@@ -40,15 +40,6 @@ config FB_OMAP_LCD_MIPID
the Mobile Industry Processor Interface DBI-C/DCS
specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
-config FB_OMAP_LCD_H3
- bool "TPS65010 LCD controller on OMAP-H3"
- depends on MACH_OMAP_H3 || COMPILE_TEST
- depends on TPS65010=y
- default y
- help
- Say Y here if you want to have support for the LCD on the
- H3 board.
-
config FB_OMAP_DMA_TUNE
bool "Set DMA SDRAM access priority high"
depends on FB_OMAP
@@ -17,16 +17,10 @@ objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
-lcds-y$(CONFIG_FB_OMAP_LCD_H3) += lcd_h3.o
lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
-lcds-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
-lcds-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
-lcds-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
-lcds-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
-lcds-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
omapfb-objs := $(objs-yy)
deleted file mode 100644
@@ -1,82 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LCD panel support for the TI OMAP H3 board
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/mfd/tps65010.h>
-#include <linux/gpio.h>
-
-#include "omapfb.h"
-
-#define MODULE_NAME "omapfb-lcd_h3"
-
-static int h3_panel_enable(struct lcd_panel *panel)
-{
- int r = 0;
-
- /* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
- r = tps65010_set_gpio_out_value(GPIO1, HIGH);
- if (!r)
- r = tps65010_set_gpio_out_value(GPIO2, HIGH);
- if (r)
- pr_err(MODULE_NAME ": Unable to turn on LCD panel\n");
-
- return r;
-}
-
-static void h3_panel_disable(struct lcd_panel *panel)
-{
- int r = 0;
-
- /* GPIO1 and GPIO2 of TPS65010 send LCD_ENBKL and LCD_ENVDD signals */
- r = tps65010_set_gpio_out_value(GPIO1, LOW);
- if (!r)
- tps65010_set_gpio_out_value(GPIO2, LOW);
- if (r)
- pr_err(MODULE_NAME ": Unable to turn off LCD panel\n");
-}
-
-static struct lcd_panel h3_panel = {
- .name = "h3",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .data_lines = 16,
- .bpp = 16,
- .x_res = 240,
- .y_res = 320,
- .pixel_clock = 12000,
- .hsw = 12,
- .hfp = 14,
- .hbp = 72 - 12,
- .vsw = 1,
- .vfp = 1,
- .vbp = 0,
- .pcd = 0,
-
- .enable = h3_panel_enable,
- .disable = h3_panel_disable,
-};
-
-static int h3_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&h3_panel);
- return 0;
-}
-
-static struct platform_driver h3_panel_driver = {
- .probe = h3_panel_probe,
- .driver = {
- .name = "lcd_h3",
- },
-};
-
-module_platform_driver(h3_panel_driver);
-
-MODULE_AUTHOR("Imre Deak");
-MODULE_DESCRIPTION("LCD panel support for the TI OMAP H3 board");
-MODULE_LICENSE("GPL");
deleted file mode 100644
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * File: drivers/video/omap/lcd-htcherald.c
- *
- * LCD panel support for the HTC Herald
- *
- * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
- * Copyright (C) 2009 Wing Linux
- *
- * Based on the lcd_htcwizard.c file from the linwizard project:
- * Copyright (C) linwizard.sourceforge.net
- * Author: Angelo Arrifano <miknix@gmail.com>
- * Based on lcd_h4 by Imre Deak <imre.deak@nokia.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include "omapfb.h"
-
-/* Found on WIZ200 (miknix) and some HERA110 models (darkstar62) */
-static struct lcd_panel htcherald_panel_1 = {
- .name = "lcd_herald",
- .config = OMAP_LCDC_PANEL_TFT |
- OMAP_LCDC_INV_HSYNC |
- OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_PIX_CLOCK,
- .bpp = 16,
- .data_lines = 16,
- .x_res = 240,
- .y_res = 320,
- .pixel_clock = 6093,
- .pcd = 0, /* 15 */
- .hsw = 10,
- .hfp = 10,
- .hbp = 20,
- .vsw = 3,
- .vfp = 2,
- .vbp = 2,
-};
-
-static int htcherald_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&htcherald_panel_1);
- return 0;
-}
-
-static struct platform_driver htcherald_panel_driver = {
- .probe = htcherald_panel_probe,
- .driver = {
- .name = "lcd_htcherald",
- },
-};
-
-module_platform_driver(htcherald_panel_driver);
-
-MODULE_AUTHOR("Cory Maccarrone");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LCD panel support for the HTC Herald");
deleted file mode 100644
@@ -1,69 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LCD panel support for the TI OMAP1510 Innovator board
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <linux/soc/ti/omap1-soc.h>
-
-#include "omapfb.h"
-
-static void __iomem *omap1510_fpga_lcd_panel_control;
-
-static int innovator1510_panel_enable(struct lcd_panel *panel)
-{
- __raw_writeb(0x7, omap1510_fpga_lcd_panel_control);
- return 0;
-}
-
-static void innovator1510_panel_disable(struct lcd_panel *panel)
-{
- __raw_writeb(0x0, omap1510_fpga_lcd_panel_control);
-}
-
-static struct lcd_panel innovator1510_panel = {
- .name = "inn1510",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .bpp = 16,
- .data_lines = 16,
- .x_res = 240,
- .y_res = 320,
- .pixel_clock = 12500,
- .hsw = 40,
- .hfp = 40,
- .hbp = 72,
- .vsw = 1,
- .vfp = 1,
- .vbp = 0,
- .pcd = 12,
-
- .enable = innovator1510_panel_enable,
- .disable = innovator1510_panel_disable,
-};
-
-static int innovator1510_panel_probe(struct platform_device *pdev)
-{
- omap1510_fpga_lcd_panel_control = (void __iomem *)pdev->dev.platform_data;
- omapfb_register_panel(&innovator1510_panel);
- return 0;
-}
-
-static struct platform_driver innovator1510_panel_driver = {
- .probe = innovator1510_panel_probe,
- .driver = {
- .name = "lcd_inn1510",
- },
-};
-
-module_platform_driver(innovator1510_panel_driver);
-
-MODULE_AUTHOR("Imre Deak");
-MODULE_DESCRIPTION("LCD panel support for the TI OMAP1510 Innovator board");
-MODULE_LICENSE("GPL");
deleted file mode 100644
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LCD panel support for the TI OMAP1610 Innovator board
- *
- * Copyright (C) 2004 Nokia Corporation
- * Author: Imre Deak <imre.deak@nokia.com>
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <linux/gpio.h>
-#include "omapfb.h"
-
-#define MODULE_NAME "omapfb-lcd_h3"
-
-static int innovator1610_panel_init(struct lcd_panel *panel,
- struct omapfb_device *fbdev)
-{
- int r = 0;
-
- /* configure GPIO(14, 15) as outputs */
- if (gpio_request_one(14, GPIOF_OUT_INIT_LOW, "lcd_en0")) {
- pr_err(MODULE_NAME ": can't request GPIO 14\n");
- r = -1;
- goto exit;
- }
- if (gpio_request_one(15, GPIOF_OUT_INIT_LOW, "lcd_en1")) {
- pr_err(MODULE_NAME ": can't request GPIO 15\n");
- gpio_free(14);
- r = -1;
- goto exit;
- }
-exit:
- return r;
-}
-
-static void innovator1610_panel_cleanup(struct lcd_panel *panel)
-{
- gpio_free(15);
- gpio_free(14);
-}
-
-static int innovator1610_panel_enable(struct lcd_panel *panel)
-{
- /* set GPIO14 and GPIO15 high */
- gpio_set_value(14, 1);
- gpio_set_value(15, 1);
- return 0;
-}
-
-static void innovator1610_panel_disable(struct lcd_panel *panel)
-{
- /* set GPIO13, GPIO14 and GPIO15 low */
- gpio_set_value(14, 0);
- gpio_set_value(15, 0);
-}
-
-static struct lcd_panel innovator1610_panel = {
- .name = "inn1610",
- .config = OMAP_LCDC_PANEL_TFT,
-
- .bpp = 16,
- .data_lines = 16,
- .x_res = 320,
- .y_res = 240,
- .pixel_clock = 12500,
- .hsw = 40,
- .hfp = 40,
- .hbp = 72,
- .vsw = 1,
- .vfp = 1,
- .vbp = 0,
- .pcd = 12,
-
- .init = innovator1610_panel_init,
- .cleanup = innovator1610_panel_cleanup,
- .enable = innovator1610_panel_enable,
- .disable = innovator1610_panel_disable,
-};
-
-static int innovator1610_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&innovator1610_panel);
- return 0;
-}
-
-static struct platform_driver innovator1610_panel_driver = {
- .probe = innovator1610_panel_probe,
- .driver = {
- .name = "lcd_inn1610",
- },
-};
-
-module_platform_driver(innovator1610_panel_driver);
-
-MODULE_AUTHOR("Imre Deak");
-MODULE_DESCRIPTION("LCD panel support for the TI OMAP1610 Innovator board");
-MODULE_LICENSE("GPL");
deleted file mode 100644
@@ -1,65 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LCD panel support for Palm Tungsten|T
- * Current version : Marek Vasut <marek.vasut@gmail.com>
- *
- * Modified from lcd_inn1510.c
- */
-
-/*
-GPIO11 - backlight
-GPIO12 - screen blanking
-GPIO13 - screen blanking
-*/
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include "omapfb.h"
-
-static unsigned long palmtt_panel_get_caps(struct lcd_panel *panel)
-{
- return OMAPFB_CAPS_SET_BACKLIGHT;
-}
-
-static struct lcd_panel palmtt_panel = {
- .name = "palmtt",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
- OMAP_LCDC_HSVS_OPPOSITE,
- .bpp = 16,
- .data_lines = 16,
- .x_res = 320,
- .y_res = 320,
- .pixel_clock = 10000,
- .hsw = 4,
- .hfp = 8,
- .hbp = 28,
- .vsw = 1,
- .vfp = 8,
- .vbp = 7,
- .pcd = 0,
-
- .get_caps = palmtt_panel_get_caps,
-};
-
-static int palmtt_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&palmtt_panel);
- return 0;
-}
-
-static struct platform_driver palmtt_panel_driver = {
- .probe = palmtt_panel_probe,
- .driver = {
- .name = "lcd_palmtt",
- },
-};
-
-module_platform_driver(palmtt_panel_driver);
-
-MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
-MODULE_DESCRIPTION("LCD panel support for Palm Tungsten|T");
-MODULE_LICENSE("GPL");
deleted file mode 100644
@@ -1,59 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * LCD panel support for the Palm Zire71
- *
- * Original version : Romain Goyet
- * Current version : Laurent Gonzalez
- * Modified for zire71 : Marek Vasut
- */
-
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include "omapfb.h"
-
-static unsigned long palmz71_panel_get_caps(struct lcd_panel *panel)
-{
- return OMAPFB_CAPS_SET_BACKLIGHT;
-}
-
-static struct lcd_panel palmz71_panel = {
- .name = "palmz71",
- .config = OMAP_LCDC_PANEL_TFT | OMAP_LCDC_INV_VSYNC |
- OMAP_LCDC_INV_HSYNC | OMAP_LCDC_HSVS_RISING_EDGE |
- OMAP_LCDC_HSVS_OPPOSITE,
- .data_lines = 16,
- .bpp = 16,
- .pixel_clock = 24000,
- .x_res = 320,
- .y_res = 320,
- .hsw = 4,
- .hfp = 8,
- .hbp = 28,
- .vsw = 1,
- .vfp = 8,
- .vbp = 7,
- .pcd = 0,
-
- .get_caps = palmz71_panel_get_caps,
-};
-
-static int palmz71_panel_probe(struct platform_device *pdev)
-{
- omapfb_register_panel(&palmz71_panel);
- return 0;
-}
-
-static struct platform_driver palmz71_panel_driver = {
- .probe = palmz71_panel_probe,
- .driver = {
- .name = "lcd_palmz71",
- },
-};
-
-module_platform_driver(palmz71_panel_driver);
-
-MODULE_AUTHOR("Romain Goyet, Laurent Gonzalez, Marek Vasut");
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("LCD panel support for the Palm Zire71");