[03/17] mmc: remove cns3xxx driver
Commit Message
From: Arnd Bergmann <arnd@arndb.de>
The cns3xxx platform is gone, so this driver is now orphaned.
Cc: Krzysztof Halasa <khalasa@piap.pl>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/mmc/host/Kconfig | 11 ---
drivers/mmc/host/Makefile | 1 -
drivers/mmc/host/sdhci-cns3xxx.c | 113 -------------------------------
3 files changed, 125 deletions(-)
delete mode 100644 drivers/mmc/host/sdhci-cns3xxx.c
Comments
On Wed, 19 Oct 2022 at 17:06, Arnd Bergmann <arnd@kernel.org> wrote:
>
> From: Arnd Bergmann <arnd@arndb.de>
>
> The cns3xxx platform is gone, so this driver is now orphaned.
>
> Cc: Krzysztof Halasa <khalasa@piap.pl>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Kind regards
Uffe
> ---
> drivers/mmc/host/Kconfig | 11 ---
> drivers/mmc/host/Makefile | 1 -
> drivers/mmc/host/sdhci-cns3xxx.c | 113 -------------------------------
> 3 files changed, 125 deletions(-)
> delete mode 100644 drivers/mmc/host/sdhci-cns3xxx.c
>
> diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig
> index f324daadaf70..1c5b1c48a230 100644
> --- a/drivers/mmc/host/Kconfig
> +++ b/drivers/mmc/host/Kconfig
> @@ -253,17 +253,6 @@ config MMC_SDHCI_CADENCE
>
> If unsure, say N.
>
> -config MMC_SDHCI_CNS3XXX
> - tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
> - depends on ARCH_CNS3XXX || COMPILE_TEST
> - depends on MMC_SDHCI_PLTFM
> - help
> - This selects the SDHCI support for CNS3xxx System-on-Chip devices.
> -
> - If you have a controller with this interface, say Y or M here.
> -
> - If unsure, say N.
> -
> config MMC_SDHCI_ESDHC_MCF
> tristate "SDHCI support for the Freescale eSDHC ColdFire controller"
> depends on M5441x
> diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile
> index 4e4ceb32c4b4..7bea77c28b7e 100644
> --- a/drivers/mmc/host/Makefile
> +++ b/drivers/mmc/host/Makefile
> @@ -77,7 +77,6 @@ obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
>
> obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
> obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
> -obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
> obj-$(CONFIG_MMC_SDHCI_ESDHC_MCF) += sdhci-esdhc-mcf.o
> obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
> obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o
> diff --git a/drivers/mmc/host/sdhci-cns3xxx.c b/drivers/mmc/host/sdhci-cns3xxx.c
> deleted file mode 100644
> index 2a29c7a4f308..000000000000
> --- a/drivers/mmc/host/sdhci-cns3xxx.c
> +++ /dev/null
> @@ -1,113 +0,0 @@
> -// SPDX-License-Identifier: GPL-2.0-only
> -/*
> - * SDHCI support for CNS3xxx SoC
> - *
> - * Copyright 2008 Cavium Networks
> - * Copyright 2010 MontaVista Software, LLC.
> - *
> - * Authors: Scott Shu
> - * Anton Vorontsov <avorontsov@mvista.com>
> - */
> -
> -#include <linux/delay.h>
> -#include <linux/device.h>
> -#include <linux/mmc/host.h>
> -#include <linux/module.h>
> -#include "sdhci-pltfm.h"
> -
> -static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
> -{
> - return 150000000;
> -}
> -
> -static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
> -{
> - struct device *dev = mmc_dev(host->mmc);
> - int div = 1;
> - u16 clk;
> - unsigned long timeout;
> -
> - host->mmc->actual_clock = 0;
> -
> - sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
> -
> - if (clock == 0)
> - return;
> -
> - while (host->max_clk / div > clock) {
> - /*
> - * On CNS3xxx divider grows linearly up to 4, and then
> - * exponentially up to 256.
> - */
> - if (div < 4)
> - div += 1;
> - else if (div < 256)
> - div *= 2;
> - else
> - break;
> - }
> -
> - dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
> - clock, host->max_clk / div);
> -
> - /* Divide by 3 is special. */
> - if (div != 3)
> - div >>= 1;
> -
> - clk = div << SDHCI_DIVIDER_SHIFT;
> - clk |= SDHCI_CLOCK_INT_EN;
> - sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> -
> - timeout = 20;
> - while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
> - & SDHCI_CLOCK_INT_STABLE)) {
> - if (timeout == 0) {
> - dev_warn(dev, "clock is unstable");
> - break;
> - }
> - timeout--;
> - mdelay(1);
> - }
> -
> - clk |= SDHCI_CLOCK_CARD_EN;
> - sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
> -}
> -
> -static const struct sdhci_ops sdhci_cns3xxx_ops = {
> - .get_max_clock = sdhci_cns3xxx_get_max_clk,
> - .set_clock = sdhci_cns3xxx_set_clock,
> - .set_bus_width = sdhci_set_bus_width,
> - .reset = sdhci_reset,
> - .set_uhs_signaling = sdhci_set_uhs_signaling,
> -};
> -
> -static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
> - .ops = &sdhci_cns3xxx_ops,
> - .quirks = SDHCI_QUIRK_BROKEN_DMA |
> - SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
> - SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
> - SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
> - SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
> -};
> -
> -static int sdhci_cns3xxx_probe(struct platform_device *pdev)
> -{
> - return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0);
> -}
> -
> -static struct platform_driver sdhci_cns3xxx_driver = {
> - .driver = {
> - .name = "sdhci-cns3xxx",
> - .probe_type = PROBE_PREFER_ASYNCHRONOUS,
> - .pm = &sdhci_pltfm_pmops,
> - },
> - .probe = sdhci_cns3xxx_probe,
> - .remove = sdhci_pltfm_unregister,
> -};
> -
> -module_platform_driver(sdhci_cns3xxx_driver);
> -
> -MODULE_DESCRIPTION("SDHCI driver for CNS3xxx");
> -MODULE_AUTHOR("Scott Shu, "
> - "Anton Vorontsov <avorontsov@mvista.com>");
> -MODULE_LICENSE("GPL v2");
> --
> 2.29.2
>
@@ -253,17 +253,6 @@ config MMC_SDHCI_CADENCE
If unsure, say N.
-config MMC_SDHCI_CNS3XXX
- tristate "SDHCI support on the Cavium Networks CNS3xxx SoC"
- depends on ARCH_CNS3XXX || COMPILE_TEST
- depends on MMC_SDHCI_PLTFM
- help
- This selects the SDHCI support for CNS3xxx System-on-Chip devices.
-
- If you have a controller with this interface, say Y or M here.
-
- If unsure, say N.
-
config MMC_SDHCI_ESDHC_MCF
tristate "SDHCI support for the Freescale eSDHC ColdFire controller"
depends on M5441x
@@ -77,7 +77,6 @@ obj-$(CONFIG_MMC_REALTEK_USB) += rtsx_usb_sdmmc.o
obj-$(CONFIG_MMC_SDHCI_PLTFM) += sdhci-pltfm.o
obj-$(CONFIG_MMC_SDHCI_CADENCE) += sdhci-cadence.o
-obj-$(CONFIG_MMC_SDHCI_CNS3XXX) += sdhci-cns3xxx.o
obj-$(CONFIG_MMC_SDHCI_ESDHC_MCF) += sdhci-esdhc-mcf.o
obj-$(CONFIG_MMC_SDHCI_ESDHC_IMX) += sdhci-esdhc-imx.o
obj-$(CONFIG_MMC_SDHCI_DOVE) += sdhci-dove.o
deleted file mode 100644
@@ -1,113 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * SDHCI support for CNS3xxx SoC
- *
- * Copyright 2008 Cavium Networks
- * Copyright 2010 MontaVista Software, LLC.
- *
- * Authors: Scott Shu
- * Anton Vorontsov <avorontsov@mvista.com>
- */
-
-#include <linux/delay.h>
-#include <linux/device.h>
-#include <linux/mmc/host.h>
-#include <linux/module.h>
-#include "sdhci-pltfm.h"
-
-static unsigned int sdhci_cns3xxx_get_max_clk(struct sdhci_host *host)
-{
- return 150000000;
-}
-
-static void sdhci_cns3xxx_set_clock(struct sdhci_host *host, unsigned int clock)
-{
- struct device *dev = mmc_dev(host->mmc);
- int div = 1;
- u16 clk;
- unsigned long timeout;
-
- host->mmc->actual_clock = 0;
-
- sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
-
- if (clock == 0)
- return;
-
- while (host->max_clk / div > clock) {
- /*
- * On CNS3xxx divider grows linearly up to 4, and then
- * exponentially up to 256.
- */
- if (div < 4)
- div += 1;
- else if (div < 256)
- div *= 2;
- else
- break;
- }
-
- dev_dbg(dev, "desired SD clock: %d, actual: %d\n",
- clock, host->max_clk / div);
-
- /* Divide by 3 is special. */
- if (div != 3)
- div >>= 1;
-
- clk = div << SDHCI_DIVIDER_SHIFT;
- clk |= SDHCI_CLOCK_INT_EN;
- sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-
- timeout = 20;
- while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL))
- & SDHCI_CLOCK_INT_STABLE)) {
- if (timeout == 0) {
- dev_warn(dev, "clock is unstable");
- break;
- }
- timeout--;
- mdelay(1);
- }
-
- clk |= SDHCI_CLOCK_CARD_EN;
- sdhci_writew(host, clk, SDHCI_CLOCK_CONTROL);
-}
-
-static const struct sdhci_ops sdhci_cns3xxx_ops = {
- .get_max_clock = sdhci_cns3xxx_get_max_clk,
- .set_clock = sdhci_cns3xxx_set_clock,
- .set_bus_width = sdhci_set_bus_width,
- .reset = sdhci_reset,
- .set_uhs_signaling = sdhci_set_uhs_signaling,
-};
-
-static const struct sdhci_pltfm_data sdhci_cns3xxx_pdata = {
- .ops = &sdhci_cns3xxx_ops,
- .quirks = SDHCI_QUIRK_BROKEN_DMA |
- SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK |
- SDHCI_QUIRK_INVERTED_WRITE_PROTECT |
- SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN |
- SDHCI_QUIRK_BROKEN_TIMEOUT_VAL,
-};
-
-static int sdhci_cns3xxx_probe(struct platform_device *pdev)
-{
- return sdhci_pltfm_register(pdev, &sdhci_cns3xxx_pdata, 0);
-}
-
-static struct platform_driver sdhci_cns3xxx_driver = {
- .driver = {
- .name = "sdhci-cns3xxx",
- .probe_type = PROBE_PREFER_ASYNCHRONOUS,
- .pm = &sdhci_pltfm_pmops,
- },
- .probe = sdhci_cns3xxx_probe,
- .remove = sdhci_pltfm_unregister,
-};
-
-module_platform_driver(sdhci_cns3xxx_driver);
-
-MODULE_DESCRIPTION("SDHCI driver for CNS3xxx");
-MODULE_AUTHOR("Scott Shu, "
- "Anton Vorontsov <avorontsov@mvista.com>");
-MODULE_LICENSE("GPL v2");