[6.0,297/862] wifi: ath11k: Include STA_KEEPALIVE_ARP_RESPONSE TLV header by default

Message ID 20221019083303.127004220@linuxfoundation.org
State New
Headers
Series None |

Commit Message

Greg KH Oct. 19, 2022, 8:26 a.m. UTC
  From: Baochen Qiang <quic_bqiang@quicinc.com>

[ Upstream commit b7b6f86149a7e06269d61a7a5206360f5b642f80 ]

In current code STA_KEEPALIVE_ARP_RESPONSE TLV header is included only
when ARP method is used, this causes firmware always to crash when wowlan
is enabled because firmware needs it to be present no matter ARP method
is used or not.

Fix this issue by including STA_KEEPALIVE_ARP_RESPONSE TLV header by
default.

Also fix below typo:
  s/WMI_TAG_STA_KEEPALVE_ARP_RESPONSE/WMI_TAG_STA_KEEPALIVE_ARP_RESPONSE/

Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3

Fixes: 0f84a156aa3b ("ath11k: Handle keepalive during WoWLAN suspend and resume")
Signed-off-by: Baochen Qiang <quic_bqiang@quicinc.com>
Signed-off-by: Kalle Valo <quic_kvalo@quicinc.com>
Link: https://lore.kernel.org/r/20220913044358.2037-1-quic_bqiang@quicinc.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
---
 drivers/net/wireless/ath/ath11k/wmi.c | 9 +++++----
 drivers/net/wireless/ath/ath11k/wmi.h | 2 +-
 2 files changed, 6 insertions(+), 5 deletions(-)
  

Patch

diff --git a/drivers/net/wireless/ath/ath11k/wmi.c b/drivers/net/wireless/ath/ath11k/wmi.c
index 88ee4f9d19da..b658ea60dcf7 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.c
+++ b/drivers/net/wireless/ath/ath11k/wmi.c
@@ -8962,12 +8962,13 @@  int ath11k_wmi_sta_keepalive(struct ath11k *ar,
 	cmd->interval = arg->interval;
 	cmd->method = arg->method;
 
+	arp = (struct wmi_sta_keepalive_arp_resp *)(cmd + 1);
+	arp->tlv_header = FIELD_PREP(WMI_TLV_TAG,
+				     WMI_TAG_STA_KEEPALIVE_ARP_RESPONSE) |
+			 FIELD_PREP(WMI_TLV_LEN, sizeof(*arp) - TLV_HDR_SIZE);
+
 	if (arg->method == WMI_STA_KEEPALIVE_METHOD_UNSOLICITED_ARP_RESPONSE ||
 	    arg->method == WMI_STA_KEEPALIVE_METHOD_GRATUITOUS_ARP_REQUEST) {
-		arp = (struct wmi_sta_keepalive_arp_resp *)(cmd + 1);
-		arp->tlv_header = FIELD_PREP(WMI_TLV_TAG,
-					     WMI_TAG_STA_KEEPALVE_ARP_RESPONSE) |
-				 FIELD_PREP(WMI_TLV_LEN, sizeof(*arp) - TLV_HDR_SIZE);
 		arp->src_ip4_addr = arg->src_ip4_addr;
 		arp->dest_ip4_addr = arg->dest_ip4_addr;
 		ether_addr_copy(arp->dest_mac_addr.addr, arg->dest_mac_addr);
diff --git a/drivers/net/wireless/ath/ath11k/wmi.h b/drivers/net/wireless/ath/ath11k/wmi.h
index 4da248ffa318..ba5343a3411f 100644
--- a/drivers/net/wireless/ath/ath11k/wmi.h
+++ b/drivers/net/wireless/ath/ath11k/wmi.h
@@ -1214,7 +1214,7 @@  enum wmi_tlv_tag {
 	WMI_TAG_NS_OFFLOAD_TUPLE,
 	WMI_TAG_FTM_INTG_CMD,
 	WMI_TAG_STA_KEEPALIVE_CMD,
-	WMI_TAG_STA_KEEPALVE_ARP_RESPONSE,
+	WMI_TAG_STA_KEEPALIVE_ARP_RESPONSE,
 	WMI_TAG_P2P_SET_VENDOR_IE_DATA_CMD,
 	WMI_TAG_AP_PS_PEER_CMD,
 	WMI_TAG_PEER_RATE_RETRY_SCHED_CMD,