[v9,4/5] thermal: mediatek: add callback for raw to mcelsius conversion

Message ID 20221018-up-i350-thermal-bringup-v9-4-55a1ae14af74@baylibre.com
State New
Headers
Series thermal: mediatek: Add support for MT8365 SoC |

Commit Message

Amjad Ouled-Ameur Jan. 27, 2023, 3:44 p.m. UTC
  Set a callback at probe time instead of checking the version at
each get_sensor_temp().

Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
---
 drivers/thermal/mtk_thermal.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)
  

Comments

Daniel Lezcano Jan. 27, 2023, 9:56 p.m. UTC | #1
On 27/01/2023 16:44, Amjad Ouled-Ameur wrote:
> Set a callback at probe time instead of checking the version at
> each get_sensor_temp().
> 
> Signed-off-by: Amjad Ouled-Ameur <aouledameur@baylibre.com>
> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
> ---

This patch has been dropped because it is duplicate of patch:

https://lore.kernel.org/r/69c17529e8418da3eec703dde31e1b01e5b0f7e8.1674055882.git.daniel@makrotopia.org



>   drivers/thermal/mtk_thermal.c | 13 ++++++-------
>   1 file changed, 6 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
> index 3a5df1440822..b8e06f6c7c42 100644
> --- a/drivers/thermal/mtk_thermal.c
> +++ b/drivers/thermal/mtk_thermal.c
> @@ -307,6 +307,8 @@ struct mtk_thermal {
>   
>   	const struct mtk_thermal_data *conf;
>   	struct mtk_thermal_bank banks[MAX_NUM_ZONES];
> +
> +	int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
>   };
>   
>   /* MT8183 thermal sensor data */
> @@ -726,13 +728,7 @@ static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
>   	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
>   		raw = readl(mt->thermal_base + conf->msr[i]);
>   
> -		if (mt->conf->version == MTK_THERMAL_V1) {
> -			temp = raw_to_mcelsius_v1(
> -				mt, conf->bank_data[bank->id].sensors[i], raw);
> -		} else {
> -			temp = raw_to_mcelsius_v2(
> -				mt, conf->bank_data[bank->id].sensors[i], raw);
> -		}
> +		temp = mt->raw_to_mcelsius(mt, i, raw);
>   
>   		/*
>   		 * The first read of a sensor often contains very high bogus
> @@ -1150,6 +1146,9 @@ static int mtk_thermal_probe(struct platform_device *pdev)
>   
>   	mtk_thermal_turn_on_buffer(mt, apmixed_base);
>   
> +	mt->raw_to_mcelsius = (mt->conf->version == MTK_THERMAL_V1) ?
> +				raw_to_mcelsius_v1 : raw_to_mcelsius_v2;
> +
>   	if (mt->conf->version == MTK_THERMAL_V2) {
>   		mtk_thermal_release_periodic_ts(mt, auxadc_base);
>   	}
>
  

Patch

diff --git a/drivers/thermal/mtk_thermal.c b/drivers/thermal/mtk_thermal.c
index 3a5df1440822..b8e06f6c7c42 100644
--- a/drivers/thermal/mtk_thermal.c
+++ b/drivers/thermal/mtk_thermal.c
@@ -307,6 +307,8 @@  struct mtk_thermal {
 
 	const struct mtk_thermal_data *conf;
 	struct mtk_thermal_bank banks[MAX_NUM_ZONES];
+
+	int (*raw_to_mcelsius)(struct mtk_thermal *mt, int sensno, s32 raw);
 };
 
 /* MT8183 thermal sensor data */
@@ -726,13 +728,7 @@  static int mtk_thermal_bank_temperature(struct mtk_thermal_bank *bank)
 	for (i = 0; i < conf->bank_data[bank->id].num_sensors; i++) {
 		raw = readl(mt->thermal_base + conf->msr[i]);
 
-		if (mt->conf->version == MTK_THERMAL_V1) {
-			temp = raw_to_mcelsius_v1(
-				mt, conf->bank_data[bank->id].sensors[i], raw);
-		} else {
-			temp = raw_to_mcelsius_v2(
-				mt, conf->bank_data[bank->id].sensors[i], raw);
-		}
+		temp = mt->raw_to_mcelsius(mt, i, raw);
 
 		/*
 		 * The first read of a sensor often contains very high bogus
@@ -1150,6 +1146,9 @@  static int mtk_thermal_probe(struct platform_device *pdev)
 
 	mtk_thermal_turn_on_buffer(mt, apmixed_base);
 
+	mt->raw_to_mcelsius = (mt->conf->version == MTK_THERMAL_V1) ?
+				raw_to_mcelsius_v1 : raw_to_mcelsius_v2;
+
 	if (mt->conf->version == MTK_THERMAL_V2) {
 		mtk_thermal_release_periodic_ts(mt, auxadc_base);
 	}