 0; -} - -static int vpbe_display_querycap(struct file *file, void *priv, - struct v4l2_capability *cap) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - snprintf(cap->driver, sizeof(cap->driver), "%s", - dev_name(vpbe_dev->pdev)); - strscpy(cap->card, vpbe_dev->cfg->module_name, sizeof(cap->card)); - - return 0; -} - -static int vpbe_display_s_selection(struct file *file, void *priv, - struct v4l2_selection *sel) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_display *disp_dev = layer->disp_dev; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - struct osd_layer_config *cfg = &layer->layer_info.config; - struct osd_state *osd_device = disp_dev->osd_device; - struct v4l2_rect rect = sel->r; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "VIDIOC_S_SELECTION, layer id = %d\n", layer->device_id); - - if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT || - sel->target != V4L2_SEL_TGT_CROP) - return -EINVAL; - - if (rect.top < 0) - rect.top = 0; - if (rect.left < 0) - rect.left = 0; - - vpbe_disp_check_window_params(disp_dev, &rect); - - osd_device->ops.get_layer_config(osd_device, - layer->layer_info.id, cfg); - - vpbe_disp_calculate_scale_factor(disp_dev, layer, - rect.width, - rect.height); - vpbe_disp_adj_position(disp_dev, layer, rect.top, - rect.left); - ret = osd_device->ops.set_layer_config(osd_device, - layer->layer_info.id, cfg); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Error in set layer config:\n"); - return -EINVAL; - } - - /* apply zooming and h or v expansion */ - osd_device->ops.set_zoom(osd_device, - layer->layer_info.id, - layer->layer_info.h_zoom, - layer->layer_info.v_zoom); - ret = osd_device->ops.set_vid_expansion(osd_device, - layer->layer_info.h_exp, - layer->layer_info.v_exp); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Error in set vid expansion:\n"); - return -EINVAL; - } - - if ((layer->layer_info.h_zoom != ZOOM_X1) || - (layer->layer_info.v_zoom != ZOOM_X1) || - (layer->layer_info.h_exp != H_EXP_OFF) || - (layer->layer_info.v_exp != V_EXP_OFF)) - /* Enable expansion filter */ - osd_device->ops.set_interpolation_filter(osd_device, 1); - else - osd_device->ops.set_interpolation_filter(osd_device, 0); - - sel->r = rect; - return 0; -} - -static int vpbe_display_g_selection(struct file *file, void *priv, - struct v4l2_selection *sel) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct osd_layer_config *cfg = &layer->layer_info.config; - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - struct osd_state *osd_device = layer->disp_dev->osd_device; - struct v4l2_rect *rect = &sel->r; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "VIDIOC_G_SELECTION, layer id = %d\n", - layer->device_id); - - if (sel->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) - return -EINVAL; - - switch (sel->target) { - case V4L2_SEL_TGT_CROP: - osd_device->ops.get_layer_config(osd_device, - layer->layer_info.id, cfg); - rect->top = cfg->ypos; - rect->left = cfg->xpos; - rect->width = cfg->xsize; - rect->height = cfg->ysize; - break; - case V4L2_SEL_TGT_CROP_DEFAULT: - case V4L2_SEL_TGT_CROP_BOUNDS: - rect->left = 0; - rect->top = 0; - rect->width = vpbe_dev->current_timings.xres; - rect->height = vpbe_dev->current_timings.yres; - break; - default: - return -EINVAL; - } - - return 0; -} - -static int vpbe_display_g_pixelaspect(struct file *file, void *priv, - int type, struct v4l2_fract *f) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_CROPCAP ioctl\n"); - - if (type != V4L2_BUF_TYPE_VIDEO_OUTPUT) - return -EINVAL; - - *f = vpbe_dev->current_timings.aspect; - return 0; -} - -static int vpbe_display_g_fmt(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "VIDIOC_G_FMT, layer id = %d\n", - layer->device_id); - - /* If buffer type is video output */ - if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { - v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); - return -EINVAL; - } - /* Fill in the information about format */ - fmt->fmt.pix = layer->pix_fmt; - - return 0; -} - -static int vpbe_display_enum_fmt(struct file *file, void *priv, - struct v4l2_fmtdesc *fmt) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "VIDIOC_ENUM_FMT, layer id = %d\n", - layer->device_id); - if (fmt->index > 1) { - v4l2_err(&vpbe_dev->v4l2_dev, "Invalid format index\n"); - return -EINVAL; - } - - /* Fill in the information about format */ - if (fmt->index == 0) - fmt->pixelformat = V4L2_PIX_FMT_UYVY; - else - fmt->pixelformat = V4L2_PIX_FMT_NV12; - - return 0; -} - -static int vpbe_display_s_fmt(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_display *disp_dev = layer->disp_dev; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - struct osd_layer_config *cfg = &layer->layer_info.config; - struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; - struct osd_state *osd_device = disp_dev->osd_device; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "VIDIOC_S_FMT, layer id = %d\n", - layer->device_id); - - if (vb2_is_busy(&layer->buffer_queue)) - return -EBUSY; - - if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "invalid type\n"); - return -EINVAL; - } - /* Check for valid pixel format */ - ret = vpbe_try_format(disp_dev, pixfmt, 1); - if (ret) - return ret; - - /* YUV420 is requested, check availability of the - other video window */ - - layer->pix_fmt = *pixfmt; - if (pixfmt->pixelformat == V4L2_PIX_FMT_NV12) { - struct vpbe_layer *otherlayer; - - otherlayer = _vpbe_display_get_other_win_layer(disp_dev, layer); - /* if other layer is available, only - * claim it, do not configure it - */ - ret = osd_device->ops.request_layer(osd_device, - otherlayer->layer_info.id); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Display Manager failed to allocate layer\n"); - return -EBUSY; - } - } - - /* Get osd layer config */ - osd_device->ops.get_layer_config(osd_device, - layer->layer_info.id, cfg); - /* Store the pixel format in the layer object */ - cfg->xsize = pixfmt->width; - cfg->ysize = pixfmt->height; - cfg->line_length = pixfmt->bytesperline; - cfg->ypos = 0; - cfg->xpos = 0; - cfg->interlaced = vpbe_dev->current_timings.interlaced; - - if (V4L2_PIX_FMT_UYVY == pixfmt->pixelformat) - cfg->pixfmt = PIXFMT_YCBCRI; - - /* Change of the default pixel format for both video windows */ - if (V4L2_PIX_FMT_NV12 == pixfmt->pixelformat) { - struct vpbe_layer *otherlayer; - cfg->pixfmt = PIXFMT_NV12; - otherlayer = _vpbe_display_get_other_win_layer(disp_dev, - layer); - otherlayer->layer_info.config.pixfmt = PIXFMT_NV12; - } - - /* Set the layer config in the osd window */ - ret = osd_device->ops.set_layer_config(osd_device, - layer->layer_info.id, cfg); - if (ret < 0) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Error in S_FMT params:\n"); - return -EINVAL; - } - - /* Readback and fill the local copy of current pix format */ - osd_device->ops.get_layer_config(osd_device, - layer->layer_info.id, cfg); - - return 0; -} - -static int vpbe_display_try_fmt(struct file *file, void *priv, - struct v4l2_format *fmt) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_display *disp_dev = layer->disp_dev; - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - struct v4l2_pix_format *pixfmt = &fmt->fmt.pix; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_TRY_FMT\n"); - - if (V4L2_BUF_TYPE_VIDEO_OUTPUT != fmt->type) { - v4l2_err(&vpbe_dev->v4l2_dev, "invalid type\n"); - return -EINVAL; - } - - /* Check for valid field format */ - return vpbe_try_format(disp_dev, pixfmt, 0); - -} - -/* - * vpbe_display_s_std - Set the given standard in the encoder - * - * Sets the standard if supported by the current encoder. Return the status. - * 0 - success & -EINVAL on error - */ -static int vpbe_display_s_std(struct file *file, void *priv, - v4l2_std_id std_id) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_STD\n"); - - if (vb2_is_busy(&layer->buffer_queue)) - return -EBUSY; - - if (vpbe_dev->ops.s_std) { - ret = vpbe_dev->ops.s_std(vpbe_dev, std_id); - if (ret) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Failed to set standard for sub devices\n"); - return -EINVAL; - } - } else { - return -EINVAL; - } - - return 0; -} - -/* - * vpbe_display_g_std - Get the standard in the current encoder - * - * Get the standard in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int vpbe_display_g_std(struct file *file, void *priv, - v4l2_std_id *std_id) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_STD\n"); - - /* Get the standard from the current encoder */ - if (vpbe_dev->current_timings.timings_type & VPBE_ENC_STD) { - *std_id = vpbe_dev->current_timings.std_id; - return 0; - } - - return -EINVAL; -} - -/* - * vpbe_display_enum_output - enumerate outputs - * - * Enumerates the outputs available at the vpbe display - * returns the status, -EINVAL if end of output list - */ -static int vpbe_display_enum_output(struct file *file, void *priv, - struct v4l2_output *output) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_OUTPUT\n"); - - /* Enumerate outputs */ - if (!vpbe_dev->ops.enum_outputs) - return -EINVAL; - - ret = vpbe_dev->ops.enum_outputs(vpbe_dev, output); - if (ret) { - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "Failed to enumerate outputs\n"); - return -EINVAL; - } - - return 0; -} - -/* - * vpbe_display_s_output - Set output to - * the output specified by the index - */ -static int vpbe_display_s_output(struct file *file, void *priv, - unsigned int i) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_OUTPUT\n"); - - if (vb2_is_busy(&layer->buffer_queue)) - return -EBUSY; - - if (!vpbe_dev->ops.set_output) - return -EINVAL; - - ret = vpbe_dev->ops.set_output(vpbe_dev, i); - if (ret) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Failed to set output for sub devices\n"); - return -EINVAL; - } - - return 0; -} - -/* - * vpbe_display_g_output - Get output from subdevice - * for a given by the index - */ -static int vpbe_display_g_output(struct file *file, void *priv, - unsigned int *i) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_OUTPUT\n"); - /* Get the standard from the current encoder */ - *i = vpbe_dev->current_out_index; - - return 0; -} - -/* - * vpbe_display_enum_dv_timings - Enumerate the dv timings - * - * enum the timings in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int -vpbe_display_enum_dv_timings(struct file *file, void *priv, - struct v4l2_enum_dv_timings *timings) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_ENUM_DV_TIMINGS\n"); - - /* Enumerate outputs */ - if (!vpbe_dev->ops.enum_dv_timings) - return -EINVAL; - - ret = vpbe_dev->ops.enum_dv_timings(vpbe_dev, timings); - if (ret) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Failed to enumerate dv timings info\n"); - return -EINVAL; - } - - return 0; -} - -/* - * vpbe_display_s_dv_timings - Set the dv timings - * - * Set the timings in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int -vpbe_display_s_dv_timings(struct file *file, void *priv, - struct v4l2_dv_timings *timings) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - int ret; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_S_DV_TIMINGS\n"); - - if (vb2_is_busy(&layer->buffer_queue)) - return -EBUSY; - - /* Set the given standard in the encoder */ - if (!vpbe_dev->ops.s_dv_timings) - return -EINVAL; - - ret = vpbe_dev->ops.s_dv_timings(vpbe_dev, timings); - if (ret) { - v4l2_err(&vpbe_dev->v4l2_dev, - "Failed to set the dv timings info\n"); - return -EINVAL; - } - - return 0; -} - -/* - * vpbe_display_g_dv_timings - Set the dv timings - * - * Get the timings in the current encoder. Return the status. 0 - success - * -EINVAL on error - */ -static int -vpbe_display_g_dv_timings(struct file *file, void *priv, - struct v4l2_dv_timings *dv_timings) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_device *vpbe_dev = layer->disp_dev->vpbe_dev; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "VIDIOC_G_DV_TIMINGS\n"); - - /* Get the given standard in the encoder */ - - if (vpbe_dev->current_timings.timings_type & - VPBE_ENC_DV_TIMINGS) { - *dv_timings = vpbe_dev->current_timings.dv_timings; - } else { - return -EINVAL; - } - - return 0; -} - -/* - * vpbe_display_open() - * It creates object of file handle structure and stores it in private_data - * member of filepointer - */ -static int vpbe_display_open(struct file *file) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct vpbe_display *disp_dev = layer->disp_dev; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - struct osd_state *osd_device = disp_dev->osd_device; - int err; - - /* creating context for file descriptor */ - err = v4l2_fh_open(file); - if (err) { - v4l2_err(&vpbe_dev->v4l2_dev, "v4l2_fh_open failed\n"); - return err; - } - - /* leaving if layer is already initialized */ - if (!v4l2_fh_is_singular_file(file)) - return err; - - if (!layer->usrs) { - if (mutex_lock_interruptible(&layer->opslock)) - return -ERESTARTSYS; - /* First claim the layer for this device */ - err = osd_device->ops.request_layer(osd_device, - layer->layer_info.id); - mutex_unlock(&layer->opslock); - if (err < 0) { - /* Couldn't get layer */ - v4l2_err(&vpbe_dev->v4l2_dev, - "Display Manager failed to allocate layer\n"); - v4l2_fh_release(file); - return -EINVAL; - } - } - /* Increment layer usrs counter */ - layer->usrs++; - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, - "vpbe display device opened successfully\n"); - return 0; -} - -/* - * vpbe_display_release() - * This function deletes buffer queue, frees the buffers and the davinci - * display file * handle - */ -static int vpbe_display_release(struct file *file) -{ - struct vpbe_layer *layer = video_drvdata(file); - struct osd_layer_config *cfg = &layer->layer_info.config; - struct vpbe_display *disp_dev = layer->disp_dev; - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - struct osd_state *osd_device = disp_dev->osd_device; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_release\n"); - - mutex_lock(&layer->opslock); - - osd_device->ops.disable_layer(osd_device, - layer->layer_info.id); - /* Decrement layer usrs counter */ - layer->usrs--; - /* If this file handle has initialize encoder device, reset it */ - if (!layer->usrs) { - if (cfg->pixfmt == PIXFMT_NV12) { - struct vpbe_layer *otherlayer; - otherlayer = - _vpbe_display_get_other_win_layer(disp_dev, layer); - osd_device->ops.disable_layer(osd_device, - otherlayer->layer_info.id); - osd_device->ops.release_layer(osd_device, - otherlayer->layer_info.id); - } - osd_device->ops.disable_layer(osd_device, - layer->layer_info.id); - osd_device->ops.release_layer(osd_device, - layer->layer_info.id); - } - - _vb2_fop_release(file, NULL); - mutex_unlock(&layer->opslock); - - disp_dev->cbcr_ofst = 0; - - return 0; -} - -/* vpbe capture ioctl operations */ -static const struct v4l2_ioctl_ops vpbe_ioctl_ops = { - .vidioc_querycap = vpbe_display_querycap, - .vidioc_g_fmt_vid_out = vpbe_display_g_fmt, - .vidioc_enum_fmt_vid_out = vpbe_display_enum_fmt, - .vidioc_s_fmt_vid_out = vpbe_display_s_fmt, - .vidioc_try_fmt_vid_out = vpbe_display_try_fmt, - - .vidioc_reqbufs = vb2_ioctl_reqbufs, - .vidioc_create_bufs = vb2_ioctl_create_bufs, - .vidioc_querybuf = vb2_ioctl_querybuf, - .vidioc_qbuf = vb2_ioctl_qbuf, - .vidioc_dqbuf = vb2_ioctl_dqbuf, - .vidioc_streamon = vb2_ioctl_streamon, - .vidioc_streamoff = vb2_ioctl_streamoff, - .vidioc_expbuf = vb2_ioctl_expbuf, - - .vidioc_g_pixelaspect = vpbe_display_g_pixelaspect, - .vidioc_g_selection = vpbe_display_g_selection, - .vidioc_s_selection = vpbe_display_s_selection, - - .vidioc_s_std = vpbe_display_s_std, - .vidioc_g_std = vpbe_display_g_std, - - .vidioc_enum_output = vpbe_display_enum_output, - .vidioc_s_output = vpbe_display_s_output, - .vidioc_g_output = vpbe_display_g_output, - - .vidioc_s_dv_timings = vpbe_display_s_dv_timings, - .vidioc_g_dv_timings = vpbe_display_g_dv_timings, - .vidioc_enum_dv_timings = vpbe_display_enum_dv_timings, -}; - -static const struct v4l2_file_operations vpbe_fops = { - .owner = THIS_MODULE, - .open = vpbe_display_open, - .release = vpbe_display_release, - .unlocked_ioctl = video_ioctl2, - .mmap = vb2_fop_mmap, - .poll = vb2_fop_poll, -}; - -static int vpbe_device_get(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct vpbe_display *vpbe_disp = data; - - if (strcmp("vpbe_controller", pdev->name) == 0) - vpbe_disp->vpbe_dev = platform_get_drvdata(pdev); - - if (strstr(pdev->name, "vpbe-osd")) - vpbe_disp->osd_device = platform_get_drvdata(pdev); - - return 0; -} - -static int init_vpbe_layer(int i, struct vpbe_display *disp_dev, - struct platform_device *pdev) -{ - struct vpbe_layer *vpbe_display_layer = NULL; - struct video_device *vbd = NULL; - - /* Allocate memory for four plane display objects */ - disp_dev->dev[i] = kzalloc(sizeof(*disp_dev->dev[i]), GFP_KERNEL); - if (!disp_dev->dev[i]) - return -ENOMEM; - - spin_lock_init(&disp_dev->dev[i]->irqlock); - mutex_init(&disp_dev->dev[i]->opslock); - - /* Get the pointer to the layer object */ - vpbe_display_layer = disp_dev->dev[i]; - vbd = &vpbe_display_layer->video_dev; - /* Initialize field of video device */ - vbd->release = video_device_release_empty; - vbd->fops = &vpbe_fops; - vbd->ioctl_ops = &vpbe_ioctl_ops; - vbd->minor = -1; - vbd->v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; - vbd->lock = &vpbe_display_layer->opslock; - vbd->vfl_dir = VFL_DIR_TX; - vbd->device_caps = V4L2_CAP_VIDEO_OUTPUT | V4L2_CAP_STREAMING; - - if (disp_dev->vpbe_dev->current_timings.timings_type & - VPBE_ENC_STD) - vbd->tvnorms = (V4L2_STD_525_60 | V4L2_STD_625_50); - - snprintf(vbd->name, sizeof(vbd->name), - "DaVinci_VPBE Display_DRIVER_V%d.%d.%d", - (VPBE_DISPLAY_VERSION_CODE >> 16) & 0xff, - (VPBE_DISPLAY_VERSION_CODE >> 8) & 0xff, - (VPBE_DISPLAY_VERSION_CODE) & 0xff); - - vpbe_display_layer->device_id = i; - - vpbe_display_layer->layer_info.id = - ((i == VPBE_DISPLAY_DEVICE_0) ? WIN_VID0 : WIN_VID1); - - - return 0; -} - -static int register_device(struct vpbe_layer *vpbe_display_layer, - struct vpbe_display *disp_dev, - struct platform_device *pdev) -{ - int err; - - v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, - "Trying to register VPBE display device.\n"); - v4l2_info(&disp_dev->vpbe_dev->v4l2_dev, - "layer=%p,layer->video_dev=%p\n", - vpbe_display_layer, - &vpbe_display_layer->video_dev); - - vpbe_display_layer->video_dev.queue = &vpbe_display_layer->buffer_queue; - err = video_register_device(&vpbe_display_layer->video_dev, - VFL_TYPE_VIDEO, - -1); - if (err) - return -ENODEV; - - vpbe_display_layer->disp_dev = disp_dev; - /* set the driver data in platform device */ - platform_set_drvdata(pdev, disp_dev); - video_set_drvdata(&vpbe_display_layer->video_dev, - vpbe_display_layer); - - return 0; -} - - - -/* - * vpbe_display_probe() - * This function creates device entries by register itself to the V4L2 driver - * and initializes fields of each layer objects - */ -static int vpbe_display_probe(struct platform_device *pdev) -{ - struct vpbe_display *disp_dev; - struct v4l2_device *v4l2_dev; - struct resource *res = NULL; - struct vb2_queue *q; - int k; - int i; - int err; - int irq; - - printk(KERN_DEBUG "vpbe_display_probe\n"); - /* Allocate memory for vpbe_display */ - disp_dev = devm_kzalloc(&pdev->dev, sizeof(*disp_dev), GFP_KERNEL); - if (!disp_dev) - return -ENOMEM; - - spin_lock_init(&disp_dev->dma_queue_lock); - /* - * Scan all the platform devices to find the vpbe - * controller device and get the vpbe_dev object - */ - err = bus_for_each_dev(&platform_bus_type, NULL, disp_dev, - vpbe_device_get); - if (err < 0) - return err; - - v4l2_dev = &disp_dev->vpbe_dev->v4l2_dev; - /* Initialize the vpbe display controller */ - if (disp_dev->vpbe_dev->ops.initialize) { - err = disp_dev->vpbe_dev->ops.initialize(&pdev->dev, - disp_dev->vpbe_dev); - if (err) { - v4l2_err(v4l2_dev, "Error initing vpbe\n"); - err = -ENOMEM; - goto probe_out; - } - } - - for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { - if (init_vpbe_layer(i, disp_dev, pdev)) { - err = -ENODEV; - goto probe_out; - } - } - - res = platform_get_resource(pdev, IORESOURCE_IRQ, 0); - if (!res) { - v4l2_err(v4l2_dev, "Unable to get VENC interrupt resource\n"); - err = -ENODEV; - goto probe_out; - } - - irq = res->start; - err = devm_request_irq(&pdev->dev, irq, venc_isr, 0, - VPBE_DISPLAY_DRIVER, disp_dev); - if (err) { - v4l2_err(v4l2_dev, "VPBE IRQ request failed\n"); - goto probe_out; - } - - for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { - /* initialize vb2 queue */ - q = &disp_dev->dev[i]->buffer_queue; - memset(q, 0, sizeof(*q)); - q->type = V4L2_BUF_TYPE_VIDEO_OUTPUT; - q->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF; - q->drv_priv = disp_dev->dev[i]; - q->ops = &video_qops; - q->mem_ops = &vb2_dma_contig_memops; - q->buf_struct_size = sizeof(struct vpbe_disp_buffer); - q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; - q->min_buffers_needed = 1; - q->lock = &disp_dev->dev[i]->opslock; - q->dev = disp_dev->vpbe_dev->pdev; - err = vb2_queue_init(q); - if (err) { - v4l2_err(v4l2_dev, "vb2_queue_init() failed\n"); - goto probe_out; - } - - INIT_LIST_HEAD(&disp_dev->dev[i]->dma_queue); - - if (register_device(disp_dev->dev[i], disp_dev, pdev)) { - err = -ENODEV; - goto probe_out; - } - } - - v4l2_dbg(1, debug, v4l2_dev, - "Successfully completed the probing of vpbe v4l2 device\n"); - - return 0; - -probe_out: - for (k = 0; k < VPBE_DISPLAY_MAX_DEVICES; k++) { - /* Unregister video device */ - if (disp_dev->dev[k]) { - video_unregister_device(&disp_dev->dev[k]->video_dev); - kfree(disp_dev->dev[k]); - } - } - return err; -} - -/* - * vpbe_display_remove() - * It un-register hardware layer from V4L2 driver - */ -static int vpbe_display_remove(struct platform_device *pdev) -{ - struct vpbe_layer *vpbe_display_layer; - struct vpbe_display *disp_dev = platform_get_drvdata(pdev); - struct vpbe_device *vpbe_dev = disp_dev->vpbe_dev; - int i; - - v4l2_dbg(1, debug, &vpbe_dev->v4l2_dev, "vpbe_display_remove\n"); - - /* deinitialize the vpbe display controller */ - if (vpbe_dev->ops.deinitialize) - vpbe_dev->ops.deinitialize(&pdev->dev, vpbe_dev); - /* un-register device */ - for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { - /* Get the pointer to the layer object */ - vpbe_display_layer = disp_dev->dev[i]; - /* Unregister video device */ - video_unregister_device(&vpbe_display_layer->video_dev); - - } - for (i = 0; i < VPBE_DISPLAY_MAX_DEVICES; i++) { - kfree(disp_dev->dev[i]); - disp_dev->dev[i] = NULL; - } - - return 0; -} - -static struct platform_driver vpbe_display_driver = { - .driver = { - .name = VPBE_DISPLAY_DRIVER, - .bus = &platform_bus_type, - }, - .probe = vpbe_display_probe, - .remove = vpbe_display_remove, -}; - -module_platform_driver(vpbe_display_driver); - -MODULE_DESCRIPTION("TI DM644x/DM355/DM365 VPBE Display controller"); -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/ti/davinci/vpbe_osd.c b/drivers/media/platform/ti/davinci/vpbe_osd.c deleted file mode 100644 index 32f7ef547c82..000000000000 --- a/drivers/media/platform/ti/davinci/vpbe_osd.c +++ /dev/null @@ -1,1582 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2007-2010 Texas Instruments Inc - * Copyright (C) 2007 MontaVista Software, Inc. - * - * Andy Lowe (alowe@mvista.com), MontaVista Software - * - Initial version - * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. - * - ported to sub device interface - */ -#include -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include -#include "vpbe_osd_regs.h" - -#define MODULE_NAME "davinci-vpbe-osd" - -static const struct platform_device_id vpbe_osd_devtype[] = { - { - .name = DM644X_VPBE_OSD_SUBDEV_NAME, - .driver_data = VPBE_VERSION_1, - }, { - .name = DM365_VPBE_OSD_SUBDEV_NAME, - .driver_data = VPBE_VERSION_2, - }, { - .name = DM355_VPBE_OSD_SUBDEV_NAME, - .driver_data = VPBE_VERSION_3, - }, - { - /* sentinel */ - } -}; - -MODULE_DEVICE_TABLE(platform, vpbe_osd_devtype); - -/* register access routines */ -static inline u32 __always_unused osd_read(struct osd_state *sd, u32 offset) -{ - struct osd_state *osd = sd; - - return readl(osd->osd_base + offset); -} - -static inline u32 osd_write(struct osd_state *sd, u32 val, u32 offset) -{ - struct osd_state *osd = sd; - - writel(val, osd->osd_base + offset); - - return val; -} - -static inline u32 osd_set(struct osd_state *sd, u32 mask, u32 offset) -{ - struct osd_state *osd = sd; - - void __iomem *addr = osd->osd_base + offset; - u32 val = readl(addr) | mask; - - writel(val, addr); - - return val; -} - -static inline u32 osd_clear(struct osd_state *sd, u32 mask, u32 offset) -{ - struct osd_state *osd = sd; - - void __iomem *addr = osd->osd_base + offset; - u32 val = readl(addr) & ~mask; - - writel(val, addr); - - return val; -} - -static inline u32 osd_modify(struct osd_state *sd, u32 mask, u32 val, - u32 offset) -{ - struct osd_state *osd = sd; - - void __iomem *addr = osd->osd_base + offset; - u32 new_val = (readl(addr) & ~mask) | (val & mask); - - writel(new_val, addr); - - return new_val; -} - -/* define some macros for layer and pixfmt classification */ -#define is_osd_win(layer) (((layer) == WIN_OSD0) || ((layer) == WIN_OSD1)) -#define is_vid_win(layer) (((layer) == WIN_VID0) || ((layer) == WIN_VID1)) -#define is_rgb_pixfmt(pixfmt) \ - (((pixfmt) == PIXFMT_RGB565) || ((pixfmt) == PIXFMT_RGB888)) -#define is_yc_pixfmt(pixfmt) \ - (((pixfmt) == PIXFMT_YCBCRI) || ((pixfmt) == PIXFMT_YCRCBI) || \ - ((pixfmt) == PIXFMT_NV12)) -#define MAX_WIN_SIZE OSD_VIDWIN0XP_V0X -#define MAX_LINE_LENGTH (OSD_VIDWIN0OFST_V0LO << 5) - -/** - * _osd_dm6446_vid0_pingpong() - field inversion fix for DM6446 - * @sd: ptr to struct osd_state - * @field_inversion: inversion flag - * @fb_base_phys: frame buffer address - * @lconfig: ptr to layer config - * - * This routine implements a workaround for the field signal inversion silicon - * erratum described in Advisory 1.3.8 for the DM6446. The fb_base_phys and - * lconfig parameters apply to the vid0 window. This routine should be called - * whenever the vid0 layer configuration or start address is modified, or when - * the OSD field inversion setting is modified. - * Returns: 1 if the ping-pong buffers need to be toggled in the vsync isr, or - * 0 otherwise - */ -static int _osd_dm6446_vid0_pingpong(struct osd_state *sd, - int field_inversion, - unsigned long fb_base_phys, - const struct osd_layer_config *lconfig) -{ - struct osd_platform_data *pdata; - - pdata = (struct osd_platform_data *)sd->dev->platform_data; - if (pdata != NULL && pdata->field_inv_wa_enable) { - - if (!field_inversion || !lconfig->interlaced) { - osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); - osd_write(sd, fb_base_phys & ~0x1F, OSD_PPVWIN0ADR); - osd_modify(sd, OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, 0, - OSD_MISCCTL); - return 0; - } else { - unsigned miscctl = OSD_MISCCTL_PPRV; - - osd_write(sd, - (fb_base_phys & ~0x1F) - lconfig->line_length, - OSD_VIDWIN0ADR); - osd_write(sd, - (fb_base_phys & ~0x1F) + lconfig->line_length, - OSD_PPVWIN0ADR); - osd_modify(sd, - OSD_MISCCTL_PPSW | OSD_MISCCTL_PPRV, miscctl, - OSD_MISCCTL); - - return 1; - } - } - - return 0; -} - -static void _osd_set_field_inversion(struct osd_state *sd, int enable) -{ - unsigned fsinv = 0; - - if (enable) - fsinv = OSD_MODE_FSINV; - - osd_modify(sd, OSD_MODE_FSINV, fsinv, OSD_MODE); -} - -static void _osd_set_blink_attribute(struct osd_state *sd, int enable, - enum osd_blink_interval blink) -{ - u32 osdatrmd = 0; - - if (enable) { - osdatrmd |= OSD_OSDATRMD_BLNK; - osdatrmd |= blink << OSD_OSDATRMD_BLNKINT_SHIFT; - } - /* caller must ensure that OSD1 is configured in attribute mode */ - osd_modify(sd, OSD_OSDATRMD_BLNKINT | OSD_OSDATRMD_BLNK, osdatrmd, - OSD_OSDATRMD); -} - -static void _osd_set_rom_clut(struct osd_state *sd, - enum osd_rom_clut rom_clut) -{ - if (rom_clut == ROM_CLUT0) - osd_clear(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); - else - osd_set(sd, OSD_MISCCTL_RSEL, OSD_MISCCTL); -} - -static void _osd_set_palette_map(struct osd_state *sd, - enum osd_win_layer osdwin, - unsigned char pixel_value, - unsigned char clut_index, - enum osd_pix_format pixfmt) -{ - static const int map_2bpp[] = { 0, 5, 10, 15 }; - static const int map_1bpp[] = { 0, 15 }; - int bmp_offset; - int bmp_shift; - int bmp_mask; - int bmp_reg; - - switch (pixfmt) { - case PIXFMT_1BPP: - bmp_reg = map_1bpp[pixel_value & 0x1]; - break; - case PIXFMT_2BPP: - bmp_reg = map_2bpp[pixel_value & 0x3]; - break; - case PIXFMT_4BPP: - bmp_reg = pixel_value & 0xf; - break; - default: - return; - } - - switch (osdwin) { - case OSDWIN_OSD0: - bmp_offset = OSD_W0BMP01 + (bmp_reg >> 1) * sizeof(u32); - break; - case OSDWIN_OSD1: - bmp_offset = OSD_W1BMP01 + (bmp_reg >> 1) * sizeof(u32); - break; - default: - return; - } - - if (bmp_reg & 1) { - bmp_shift = 8; - bmp_mask = 0xff << 8; - } else { - bmp_shift = 0; - bmp_mask = 0xff; - } - - osd_modify(sd, bmp_mask, clut_index << bmp_shift, bmp_offset); -} - -static void _osd_set_rec601_attenuation(struct osd_state *sd, - enum osd_win_layer osdwin, int enable) -{ - switch (osdwin) { - case OSDWIN_OSD0: - osd_modify(sd, OSD_OSDWIN0MD_ATN0E, - enable ? OSD_OSDWIN0MD_ATN0E : 0, - OSD_OSDWIN0MD); - if (sd->vpbe_type == VPBE_VERSION_1) - osd_modify(sd, OSD_OSDWIN0MD_ATN0E, - enable ? OSD_OSDWIN0MD_ATN0E : 0, - OSD_OSDWIN0MD); - else if ((sd->vpbe_type == VPBE_VERSION_3) || - (sd->vpbe_type == VPBE_VERSION_2)) - osd_modify(sd, OSD_EXTMODE_ATNOSD0EN, - enable ? OSD_EXTMODE_ATNOSD0EN : 0, - OSD_EXTMODE); - break; - case OSDWIN_OSD1: - osd_modify(sd, OSD_OSDWIN1MD_ATN1E, - enable ? OSD_OSDWIN1MD_ATN1E : 0, - OSD_OSDWIN1MD); - if (sd->vpbe_type == VPBE_VERSION_1) - osd_modify(sd, OSD_OSDWIN1MD_ATN1E, - enable ? OSD_OSDWIN1MD_ATN1E : 0, - OSD_OSDWIN1MD); - else if ((sd->vpbe_type == VPBE_VERSION_3) || - (sd->vpbe_type == VPBE_VERSION_2)) - osd_modify(sd, OSD_EXTMODE_ATNOSD1EN, - enable ? OSD_EXTMODE_ATNOSD1EN : 0, - OSD_EXTMODE); - break; - } -} - -static void _osd_set_blending_factor(struct osd_state *sd, - enum osd_win_layer osdwin, - enum osd_blending_factor blend) -{ - switch (osdwin) { - case OSDWIN_OSD0: - osd_modify(sd, OSD_OSDWIN0MD_BLND0, - blend << OSD_OSDWIN0MD_BLND0_SHIFT, OSD_OSDWIN0MD); - break; - case OSDWIN_OSD1: - osd_modify(sd, OSD_OSDWIN1MD_BLND1, - blend << OSD_OSDWIN1MD_BLND1_SHIFT, OSD_OSDWIN1MD); - break; - } -} - -static void _osd_enable_rgb888_pixblend(struct osd_state *sd, - enum osd_win_layer osdwin) -{ - - osd_modify(sd, OSD_MISCCTL_BLDSEL, 0, OSD_MISCCTL); - switch (osdwin) { - case OSDWIN_OSD0: - osd_modify(sd, OSD_EXTMODE_OSD0BLDCHR, - OSD_EXTMODE_OSD0BLDCHR, OSD_EXTMODE); - break; - case OSDWIN_OSD1: - osd_modify(sd, OSD_EXTMODE_OSD1BLDCHR, - OSD_EXTMODE_OSD1BLDCHR, OSD_EXTMODE); - break; - } -} - -static void _osd_enable_color_key(struct osd_state *sd, - enum osd_win_layer osdwin, - unsigned colorkey, - enum osd_pix_format pixfmt) -{ - switch (pixfmt) { - case PIXFMT_1BPP: - case PIXFMT_2BPP: - case PIXFMT_4BPP: - case PIXFMT_8BPP: - if (sd->vpbe_type == VPBE_VERSION_3) { - switch (osdwin) { - case OSDWIN_OSD0: - osd_modify(sd, OSD_TRANSPBMPIDX_BMP0, - colorkey << - OSD_TRANSPBMPIDX_BMP0_SHIFT, - OSD_TRANSPBMPIDX); - break; - case OSDWIN_OSD1: - osd_modify(sd, OSD_TRANSPBMPIDX_BMP1, - colorkey << - OSD_TRANSPBMPIDX_BMP1_SHIFT, - OSD_TRANSPBMPIDX); - break; - } - } - break; - case PIXFMT_RGB565: - if (sd->vpbe_type == VPBE_VERSION_1) - osd_write(sd, colorkey & OSD_TRANSPVAL_RGBTRANS, - OSD_TRANSPVAL); - else if (sd->vpbe_type == VPBE_VERSION_3) - osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL, - OSD_TRANSPVALL); - break; - case PIXFMT_YCBCRI: - case PIXFMT_YCRCBI: - if (sd->vpbe_type == VPBE_VERSION_3) - osd_modify(sd, OSD_TRANSPVALU_Y, colorkey, - OSD_TRANSPVALU); - break; - case PIXFMT_RGB888: - if (sd->vpbe_type == VPBE_VERSION_3) { - osd_write(sd, colorkey & OSD_TRANSPVALL_RGBL, - OSD_TRANSPVALL); - osd_modify(sd, OSD_TRANSPVALU_RGBU, colorkey >> 16, - OSD_TRANSPVALU); - } - break; - default: - break; - } - - switch (osdwin) { - case OSDWIN_OSD0: - osd_set(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); - break; - case OSDWIN_OSD1: - osd_set(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); - break; - } -} - -static void _osd_disable_color_key(struct osd_state *sd, - enum osd_win_layer osdwin) -{ - switch (osdwin) { - case OSDWIN_OSD0: - osd_clear(sd, OSD_OSDWIN0MD_TE0, OSD_OSDWIN0MD); - break; - case OSDWIN_OSD1: - osd_clear(sd, OSD_OSDWIN1MD_TE1, OSD_OSDWIN1MD); - break; - } -} - -static void _osd_set_osd_clut(struct osd_state *sd, - enum osd_win_layer osdwin, - enum osd_clut clut) -{ - u32 winmd = 0; - - switch (osdwin) { - case OSDWIN_OSD0: - if (clut == RAM_CLUT) - winmd |= OSD_OSDWIN0MD_CLUTS0; - osd_modify(sd, OSD_OSDWIN0MD_CLUTS0, winmd, OSD_OSDWIN0MD); - break; - case OSDWIN_OSD1: - if (clut == RAM_CLUT) - winmd |= OSD_OSDWIN1MD_CLUTS1; - osd_modify(sd, OSD_OSDWIN1MD_CLUTS1, winmd, OSD_OSDWIN1MD); - break; - } -} - -static void _osd_set_zoom(struct osd_state *sd, enum osd_layer layer, - enum osd_zoom_factor h_zoom, - enum osd_zoom_factor v_zoom) -{ - u32 winmd = 0; - - switch (layer) { - case WIN_OSD0: - winmd |= (h_zoom << OSD_OSDWIN0MD_OHZ0_SHIFT); - winmd |= (v_zoom << OSD_OSDWIN0MD_OVZ0_SHIFT); - osd_modify(sd, OSD_OSDWIN0MD_OHZ0 | OSD_OSDWIN0MD_OVZ0, winmd, - OSD_OSDWIN0MD); - break; - case WIN_VID0: - winmd |= (h_zoom << OSD_VIDWINMD_VHZ0_SHIFT); - winmd |= (v_zoom << OSD_VIDWINMD_VVZ0_SHIFT); - osd_modify(sd, OSD_VIDWINMD_VHZ0 | OSD_VIDWINMD_VVZ0, winmd, - OSD_VIDWINMD); - break; - case WIN_OSD1: - winmd |= (h_zoom << OSD_OSDWIN1MD_OHZ1_SHIFT); - winmd |= (v_zoom << OSD_OSDWIN1MD_OVZ1_SHIFT); - osd_modify(sd, OSD_OSDWIN1MD_OHZ1 | OSD_OSDWIN1MD_OVZ1, winmd, - OSD_OSDWIN1MD); - break; - case WIN_VID1: - winmd |= (h_zoom << OSD_VIDWINMD_VHZ1_SHIFT); - winmd |= (v_zoom << OSD_VIDWINMD_VVZ1_SHIFT); - osd_modify(sd, OSD_VIDWINMD_VHZ1 | OSD_VIDWINMD_VVZ1, winmd, - OSD_VIDWINMD); - break; - } -} - -static void _osd_disable_layer(struct osd_state *sd, enum osd_layer layer) -{ - switch (layer) { - case WIN_OSD0: - osd_clear(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); - break; - case WIN_VID0: - osd_clear(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); - break; - case WIN_OSD1: - /* disable attribute mode as well as disabling the window */ - osd_clear(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, - OSD_OSDWIN1MD); - break; - case WIN_VID1: - osd_clear(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); - break; - } -} - -static void osd_disable_layer(struct osd_state *sd, enum osd_layer layer) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - if (!win->is_enabled) { - spin_unlock_irqrestore(&osd->lock, flags); - return; - } - win->is_enabled = 0; - - _osd_disable_layer(sd, layer); - - spin_unlock_irqrestore(&osd->lock, flags); -} - -static void _osd_enable_attribute_mode(struct osd_state *sd) -{ - /* enable attribute mode for OSD1 */ - osd_set(sd, OSD_OSDWIN1MD_OASW, OSD_OSDWIN1MD); -} - -static void _osd_enable_layer(struct osd_state *sd, enum osd_layer layer) -{ - switch (layer) { - case WIN_OSD0: - osd_set(sd, OSD_OSDWIN0MD_OACT0, OSD_OSDWIN0MD); - break; - case WIN_VID0: - osd_set(sd, OSD_VIDWINMD_ACT0, OSD_VIDWINMD); - break; - case WIN_OSD1: - /* enable OSD1 and disable attribute mode */ - osd_modify(sd, OSD_OSDWIN1MD_OASW | OSD_OSDWIN1MD_OACT1, - OSD_OSDWIN1MD_OACT1, OSD_OSDWIN1MD); - break; - case WIN_VID1: - osd_set(sd, OSD_VIDWINMD_ACT1, OSD_VIDWINMD); - break; - } -} - -static int osd_enable_layer(struct osd_state *sd, enum osd_layer layer, - int otherwin) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - struct osd_layer_config *cfg = &win->lconfig; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - /* - * use otherwin flag to know this is the other vid window - * in YUV420 mode, if is, skip this check - */ - if (!otherwin && (!win->is_allocated || - !win->fb_base_phys || - !cfg->line_length || - !cfg->xsize || - !cfg->ysize)) { - spin_unlock_irqrestore(&osd->lock, flags); - return -1; - } - - if (win->is_enabled) { - spin_unlock_irqrestore(&osd->lock, flags); - return 0; - } - win->is_enabled = 1; - - if (cfg->pixfmt != PIXFMT_OSD_ATTR) - _osd_enable_layer(sd, layer); - else { - _osd_enable_attribute_mode(sd); - _osd_set_blink_attribute(sd, osd->is_blinking, osd->blink); - } - - spin_unlock_irqrestore(&osd->lock, flags); - - return 0; -} - -#define OSD_SRC_ADDR_HIGH4 0x7800000 -#define OSD_SRC_ADDR_HIGH7 0x7F0000 -#define OSD_SRCADD_OFSET_SFT 23 -#define OSD_SRCADD_ADD_SFT 16 -#define OSD_WINADL_MASK 0xFFFF -#define OSD_WINOFST_MASK 0x1000 -#define VPBE_REG_BASE 0x80000000 - -static void _osd_start_layer(struct osd_state *sd, enum osd_layer layer, - unsigned long fb_base_phys, - unsigned long cbcr_ofst) -{ - - if (sd->vpbe_type == VPBE_VERSION_1) { - switch (layer) { - case WIN_OSD0: - osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN0ADR); - break; - case WIN_VID0: - osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN0ADR); - break; - case WIN_OSD1: - osd_write(sd, fb_base_phys & ~0x1F, OSD_OSDWIN1ADR); - break; - case WIN_VID1: - osd_write(sd, fb_base_phys & ~0x1F, OSD_VIDWIN1ADR); - break; - } - } else if (sd->vpbe_type == VPBE_VERSION_3) { - unsigned long fb_offset_32 = - (fb_base_phys - VPBE_REG_BASE) >> 5; - - switch (layer) { - case WIN_OSD0: - osd_modify(sd, OSD_OSDWINADH_O0AH, - fb_offset_32 >> (OSD_SRCADD_ADD_SFT - - OSD_OSDWINADH_O0AH_SHIFT), - OSD_OSDWINADH); - osd_write(sd, fb_offset_32 & OSD_OSDWIN0ADL_O0AL, - OSD_OSDWIN0ADL); - break; - case WIN_VID0: - osd_modify(sd, OSD_VIDWINADH_V0AH, - fb_offset_32 >> (OSD_SRCADD_ADD_SFT - - OSD_VIDWINADH_V0AH_SHIFT), - OSD_VIDWINADH); - osd_write(sd, fb_offset_32 & OSD_VIDWIN0ADL_V0AL, - OSD_VIDWIN0ADL); - break; - case WIN_OSD1: - osd_modify(sd, OSD_OSDWINADH_O1AH, - fb_offset_32 >> (OSD_SRCADD_ADD_SFT - - OSD_OSDWINADH_O1AH_SHIFT), - OSD_OSDWINADH); - osd_write(sd, fb_offset_32 & OSD_OSDWIN1ADL_O1AL, - OSD_OSDWIN1ADL); - break; - case WIN_VID1: - osd_modify(sd, OSD_VIDWINADH_V1AH, - fb_offset_32 >> (OSD_SRCADD_ADD_SFT - - OSD_VIDWINADH_V1AH_SHIFT), - OSD_VIDWINADH); - osd_write(sd, fb_offset_32 & OSD_VIDWIN1ADL_V1AL, - OSD_VIDWIN1ADL); - break; - } - } else if (sd->vpbe_type == VPBE_VERSION_2) { - struct osd_window_state *win = &sd->win[layer]; - unsigned long fb_offset_32, cbcr_offset_32; - - fb_offset_32 = fb_base_phys - VPBE_REG_BASE; - if (cbcr_ofst) - cbcr_offset_32 = cbcr_ofst; - else - cbcr_offset_32 = win->lconfig.line_length * - win->lconfig.ysize; - cbcr_offset_32 += fb_offset_32; - fb_offset_32 = fb_offset_32 >> 5; - cbcr_offset_32 = cbcr_offset_32 >> 5; - /* - * DM365: start address is 27-bit long address b26 - b23 are - * in offset register b12 - b9, and * bit 26 has to be '1' - */ - if (win->lconfig.pixfmt == PIXFMT_NV12) { - switch (layer) { - case WIN_VID0: - case WIN_VID1: - /* Y is in VID0 */ - osd_modify(sd, OSD_VIDWIN0OFST_V0AH, - ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> - (OSD_SRCADD_OFSET_SFT - - OSD_WINOFST_AH_SHIFT)) | - OSD_WINOFST_MASK, OSD_VIDWIN0OFST); - osd_modify(sd, OSD_VIDWINADH_V0AH, - (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> - (OSD_SRCADD_ADD_SFT - - OSD_VIDWINADH_V0AH_SHIFT), - OSD_VIDWINADH); - osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, - OSD_VIDWIN0ADL); - /* CbCr is in VID1 */ - osd_modify(sd, OSD_VIDWIN1OFST_V1AH, - ((cbcr_offset_32 & - OSD_SRC_ADDR_HIGH4) >> - (OSD_SRCADD_OFSET_SFT - - OSD_WINOFST_AH_SHIFT)) | - OSD_WINOFST_MASK, OSD_VIDWIN1OFST); - osd_modify(sd, OSD_VIDWINADH_V1AH, - (cbcr_offset_32 & - OSD_SRC_ADDR_HIGH7) >> - (OSD_SRCADD_ADD_SFT - - OSD_VIDWINADH_V1AH_SHIFT), - OSD_VIDWINADH); - osd_write(sd, cbcr_offset_32 & OSD_WINADL_MASK, - OSD_VIDWIN1ADL); - break; - default: - break; - } - } - - switch (layer) { - case WIN_OSD0: - osd_modify(sd, OSD_OSDWIN0OFST_O0AH, - ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> - (OSD_SRCADD_OFSET_SFT - - OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK, - OSD_OSDWIN0OFST); - osd_modify(sd, OSD_OSDWINADH_O0AH, - (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> - (OSD_SRCADD_ADD_SFT - - OSD_OSDWINADH_O0AH_SHIFT), OSD_OSDWINADH); - osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, - OSD_OSDWIN0ADL); - break; - case WIN_VID0: - if (win->lconfig.pixfmt != PIXFMT_NV12) { - osd_modify(sd, OSD_VIDWIN0OFST_V0AH, - ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> - (OSD_SRCADD_OFSET_SFT - - OSD_WINOFST_AH_SHIFT)) | - OSD_WINOFST_MASK, OSD_VIDWIN0OFST); - osd_modify(sd, OSD_VIDWINADH_V0AH, - (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> - (OSD_SRCADD_ADD_SFT - - OSD_VIDWINADH_V0AH_SHIFT), - OSD_VIDWINADH); - osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, - OSD_VIDWIN0ADL); - } - break; - case WIN_OSD1: - osd_modify(sd, OSD_OSDWIN1OFST_O1AH, - ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> - (OSD_SRCADD_OFSET_SFT - - OSD_WINOFST_AH_SHIFT)) | OSD_WINOFST_MASK, - OSD_OSDWIN1OFST); - osd_modify(sd, OSD_OSDWINADH_O1AH, - (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> - (OSD_SRCADD_ADD_SFT - - OSD_OSDWINADH_O1AH_SHIFT), - OSD_OSDWINADH); - osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, - OSD_OSDWIN1ADL); - break; - case WIN_VID1: - if (win->lconfig.pixfmt != PIXFMT_NV12) { - osd_modify(sd, OSD_VIDWIN1OFST_V1AH, - ((fb_offset_32 & OSD_SRC_ADDR_HIGH4) >> - (OSD_SRCADD_OFSET_SFT - - OSD_WINOFST_AH_SHIFT)) | - OSD_WINOFST_MASK, OSD_VIDWIN1OFST); - osd_modify(sd, OSD_VIDWINADH_V1AH, - (fb_offset_32 & OSD_SRC_ADDR_HIGH7) >> - (OSD_SRCADD_ADD_SFT - - OSD_VIDWINADH_V1AH_SHIFT), - OSD_VIDWINADH); - osd_write(sd, fb_offset_32 & OSD_WINADL_MASK, - OSD_VIDWIN1ADL); - } - break; - } - } -} - -static void osd_start_layer(struct osd_state *sd, enum osd_layer layer, - unsigned long fb_base_phys, - unsigned long cbcr_ofst) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - struct osd_layer_config *cfg = &win->lconfig; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - win->fb_base_phys = fb_base_phys & ~0x1F; - _osd_start_layer(sd, layer, fb_base_phys, cbcr_ofst); - - if (layer == WIN_VID0) { - osd->pingpong = - _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, - win->fb_base_phys, - cfg); - } - - spin_unlock_irqrestore(&osd->lock, flags); -} - -static void osd_get_layer_config(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - *lconfig = win->lconfig; - - spin_unlock_irqrestore(&osd->lock, flags); -} - -/** - * try_layer_config() - Try a specific configuration for the layer - * @sd: ptr to struct osd_state - * @layer: layer to configure - * @lconfig: layer configuration to try - * - * If the requested lconfig is completely rejected and the value of lconfig on - * exit is the current lconfig, then try_layer_config() returns 1. Otherwise, - * try_layer_config() returns 0. A return value of 0 does not necessarily mean - * that the value of lconfig on exit is identical to the value of lconfig on - * entry, but merely that it represents a change from the current lconfig. - */ -static int try_layer_config(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - int bad_config = 0; - - /* verify that the pixel format is compatible with the layer */ - switch (lconfig->pixfmt) { - case PIXFMT_1BPP: - case PIXFMT_2BPP: - case PIXFMT_4BPP: - case PIXFMT_8BPP: - case PIXFMT_RGB565: - if (osd->vpbe_type == VPBE_VERSION_1) - bad_config = !is_vid_win(layer); - break; - case PIXFMT_YCBCRI: - case PIXFMT_YCRCBI: - bad_config = !is_vid_win(layer); - break; - case PIXFMT_RGB888: - if (osd->vpbe_type == VPBE_VERSION_1) - bad_config = !is_vid_win(layer); - else if ((osd->vpbe_type == VPBE_VERSION_3) || - (osd->vpbe_type == VPBE_VERSION_2)) - bad_config = !is_osd_win(layer); - break; - case PIXFMT_NV12: - if (osd->vpbe_type != VPBE_VERSION_2) - bad_config = 1; - else - bad_config = is_osd_win(layer); - break; - case PIXFMT_OSD_ATTR: - bad_config = (layer != WIN_OSD1); - break; - default: - bad_config = 1; - break; - } - if (bad_config) { - /* - * The requested pixel format is incompatible with the layer, - * so keep the current layer configuration. - */ - *lconfig = win->lconfig; - return bad_config; - } - - /* DM6446: */ - /* only one OSD window at a time can use RGB pixel formats */ - if ((osd->vpbe_type == VPBE_VERSION_1) && - is_osd_win(layer) && is_rgb_pixfmt(lconfig->pixfmt)) { - enum osd_pix_format pixfmt; - - if (layer == WIN_OSD0) - pixfmt = osd->win[WIN_OSD1].lconfig.pixfmt; - else - pixfmt = osd->win[WIN_OSD0].lconfig.pixfmt; - - if (is_rgb_pixfmt(pixfmt)) { - /* - * The other OSD window is already configured for an - * RGB, so keep the current layer configuration. - */ - *lconfig = win->lconfig; - return 1; - } - } - - /* DM6446: only one video window at a time can use RGB888 */ - if ((osd->vpbe_type == VPBE_VERSION_1) && is_vid_win(layer) && - lconfig->pixfmt == PIXFMT_RGB888) { - enum osd_pix_format pixfmt; - - if (layer == WIN_VID0) - pixfmt = osd->win[WIN_VID1].lconfig.pixfmt; - else - pixfmt = osd->win[WIN_VID0].lconfig.pixfmt; - - if (pixfmt == PIXFMT_RGB888) { - /* - * The other video window is already configured for - * RGB888, so keep the current layer configuration. - */ - *lconfig = win->lconfig; - return 1; - } - } - - /* window dimensions must be non-zero */ - if (!lconfig->line_length || !lconfig->xsize || !lconfig->ysize) { - *lconfig = win->lconfig; - return 1; - } - - /* round line_length up to a multiple of 32 */ - lconfig->line_length = ((lconfig->line_length + 31) / 32) * 32; - lconfig->line_length = - min(lconfig->line_length, (unsigned)MAX_LINE_LENGTH); - lconfig->xsize = min(lconfig->xsize, (unsigned)MAX_WIN_SIZE); - lconfig->ysize = min(lconfig->ysize, (unsigned)MAX_WIN_SIZE); - lconfig->xpos = min(lconfig->xpos, (unsigned)MAX_WIN_SIZE); - lconfig->ypos = min(lconfig->ypos, (unsigned)MAX_WIN_SIZE); - lconfig->interlaced = (lconfig->interlaced != 0); - if (lconfig->interlaced) { - /* ysize and ypos must be even for interlaced displays */ - lconfig->ysize &= ~1; - lconfig->ypos &= ~1; - } - - return 0; -} - -static void _osd_disable_vid_rgb888(struct osd_state *sd) -{ - /* - * The DM6446 supports RGB888 pixel format in a single video window. - * This routine disables RGB888 pixel format for both video windows. - * The caller must ensure that neither video window is currently - * configured for RGB888 pixel format. - */ - if (sd->vpbe_type == VPBE_VERSION_1) - osd_clear(sd, OSD_MISCCTL_RGBEN, OSD_MISCCTL); -} - -static void _osd_enable_vid_rgb888(struct osd_state *sd, - enum osd_layer layer) -{ - /* - * The DM6446 supports RGB888 pixel format in a single video window. - * This routine enables RGB888 pixel format for the specified video - * window. The caller must ensure that the other video window is not - * currently configured for RGB888 pixel format, as this routine will - * disable RGB888 pixel format for the other window. - */ - if (sd->vpbe_type == VPBE_VERSION_1) { - if (layer == WIN_VID0) - osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, - OSD_MISCCTL_RGBEN, OSD_MISCCTL); - else if (layer == WIN_VID1) - osd_modify(sd, OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, - OSD_MISCCTL_RGBEN | OSD_MISCCTL_RGBWIN, - OSD_MISCCTL); - } -} - -static void _osd_set_cbcr_order(struct osd_state *sd, - enum osd_pix_format pixfmt) -{ - /* - * The caller must ensure that all windows using YC pixfmt use the same - * Cb/Cr order. - */ - if (pixfmt == PIXFMT_YCBCRI) - osd_clear(sd, OSD_MODE_CS, OSD_MODE); - else if (pixfmt == PIXFMT_YCRCBI) - osd_set(sd, OSD_MODE_CS, OSD_MODE); -} - -static void _osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, - const struct osd_layer_config *lconfig) -{ - u32 winmd = 0, winmd_mask = 0, bmw = 0; - - _osd_set_cbcr_order(sd, lconfig->pixfmt); - - switch (layer) { - case WIN_OSD0: - if (sd->vpbe_type == VPBE_VERSION_1) { - winmd_mask |= OSD_OSDWIN0MD_RGB0E; - if (lconfig->pixfmt == PIXFMT_RGB565) - winmd |= OSD_OSDWIN0MD_RGB0E; - } else if ((sd->vpbe_type == VPBE_VERSION_3) || - (sd->vpbe_type == VPBE_VERSION_2)) { - winmd_mask |= OSD_OSDWIN0MD_BMP0MD; - switch (lconfig->pixfmt) { - case PIXFMT_RGB565: - winmd |= (1 << - OSD_OSDWIN0MD_BMP0MD_SHIFT); - break; - case PIXFMT_RGB888: - winmd |= (2 << OSD_OSDWIN0MD_BMP0MD_SHIFT); - _osd_enable_rgb888_pixblend(sd, OSDWIN_OSD0); - break; - case PIXFMT_YCBCRI: - case PIXFMT_YCRCBI: - winmd |= (3 << OSD_OSDWIN0MD_BMP0MD_SHIFT); - break; - default: - break; - } - } - - winmd_mask |= OSD_OSDWIN0MD_BMW0 | OSD_OSDWIN0MD_OFF0; - - switch (lconfig->pixfmt) { - case PIXFMT_1BPP: - bmw = 0; - break; - case PIXFMT_2BPP: - bmw = 1; - break; - case PIXFMT_4BPP: - bmw = 2; - break; - case PIXFMT_8BPP: - bmw = 3; - break; - default: - break; - } - winmd |= (bmw << OSD_OSDWIN0MD_BMW0_SHIFT); - - if (lconfig->interlaced) - winmd |= OSD_OSDWIN0MD_OFF0; - - osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN0MD); - osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN0OFST); - osd_write(sd, lconfig->xpos, OSD_OSDWIN0XP); - osd_write(sd, lconfig->xsize, OSD_OSDWIN0XL); - if (lconfig->interlaced) { - osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN0YP); - osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN0YL); - } else { - osd_write(sd, lconfig->ypos, OSD_OSDWIN0YP); - osd_write(sd, lconfig->ysize, OSD_OSDWIN0YL); - } - break; - case WIN_VID0: - winmd_mask |= OSD_VIDWINMD_VFF0; - if (lconfig->interlaced) - winmd |= OSD_VIDWINMD_VFF0; - - osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); - osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN0OFST); - osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); - osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); - /* - * For YUV420P format the register contents are - * duplicated in both VID registers - */ - if ((sd->vpbe_type == VPBE_VERSION_2) && - (lconfig->pixfmt == PIXFMT_NV12)) { - /* other window also */ - if (lconfig->interlaced) { - winmd_mask |= OSD_VIDWINMD_VFF1; - winmd |= OSD_VIDWINMD_VFF1; - osd_modify(sd, winmd_mask, winmd, - OSD_VIDWINMD); - } - - osd_modify(sd, OSD_MISCCTL_S420D, - OSD_MISCCTL_S420D, OSD_MISCCTL); - osd_write(sd, lconfig->line_length >> 5, - OSD_VIDWIN1OFST); - osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); - osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); - /* - * if NV21 pixfmt and line length not 32B - * aligned (e.g. NTSC), Need to set window - * X pixel size to be 32B aligned as well - */ - if (lconfig->xsize % 32) { - osd_write(sd, - ((lconfig->xsize + 31) & ~31), - OSD_VIDWIN1XL); - osd_write(sd, - ((lconfig->xsize + 31) & ~31), - OSD_VIDWIN0XL); - } - } else if ((sd->vpbe_type == VPBE_VERSION_2) && - (lconfig->pixfmt != PIXFMT_NV12)) { - osd_modify(sd, OSD_MISCCTL_S420D, ~OSD_MISCCTL_S420D, - OSD_MISCCTL); - } - - if (lconfig->interlaced) { - osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN0YP); - osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN0YL); - if ((sd->vpbe_type == VPBE_VERSION_2) && - lconfig->pixfmt == PIXFMT_NV12) { - osd_write(sd, lconfig->ypos >> 1, - OSD_VIDWIN1YP); - osd_write(sd, lconfig->ysize >> 1, - OSD_VIDWIN1YL); - } - } else { - osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); - osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); - if ((sd->vpbe_type == VPBE_VERSION_2) && - lconfig->pixfmt == PIXFMT_NV12) { - osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); - osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); - } - } - break; - case WIN_OSD1: - /* - * The caller must ensure that OSD1 is disabled prior to - * switching from a normal mode to attribute mode or from - * attribute mode to a normal mode. - */ - if (lconfig->pixfmt == PIXFMT_OSD_ATTR) { - if (sd->vpbe_type == VPBE_VERSION_1) { - winmd_mask |= OSD_OSDWIN1MD_ATN1E | - OSD_OSDWIN1MD_RGB1E | OSD_OSDWIN1MD_CLUTS1 | - OSD_OSDWIN1MD_BLND1 | OSD_OSDWIN1MD_TE1; - } else { - winmd_mask |= OSD_OSDWIN1MD_BMP1MD | - OSD_OSDWIN1MD_CLUTS1 | OSD_OSDWIN1MD_BLND1 | - OSD_OSDWIN1MD_TE1; - } - } else { - if (sd->vpbe_type == VPBE_VERSION_1) { - winmd_mask |= OSD_OSDWIN1MD_RGB1E; - if (lconfig->pixfmt == PIXFMT_RGB565) - winmd |= OSD_OSDWIN1MD_RGB1E; - } else if ((sd->vpbe_type == VPBE_VERSION_3) - || (sd->vpbe_type == VPBE_VERSION_2)) { - winmd_mask |= OSD_OSDWIN1MD_BMP1MD; - switch (lconfig->pixfmt) { - case PIXFMT_RGB565: - winmd |= - (1 << OSD_OSDWIN1MD_BMP1MD_SHIFT); - break; - case PIXFMT_RGB888: - winmd |= - (2 << OSD_OSDWIN1MD_BMP1MD_SHIFT); - _osd_enable_rgb888_pixblend(sd, - OSDWIN_OSD1); - break; - case PIXFMT_YCBCRI: - case PIXFMT_YCRCBI: - winmd |= - (3 << OSD_OSDWIN1MD_BMP1MD_SHIFT); - break; - default: - break; - } - } - - winmd_mask |= OSD_OSDWIN1MD_BMW1; - switch (lconfig->pixfmt) { - case PIXFMT_1BPP: - bmw = 0; - break; - case PIXFMT_2BPP: - bmw = 1; - break; - case PIXFMT_4BPP: - bmw = 2; - break; - case PIXFMT_8BPP: - bmw = 3; - break; - default: - break; - } - winmd |= (bmw << OSD_OSDWIN1MD_BMW1_SHIFT); - } - - winmd_mask |= OSD_OSDWIN1MD_OFF1; - if (lconfig->interlaced) - winmd |= OSD_OSDWIN1MD_OFF1; - - osd_modify(sd, winmd_mask, winmd, OSD_OSDWIN1MD); - osd_write(sd, lconfig->line_length >> 5, OSD_OSDWIN1OFST); - osd_write(sd, lconfig->xpos, OSD_OSDWIN1XP); - osd_write(sd, lconfig->xsize, OSD_OSDWIN1XL); - if (lconfig->interlaced) { - osd_write(sd, lconfig->ypos >> 1, OSD_OSDWIN1YP); - osd_write(sd, lconfig->ysize >> 1, OSD_OSDWIN1YL); - } else { - osd_write(sd, lconfig->ypos, OSD_OSDWIN1YP); - osd_write(sd, lconfig->ysize, OSD_OSDWIN1YL); - } - break; - case WIN_VID1: - winmd_mask |= OSD_VIDWINMD_VFF1; - if (lconfig->interlaced) - winmd |= OSD_VIDWINMD_VFF1; - - osd_modify(sd, winmd_mask, winmd, OSD_VIDWINMD); - osd_write(sd, lconfig->line_length >> 5, OSD_VIDWIN1OFST); - osd_write(sd, lconfig->xpos, OSD_VIDWIN1XP); - osd_write(sd, lconfig->xsize, OSD_VIDWIN1XL); - /* - * For YUV420P format the register contents are - * duplicated in both VID registers - */ - if (sd->vpbe_type == VPBE_VERSION_2) { - if (lconfig->pixfmt == PIXFMT_NV12) { - /* other window also */ - if (lconfig->interlaced) { - winmd_mask |= OSD_VIDWINMD_VFF0; - winmd |= OSD_VIDWINMD_VFF0; - osd_modify(sd, winmd_mask, winmd, - OSD_VIDWINMD); - } - osd_modify(sd, OSD_MISCCTL_S420D, - OSD_MISCCTL_S420D, OSD_MISCCTL); - osd_write(sd, lconfig->line_length >> 5, - OSD_VIDWIN0OFST); - osd_write(sd, lconfig->xpos, OSD_VIDWIN0XP); - osd_write(sd, lconfig->xsize, OSD_VIDWIN0XL); - } else { - osd_modify(sd, OSD_MISCCTL_S420D, - ~OSD_MISCCTL_S420D, OSD_MISCCTL); - } - } - - if (lconfig->interlaced) { - osd_write(sd, lconfig->ypos >> 1, OSD_VIDWIN1YP); - osd_write(sd, lconfig->ysize >> 1, OSD_VIDWIN1YL); - if ((sd->vpbe_type == VPBE_VERSION_2) && - lconfig->pixfmt == PIXFMT_NV12) { - osd_write(sd, lconfig->ypos >> 1, - OSD_VIDWIN0YP); - osd_write(sd, lconfig->ysize >> 1, - OSD_VIDWIN0YL); - } - } else { - osd_write(sd, lconfig->ypos, OSD_VIDWIN1YP); - osd_write(sd, lconfig->ysize, OSD_VIDWIN1YL); - if ((sd->vpbe_type == VPBE_VERSION_2) && - lconfig->pixfmt == PIXFMT_NV12) { - osd_write(sd, lconfig->ypos, OSD_VIDWIN0YP); - osd_write(sd, lconfig->ysize, OSD_VIDWIN0YL); - } - } - break; - } -} - -static int osd_set_layer_config(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - struct osd_layer_config *cfg = &win->lconfig; - unsigned long flags; - int reject_config; - - spin_lock_irqsave(&osd->lock, flags); - - reject_config = try_layer_config(sd, layer, lconfig); - if (reject_config) { - spin_unlock_irqrestore(&osd->lock, flags); - return reject_config; - } - - /* update the current Cb/Cr order */ - if (is_yc_pixfmt(lconfig->pixfmt)) - osd->yc_pixfmt = lconfig->pixfmt; - - /* - * If we are switching OSD1 from normal mode to attribute mode or from - * attribute mode to normal mode, then we must disable the window. - */ - if (layer == WIN_OSD1) { - if (((lconfig->pixfmt == PIXFMT_OSD_ATTR) && - (cfg->pixfmt != PIXFMT_OSD_ATTR)) || - ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && - (cfg->pixfmt == PIXFMT_OSD_ATTR))) { - win->is_enabled = 0; - _osd_disable_layer(sd, layer); - } - } - - _osd_set_layer_config(sd, layer, lconfig); - - if (layer == WIN_OSD1) { - struct osd_osdwin_state *osdwin_state = - &osd->osdwin[OSDWIN_OSD1]; - - if ((lconfig->pixfmt != PIXFMT_OSD_ATTR) && - (cfg->pixfmt == PIXFMT_OSD_ATTR)) { - /* - * We just switched OSD1 from attribute mode to normal - * mode, so we must initialize the CLUT select, the - * blend factor, transparency colorkey enable, and - * attenuation enable (DM6446 only) bits in the - * OSDWIN1MD register. - */ - _osd_set_osd_clut(sd, OSDWIN_OSD1, - osdwin_state->clut); - _osd_set_blending_factor(sd, OSDWIN_OSD1, - osdwin_state->blend); - if (osdwin_state->colorkey_blending) { - _osd_enable_color_key(sd, OSDWIN_OSD1, - osdwin_state-> - colorkey, - lconfig->pixfmt); - } else - _osd_disable_color_key(sd, OSDWIN_OSD1); - _osd_set_rec601_attenuation(sd, OSDWIN_OSD1, - osdwin_state-> - rec601_attenuation); - } else if ((lconfig->pixfmt == PIXFMT_OSD_ATTR) && - (cfg->pixfmt != PIXFMT_OSD_ATTR)) { - /* - * We just switched OSD1 from normal mode to attribute - * mode, so we must initialize the blink enable and - * blink interval bits in the OSDATRMD register. - */ - _osd_set_blink_attribute(sd, osd->is_blinking, - osd->blink); - } - } - - /* - * If we just switched to a 1-, 2-, or 4-bits-per-pixel bitmap format - * then configure a default palette map. - */ - if ((lconfig->pixfmt != cfg->pixfmt) && - ((lconfig->pixfmt == PIXFMT_1BPP) || - (lconfig->pixfmt == PIXFMT_2BPP) || - (lconfig->pixfmt == PIXFMT_4BPP))) { - enum osd_win_layer osdwin = - ((layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1); - struct osd_osdwin_state *osdwin_state = - &osd->osdwin[osdwin]; - unsigned char clut_index; - unsigned char clut_entries = 0; - - switch (lconfig->pixfmt) { - case PIXFMT_1BPP: - clut_entries = 2; - break; - case PIXFMT_2BPP: - clut_entries = 4; - break; - case PIXFMT_4BPP: - clut_entries = 16; - break; - default: - break; - } - /* - * The default palette map maps the pixel value to the clut - * index, i.e. pixel value 0 maps to clut entry 0, pixel value - * 1 maps to clut entry 1, etc. - */ - for (clut_index = 0; clut_index < 16; clut_index++) { - osdwin_state->palette_map[clut_index] = clut_index; - if (clut_index < clut_entries) { - _osd_set_palette_map(sd, osdwin, clut_index, - clut_index, - lconfig->pixfmt); - } - } - } - - *cfg = *lconfig; - /* DM6446: configure the RGB888 enable and window selection */ - if (osd->win[WIN_VID0].lconfig.pixfmt == PIXFMT_RGB888) - _osd_enable_vid_rgb888(sd, WIN_VID0); - else if (osd->win[WIN_VID1].lconfig.pixfmt == PIXFMT_RGB888) - _osd_enable_vid_rgb888(sd, WIN_VID1); - else - _osd_disable_vid_rgb888(sd); - - if (layer == WIN_VID0) { - osd->pingpong = - _osd_dm6446_vid0_pingpong(sd, osd->field_inversion, - win->fb_base_phys, - cfg); - } - - spin_unlock_irqrestore(&osd->lock, flags); - - return 0; -} - -static void osd_init_layer(struct osd_state *sd, enum osd_layer layer) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - enum osd_win_layer osdwin; - struct osd_osdwin_state *osdwin_state; - struct osd_layer_config *cfg = &win->lconfig; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - win->is_enabled = 0; - _osd_disable_layer(sd, layer); - - win->h_zoom = ZOOM_X1; - win->v_zoom = ZOOM_X1; - _osd_set_zoom(sd, layer, win->h_zoom, win->v_zoom); - - win->fb_base_phys = 0; - _osd_start_layer(sd, layer, win->fb_base_phys, 0); - - cfg->line_length = 0; - cfg->xsize = 0; - cfg->ysize = 0; - cfg->xpos = 0; - cfg->ypos = 0; - cfg->interlaced = 0; - switch (layer) { - case WIN_OSD0: - case WIN_OSD1: - osdwin = (layer == WIN_OSD0) ? OSDWIN_OSD0 : OSDWIN_OSD1; - osdwin_state = &osd->osdwin[osdwin]; - /* - * Other code relies on the fact that OSD windows default to a - * bitmap pixel format when they are deallocated, so don't - * change this default pixel format. - */ - cfg->pixfmt = PIXFMT_8BPP; - _osd_set_layer_config(sd, layer, cfg); - osdwin_state->clut = RAM_CLUT; - _osd_set_osd_clut(sd, osdwin, osdwin_state->clut); - osdwin_state->colorkey_blending = 0; - _osd_disable_color_key(sd, osdwin); - osdwin_state->blend = OSD_8_VID_0; - _osd_set_blending_factor(sd, osdwin, osdwin_state->blend); - osdwin_state->rec601_attenuation = 0; - _osd_set_rec601_attenuation(sd, osdwin, - osdwin_state-> - rec601_attenuation); - if (osdwin == OSDWIN_OSD1) { - osd->is_blinking = 0; - osd->blink = BLINK_X1; - } - break; - case WIN_VID0: - case WIN_VID1: - cfg->pixfmt = osd->yc_pixfmt; - _osd_set_layer_config(sd, layer, cfg); - break; - } - - spin_unlock_irqrestore(&osd->lock, flags); -} - -static void osd_release_layer(struct osd_state *sd, enum osd_layer layer) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - if (!win->is_allocated) { - spin_unlock_irqrestore(&osd->lock, flags); - return; - } - - spin_unlock_irqrestore(&osd->lock, flags); - osd_init_layer(sd, layer); - spin_lock_irqsave(&osd->lock, flags); - - win->is_allocated = 0; - - spin_unlock_irqrestore(&osd->lock, flags); -} - -static int osd_request_layer(struct osd_state *sd, enum osd_layer layer) -{ - struct osd_state *osd = sd; - struct osd_window_state *win = &osd->win[layer]; - unsigned long flags; - - spin_lock_irqsave(&osd->lock, flags); - - if (win->is_allocated) { - spin_unlock_irqrestore(&osd->lock, flags); - return -1; - } - win->is_allocated = 1; - - spin_unlock_irqrestore(&osd->lock, flags); - - return 0; -} - -static void _osd_init(struct osd_state *sd) -{ - osd_write(sd, 0, OSD_MODE); - osd_write(sd, 0, OSD_VIDWINMD); - osd_write(sd, 0, OSD_OSDWIN0MD); - osd_write(sd, 0, OSD_OSDWIN1MD); - osd_write(sd, 0, OSD_RECTCUR); - osd_write(sd, 0, OSD_MISCCTL); - if (sd->vpbe_type == VPBE_VERSION_3) { - osd_write(sd, 0, OSD_VBNDRY); - osd_write(sd, 0, OSD_EXTMODE); - osd_write(sd, OSD_MISCCTL_DMANG, OSD_MISCCTL); - } -} - -static void osd_set_left_margin(struct osd_state *sd, u32 val) -{ - osd_write(sd, val, OSD_BASEPX); -} - -static void osd_set_top_margin(struct osd_state *sd, u32 val) -{ - osd_write(sd, val, OSD_BASEPY); -} - -static int osd_initialize(struct osd_state *osd) -{ - if (osd == NULL) - return -ENODEV; - _osd_init(osd); - - /* set default Cb/Cr order */ - osd->yc_pixfmt = PIXFMT_YCBCRI; - - if (osd->vpbe_type == VPBE_VERSION_3) { - /* - * ROM CLUT1 on the DM355 is similar (identical?) to ROM CLUT0 - * on the DM6446, so make ROM_CLUT1 the default on the DM355. - */ - osd->rom_clut = ROM_CLUT1; - } - - _osd_set_field_inversion(osd, osd->field_inversion); - _osd_set_rom_clut(osd, osd->rom_clut); - - osd_init_layer(osd, WIN_OSD0); - osd_init_layer(osd, WIN_VID0); - osd_init_layer(osd, WIN_OSD1); - osd_init_layer(osd, WIN_VID1); - - return 0; -} - -static const struct vpbe_osd_ops osd_ops = { - .initialize = osd_initialize, - .request_layer = osd_request_layer, - .release_layer = osd_release_layer, - .enable_layer = osd_enable_layer, - .disable_layer = osd_disable_layer, - .set_layer_config = osd_set_layer_config, - .get_layer_config = osd_get_layer_config, - .start_layer = osd_start_layer, - .set_left_margin = osd_set_left_margin, - .set_top_margin = osd_set_top_margin, -}; - -static int osd_probe(struct platform_device *pdev) -{ - const struct platform_device_id *pdev_id; - struct osd_state *osd; - struct resource *res; - - pdev_id = platform_get_device_id(pdev); - if (!pdev_id) - return -EINVAL; - - osd = devm_kzalloc(&pdev->dev, sizeof(struct osd_state), GFP_KERNEL); - if (osd == NULL) - return -ENOMEM; - - - osd->dev = &pdev->dev; - osd->vpbe_type = pdev_id->driver_data; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - osd->osd_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(osd->osd_base)) - return PTR_ERR(osd->osd_base); - - osd->osd_base_phys = res->start; - osd->osd_size = resource_size(res); - spin_lock_init(&osd->lock); - osd->ops = osd_ops; - platform_set_drvdata(pdev, osd); - dev_notice(osd->dev, "OSD sub device probe success\n"); - - return 0; -} - -static int osd_remove(struct platform_device *pdev) -{ - return 0; -} - -static struct platform_driver osd_driver = { - .probe = osd_probe, - .remove = osd_remove, - .driver = { - .name = MODULE_NAME, - }, - .id_table = vpbe_osd_devtype -}; - -module_platform_driver(osd_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("DaVinci OSD Manager Driver"); -MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/ti/davinci/vpbe_osd_regs.h b/drivers/media/platform/ti/davinci/vpbe_osd_regs.h deleted file mode 100644 index cecd5991d4c5..000000000000 --- a/drivers/media/platform/ti/davinci/vpbe_osd_regs.h +++ /dev/null @@ -1,352 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006-2010 Texas Instruments Inc - */ -#ifndef _VPBE_OSD_REGS_H -#define _VPBE_OSD_REGS_H - -/* VPBE Global Registers */ -#define VPBE_PID 0x0 -#define VPBE_PCR 0x4 - -/* VPSS CLock Registers */ -#define VPSSCLK_PID 0x00 -#define VPSSCLK_CLKCTRL 0x04 - -/* VPSS Buffer Logic Registers */ -#define VPSSBL_PID 0x00 -#define VPSSBL_PCR 0x04 -#define VPSSBL_BCR 0x08 -#define VPSSBL_INTSTAT 0x0C -#define VPSSBL_INTSEL 0x10 -#define VPSSBL_EVTSEL 0x14 -#define VPSSBL_MEMCTRL 0x18 -#define VPSSBL_CCDCMUX 0x1C - -/* DM365 ISP5 system configuration */ -#define ISP5_PID 0x0 -#define ISP5_PCCR 0x4 -#define ISP5_BCR 0x8 -#define ISP5_INTSTAT 0xC -#define ISP5_INTSEL1 0x10 -#define ISP5_INTSEL2 0x14 -#define ISP5_INTSEL3 0x18 -#define ISP5_EVTSEL 0x1c -#define ISP5_CCDCMUX 0x20 - -/* VPBE On-Screen Display Subsystem Registers (OSD) */ -#define OSD_MODE 0x00 -#define OSD_VIDWINMD 0x04 -#define OSD_OSDWIN0MD 0x08 -#define OSD_OSDWIN1MD 0x0C -#define OSD_OSDATRMD 0x0C -#define OSD_RECTCUR 0x10 -#define OSD_VIDWIN0OFST 0x18 -#define OSD_VIDWIN1OFST 0x1C -#define OSD_OSDWIN0OFST 0x20 -#define OSD_OSDWIN1OFST 0x24 -#define OSD_VIDWINADH 0x28 -#define OSD_VIDWIN0ADL 0x2C -#define OSD_VIDWIN0ADR 0x2C -#define OSD_VIDWIN1ADL 0x30 -#define OSD_VIDWIN1ADR 0x30 -#define OSD_OSDWINADH 0x34 -#define OSD_OSDWIN0ADL 0x38 -#define OSD_OSDWIN0ADR 0x38 -#define OSD_OSDWIN1ADL 0x3C -#define OSD_OSDWIN1ADR 0x3C -#define OSD_BASEPX 0x40 -#define OSD_BASEPY 0x44 -#define OSD_VIDWIN0XP 0x48 -#define OSD_VIDWIN0YP 0x4C -#define OSD_VIDWIN0XL 0x50 -#define OSD_VIDWIN0YL 0x54 -#define OSD_VIDWIN1XP 0x58 -#define OSD_VIDWIN1YP 0x5C -#define OSD_VIDWIN1XL 0x60 -#define OSD_VIDWIN1YL 0x64 -#define OSD_OSDWIN0XP 0x68 -#define OSD_OSDWIN0YP 0x6C -#define OSD_OSDWIN0XL 0x70 -#define OSD_OSDWIN0YL 0x74 -#define OSD_OSDWIN1XP 0x78 -#define OSD_OSDWIN1YP 0x7C -#define OSD_OSDWIN1XL 0x80 -#define OSD_OSDWIN1YL 0x84 -#define OSD_CURXP 0x88 -#define OSD_CURYP 0x8C -#define OSD_CURXL 0x90 -#define OSD_CURYL 0x94 -#define OSD_W0BMP01 0xA0 -#define OSD_W0BMP23 0xA4 -#define OSD_W0BMP45 0xA8 -#define OSD_W0BMP67 0xAC -#define OSD_W0BMP89 0xB0 -#define OSD_W0BMPAB 0xB4 -#define OSD_W0BMPCD 0xB8 -#define OSD_W0BMPEF 0xBC -#define OSD_W1BMP01 0xC0 -#define OSD_W1BMP23 0xC4 -#define OSD_W1BMP45 0xC8 -#define OSD_W1BMP67 0xCC -#define OSD_W1BMP89 0xD0 -#define OSD_W1BMPAB 0xD4 -#define OSD_W1BMPCD 0xD8 -#define OSD_W1BMPEF 0xDC -#define OSD_VBNDRY 0xE0 -#define OSD_EXTMODE 0xE4 -#define OSD_MISCCTL 0xE8 -#define OSD_CLUTRAMYCB 0xEC -#define OSD_CLUTRAMCR 0xF0 -#define OSD_TRANSPVAL 0xF4 -#define OSD_TRANSPVALL 0xF4 -#define OSD_TRANSPVALU 0xF8 -#define OSD_TRANSPBMPIDX 0xFC -#define OSD_PPVWIN0ADR 0xFC - -/* bit definitions */ -#define VPBE_PCR_VENC_DIV (1 << 1) -#define VPBE_PCR_CLK_OFF (1 << 0) - -#define VPSSBL_INTSTAT_HSSIINT (1 << 14) -#define VPSSBL_INTSTAT_CFALDINT (1 << 13) -#define VPSSBL_INTSTAT_IPIPE_INT5 (1 << 12) -#define VPSSBL_INTSTAT_IPIPE_INT4 (1 << 11) -#define VPSSBL_INTSTAT_IPIPE_INT3 (1 << 10) -#define VPSSBL_INTSTAT_IPIPE_INT2 (1 << 9) -#define VPSSBL_INTSTAT_IPIPE_INT1 (1 << 8) -#define VPSSBL_INTSTAT_IPIPE_INT0 (1 << 7) -#define VPSSBL_INTSTAT_IPIPEIFINT (1 << 6) -#define VPSSBL_INTSTAT_OSDINT (1 << 5) -#define VPSSBL_INTSTAT_VENCINT (1 << 4) -#define VPSSBL_INTSTAT_H3AINT (1 << 3) -#define VPSSBL_INTSTAT_CCDC_VDINT2 (1 << 2) -#define VPSSBL_INTSTAT_CCDC_VDINT1 (1 << 1) -#define VPSSBL_INTSTAT_CCDC_VDINT0 (1 << 0) - -/* DM365 ISP5 bit definitions */ -#define ISP5_INTSTAT_VENCINT (1 << 21) -#define ISP5_INTSTAT_OSDINT (1 << 20) - -/* VMOD TVTYP options for HDMD=0 */ -#define SDTV_NTSC 0 -#define SDTV_PAL 1 -/* VMOD TVTYP options for HDMD=1 */ -#define HDTV_525P 0 -#define HDTV_625P 1 -#define HDTV_1080I 2 -#define HDTV_720P 3 - -#define OSD_MODE_CS (1 << 15) -#define OSD_MODE_OVRSZ (1 << 14) -#define OSD_MODE_OHRSZ (1 << 13) -#define OSD_MODE_EF (1 << 12) -#define OSD_MODE_VVRSZ (1 << 11) -#define OSD_MODE_VHRSZ (1 << 10) -#define OSD_MODE_FSINV (1 << 9) -#define OSD_MODE_BCLUT (1 << 8) -#define OSD_MODE_CABG_SHIFT 0 -#define OSD_MODE_CABG (0xff << 0) - -#define OSD_VIDWINMD_VFINV (1 << 15) -#define OSD_VIDWINMD_V1EFC (1 << 14) -#define OSD_VIDWINMD_VHZ1_SHIFT 12 -#define OSD_VIDWINMD_VHZ1 (3 << 12) -#define OSD_VIDWINMD_VVZ1_SHIFT 10 -#define OSD_VIDWINMD_VVZ1 (3 << 10) -#define OSD_VIDWINMD_VFF1 (1 << 9) -#define OSD_VIDWINMD_ACT1 (1 << 8) -#define OSD_VIDWINMD_V0EFC (1 << 6) -#define OSD_VIDWINMD_VHZ0_SHIFT 4 -#define OSD_VIDWINMD_VHZ0 (3 << 4) -#define OSD_VIDWINMD_VVZ0_SHIFT 2 -#define OSD_VIDWINMD_VVZ0 (3 << 2) -#define OSD_VIDWINMD_VFF0 (1 << 1) -#define OSD_VIDWINMD_ACT0 (1 << 0) - -#define OSD_OSDWIN0MD_ATN0E (1 << 14) -#define OSD_OSDWIN0MD_RGB0E (1 << 13) -#define OSD_OSDWIN0MD_BMP0MD_SHIFT 13 -#define OSD_OSDWIN0MD_BMP0MD (3 << 13) -#define OSD_OSDWIN0MD_CLUTS0 (1 << 12) -#define OSD_OSDWIN0MD_OHZ0_SHIFT 10 -#define OSD_OSDWIN0MD_OHZ0 (3 << 10) -#define OSD_OSDWIN0MD_OVZ0_SHIFT 8 -#define OSD_OSDWIN0MD_OVZ0 (3 << 8) -#define OSD_OSDWIN0MD_BMW0_SHIFT 6 -#define OSD_OSDWIN0MD_BMW0 (3 << 6) -#define OSD_OSDWIN0MD_BLND0_SHIFT 3 -#define OSD_OSDWIN0MD_BLND0 (7 << 3) -#define OSD_OSDWIN0MD_TE0 (1 << 2) -#define OSD_OSDWIN0MD_OFF0 (1 << 1) -#define OSD_OSDWIN0MD_OACT0 (1 << 0) - -#define OSD_OSDWIN1MD_OASW (1 << 15) -#define OSD_OSDWIN1MD_ATN1E (1 << 14) -#define OSD_OSDWIN1MD_RGB1E (1 << 13) -#define OSD_OSDWIN1MD_BMP1MD_SHIFT 13 -#define OSD_OSDWIN1MD_BMP1MD (3 << 13) -#define OSD_OSDWIN1MD_CLUTS1 (1 << 12) -#define OSD_OSDWIN1MD_OHZ1_SHIFT 10 -#define OSD_OSDWIN1MD_OHZ1 (3 << 10) -#define OSD_OSDWIN1MD_OVZ1_SHIFT 8 -#define OSD_OSDWIN1MD_OVZ1 (3 << 8) -#define OSD_OSDWIN1MD_BMW1_SHIFT 6 -#define OSD_OSDWIN1MD_BMW1 (3 << 6) -#define OSD_OSDWIN1MD_BLND1_SHIFT 3 -#define OSD_OSDWIN1MD_BLND1 (7 << 3) -#define OSD_OSDWIN1MD_TE1 (1 << 2) -#define OSD_OSDWIN1MD_OFF1 (1 << 1) -#define OSD_OSDWIN1MD_OACT1 (1 << 0) - -#define OSD_OSDATRMD_OASW (1 << 15) -#define OSD_OSDATRMD_OHZA_SHIFT 10 -#define OSD_OSDATRMD_OHZA (3 << 10) -#define OSD_OSDATRMD_OVZA_SHIFT 8 -#define OSD_OSDATRMD_OVZA (3 << 8) -#define OSD_OSDATRMD_BLNKINT_SHIFT 6 -#define OSD_OSDATRMD_BLNKINT (3 << 6) -#define OSD_OSDATRMD_OFFA (1 << 1) -#define OSD_OSDATRMD_BLNK (1 << 0) - -#define OSD_RECTCUR_RCAD_SHIFT 8 -#define OSD_RECTCUR_RCAD (0xff << 8) -#define OSD_RECTCUR_CLUTSR (1 << 7) -#define OSD_RECTCUR_RCHW_SHIFT 4 -#define OSD_RECTCUR_RCHW (7 << 4) -#define OSD_RECTCUR_RCVW_SHIFT 1 -#define OSD_RECTCUR_RCVW (7 << 1) -#define OSD_RECTCUR_RCACT (1 << 0) - -#define OSD_VIDWIN0OFST_V0LO (0x1ff << 0) - -#define OSD_VIDWIN1OFST_V1LO (0x1ff << 0) - -#define OSD_OSDWIN0OFST_O0LO (0x1ff << 0) - -#define OSD_OSDWIN1OFST_O1LO (0x1ff << 0) - -#define OSD_WINOFST_AH_SHIFT 9 - -#define OSD_VIDWIN0OFST_V0AH (0xf << 9) -#define OSD_VIDWIN1OFST_V1AH (0xf << 9) -#define OSD_OSDWIN0OFST_O0AH (0xf << 9) -#define OSD_OSDWIN1OFST_O1AH (0xf << 9) - -#define OSD_VIDWINADH_V1AH_SHIFT 8 -#define OSD_VIDWINADH_V1AH (0x7f << 8) -#define OSD_VIDWINADH_V0AH_SHIFT 0 -#define OSD_VIDWINADH_V0AH (0x7f << 0) - -#define OSD_VIDWIN0ADL_V0AL (0xffff << 0) - -#define OSD_VIDWIN1ADL_V1AL (0xffff << 0) - -#define OSD_OSDWINADH_O1AH_SHIFT 8 -#define OSD_OSDWINADH_O1AH (0x7f << 8) -#define OSD_OSDWINADH_O0AH_SHIFT 0 -#define OSD_OSDWINADH_O0AH (0x7f << 0) - -#define OSD_OSDWIN0ADL_O0AL (0xffff << 0) - -#define OSD_OSDWIN1ADL_O1AL (0xffff << 0) - -#define OSD_BASEPX_BPX (0x3ff << 0) - -#define OSD_BASEPY_BPY (0x1ff << 0) - -#define OSD_VIDWIN0XP_V0X (0x7ff << 0) - -#define OSD_VIDWIN0YP_V0Y (0x7ff << 0) - -#define OSD_VIDWIN0XL_V0W (0x7ff << 0) - -#define OSD_VIDWIN0YL_V0H (0x7ff << 0) - -#define OSD_VIDWIN1XP_V1X (0x7ff << 0) - -#define OSD_VIDWIN1YP_V1Y (0x7ff << 0) - -#define OSD_VIDWIN1XL_V1W (0x7ff << 0) - -#define OSD_VIDWIN1YL_V1H (0x7ff << 0) - -#define OSD_OSDWIN0XP_W0X (0x7ff << 0) - -#define OSD_OSDWIN0YP_W0Y (0x7ff << 0) - -#define OSD_OSDWIN0XL_W0W (0x7ff << 0) - -#define OSD_OSDWIN0YL_W0H (0x7ff << 0) - -#define OSD_OSDWIN1XP_W1X (0x7ff << 0) - -#define OSD_OSDWIN1YP_W1Y (0x7ff << 0) - -#define OSD_OSDWIN1XL_W1W (0x7ff << 0) - -#define OSD_OSDWIN1YL_W1H (0x7ff << 0) - -#define OSD_CURXP_RCSX (0x7ff << 0) - -#define OSD_CURYP_RCSY (0x7ff << 0) - -#define OSD_CURXL_RCSW (0x7ff << 0) - -#define OSD_CURYL_RCSH (0x7ff << 0) - -#define OSD_EXTMODE_EXPMDSEL (1 << 15) -#define OSD_EXTMODE_SCRNHEXP_SHIFT 13 -#define OSD_EXTMODE_SCRNHEXP (3 << 13) -#define OSD_EXTMODE_SCRNVEXP (1 << 12) -#define OSD_EXTMODE_OSD1BLDCHR (1 << 11) -#define OSD_EXTMODE_OSD0BLDCHR (1 << 10) -#define OSD_EXTMODE_ATNOSD1EN (1 << 9) -#define OSD_EXTMODE_ATNOSD0EN (1 << 8) -#define OSD_EXTMODE_OSDHRSZ15 (1 << 7) -#define OSD_EXTMODE_VIDHRSZ15 (1 << 6) -#define OSD_EXTMODE_ZMFILV1HEN (1 << 5) -#define OSD_EXTMODE_ZMFILV1VEN (1 << 4) -#define OSD_EXTMODE_ZMFILV0HEN (1 << 3) -#define OSD_EXTMODE_ZMFILV0VEN (1 << 2) -#define OSD_EXTMODE_EXPFILHEN (1 << 1) -#define OSD_EXTMODE_EXPFILVEN (1 << 0) - -#define OSD_MISCCTL_BLDSEL (1 << 15) -#define OSD_MISCCTL_S420D (1 << 14) -#define OSD_MISCCTL_BMAPT (1 << 13) -#define OSD_MISCCTL_DM365M (1 << 12) -#define OSD_MISCCTL_RGBEN (1 << 7) -#define OSD_MISCCTL_RGBWIN (1 << 6) -#define OSD_MISCCTL_DMANG (1 << 6) -#define OSD_MISCCTL_TMON (1 << 5) -#define OSD_MISCCTL_RSEL (1 << 4) -#define OSD_MISCCTL_CPBSY (1 << 3) -#define OSD_MISCCTL_PPSW (1 << 2) -#define OSD_MISCCTL_PPRV (1 << 1) - -#define OSD_CLUTRAMYCB_Y_SHIFT 8 -#define OSD_CLUTRAMYCB_Y (0xff << 8) -#define OSD_CLUTRAMYCB_CB_SHIFT 0 -#define OSD_CLUTRAMYCB_CB (0xff << 0) - -#define OSD_CLUTRAMCR_CR_SHIFT 8 -#define OSD_CLUTRAMCR_CR (0xff << 8) -#define OSD_CLUTRAMCR_CADDR_SHIFT 0 -#define OSD_CLUTRAMCR_CADDR (0xff << 0) - -#define OSD_TRANSPVAL_RGBTRANS (0xffff << 0) - -#define OSD_TRANSPVALL_RGBL (0xffff << 0) - -#define OSD_TRANSPVALU_Y_SHIFT 8 -#define OSD_TRANSPVALU_Y (0xff << 8) -#define OSD_TRANSPVALU_RGBU_SHIFT 0 -#define OSD_TRANSPVALU_RGBU (0xff << 0) - -#define OSD_TRANSPBMPIDX_BMP1_SHIFT 8 -#define OSD_TRANSPBMPIDX_BMP1 (0xff << 8) -#define OSD_TRANSPBMPIDX_BMP0_SHIFT 0 -#define OSD_TRANSPBMPIDX_BMP0 0xff - -#endif /* _DAVINCI_VPBE_H_ */ diff --git a/drivers/media/platform/ti/davinci/vpbe_venc.c b/drivers/media/platform/ti/davinci/vpbe_venc.c deleted file mode 100644 index 4c8e31de12b1..000000000000 --- a/drivers/media/platform/ti/davinci/vpbe_venc.c +++ /dev/null @@ -1,676 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include - -#include - -#include -#include -#include -#include - -#include "vpbe_venc_regs.h" - -#define MODULE_NAME "davinci-vpbe-venc" - -static const struct platform_device_id vpbe_venc_devtype[] = { - { - .name = DM644X_VPBE_VENC_SUBDEV_NAME, - .driver_data = VPBE_VERSION_1, - }, { - .name = DM365_VPBE_VENC_SUBDEV_NAME, - .driver_data = VPBE_VERSION_2, - }, { - .name = DM355_VPBE_VENC_SUBDEV_NAME, - .driver_data = VPBE_VERSION_3, - }, - { - /* sentinel */ - } -}; - -MODULE_DEVICE_TABLE(platform, vpbe_venc_devtype); - -static int debug = 2; -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Debug level 0-2"); - -struct venc_state { - struct v4l2_subdev sd; - struct venc_callback *callback; - struct venc_platform_data *pdata; - struct device *pdev; - u32 output; - v4l2_std_id std; - spinlock_t lock; - void __iomem *venc_base; - void __iomem *vdaccfg_reg; - enum vpbe_version venc_type; -}; - -static inline struct venc_state *to_state(struct v4l2_subdev *sd) -{ - return container_of(sd, struct venc_state, sd); -} - -static inline u32 venc_read(struct v4l2_subdev *sd, u32 offset) -{ - struct venc_state *venc = to_state(sd); - - return readl(venc->venc_base + offset); -} - -static inline u32 venc_write(struct v4l2_subdev *sd, u32 offset, u32 val) -{ - struct venc_state *venc = to_state(sd); - - writel(val, (venc->venc_base + offset)); - - return val; -} - -static inline u32 venc_modify(struct v4l2_subdev *sd, u32 offset, - u32 val, u32 mask) -{ - u32 new_val = (venc_read(sd, offset) & ~mask) | (val & mask); - - venc_write(sd, offset, new_val); - - return new_val; -} - -static inline u32 vdaccfg_write(struct v4l2_subdev *sd, u32 val) -{ - struct venc_state *venc = to_state(sd); - - writel(val, venc->vdaccfg_reg); - - val = readl(venc->vdaccfg_reg); - - return val; -} - -#define VDAC_COMPONENT 0x543 -#define VDAC_S_VIDEO 0x210 -/* This function sets the dac of the VPBE for various outputs - */ -static int venc_set_dac(struct v4l2_subdev *sd, u32 out_index) -{ - switch (out_index) { - case 0: - v4l2_dbg(debug, 1, sd, "Setting output to Composite\n"); - venc_write(sd, VENC_DACSEL, 0); - break; - case 1: - v4l2_dbg(debug, 1, sd, "Setting output to Component\n"); - venc_write(sd, VENC_DACSEL, VDAC_COMPONENT); - break; - case 2: - v4l2_dbg(debug, 1, sd, "Setting output to S-video\n"); - venc_write(sd, VENC_DACSEL, VDAC_S_VIDEO); - break; - default: - return -EINVAL; - } - - return 0; -} - -static void venc_enabledigitaloutput(struct v4l2_subdev *sd, int benable) -{ - struct venc_state *venc = to_state(sd); - - v4l2_dbg(debug, 2, sd, "venc_enabledigitaloutput\n"); - - if (benable) { - venc_write(sd, VENC_VMOD, 0); - venc_write(sd, VENC_CVBS, 0); - venc_write(sd, VENC_LCDOUT, 0); - venc_write(sd, VENC_HSPLS, 0); - venc_write(sd, VENC_HSTART, 0); - venc_write(sd, VENC_HVALID, 0); - venc_write(sd, VENC_HINT, 0); - venc_write(sd, VENC_VSPLS, 0); - venc_write(sd, VENC_VSTART, 0); - venc_write(sd, VENC_VVALID, 0); - venc_write(sd, VENC_VINT, 0); - venc_write(sd, VENC_YCCCTL, 0); - venc_write(sd, VENC_DACSEL, 0); - - } else { - venc_write(sd, VENC_VMOD, 0); - /* disable VCLK output pin enable */ - venc_write(sd, VENC_VIDCTL, 0x141); - - /* Disable output sync pins */ - venc_write(sd, VENC_SYNCCTL, 0); - - /* Disable DCLOCK */ - venc_write(sd, VENC_DCLKCTL, 0); - venc_write(sd, VENC_DRGBX1, 0x0000057C); - - /* Disable LCD output control (accepting default polarity) */ - venc_write(sd, VENC_LCDOUT, 0); - if (venc->venc_type != VPBE_VERSION_3) - venc_write(sd, VENC_CMPNT, 0x100); - venc_write(sd, VENC_HSPLS, 0); - venc_write(sd, VENC_HINT, 0); - venc_write(sd, VENC_HSTART, 0); - venc_write(sd, VENC_HVALID, 0); - - venc_write(sd, VENC_VSPLS, 0); - venc_write(sd, VENC_VINT, 0); - venc_write(sd, VENC_VSTART, 0); - venc_write(sd, VENC_VVALID, 0); - - venc_write(sd, VENC_HSDLY, 0); - venc_write(sd, VENC_VSDLY, 0); - - venc_write(sd, VENC_YCCCTL, 0); - venc_write(sd, VENC_VSTARTA, 0); - - /* Set OSD clock and OSD Sync Adavance registers */ - venc_write(sd, VENC_OSDCLK0, 1); - venc_write(sd, VENC_OSDCLK1, 2); - } -} - -static void -venc_enable_vpss_clock(int venc_type, - enum vpbe_enc_timings_type type, - unsigned int pclock) -{ - if (venc_type == VPBE_VERSION_1) - return; - - if (venc_type == VPBE_VERSION_2 && (type == VPBE_ENC_STD || (type == - VPBE_ENC_DV_TIMINGS && pclock <= 27000000))) { - vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); - vpss_enable_clock(VPSS_VPBE_CLOCK, 1); - return; - } - - if (venc_type == VPBE_VERSION_3 && type == VPBE_ENC_STD) - vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 0); -} - -#define VDAC_CONFIG_SD_V3 0x0E21A6B6 -#define VDAC_CONFIG_SD_V2 0x081141CF -/* - * setting NTSC mode - */ -static int venc_set_ntsc(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - struct venc_platform_data *pdata = venc->pdata; - - v4l2_dbg(debug, 2, sd, "venc_set_ntsc\n"); - - /* Setup clock at VPSS & VENC for SD */ - vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); - if (pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_525_60) < 0) - return -EINVAL; - - venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_525_60); - venc_enabledigitaloutput(sd, 0); - - if (venc->venc_type == VPBE_VERSION_3) { - venc_write(sd, VENC_CLKCTL, 0x01); - venc_write(sd, VENC_VIDCTL, 0); - vdaccfg_write(sd, VDAC_CONFIG_SD_V3); - } else if (venc->venc_type == VPBE_VERSION_2) { - venc_write(sd, VENC_CLKCTL, 0x01); - venc_write(sd, VENC_VIDCTL, 0); - vdaccfg_write(sd, VDAC_CONFIG_SD_V2); - } else { - /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ - venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); - /* Set REC656 Mode */ - venc_write(sd, VENC_YCCCTL, 0x1); - venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAFRQ); - venc_modify(sd, VENC_VDPRO, 0, VENC_VDPRO_DAUPS); - } - - venc_write(sd, VENC_VMOD, 0); - venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), - VENC_VMOD_VIE); - venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); - venc_modify(sd, VENC_VMOD, (0 << VENC_VMOD_TVTYP_SHIFT), - VENC_VMOD_TVTYP); - venc_write(sd, VENC_DACTST, 0x0); - venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); - - return 0; -} - -/* - * setting PAL mode - */ -static int venc_set_pal(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - - v4l2_dbg(debug, 2, sd, "venc_set_pal\n"); - - /* Setup clock at VPSS & VENC for SD */ - vpss_enable_clock(VPSS_VENC_CLOCK_SEL, 1); - if (venc->pdata->setup_clock(VPBE_ENC_STD, V4L2_STD_625_50) < 0) - return -EINVAL; - - venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_STD, V4L2_STD_625_50); - venc_enabledigitaloutput(sd, 0); - - if (venc->venc_type == VPBE_VERSION_3) { - venc_write(sd, VENC_CLKCTL, 0x1); - venc_write(sd, VENC_VIDCTL, 0); - vdaccfg_write(sd, VDAC_CONFIG_SD_V3); - } else if (venc->venc_type == VPBE_VERSION_2) { - venc_write(sd, VENC_CLKCTL, 0x1); - venc_write(sd, VENC_VIDCTL, 0); - vdaccfg_write(sd, VDAC_CONFIG_SD_V2); - } else { - /* to set VENC CLK DIV to 1 - final clock is 54 MHz */ - venc_modify(sd, VENC_VIDCTL, 0, 1 << 1); - /* Set REC656 Mode */ - venc_write(sd, VENC_YCCCTL, 0x1); - } - - venc_modify(sd, VENC_SYNCCTL, 1 << VENC_SYNCCTL_OVD_SHIFT, - VENC_SYNCCTL_OVD); - venc_write(sd, VENC_VMOD, 0); - venc_modify(sd, VENC_VMOD, - (1 << VENC_VMOD_VIE_SHIFT), - VENC_VMOD_VIE); - venc_modify(sd, VENC_VMOD, - (0 << VENC_VMOD_VMD), VENC_VMOD_VMD); - venc_modify(sd, VENC_VMOD, - (1 << VENC_VMOD_TVTYP_SHIFT), - VENC_VMOD_TVTYP); - venc_write(sd, VENC_DACTST, 0x0); - venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); - - return 0; -} - -#define VDAC_CONFIG_HD_V2 0x081141EF -/* - * venc_set_480p59_94 - * - * This function configures the video encoder to EDTV(525p) component setting. - */ -static int venc_set_480p59_94(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - struct venc_platform_data *pdata = venc->pdata; - - v4l2_dbg(debug, 2, sd, "venc_set_480p59_94\n"); - if (venc->venc_type != VPBE_VERSION_1 && - venc->venc_type != VPBE_VERSION_2) - return -EINVAL; - - /* Setup clock at VPSS & VENC for SD */ - if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0) - return -EINVAL; - - venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000); - venc_enabledigitaloutput(sd, 0); - - if (venc->venc_type == VPBE_VERSION_2) - vdaccfg_write(sd, VDAC_CONFIG_HD_V2); - venc_write(sd, VENC_OSDCLK0, 0); - venc_write(sd, VENC_OSDCLK1, 1); - - if (venc->venc_type == VPBE_VERSION_1) { - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, - VENC_VDPRO_DAFRQ); - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, - VENC_VDPRO_DAUPS); - } - - venc_write(sd, VENC_VMOD, 0); - venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), - VENC_VMOD_VIE); - venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); - venc_modify(sd, VENC_VMOD, (HDTV_525P << VENC_VMOD_TVTYP_SHIFT), - VENC_VMOD_TVTYP); - venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << - VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); - - venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); - - return 0; -} - -/* - * venc_set_625p - * - * This function configures the video encoder to HDTV(625p) component setting - */ -static int venc_set_576p50(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - struct venc_platform_data *pdata = venc->pdata; - - v4l2_dbg(debug, 2, sd, "venc_set_576p50\n"); - - if (venc->venc_type != VPBE_VERSION_1 && - venc->venc_type != VPBE_VERSION_2) - return -EINVAL; - /* Setup clock at VPSS & VENC for SD */ - if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 27000000) < 0) - return -EINVAL; - - venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 27000000); - venc_enabledigitaloutput(sd, 0); - - if (venc->venc_type == VPBE_VERSION_2) - vdaccfg_write(sd, VDAC_CONFIG_HD_V2); - - venc_write(sd, VENC_OSDCLK0, 0); - venc_write(sd, VENC_OSDCLK1, 1); - - if (venc->venc_type == VPBE_VERSION_1) { - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAFRQ, - VENC_VDPRO_DAFRQ); - venc_modify(sd, VENC_VDPRO, VENC_VDPRO_DAUPS, - VENC_VDPRO_DAUPS); - } - - venc_write(sd, VENC_VMOD, 0); - venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), - VENC_VMOD_VIE); - venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); - venc_modify(sd, VENC_VMOD, (HDTV_625P << VENC_VMOD_TVTYP_SHIFT), - VENC_VMOD_TVTYP); - - venc_modify(sd, VENC_VMOD, VENC_VMOD_VDMD_YCBCR8 << - VENC_VMOD_VDMD_SHIFT, VENC_VMOD_VDMD); - venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); - - return 0; -} - -/* - * venc_set_720p60_internal - Setup 720p60 in venc for dm365 only - */ -static int venc_set_720p60_internal(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - struct venc_platform_data *pdata = venc->pdata; - - if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0) - return -EINVAL; - - venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000); - venc_enabledigitaloutput(sd, 0); - - venc_write(sd, VENC_OSDCLK0, 0); - venc_write(sd, VENC_OSDCLK1, 1); - - venc_write(sd, VENC_VMOD, 0); - /* DM365 component HD mode */ - venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), - VENC_VMOD_VIE); - venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); - venc_modify(sd, VENC_VMOD, (HDTV_720P << VENC_VMOD_TVTYP_SHIFT), - VENC_VMOD_TVTYP); - venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); - venc_write(sd, VENC_XHINTVL, 0); - return 0; -} - -/* - * venc_set_1080i30_internal - Setup 1080i30 in venc for dm365 only - */ -static int venc_set_1080i30_internal(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - struct venc_platform_data *pdata = venc->pdata; - - if (pdata->setup_clock(VPBE_ENC_DV_TIMINGS, 74250000) < 0) - return -EINVAL; - - venc_enable_vpss_clock(venc->venc_type, VPBE_ENC_DV_TIMINGS, 74250000); - venc_enabledigitaloutput(sd, 0); - - venc_write(sd, VENC_OSDCLK0, 0); - venc_write(sd, VENC_OSDCLK1, 1); - - - venc_write(sd, VENC_VMOD, 0); - /* DM365 component HD mode */ - venc_modify(sd, VENC_VMOD, (1 << VENC_VMOD_VIE_SHIFT), - VENC_VMOD_VIE); - venc_modify(sd, VENC_VMOD, VENC_VMOD_HDMD, VENC_VMOD_HDMD); - venc_modify(sd, VENC_VMOD, (HDTV_1080I << VENC_VMOD_TVTYP_SHIFT), - VENC_VMOD_TVTYP); - venc_modify(sd, VENC_VMOD, VENC_VMOD_VENC, VENC_VMOD_VENC); - venc_write(sd, VENC_XHINTVL, 0); - return 0; -} - -static int venc_s_std_output(struct v4l2_subdev *sd, v4l2_std_id norm) -{ - v4l2_dbg(debug, 1, sd, "venc_s_std_output\n"); - - if (norm & V4L2_STD_525_60) - return venc_set_ntsc(sd); - else if (norm & V4L2_STD_625_50) - return venc_set_pal(sd); - - return -EINVAL; -} - -static int venc_s_dv_timings(struct v4l2_subdev *sd, - struct v4l2_dv_timings *dv_timings) -{ - struct venc_state *venc = to_state(sd); - u32 height = dv_timings->bt.height; - int ret; - - v4l2_dbg(debug, 1, sd, "venc_s_dv_timings\n"); - - if (height == 576) - return venc_set_576p50(sd); - else if (height == 480) - return venc_set_480p59_94(sd); - else if ((height == 720) && - (venc->venc_type == VPBE_VERSION_2)) { - /* TBD setup internal 720p mode here */ - ret = venc_set_720p60_internal(sd); - /* for DM365 VPBE, there is DAC inside */ - vdaccfg_write(sd, VDAC_CONFIG_HD_V2); - return ret; - } else if ((height == 1080) && - (venc->venc_type == VPBE_VERSION_2)) { - /* TBD setup internal 1080i mode here */ - ret = venc_set_1080i30_internal(sd); - /* for DM365 VPBE, there is DAC inside */ - vdaccfg_write(sd, VDAC_CONFIG_HD_V2); - return ret; - } - return -EINVAL; -} - -static int venc_s_routing(struct v4l2_subdev *sd, u32 input, u32 output, - u32 config) -{ - struct venc_state *venc = to_state(sd); - int ret; - - v4l2_dbg(debug, 1, sd, "venc_s_routing\n"); - - ret = venc_set_dac(sd, output); - if (!ret) - venc->output = output; - - return ret; -} - -static long venc_command(struct v4l2_subdev *sd, unsigned int cmd, void *arg) -{ - u32 val; - - switch (cmd) { - case VENC_GET_FLD: - val = venc_read(sd, VENC_VSTAT); - *((int *)arg) = ((val & VENC_VSTAT_FIDST) == - VENC_VSTAT_FIDST); - break; - default: - v4l2_err(sd, "Wrong IOCTL cmd\n"); - break; - } - - return 0; -} - -static const struct v4l2_subdev_core_ops venc_core_ops = { - .command = venc_command, -}; - -static const struct v4l2_subdev_video_ops venc_video_ops = { - .s_routing = venc_s_routing, - .s_std_output = venc_s_std_output, - .s_dv_timings = venc_s_dv_timings, -}; - -static const struct v4l2_subdev_ops venc_ops = { - .core = &venc_core_ops, - .video = &venc_video_ops, -}; - -static int venc_initialize(struct v4l2_subdev *sd) -{ - struct venc_state *venc = to_state(sd); - int ret; - - /* Set default to output to composite and std to NTSC */ - venc->output = 0; - venc->std = V4L2_STD_525_60; - - ret = venc_s_routing(sd, 0, venc->output, 0); - if (ret < 0) { - v4l2_err(sd, "Error setting output during init\n"); - return -EINVAL; - } - - ret = venc_s_std_output(sd, venc->std); - if (ret < 0) { - v4l2_err(sd, "Error setting std during init\n"); - return -EINVAL; - } - - return ret; -} - -static int venc_device_get(struct device *dev, void *data) -{ - struct platform_device *pdev = to_platform_device(dev); - struct venc_state **venc = data; - - if (strstr(pdev->name, "vpbe-venc") != NULL) - *venc = platform_get_drvdata(pdev); - - return 0; -} - -struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, - const char *venc_name) -{ - struct venc_state *venc = NULL; - - bus_for_each_dev(&platform_bus_type, NULL, &venc, - venc_device_get); - if (venc == NULL) - return NULL; - - v4l2_subdev_init(&venc->sd, &venc_ops); - - strscpy(venc->sd.name, venc_name, sizeof(venc->sd.name)); - if (v4l2_device_register_subdev(v4l2_dev, &venc->sd) < 0) { - v4l2_err(v4l2_dev, - "vpbe unable to register venc sub device\n"); - return NULL; - } - if (venc_initialize(&venc->sd)) { - v4l2_err(v4l2_dev, - "vpbe venc initialization failed\n"); - return NULL; - } - - return &venc->sd; -} -EXPORT_SYMBOL(venc_sub_dev_init); - -static int venc_probe(struct platform_device *pdev) -{ - const struct platform_device_id *pdev_id; - struct venc_state *venc; - - if (!pdev->dev.platform_data) { - dev_err(&pdev->dev, "No platform data for VENC sub device"); - return -EINVAL; - } - - pdev_id = platform_get_device_id(pdev); - if (!pdev_id) - return -EINVAL; - - venc = devm_kzalloc(&pdev->dev, sizeof(struct venc_state), GFP_KERNEL); - if (venc == NULL) - return -ENOMEM; - - venc->venc_type = pdev_id->driver_data; - venc->pdev = &pdev->dev; - venc->pdata = pdev->dev.platform_data; - - venc->venc_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(venc->venc_base)) - return PTR_ERR(venc->venc_base); - - if (venc->venc_type != VPBE_VERSION_1) { - venc->vdaccfg_reg = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(venc->vdaccfg_reg)) - return PTR_ERR(venc->vdaccfg_reg); - } - spin_lock_init(&venc->lock); - platform_set_drvdata(pdev, venc); - dev_notice(venc->pdev, "VENC sub device probe success\n"); - - return 0; -} - -static int venc_remove(struct platform_device *pdev) -{ - return 0; -} - -static struct platform_driver venc_driver = { - .probe = venc_probe, - .remove = venc_remove, - .driver = { - .name = MODULE_NAME, - }, - .id_table = vpbe_venc_devtype -}; - -module_platform_driver(venc_driver); - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("VPBE VENC Driver"); -MODULE_AUTHOR("Texas Instruments"); diff --git a/drivers/media/platform/ti/davinci/vpbe_venc_regs.h b/drivers/media/platform/ti/davinci/vpbe_venc_regs.h deleted file mode 100644 index 29d8fc3af662..000000000000 --- a/drivers/media/platform/ti/davinci/vpbe_venc_regs.h +++ /dev/null @@ -1,165 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2006-2010 Texas Instruments Inc - */ -#ifndef _VPBE_VENC_REGS_H -#define _VPBE_VENC_REGS_H - -/* VPBE Video Encoder / Digital LCD Subsystem Registers (VENC) */ -#define VENC_VMOD 0x00 -#define VENC_VIDCTL 0x04 -#define VENC_VDPRO 0x08 -#define VENC_SYNCCTL 0x0C -#define VENC_HSPLS 0x10 -#define VENC_VSPLS 0x14 -#define VENC_HINT 0x18 -#define VENC_HSTART 0x1C -#define VENC_HVALID 0x20 -#define VENC_VINT 0x24 -#define VENC_VSTART 0x28 -#define VENC_VVALID 0x2C -#define VENC_HSDLY 0x30 -#define VENC_VSDLY 0x34 -#define VENC_YCCCTL 0x38 -#define VENC_RGBCTL 0x3C -#define VENC_RGBCLP 0x40 -#define VENC_LINECTL 0x44 -#define VENC_CULLLINE 0x48 -#define VENC_LCDOUT 0x4C -#define VENC_BRTS 0x50 -#define VENC_BRTW 0x54 -#define VENC_ACCTL 0x58 -#define VENC_PWMP 0x5C -#define VENC_PWMW 0x60 -#define VENC_DCLKCTL 0x64 -#define VENC_DCLKPTN0 0x68 -#define VENC_DCLKPTN1 0x6C -#define VENC_DCLKPTN2 0x70 -#define VENC_DCLKPTN3 0x74 -#define VENC_DCLKPTN0A 0x78 -#define VENC_DCLKPTN1A 0x7C -#define VENC_DCLKPTN2A 0x80 -#define VENC_DCLKPTN3A 0x84 -#define VENC_DCLKHS 0x88 -#define VENC_DCLKHSA 0x8C -#define VENC_DCLKHR 0x90 -#define VENC_DCLKVS 0x94 -#define VENC_DCLKVR 0x98 -#define VENC_CAPCTL 0x9C -#define VENC_CAPDO 0xA0 -#define VENC_CAPDE 0xA4 -#define VENC_ATR0 0xA8 -#define VENC_ATR1 0xAC -#define VENC_ATR2 0xB0 -#define VENC_VSTAT 0xB8 -#define VENC_RAMADR 0xBC -#define VENC_RAMPORT 0xC0 -#define VENC_DACTST 0xC4 -#define VENC_YCOLVL 0xC8 -#define VENC_SCPROG 0xCC -#define VENC_CVBS 0xDC -#define VENC_CMPNT 0xE0 -#define VENC_ETMG0 0xE4 -#define VENC_ETMG1 0xE8 -#define VENC_ETMG2 0xEC -#define VENC_ETMG3 0xF0 -#define VENC_DACSEL 0xF4 -#define VENC_ARGBX0 0x100 -#define VENC_ARGBX1 0x104 -#define VENC_ARGBX2 0x108 -#define VENC_ARGBX3 0x10C -#define VENC_ARGBX4 0x110 -#define VENC_DRGBX0 0x114 -#define VENC_DRGBX1 0x118 -#define VENC_DRGBX2 0x11C -#define VENC_DRGBX3 0x120 -#define VENC_DRGBX4 0x124 -#define VENC_VSTARTA 0x128 -#define VENC_OSDCLK0 0x12C -#define VENC_OSDCLK1 0x130 -#define VENC_HVLDCL0 0x134 -#define VENC_HVLDCL1 0x138 -#define VENC_OSDHADV 0x13C -#define VENC_CLKCTL 0x140 -#define VENC_GAMCTL 0x144 -#define VENC_XHINTVL 0x174 - -/* bit definitions */ -#define VPBE_PCR_VENC_DIV (1 << 1) -#define VPBE_PCR_CLK_OFF (1 << 0) - -#define VENC_VMOD_VDMD_SHIFT 12 -#define VENC_VMOD_VDMD_YCBCR16 0 -#define VENC_VMOD_VDMD_YCBCR8 1 -#define VENC_VMOD_VDMD_RGB666 2 -#define VENC_VMOD_VDMD_RGB8 3 -#define VENC_VMOD_VDMD_EPSON 4 -#define VENC_VMOD_VDMD_CASIO 5 -#define VENC_VMOD_VDMD_UDISPQVGA 6 -#define VENC_VMOD_VDMD_STNLCD 7 -#define VENC_VMOD_VIE_SHIFT 1 -#define VENC_VMOD_VDMD (7 << 12) -#define VENC_VMOD_ITLCL (1 << 11) -#define VENC_VMOD_ITLC (1 << 10) -#define VENC_VMOD_NSIT (1 << 9) -#define VENC_VMOD_HDMD (1 << 8) -#define VENC_VMOD_TVTYP_SHIFT 6 -#define VENC_VMOD_TVTYP (3 << 6) -#define VENC_VMOD_SLAVE (1 << 5) -#define VENC_VMOD_VMD (1 << 4) -#define VENC_VMOD_BLNK (1 << 3) -#define VENC_VMOD_VIE (1 << 1) -#define VENC_VMOD_VENC (1 << 0) - -/* VMOD TVTYP options for HDMD=0 */ -#define SDTV_NTSC 0 -#define SDTV_PAL 1 -/* VMOD TVTYP options for HDMD=1 */ -#define HDTV_525P 0 -#define HDTV_625P 1 -#define HDTV_1080I 2 -#define HDTV_720P 3 - -#define VENC_VIDCTL_VCLKP (1 << 14) -#define VENC_VIDCTL_VCLKE_SHIFT 13 -#define VENC_VIDCTL_VCLKE (1 << 13) -#define VENC_VIDCTL_VCLKZ_SHIFT 12 -#define VENC_VIDCTL_VCLKZ (1 << 12) -#define VENC_VIDCTL_SYDIR_SHIFT 8 -#define VENC_VIDCTL_SYDIR (1 << 8) -#define VENC_VIDCTL_DOMD_SHIFT 4 -#define VENC_VIDCTL_DOMD (3 << 4) -#define VENC_VIDCTL_YCDIR_SHIFT 0 -#define VENC_VIDCTL_YCDIR (1 << 0) - -#define VENC_VDPRO_ATYCC_SHIFT 5 -#define VENC_VDPRO_ATYCC (1 << 5) -#define VENC_VDPRO_ATCOM_SHIFT 4 -#define VENC_VDPRO_ATCOM (1 << 4) -#define VENC_VDPRO_DAFRQ (1 << 3) -#define VENC_VDPRO_DAUPS (1 << 2) -#define VENC_VDPRO_CUPS (1 << 1) -#define VENC_VDPRO_YUPS (1 << 0) - -#define VENC_SYNCCTL_VPL_SHIFT 3 -#define VENC_SYNCCTL_VPL (1 << 3) -#define VENC_SYNCCTL_HPL_SHIFT 2 -#define VENC_SYNCCTL_HPL (1 << 2) -#define VENC_SYNCCTL_SYEV_SHIFT 1 -#define VENC_SYNCCTL_SYEV (1 << 1) -#define VENC_SYNCCTL_SYEH_SHIFT 0 -#define VENC_SYNCCTL_SYEH (1 << 0) -#define VENC_SYNCCTL_OVD_SHIFT 14 -#define VENC_SYNCCTL_OVD (1 << 14) - -#define VENC_DCLKCTL_DCKEC_SHIFT 11 -#define VENC_DCLKCTL_DCKEC (1 << 11) -#define VENC_DCLKCTL_DCKPW_SHIFT 0 -#define VENC_DCLKCTL_DCKPW (0x3f << 0) - -#define VENC_VSTAT_FIDST (1 << 4) - -#define VENC_CMPNT_MRGB_SHIFT 14 -#define VENC_CMPNT_MRGB (1 << 14) - -#endif /* _VPBE_VENC_REGS_H */ diff --git a/drivers/media/platform/ti/davinci/vpss.c b/drivers/media/platform/ti/davinci/vpss.c deleted file mode 100644 index d15b991ab17c..000000000000 --- a/drivers/media/platform/ti/davinci/vpss.c +++ /dev/null @@ -1,529 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-or-later -/* - * Copyright (C) 2009 Texas Instruments. - * - * common vpss system module platform driver for all video drivers. - */ -#include -#include -#include -#include -#include - -#include - -MODULE_LICENSE("GPL"); -MODULE_DESCRIPTION("VPSS Driver"); -MODULE_AUTHOR("Texas Instruments"); - -/* DM644x defines */ -#define DM644X_SBL_PCR_VPSS (4) - -#define DM355_VPSSBL_INTSEL 0x10 -#define DM355_VPSSBL_EVTSEL 0x14 -/* vpss BL register offsets */ -#define DM355_VPSSBL_CCDCMUX 0x1c -/* vpss CLK register offsets */ -#define DM355_VPSSCLK_CLKCTRL 0x04 -/* masks and shifts */ -#define VPSS_HSSISEL_SHIFT 4 -/* - * VDINT0 - vpss_int0, VDINT1 - vpss_int1, H3A - vpss_int4, - * IPIPE_INT1_SDR - vpss_int5 - */ -#define DM355_VPSSBL_INTSEL_DEFAULT 0xff83ff10 -/* VENCINT - vpss_int8 */ -#define DM355_VPSSBL_EVTSEL_DEFAULT 0x4 - -#define DM365_ISP5_PCCR 0x04 -#define DM365_ISP5_PCCR_BL_CLK_ENABLE BIT(0) -#define DM365_ISP5_PCCR_ISIF_CLK_ENABLE BIT(1) -#define DM365_ISP5_PCCR_H3A_CLK_ENABLE BIT(2) -#define DM365_ISP5_PCCR_RSZ_CLK_ENABLE BIT(3) -#define DM365_ISP5_PCCR_IPIPE_CLK_ENABLE BIT(4) -#define DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE BIT(5) -#define DM365_ISP5_PCCR_RSV BIT(6) - -#define DM365_ISP5_BCR 0x08 -#define DM365_ISP5_BCR_ISIF_OUT_ENABLE BIT(1) - -#define DM365_ISP5_INTSEL1 0x10 -#define DM365_ISP5_INTSEL2 0x14 -#define DM365_ISP5_INTSEL3 0x18 -#define DM365_ISP5_CCDCMUX 0x20 -#define DM365_ISP5_PG_FRAME_SIZE 0x28 -#define DM365_VPBE_CLK_CTRL 0x00 - -#define VPSS_CLK_CTRL 0x01c40044 -#define VPSS_CLK_CTRL_VENCCLKEN BIT(3) -#define VPSS_CLK_CTRL_DACCLKEN BIT(4) - -/* - * vpss interrupts. VDINT0 - vpss_int0, VDINT1 - vpss_int1, - * AF - vpss_int3 - */ -#define DM365_ISP5_INTSEL1_DEFAULT 0x0b1f0100 -/* AEW - vpss_int6, RSZ_INT_DMA - vpss_int5 */ -#define DM365_ISP5_INTSEL2_DEFAULT 0x1f0a0f1f -/* VENC - vpss_int8 */ -#define DM365_ISP5_INTSEL3_DEFAULT 0x00000015 - -/* masks and shifts for DM365*/ -#define DM365_CCDC_PG_VD_POL_SHIFT 0 -#define DM365_CCDC_PG_HD_POL_SHIFT 1 - -#define CCD_SRC_SEL_MASK (BIT_MASK(5) | BIT_MASK(4)) -#define CCD_SRC_SEL_SHIFT 4 - -/* Different SoC platforms supported by this driver */ -enum vpss_platform_type { - DM644X, - DM355, - DM365, -}; - -/* - * vpss operations. Depends on platform. Not all functions are available - * on all platforms. The api, first check if a function is available before - * invoking it. In the probe, the function ptrs are initialized based on - * vpss name. vpss name can be "dm355_vpss", "dm644x_vpss" etc. - */ -struct vpss_hw_ops { - /* enable clock */ - int (*enable_clock)(enum vpss_clock_sel clock_sel, int en); - /* select input to ccdc */ - void (*select_ccdc_source)(enum vpss_ccdc_source_sel src_sel); - /* clear wbl overflow bit */ - int (*clear_wbl_overflow)(enum vpss_wbl_sel wbl_sel); - /* set sync polarity */ - void (*set_sync_pol)(struct vpss_sync_pol); - /* set the PG_FRAME_SIZE register*/ - void (*set_pg_frame_size)(struct vpss_pg_frame_size); - /* check and clear interrupt if occurred */ - int (*dma_complete_interrupt)(void); -}; - -/* vpss configuration */ -struct vpss_oper_config { - __iomem void *vpss_regs_base0; - __iomem void *vpss_regs_base1; - __iomem void *vpss_regs_base2; - enum vpss_platform_type platform; - spinlock_t vpss_lock; - struct vpss_hw_ops hw_ops; -}; - -static struct vpss_oper_config oper_cfg; - -/* register access routines */ -static inline u32 bl_regr(u32 offset) -{ - return __raw_readl(oper_cfg.vpss_regs_base0 + offset); -} - -static inline void bl_regw(u32 val, u32 offset) -{ - __raw_writel(val, oper_cfg.vpss_regs_base0 + offset); -} - -static inline u32 vpss_regr(u32 offset) -{ - return __raw_readl(oper_cfg.vpss_regs_base1 + offset); -} - -static inline void vpss_regw(u32 val, u32 offset) -{ - __raw_writel(val, oper_cfg.vpss_regs_base1 + offset); -} - -/* For DM365 only */ -static inline u32 isp5_read(u32 offset) -{ - return __raw_readl(oper_cfg.vpss_regs_base0 + offset); -} - -/* For DM365 only */ -static inline void isp5_write(u32 val, u32 offset) -{ - __raw_writel(val, oper_cfg.vpss_regs_base0 + offset); -} - -static void dm365_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) -{ - u32 temp = isp5_read(DM365_ISP5_CCDCMUX) & ~CCD_SRC_SEL_MASK; - - /* if we are using pattern generator, enable it */ - if (src_sel == VPSS_PGLPBK || src_sel == VPSS_CCDCPG) - temp |= 0x08; - - temp |= (src_sel << CCD_SRC_SEL_SHIFT); - isp5_write(temp, DM365_ISP5_CCDCMUX); -} - -static void dm355_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) -{ - bl_regw(src_sel << VPSS_HSSISEL_SHIFT, DM355_VPSSBL_CCDCMUX); -} - -int vpss_dma_complete_interrupt(void) -{ - if (!oper_cfg.hw_ops.dma_complete_interrupt) - return 2; - return oper_cfg.hw_ops.dma_complete_interrupt(); -} -EXPORT_SYMBOL(vpss_dma_complete_interrupt); - -int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel) -{ - if (!oper_cfg.hw_ops.select_ccdc_source) - return -EINVAL; - - oper_cfg.hw_ops.select_ccdc_source(src_sel); - return 0; -} -EXPORT_SYMBOL(vpss_select_ccdc_source); - -static int dm644x_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) -{ - u32 mask = 1, val; - - if (wbl_sel < VPSS_PCR_AEW_WBL_0 || - wbl_sel > VPSS_PCR_CCDC_WBL_O) - return -EINVAL; - - /* writing a 0 clear the overflow */ - mask = ~(mask << wbl_sel); - val = bl_regr(DM644X_SBL_PCR_VPSS) & mask; - bl_regw(val, DM644X_SBL_PCR_VPSS); - return 0; -} - -void vpss_set_sync_pol(struct vpss_sync_pol sync) -{ - if (!oper_cfg.hw_ops.set_sync_pol) - return; - - oper_cfg.hw_ops.set_sync_pol(sync); -} -EXPORT_SYMBOL(vpss_set_sync_pol); - -int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel) -{ - if (!oper_cfg.hw_ops.clear_wbl_overflow) - return -EINVAL; - - return oper_cfg.hw_ops.clear_wbl_overflow(wbl_sel); -} -EXPORT_SYMBOL(vpss_clear_wbl_overflow); - -/* - * dm355_enable_clock - Enable VPSS Clock - * @clock_sel: Clock to be enabled/disabled - * @en: enable/disable flag - * - * This is called to enable or disable a vpss clock - */ -static int dm355_enable_clock(enum vpss_clock_sel clock_sel, int en) -{ - unsigned long flags; - u32 utemp, mask = 0x1, shift = 0; - - switch (clock_sel) { - case VPSS_VPBE_CLOCK: - /* nothing since lsb */ - break; - case VPSS_VENC_CLOCK_SEL: - shift = 2; - break; - case VPSS_CFALD_CLOCK: - shift = 3; - break; - case VPSS_H3A_CLOCK: - shift = 4; - break; - case VPSS_IPIPE_CLOCK: - shift = 5; - break; - case VPSS_CCDC_CLOCK: - shift = 6; - break; - default: - printk(KERN_ERR "dm355_enable_clock: Invalid selector: %d\n", - clock_sel); - return -EINVAL; - } - - spin_lock_irqsave(&oper_cfg.vpss_lock, flags); - utemp = vpss_regr(DM355_VPSSCLK_CLKCTRL); - if (!en) - utemp &= ~(mask << shift); - else - utemp |= (mask << shift); - - vpss_regw(utemp, DM355_VPSSCLK_CLKCTRL); - spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); - return 0; -} - -static int dm365_enable_clock(enum vpss_clock_sel clock_sel, int en) -{ - unsigned long flags; - u32 utemp, mask = 0x1, shift = 0, offset = DM365_ISP5_PCCR; - u32 (*read)(u32 offset) = isp5_read; - void(*write)(u32 val, u32 offset) = isp5_write; - - switch (clock_sel) { - case VPSS_BL_CLOCK: - break; - case VPSS_CCDC_CLOCK: - shift = 1; - break; - case VPSS_H3A_CLOCK: - shift = 2; - break; - case VPSS_RSZ_CLOCK: - shift = 3; - break; - case VPSS_IPIPE_CLOCK: - shift = 4; - break; - case VPSS_IPIPEIF_CLOCK: - shift = 5; - break; - case VPSS_PCLK_INTERNAL: - shift = 6; - break; - case VPSS_PSYNC_CLOCK_SEL: - shift = 7; - break; - case VPSS_VPBE_CLOCK: - read = vpss_regr; - write = vpss_regw; - offset = DM365_VPBE_CLK_CTRL; - break; - case VPSS_VENC_CLOCK_SEL: - shift = 2; - read = vpss_regr; - write = vpss_regw; - offset = DM365_VPBE_CLK_CTRL; - break; - case VPSS_LDC_CLOCK: - shift = 3; - read = vpss_regr; - write = vpss_regw; - offset = DM365_VPBE_CLK_CTRL; - break; - case VPSS_FDIF_CLOCK: - shift = 4; - read = vpss_regr; - write = vpss_regw; - offset = DM365_VPBE_CLK_CTRL; - break; - case VPSS_OSD_CLOCK_SEL: - shift = 6; - read = vpss_regr; - write = vpss_regw; - offset = DM365_VPBE_CLK_CTRL; - break; - case VPSS_LDC_CLOCK_SEL: - shift = 7; - read = vpss_regr; - write = vpss_regw; - offset = DM365_VPBE_CLK_CTRL; - break; - default: - printk(KERN_ERR "dm365_enable_clock: Invalid selector: %d\n", - clock_sel); - return -1; - } - - spin_lock_irqsave(&oper_cfg.vpss_lock, flags); - utemp = read(offset); - if (!en) { - mask = ~mask; - utemp &= (mask << shift); - } else - utemp |= (mask << shift); - - write(utemp, offset); - spin_unlock_irqrestore(&oper_cfg.vpss_lock, flags); - - return 0; -} - -int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en) -{ - if (!oper_cfg.hw_ops.enable_clock) - return -EINVAL; - - return oper_cfg.hw_ops.enable_clock(clock_sel, en); -} -EXPORT_SYMBOL(vpss_enable_clock); - -void dm365_vpss_set_sync_pol(struct vpss_sync_pol sync) -{ - int val = 0; - val = isp5_read(DM365_ISP5_CCDCMUX); - - val |= (sync.ccdpg_hdpol << DM365_CCDC_PG_HD_POL_SHIFT); - val |= (sync.ccdpg_vdpol << DM365_CCDC_PG_VD_POL_SHIFT); - - isp5_write(val, DM365_ISP5_CCDCMUX); -} -EXPORT_SYMBOL(dm365_vpss_set_sync_pol); - -void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size) -{ - if (!oper_cfg.hw_ops.set_pg_frame_size) - return; - - oper_cfg.hw_ops.set_pg_frame_size(frame_size); -} -EXPORT_SYMBOL(vpss_set_pg_frame_size); - -void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size) -{ - int current_reg = ((frame_size.hlpfr >> 1) - 1) << 16; - - current_reg |= (frame_size.pplen - 1); - isp5_write(current_reg, DM365_ISP5_PG_FRAME_SIZE); -} -EXPORT_SYMBOL(dm365_vpss_set_pg_frame_size); - -static int vpss_probe(struct platform_device *pdev) -{ - char *platform_name; - - if (!pdev->dev.platform_data) { - dev_err(&pdev->dev, "no platform data\n"); - return -ENOENT; - } - - platform_name = pdev->dev.platform_data; - if (!strcmp(platform_name, "dm355_vpss")) - oper_cfg.platform = DM355; - else if (!strcmp(platform_name, "dm365_vpss")) - oper_cfg.platform = DM365; - else if (!strcmp(platform_name, "dm644x_vpss")) - oper_cfg.platform = DM644X; - else { - dev_err(&pdev->dev, "vpss driver not supported on this platform\n"); - return -ENODEV; - } - - dev_info(&pdev->dev, "%s vpss probed\n", platform_name); - oper_cfg.vpss_regs_base0 = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(oper_cfg.vpss_regs_base0)) - return PTR_ERR(oper_cfg.vpss_regs_base0); - - if (oper_cfg.platform == DM355 || oper_cfg.platform == DM365) { - oper_cfg.vpss_regs_base1 = devm_platform_ioremap_resource(pdev, 1); - if (IS_ERR(oper_cfg.vpss_regs_base1)) - return PTR_ERR(oper_cfg.vpss_regs_base1); - } - - if (oper_cfg.platform == DM355) { - oper_cfg.hw_ops.enable_clock = dm355_enable_clock; - oper_cfg.hw_ops.select_ccdc_source = dm355_select_ccdc_source; - /* Setup vpss interrupts */ - bl_regw(DM355_VPSSBL_INTSEL_DEFAULT, DM355_VPSSBL_INTSEL); - bl_regw(DM355_VPSSBL_EVTSEL_DEFAULT, DM355_VPSSBL_EVTSEL); - } else if (oper_cfg.platform == DM365) { - oper_cfg.hw_ops.enable_clock = dm365_enable_clock; - oper_cfg.hw_ops.select_ccdc_source = dm365_select_ccdc_source; - /* Setup vpss interrupts */ - isp5_write((isp5_read(DM365_ISP5_PCCR) | - DM365_ISP5_PCCR_BL_CLK_ENABLE | - DM365_ISP5_PCCR_ISIF_CLK_ENABLE | - DM365_ISP5_PCCR_H3A_CLK_ENABLE | - DM365_ISP5_PCCR_RSZ_CLK_ENABLE | - DM365_ISP5_PCCR_IPIPE_CLK_ENABLE | - DM365_ISP5_PCCR_IPIPEIF_CLK_ENABLE | - DM365_ISP5_PCCR_RSV), DM365_ISP5_PCCR); - isp5_write((isp5_read(DM365_ISP5_BCR) | - DM365_ISP5_BCR_ISIF_OUT_ENABLE), DM365_ISP5_BCR); - isp5_write(DM365_ISP5_INTSEL1_DEFAULT, DM365_ISP5_INTSEL1); - isp5_write(DM365_ISP5_INTSEL2_DEFAULT, DM365_ISP5_INTSEL2); - isp5_write(DM365_ISP5_INTSEL3_DEFAULT, DM365_ISP5_INTSEL3); - } else - oper_cfg.hw_ops.clear_wbl_overflow = dm644x_clear_wbl_overflow; - - pm_runtime_enable(&pdev->dev); - - pm_runtime_get(&pdev->dev); - - spin_lock_init(&oper_cfg.vpss_lock); - dev_info(&pdev->dev, "%s vpss probe success\n", platform_name); - - return 0; -} - -static int vpss_remove(struct platform_device *pdev) -{ - pm_runtime_disable(&pdev->dev); - return 0; -} - -static int vpss_suspend(struct device *dev) -{ - pm_runtime_put(dev); - return 0; -} - -static int vpss_resume(struct device *dev) -{ - pm_runtime_get(dev); - return 0; -} - -static const struct dev_pm_ops vpss_pm_ops = { - .suspend = vpss_suspend, - .resume = vpss_resume, -}; - -static struct platform_driver vpss_driver = { - .driver = { - .name = "vpss", - .pm = &vpss_pm_ops, - }, - .remove = vpss_remove, - .probe = vpss_probe, -}; - -static void vpss_exit(void) -{ - platform_driver_unregister(&vpss_driver); - iounmap(oper_cfg.vpss_regs_base2); - release_mem_region(VPSS_CLK_CTRL, 4); -} - -static int __init vpss_init(void) -{ - int ret; - - if (!request_mem_region(VPSS_CLK_CTRL, 4, "vpss_clock_control")) - return -EBUSY; - - oper_cfg.vpss_regs_base2 = ioremap(VPSS_CLK_CTRL, 4); - if (unlikely(!oper_cfg.vpss_regs_base2)) { - ret = -ENOMEM; - goto err_ioremap; - } - - writel(VPSS_CLK_CTRL_VENCCLKEN | - VPSS_CLK_CTRL_DACCLKEN, oper_cfg.vpss_regs_base2); - - ret = platform_driver_register(&vpss_driver); - if (ret) - goto err_pd_register; - - return 0; - -err_pd_register: - iounmap(oper_cfg.vpss_regs_base2); -err_ioremap: - release_mem_region(VPSS_CLK_CTRL, 4); - return ret; -} -subsys_initcall(vpss_init); -module_exit(vpss_exit); diff --git a/include/media/davinci/vpbe.h b/include/media/davinci/vpbe.h deleted file mode 100644 index e74a93475d21..000000000000 --- a/include/media/davinci/vpbe.h +++ /dev/null @@ -1,184 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#ifndef _VPBE_H -#define _VPBE_H - -#include -#include - -#include -#include -#include -#include -#include -#include - -/* OSD configuration info */ -struct osd_config_info { - char module_name[32]; -}; - -struct vpbe_output { - struct v4l2_output output; - /* - * If output capabilities include dv_timings, list supported timings - * below - */ - char *subdev_name; - /* - * defualt_mode identifies the default timings set at the venc or - * external encoder. - */ - char *default_mode; - /* - * Fields below are used for supporting multiple modes. For example, - * LCD panel might support different modes and they are listed here. - * Similarly for supporting external encoders, lcd controller port - * requires a set of non-standard timing values to be listed here for - * each supported mode since venc is used in non-standard timing mode - * for interfacing with external encoder similar to configuring lcd - * panel timings - */ - unsigned int num_modes; - struct vpbe_enc_mode_info *modes; - /* - * Bus configuration goes here for external encoders. Some encoders - * may require multiple interface types for each of the output. For - * example, SD modes would use YCC8 where as HD mode would use YCC16. - * Not sure if this is needed on a per mode basis instead of per - * output basis. If per mode is needed, we may have to move this to - * mode_info structure - */ - u32 if_params; -}; - -/* encoder configuration info */ -struct encoder_config_info { - char module_name[32]; - /* Is this an i2c device ? */ - unsigned int is_i2c:1; - /* i2c subdevice board info */ - struct i2c_board_info board_info; -}; - -/*amplifier configuration info */ -struct amp_config_info { - char module_name[32]; - /* Is this an i2c device ? */ - unsigned int is_i2c:1; - /* i2c subdevice board info */ - struct i2c_board_info board_info; -}; - -/* structure for defining vpbe display subsystem components */ -struct vpbe_config { - char module_name[32]; - /* i2c bus adapter no */ - int i2c_adapter_id; - struct osd_config_info osd; - struct encoder_config_info venc; - /* external encoder information goes here */ - int num_ext_encoders; - struct encoder_config_info *ext_encoders; - /* amplifier information goes here */ - struct amp_config_info *amp; - unsigned int num_outputs; - /* Order is venc outputs followed by LCD and then external encoders */ - struct vpbe_output *outputs; -}; - -struct vpbe_device; - -struct vpbe_device_ops { - /* Enumerate the outputs */ - int (*enum_outputs)(struct vpbe_device *vpbe_dev, - struct v4l2_output *output); - - /* Set output to the given index */ - int (*set_output)(struct vpbe_device *vpbe_dev, - int index); - - /* Get current output */ - unsigned int (*get_output)(struct vpbe_device *vpbe_dev); - - /* Set DV preset at current output */ - int (*s_dv_timings)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_timings *dv_timings); - - /* Get DV presets supported at the output */ - int (*g_dv_timings)(struct vpbe_device *vpbe_dev, - struct v4l2_dv_timings *dv_timings); - - /* Enumerate the DV Presets supported at the output */ - int (*enum_dv_timings)(struct vpbe_device *vpbe_dev, - struct v4l2_enum_dv_timings *timings_info); - - /* Set std at the output */ - int (*s_std)(struct vpbe_device *vpbe_dev, v4l2_std_id std_id); - - /* Get the current std at the output */ - int (*g_std)(struct vpbe_device *vpbe_dev, v4l2_std_id *std_id); - - /* initialize the device */ - int (*initialize)(struct device *dev, struct vpbe_device *vpbe_dev); - - /* De-initialize the device */ - void (*deinitialize)(struct device *dev, struct vpbe_device *vpbe_dev); - - /* Get the current mode info */ - int (*get_mode_info)(struct vpbe_device *vpbe_dev, - struct vpbe_enc_mode_info*); - - /* - * Set the current mode in the encoder. Alternate way of setting - * standard or DV preset or custom timings in the encoder - */ - int (*set_mode)(struct vpbe_device *vpbe_dev, - struct vpbe_enc_mode_info*); - /* Power management operations */ - int (*suspend)(struct vpbe_device *vpbe_dev); - int (*resume)(struct vpbe_device *vpbe_dev); -}; - -/* struct for vpbe device */ -struct vpbe_device { - /* V4l2 device */ - struct v4l2_device v4l2_dev; - /* vpbe dispay controller cfg */ - struct vpbe_config *cfg; - /* parent device */ - struct device *pdev; - /* external encoder v4l2 sub devices */ - struct v4l2_subdev **encoders; - /* current encoder index */ - int current_sd_index; - /* external amplifier v4l2 subdevice */ - struct v4l2_subdev *amp; - struct mutex lock; - /* device initialized */ - int initialized; - /* vpbe dac clock */ - struct clk *dac_clk; - /* osd_device pointer */ - struct osd_state *osd_device; - /* venc device pointer */ - struct venc_platform_data *venc_device; - /* - * fields below are accessed by users of vpbe_device. Not the - * ones above - */ - - /* current output */ - int current_out_index; - /* lock used by caller to do atomic operation on vpbe device */ - /* current timings set in the controller */ - struct vpbe_enc_mode_info current_timings; - /* venc sub device */ - struct v4l2_subdev *venc; - /* device operations below */ - struct vpbe_device_ops ops; -}; - -#endif diff --git a/include/media/davinci/vpbe_display.h b/include/media/davinci/vpbe_display.h deleted file mode 100644 index d8751ea926a2..000000000000 --- a/include/media/davinci/vpbe_display.h +++ /dev/null @@ -1,122 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Incorporated - https://www.ti.com/ - */ -#ifndef VPBE_DISPLAY_H -#define VPBE_DISPLAY_H - -/* Header files */ -#include -#include -#include -#include -#include -#include -#include -#include - -#define VPBE_DISPLAY_MAX_DEVICES 2 - -enum vpbe_display_device_id { - VPBE_DISPLAY_DEVICE_0, - VPBE_DISPLAY_DEVICE_1 -}; - -#define VPBE_DISPLAY_DRV_NAME "vpbe-display" - -#define VPBE_DISPLAY_MAJOR_RELEASE 1 -#define VPBE_DISPLAY_MINOR_RELEASE 0 -#define VPBE_DISPLAY_BUILD 1 -#define VPBE_DISPLAY_VERSION_CODE ((VPBE_DISPLAY_MAJOR_RELEASE << 16) | \ - (VPBE_DISPLAY_MINOR_RELEASE << 8) | \ - VPBE_DISPLAY_BUILD) - -#define VPBE_DISPLAY_VALID_FIELD(field) ((V4L2_FIELD_NONE == field) || \ - (V4L2_FIELD_ANY == field) || (V4L2_FIELD_INTERLACED == field)) - -/* Exp ratio numerator and denominator constants */ -#define VPBE_DISPLAY_H_EXP_RATIO_N 9 -#define VPBE_DISPLAY_H_EXP_RATIO_D 8 -#define VPBE_DISPLAY_V_EXP_RATIO_N 6 -#define VPBE_DISPLAY_V_EXP_RATIO_D 5 - -/* Zoom multiplication factor */ -#define VPBE_DISPLAY_ZOOM_4X 4 -#define VPBE_DISPLAY_ZOOM_2X 2 - -/* Structures */ -struct display_layer_info { - int enable; - /* Layer ID used by Display Manager */ - enum osd_layer id; - struct osd_layer_config config; - enum osd_zoom_factor h_zoom; - enum osd_zoom_factor v_zoom; - enum osd_h_exp_ratio h_exp; - enum osd_v_exp_ratio v_exp; -}; - -struct vpbe_disp_buffer { - struct vb2_v4l2_buffer vb; - struct list_head list; -}; - -/* vpbe display object structure */ -struct vpbe_layer { - /* Pointer to the vpbe_display */ - struct vpbe_display *disp_dev; - /* Pointer pointing to current v4l2_buffer */ - struct vpbe_disp_buffer *cur_frm; - /* Pointer pointing to next v4l2_buffer */ - struct vpbe_disp_buffer *next_frm; - /* vb2 specific parameters - * Buffer queue used in vb2 - */ - struct vb2_queue buffer_queue; - /* Queue of filled frames */ - struct list_head dma_queue; - /* Used for video buffer handling */ - spinlock_t irqlock; - /* V4l2 specific parameters */ - /* Identifies video device for this layer */ - struct video_device video_dev; - /* Used to store pixel format */ - struct v4l2_pix_format pix_fmt; - enum v4l2_field buf_field; - /* Video layer configuration params */ - struct display_layer_info layer_info; - /* vpbe specific parameters - * enable window for display - */ - unsigned char window_enable; - /* number of open instances of the layer */ - unsigned int usrs; - /* Indicates id of the field which is being displayed */ - unsigned int field_id; - /* Identifies device object */ - enum vpbe_display_device_id device_id; - /* facilitation of ioctl ops lock by v4l2*/ - struct mutex opslock; - u8 layer_first_int; -}; - -/* vpbe device structure */ -struct vpbe_display { - /* layer specific parameters */ - /* lock for isr updates to buf layers*/ - spinlock_t dma_queue_lock; - /* C-Plane offset from start of y-plane */ - unsigned int cbcr_ofst; - struct vpbe_layer *dev[VPBE_DISPLAY_MAX_DEVICES]; - struct vpbe_device *vpbe_dev; - struct osd_state *osd_device; -}; - -struct buf_config_params { - unsigned char min_numbuffers; - unsigned char numbuffers[VPBE_DISPLAY_MAX_DEVICES]; - unsigned int min_bufsize[VPBE_DISPLAY_MAX_DEVICES]; - unsigned int layer_bufsize[VPBE_DISPLAY_MAX_DEVICES]; -}; - -#endif /* VPBE_DISPLAY_H */ diff --git a/include/media/davinci/vpbe_osd.h b/include/media/davinci/vpbe_osd.h deleted file mode 100644 index a4fc4f2a56fb..000000000000 --- a/include/media/davinci/vpbe_osd.h +++ /dev/null @@ -1,382 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2007-2009 Texas Instruments Inc - * Copyright (C) 2007 MontaVista Software, Inc. - * - * Andy Lowe (alowe@mvista.com), MontaVista Software - * - Initial version - * Murali Karicheri (mkaricheri@gmail.com), Texas Instruments Ltd. - * - ported to sub device interface - */ -#ifndef _OSD_H -#define _OSD_H - -#include - -#define DM644X_VPBE_OSD_SUBDEV_NAME "dm644x,vpbe-osd" -#define DM365_VPBE_OSD_SUBDEV_NAME "dm365,vpbe-osd" -#define DM355_VPBE_OSD_SUBDEV_NAME "dm355,vpbe-osd" - -/** - * enum osd_layer - * @WIN_OSD0: On-Screen Display Window 0 - * @WIN_VID0: Video Window 0 - * @WIN_OSD1: On-Screen Display Window 1 - * @WIN_VID1: Video Window 1 - * - * Description: - * An enumeration of the osd display layers. - */ -enum osd_layer { - WIN_OSD0, - WIN_VID0, - WIN_OSD1, - WIN_VID1, -}; - -/** - * enum osd_win_layer - * @OSDWIN_OSD0: On-Screen Display Window 0 - * @OSDWIN_OSD1: On-Screen Display Window 1 - * - * Description: - * An enumeration of the OSD Window layers. - */ -enum osd_win_layer { - OSDWIN_OSD0, - OSDWIN_OSD1, -}; - -/** - * enum osd_pix_format - * @PIXFMT_1BPP: 1-bit-per-pixel bitmap - * @PIXFMT_2BPP: 2-bits-per-pixel bitmap - * @PIXFMT_4BPP: 4-bits-per-pixel bitmap - * @PIXFMT_8BPP: 8-bits-per-pixel bitmap - * @PIXFMT_RGB565: 16-bits-per-pixel RGB565 - * @PIXFMT_YCBCRI: YUV 4:2:2 - * @PIXFMT_RGB888: 24-bits-per-pixel RGB888 - * @PIXFMT_YCRCBI: YUV 4:2:2 with chroma swap - * @PIXFMT_NV12: YUV 4:2:0 planar - * @PIXFMT_OSD_ATTR: OSD Attribute Window pixel format (4bpp) - * - * Description: - * An enumeration of the DaVinci pixel formats. - */ -enum osd_pix_format { - PIXFMT_1BPP = 0, - PIXFMT_2BPP, - PIXFMT_4BPP, - PIXFMT_8BPP, - PIXFMT_RGB565, - PIXFMT_YCBCRI, - PIXFMT_RGB888, - PIXFMT_YCRCBI, - PIXFMT_NV12, - PIXFMT_OSD_ATTR, -}; - -/** - * enum osd_h_exp_ratio - * @H_EXP_OFF: no expansion (1/1) - * @H_EXP_9_OVER_8: 9/8 expansion ratio - * @H_EXP_3_OVER_2: 3/2 expansion ratio - * - * Description: - * An enumeration of the available horizontal expansion ratios. - */ -enum osd_h_exp_ratio { - H_EXP_OFF, - H_EXP_9_OVER_8, - H_EXP_3_OVER_2, -}; - -/** - * enum osd_v_exp_ratio - * @V_EXP_OFF: no expansion (1/1) - * @V_EXP_6_OVER_5: 6/5 expansion ratio - * - * Description: - * An enumeration of the available vertical expansion ratios. - */ -enum osd_v_exp_ratio { - V_EXP_OFF, - V_EXP_6_OVER_5, -}; - -/** - * enum osd_zoom_factor - * @ZOOM_X1: no zoom (x1) - * @ZOOM_X2: x2 zoom - * @ZOOM_X4: x4 zoom - * - * Description: - * An enumeration of the available zoom factors. - */ -enum osd_zoom_factor { - ZOOM_X1, - ZOOM_X2, - ZOOM_X4, -}; - -/** - * enum osd_clut - * @ROM_CLUT: ROM CLUT - * @RAM_CLUT: RAM CLUT - * - * Description: - * An enumeration of the available Color Lookup Tables (CLUTs). - */ -enum osd_clut { - ROM_CLUT, - RAM_CLUT, -}; - -/** - * enum osd_rom_clut - * @ROM_CLUT0: Macintosh CLUT - * @ROM_CLUT1: CLUT from DM270 and prior devices - * - * Description: - * An enumeration of the ROM Color Lookup Table (CLUT) options. - */ -enum osd_rom_clut { - ROM_CLUT0, - ROM_CLUT1, -}; - -/** - * enum osd_blending_factor - * @OSD_0_VID_8: OSD pixels are fully transparent - * @OSD_1_VID_7: OSD pixels contribute 1/8, video pixels contribute 7/8 - * @OSD_2_VID_6: OSD pixels contribute 2/8, video pixels contribute 6/8 - * @OSD_3_VID_5: OSD pixels contribute 3/8, video pixels contribute 5/8 - * @OSD_4_VID_4: OSD pixels contribute 4/8, video pixels contribute 4/8 - * @OSD_5_VID_3: OSD pixels contribute 5/8, video pixels contribute 3/8 - * @OSD_6_VID_2: OSD pixels contribute 6/8, video pixels contribute 2/8 - * @OSD_8_VID_0: OSD pixels are fully opaque - * - * Description: - * An enumeration of the DaVinci pixel blending factor options. - */ -enum osd_blending_factor { - OSD_0_VID_8, - OSD_1_VID_7, - OSD_2_VID_6, - OSD_3_VID_5, - OSD_4_VID_4, - OSD_5_VID_3, - OSD_6_VID_2, - OSD_8_VID_0, -}; - -/** - * enum osd_blink_interval - * @BLINK_X1: blink interval is 1 vertical refresh cycle - * @BLINK_X2: blink interval is 2 vertical refresh cycles - * @BLINK_X3: blink interval is 3 vertical refresh cycles - * @BLINK_X4: blink interval is 4 vertical refresh cycles - * - * Description: - * An enumeration of the DaVinci pixel blinking interval options. - */ -enum osd_blink_interval { - BLINK_X1, - BLINK_X2, - BLINK_X3, - BLINK_X4, -}; - -/** - * enum osd_cursor_h_width - * @H_WIDTH_1: horizontal line width is 1 pixel - * @H_WIDTH_4: horizontal line width is 4 pixels - * @H_WIDTH_8: horizontal line width is 8 pixels - * @H_WIDTH_12: horizontal line width is 12 pixels - * @H_WIDTH_16: horizontal line width is 16 pixels - * @H_WIDTH_20: horizontal line width is 20 pixels - * @H_WIDTH_24: horizontal line width is 24 pixels - * @H_WIDTH_28: horizontal line width is 28 pixels - */ -enum osd_cursor_h_width { - H_WIDTH_1, - H_WIDTH_4, - H_WIDTH_8, - H_WIDTH_12, - H_WIDTH_16, - H_WIDTH_20, - H_WIDTH_24, - H_WIDTH_28, -}; - -/** - * enum osd_cursor_v_width - * @V_WIDTH_1: vertical line width is 1 line - * @V_WIDTH_2: vertical line width is 2 lines - * @V_WIDTH_4: vertical line width is 4 lines - * @V_WIDTH_6: vertical line width is 6 lines - * @V_WIDTH_8: vertical line width is 8 lines - * @V_WIDTH_10: vertical line width is 10 lines - * @V_WIDTH_12: vertical line width is 12 lines - * @V_WIDTH_14: vertical line width is 14 lines - */ -enum osd_cursor_v_width { - V_WIDTH_1, - V_WIDTH_2, - V_WIDTH_4, - V_WIDTH_6, - V_WIDTH_8, - V_WIDTH_10, - V_WIDTH_12, - V_WIDTH_14, -}; - -/** - * struct osd_cursor_config - * @xsize: horizontal size in pixels - * @ysize: vertical size in lines - * @xpos: horizontal offset in pixels from the left edge of the display - * @ypos: vertical offset in lines from the top of the display - * @interlaced: Non-zero if the display is interlaced, or zero otherwise - * @h_width: horizontal line width - * @v_width: vertical line width - * @clut: the CLUT selector (ROM or RAM) for the cursor color - * @clut_index: an index into the CLUT for the cursor color - * - * Description: - * A structure describing the configuration parameters of the hardware - * rectangular cursor. - */ -struct osd_cursor_config { - unsigned xsize; - unsigned ysize; - unsigned xpos; - unsigned ypos; - int interlaced; - enum osd_cursor_h_width h_width; - enum osd_cursor_v_width v_width; - enum osd_clut clut; - unsigned char clut_index; -}; - -/** - * struct osd_layer_config - * @pixfmt: pixel format - * @line_length: offset in bytes between start of each line in memory - * @xsize: number of horizontal pixels displayed per line - * @ysize: number of lines displayed - * @xpos: horizontal offset in pixels from the left edge of the display - * @ypos: vertical offset in lines from the top of the display - * @interlaced: Non-zero if the display is interlaced, or zero otherwise - * - * Description: - * A structure describing the configuration parameters of an On-Screen Display - * (OSD) or video layer related to how the image is stored in memory. - * @line_length must be a multiple of the cache line size (32 bytes). - */ -struct osd_layer_config { - enum osd_pix_format pixfmt; - unsigned line_length; - unsigned xsize; - unsigned ysize; - unsigned xpos; - unsigned ypos; - int interlaced; -}; - -/* parameters that apply on a per-window (OSD or video) basis */ -struct osd_window_state { - int is_allocated; - int is_enabled; - unsigned long fb_base_phys; - enum osd_zoom_factor h_zoom; - enum osd_zoom_factor v_zoom; - struct osd_layer_config lconfig; -}; - -/* parameters that apply on a per-OSD-window basis */ -struct osd_osdwin_state { - enum osd_clut clut; - enum osd_blending_factor blend; - int colorkey_blending; - unsigned colorkey; - int rec601_attenuation; - /* index is pixel value */ - unsigned char palette_map[16]; -}; - -/* hardware rectangular cursor parameters */ -struct osd_cursor_state { - int is_enabled; - struct osd_cursor_config config; -}; - -struct osd_state; - -struct vpbe_osd_ops { - int (*initialize)(struct osd_state *sd); - int (*request_layer)(struct osd_state *sd, enum osd_layer layer); - void (*release_layer)(struct osd_state *sd, enum osd_layer layer); - int (*enable_layer)(struct osd_state *sd, enum osd_layer layer, - int otherwin); - void (*disable_layer)(struct osd_state *sd, enum osd_layer layer); - int (*set_layer_config)(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig); - void (*get_layer_config)(struct osd_state *sd, enum osd_layer layer, - struct osd_layer_config *lconfig); - void (*start_layer)(struct osd_state *sd, enum osd_layer layer, - unsigned long fb_base_phys, - unsigned long cbcr_ofst); - void (*set_left_margin)(struct osd_state *sd, u32 val); - void (*set_top_margin)(struct osd_state *sd, u32 val); - void (*set_interpolation_filter)(struct osd_state *sd, int filter); - int (*set_vid_expansion)(struct osd_state *sd, - enum osd_h_exp_ratio h_exp, - enum osd_v_exp_ratio v_exp); - void (*get_vid_expansion)(struct osd_state *sd, - enum osd_h_exp_ratio *h_exp, - enum osd_v_exp_ratio *v_exp); - void (*set_zoom)(struct osd_state *sd, enum osd_layer layer, - enum osd_zoom_factor h_zoom, - enum osd_zoom_factor v_zoom); -}; - -struct osd_state { - enum vpbe_version vpbe_type; - spinlock_t lock; - struct device *dev; - dma_addr_t osd_base_phys; - void __iomem *osd_base; - unsigned long osd_size; - /* 1-->the isr will toggle the VID0 ping-pong buffer */ - int pingpong; - int interpolation_filter; - int field_inversion; - enum osd_h_exp_ratio osd_h_exp; - enum osd_v_exp_ratio osd_v_exp; - enum osd_h_exp_ratio vid_h_exp; - enum osd_v_exp_ratio vid_v_exp; - enum osd_clut backg_clut; - unsigned backg_clut_index; - enum osd_rom_clut rom_clut; - int is_blinking; - /* attribute window blinking enabled */ - enum osd_blink_interval blink; - /* YCbCrI or YCrCbI */ - enum osd_pix_format yc_pixfmt; - /* columns are Y, Cb, Cr */ - unsigned char clut_ram[256][3]; - struct osd_cursor_state cursor; - /* OSD0, VID0, OSD1, VID1 */ - struct osd_window_state win[4]; - /* OSD0, OSD1 */ - struct osd_osdwin_state osdwin[2]; - /* OSD device Operations */ - struct vpbe_osd_ops ops; -}; - -struct osd_platform_data { - int field_inv_wa_enable; -}; - -#endif diff --git a/include/media/davinci/vpbe_types.h b/include/media/davinci/vpbe_types.h deleted file mode 100644 index 6015cda235cc..000000000000 --- a/include/media/davinci/vpbe_types.h +++ /dev/null @@ -1,74 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#ifndef _VPBE_TYPES_H -#define _VPBE_TYPES_H - -enum vpbe_version { - VPBE_VERSION_1 = 1, - VPBE_VERSION_2, - VPBE_VERSION_3, -}; - -/* vpbe_timing_type - Timing types used in vpbe device */ -enum vpbe_enc_timings_type { - VPBE_ENC_STD = 0x1, - VPBE_ENC_DV_TIMINGS = 0x4, - /* Used when set timings through FB device interface */ - VPBE_ENC_TIMINGS_INVALID = 0x8, -}; - -/* - * struct vpbe_enc_mode_info - * @name: ptr to name string of the standard, "NTSC", "PAL" etc - * @std: standard or non-standard mode. 1 - standard, 0 - nonstandard - * @interlaced: 1 - interlaced, 0 - non interlaced/progressive - * @xres: x or horizontal resolution of the display - * @yres: y or vertical resolution of the display - * @fps: frame per second - * @left_margin: left margin of the display - * @right_margin: right margin of the display - * @upper_margin: upper margin of the display - * @lower_margin: lower margin of the display - * @hsync_len: h-sync length - * @vsync_len: v-sync length - * @flags: bit field: bit usage is documented below - * - * Description: - * Structure holding timing and resolution information of a standard. - * Used by vpbe_device to set required non-standard timing in the - * venc when lcd controller output is connected to a external encoder. - * A table of timings is maintained in vpbe device to set this in - * venc when external encoder is connected to lcd controller output. - * Encoder may provide a g_dv_timings() API to override these values - * as needed. - * - * Notes - * ------ - * if_type should be used only by encoder manager and encoder. - * flags usage - * b0 (LSB) - hsync polarity, 0 - negative, 1 - positive - * b1 - vsync polarity, 0 - negative, 1 - positive - * b2 - field id polarity, 0 - negative, 1 - positive - */ -struct vpbe_enc_mode_info { - unsigned char *name; - enum vpbe_enc_timings_type timings_type; - v4l2_std_id std_id; - struct v4l2_dv_timings dv_timings; - unsigned int interlaced; - unsigned int xres; - unsigned int yres; - struct v4l2_fract aspect; - struct v4l2_fract fps; - unsigned int left_margin; - unsigned int right_margin; - unsigned int upper_margin; - unsigned int lower_margin; - unsigned int hsync_len; - unsigned int vsync_len; - unsigned int flags; -}; - -#endif diff --git a/include/media/davinci/vpbe_venc.h b/include/media/davinci/vpbe_venc.h deleted file mode 100644 index 93cf6a5fb49d..000000000000 --- a/include/media/davinci/vpbe_venc.h +++ /dev/null @@ -1,37 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2010 Texas Instruments Inc - */ -#ifndef _VPBE_VENC_H -#define _VPBE_VENC_H - -#include -#include - -#define DM644X_VPBE_VENC_SUBDEV_NAME "dm644x,vpbe-venc" -#define DM365_VPBE_VENC_SUBDEV_NAME "dm365,vpbe-venc" -#define DM355_VPBE_VENC_SUBDEV_NAME "dm355,vpbe-venc" - -/* venc events */ -#define VENC_END_OF_FRAME BIT(0) -#define VENC_FIRST_FIELD BIT(1) -#define VENC_SECOND_FIELD BIT(2) - -struct venc_platform_data { - int (*setup_pinmux)(u32 if_type, int field); - int (*setup_clock)(enum vpbe_enc_timings_type type, - unsigned int pixclock); - int (*setup_if_config)(u32 pixcode); - /* Number of LCD outputs supported */ - int num_lcd_outputs; - struct vpbe_if_params *lcd_if_params; -}; - -enum venc_ioctls { - VENC_GET_FLD = 1, -}; - -/* exported functions */ -struct v4l2_subdev *venc_sub_dev_init(struct v4l2_device *v4l2_dev, - const char *venc_name); -#endif diff --git a/include/media/davinci/vpss.h b/include/media/davinci/vpss.h deleted file mode 100644 index 315fa77e238c..000000000000 --- a/include/media/davinci/vpss.h +++ /dev/null @@ -1,111 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-or-later */ -/* - * Copyright (C) 2009 Texas Instruments Inc - * - * vpss - video processing subsystem module header file. - * - * Include this header file if a driver needs to configure vpss system - * module. It exports a set of library functions for video drivers to - * configure vpss system module functions such as clock enable/disable, - * vpss interrupt mux to arm, and other common vpss system module - * functions. - */ -#ifndef _VPSS_H -#define _VPSS_H - -/* selector for ccdc input selection on DM355 */ -enum vpss_ccdc_source_sel { - VPSS_CCDCIN, - VPSS_HSSIIN, - VPSS_PGLPBK, /* for DM365 only */ - VPSS_CCDCPG /* for DM365 only */ -}; - -struct vpss_sync_pol { - unsigned int ccdpg_hdpol:1; - unsigned int ccdpg_vdpol:1; -}; - -struct vpss_pg_frame_size { - short hlpfr; - short pplen; -}; - -/* Used for enable/disable VPSS Clock */ -enum vpss_clock_sel { - /* DM355/DM365 */ - VPSS_CCDC_CLOCK, - VPSS_IPIPE_CLOCK, - VPSS_H3A_CLOCK, - VPSS_CFALD_CLOCK, - /* - * When using VPSS_VENC_CLOCK_SEL in vpss_enable_clock() api - * following applies:- - * en = 0 selects ENC_CLK - * en = 1 selects ENC_CLK/2 - */ - VPSS_VENC_CLOCK_SEL, - VPSS_VPBE_CLOCK, - /* DM365 only clocks */ - VPSS_IPIPEIF_CLOCK, - VPSS_RSZ_CLOCK, - VPSS_BL_CLOCK, - /* - * When using VPSS_PCLK_INTERNAL in vpss_enable_clock() api - * following applies:- - * en = 0 disable internal PCLK - * en = 1 enables internal PCLK - */ - VPSS_PCLK_INTERNAL, - /* - * When using VPSS_PSYNC_CLOCK_SEL in vpss_enable_clock() api - * following applies:- - * en = 0 enables MMR clock - * en = 1 enables VPSS clock - */ - VPSS_PSYNC_CLOCK_SEL, - VPSS_LDC_CLOCK_SEL, - VPSS_OSD_CLOCK_SEL, - VPSS_FDIF_CLOCK, - VPSS_LDC_CLOCK -}; - -/* select input to ccdc on dm355 */ -int vpss_select_ccdc_source(enum vpss_ccdc_source_sel src_sel); -/* enable/disable a vpss clock, 0 - success, -1 - failure */ -int vpss_enable_clock(enum vpss_clock_sel clock_sel, int en); -/* set sync polarity, only for DM365*/ -void dm365_vpss_set_sync_pol(struct vpss_sync_pol); -/* set the PG_FRAME_SIZE register, only for DM365 */ -void dm365_vpss_set_pg_frame_size(struct vpss_pg_frame_size); - -/* wbl reset for dm644x */ -enum vpss_wbl_sel { - VPSS_PCR_AEW_WBL_0 = 16, - VPSS_PCR_AF_WBL_0, - VPSS_PCR_RSZ4_WBL_0, - VPSS_PCR_RSZ3_WBL_0, - VPSS_PCR_RSZ2_WBL_0, - VPSS_PCR_RSZ1_WBL_0, - VPSS_PCR_PREV_WBL_0, - VPSS_PCR_CCDC_WBL_O, -}; -/* clear wbl overflow flag for DM6446 */ -int vpss_clear_wbl_overflow(enum vpss_wbl_sel wbl_sel); - -/* set sync polarity*/ -void vpss_set_sync_pol(struct vpss_sync_pol sync); -/* set the PG_FRAME_SIZE register */ -void vpss_set_pg_frame_size(struct vpss_pg_frame_size frame_size); -/* - * vpss_check_and_clear_interrupt - check and clear interrupt - * @irq - common enumerator for IRQ - * - * Following return values used:- - * 0 - interrupt occurred and cleared - * 1 - interrupt not occurred - * 2 - interrupt status not available - */ -int vpss_dma_complete_interrupt(void); - -#endif