[6.0,800/862] dmaengine: ti: k3-udma: Reset UDMA_CHAN_RT byte counters to prevent overflow
Commit Message
Greg KH
Oct. 19, 2022, 8:34 a.m. UTC
From: Vaishnav Achath <vaishnav.a@ti.com> [ Upstream commit 7c94dcfa8fcff2dba53915f1dabfee49a3df8b88 ] UDMA_CHAN_RT_*BCNT_REG stores the real-time channel bytecount statistics. These registers are 32-bit hardware counters and the driver uses these counters to monitor the operational progress status for a channel, when transferring more than 4GB of data it was observed that these counters overflow and completion calculation of a operation gets affected and the transfer hangs indefinitely. This commit adds changes to decrease the byte count for every complete transaction so that these registers never overflow and the proper byte count statistics is maintained for ongoing transaction by the RT counters. Earlier uc->bcnt used to maintain a count of the completed bytes at driver side, since the RT counters maintain the statistics of current transaction now, the maintenance of uc->bcnt is not necessary. Signed-off-by: Vaishnav Achath <vaishnav.a@ti.com> Acked-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Link: https://lore.kernel.org/r/20220802054835.19482-1-vaishnav.a@ti.com Signed-off-by: Vinod Koul <vkoul@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org> --- drivers/dma/ti/k3-udma.c | 25 +++++++++++++++++-------- 1 file changed, 17 insertions(+), 8 deletions(-)
diff --git a/drivers/dma/ti/k3-udma.c b/drivers/dma/ti/k3-udma.c index 2f0d2c68c93c..fcfcde947b30 100644 --- a/drivers/dma/ti/k3-udma.c +++ b/drivers/dma/ti/k3-udma.c @@ -300,8 +300,6 @@ struct udma_chan { struct udma_tx_drain tx_drain; - u32 bcnt; /* number of bytes completed since the start of the channel */ - /* Channel configuration parameters */ struct udma_chan_config config; @@ -757,6 +755,20 @@ static void udma_reset_rings(struct udma_chan *uc) } } +static void udma_decrement_byte_counters(struct udma_chan *uc, u32 val) +{ + if (uc->desc->dir == DMA_DEV_TO_MEM) { + udma_rchanrt_write(uc, UDMA_CHAN_RT_BCNT_REG, val); + udma_rchanrt_write(uc, UDMA_CHAN_RT_SBCNT_REG, val); + udma_rchanrt_write(uc, UDMA_CHAN_RT_PEER_BCNT_REG, val); + } else { + udma_tchanrt_write(uc, UDMA_CHAN_RT_BCNT_REG, val); + udma_tchanrt_write(uc, UDMA_CHAN_RT_SBCNT_REG, val); + if (!uc->bchan) + udma_tchanrt_write(uc, UDMA_CHAN_RT_PEER_BCNT_REG, val); + } +} + static void udma_reset_counters(struct udma_chan *uc) { u32 val; @@ -790,8 +802,6 @@ static void udma_reset_counters(struct udma_chan *uc) val = udma_rchanrt_read(uc, UDMA_CHAN_RT_PEER_BCNT_REG); udma_rchanrt_write(uc, UDMA_CHAN_RT_PEER_BCNT_REG, val); } - - uc->bcnt = 0; } static int udma_reset_chan(struct udma_chan *uc, bool hard) @@ -1115,7 +1125,7 @@ static void udma_check_tx_completion(struct work_struct *work) if (uc->desc) { struct udma_desc *d = uc->desc; - uc->bcnt += d->residue; + udma_decrement_byte_counters(uc, d->residue); udma_start(uc); vchan_cookie_complete(&d->vd); break; @@ -1168,7 +1178,7 @@ static irqreturn_t udma_ring_irq_handler(int irq, void *data) vchan_cyclic_callback(&d->vd); } else { if (udma_is_desc_really_done(uc, d)) { - uc->bcnt += d->residue; + udma_decrement_byte_counters(uc, d->residue); udma_start(uc); vchan_cookie_complete(&d->vd); } else { @@ -1204,7 +1214,7 @@ static irqreturn_t udma_udma_irq_handler(int irq, void *data) vchan_cyclic_callback(&d->vd); } else { /* TODO: figure out the real amount of data */ - uc->bcnt += d->residue; + udma_decrement_byte_counters(uc, d->residue); udma_start(uc); vchan_cookie_complete(&d->vd); } @@ -3809,7 +3819,6 @@ static enum dma_status udma_tx_status(struct dma_chan *chan, bcnt = udma_tchanrt_read(uc, UDMA_CHAN_RT_BCNT_REG); } - bcnt -= uc->bcnt; if (bcnt && !(bcnt % uc->desc->residue)) residue = 0; else