[v4,3/4] arm64: dts: qcom: msm8998: align TLMM pin configuration with DT schema

Message ID 20221017234653.55506-3-krzysztof.kozlowski@linaro.org
State New
Headers
Series [v4,1/4] arm64: dts: qcom: msm8998: add gpio-ranges to TLMM |

Commit Message

Krzysztof Kozlowski Oct. 17, 2022, 11:46 p.m. UTC
  DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>

---

Changes since v3:
1. Add Rb tag.

Changes since v2:
1. None
---
 .../boot/dts/qcom/msm8998-clamshell.dtsi      |  7 +-
 .../boot/dts/qcom/msm8998-fxtec-pro1.dts      | 16 ++--
 arch/arm64/boot/dts/qcom/msm8998-mtp.dts      |  4 +-
 .../dts/qcom/msm8998-oneplus-cheeseburger.dts | 10 +--
 .../boot/dts/qcom/msm8998-oneplus-common.dtsi | 14 ++--
 .../dts/qcom/msm8998-sony-xperia-yoshino.dtsi | 30 ++++----
 arch/arm64/boot/dts/qcom/msm8998.dtsi         | 76 +++++++++----------
 7 files changed, 78 insertions(+), 79 deletions(-)
  

Patch

diff --git a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
index 7928b8197474..16685fadd3e1 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-clamshell.dtsi
@@ -35,7 +35,7 @@  bluetooth {
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -46,7 +46,7 @@  rx {
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -357,8 +357,9 @@  &sdhc2 {
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	touchpad: touchpad-pin {
+	touchpad: touchpad-pin-state {
 		pins = "gpio123";
+		function = "gpio";
 		bias-pull-up;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index 429ba57e20f7..5fc0564664cf 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -216,7 +216,7 @@  bluetooth {
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -227,7 +227,7 @@  rx {
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -615,14 +615,14 @@  &remoteproc_slpi {
 &tlmm {
 	gpio-reserved-ranges = <0 4>;
 
-	mdp_vsync_n: mdp-vsync-n {
+	mdp_vsync_n: mdp-vsync-n-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		bias-pull-down;
 		drive-strength = <2>;
 	};
 
-	gpio_kb_pins_extra: gpio-kb-pins-extra {
+	gpio_kb_pins_extra: gpio-kb-pins-extra-state {
 		pins = "gpio21", "gpio32", "gpio33", "gpio114",
 		       "gpio128", "gpio129";
 		function = "gpio";
@@ -630,21 +630,21 @@  gpio_kb_pins_extra: gpio-kb-pins-extra {
 		bias-pull-up;
 	};
 
-	ts_vio_default: ts-vio-def {
+	ts_vio_default: ts-vio-def-state {
 		pins = "gpio81";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	ts_rst_n: ts-rst-n {
+	ts_rst_n: ts-rst-n-state {
 		pins = "gpio89";
 		function = "gpio";
 		bias-pull-up;
 		drive-strength = <8>;
 	};
 
-	hall_sensor1_default: hall-sensor1-def {
+	hall_sensor1_default: hall-sensor1-def-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
@@ -652,7 +652,7 @@  hall_sensor1_default: hall-sensor1-def {
 		input-enable;
 	};
 
-	ts_int_n: ts-int-n {
+	ts_int_n: ts-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
index a3ca58100aee..61f5a827a8d7 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-mtp.dts
@@ -46,7 +46,7 @@  bluetooth {
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 45 (RX). This is needed to
@@ -57,7 +57,7 @@  rx {
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
index 122f6c25220e..b951f98d1b7b 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-cheeseburger.dts
@@ -33,11 +33,9 @@  button-backlight {
 
 &pmi8998_gpio {
 	button_backlight_default: button-backlight-state {
-		pinconf {
-			pins = "gpio5";
-			function = "gpio";
-			bias-pull-down;
-			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
-		};
+		pins = "gpio5";
+		function = "gpio";
+		bias-pull-down;
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
index 62bda23791bb..748de88d5d57 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-oneplus-common.dtsi
@@ -233,7 +233,7 @@  bluetooth {
 };
 
 &blsp1_uart3_on {
-	rx {
+	rx-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-up on 46 (RX). This is needed to
@@ -244,7 +244,7 @@  rx {
 		bias-pull-up;
 	};
 
-	cts {
+	cts-pins {
 		/delete-property/ bias-disable;
 		/*
 		 * Configure a pull-down on 47 (CTS) to match the pull
@@ -492,7 +492,7 @@  vreg_bob: bob {
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	hall_sensor_default: hall-sensor-default {
+	hall_sensor_default: hall-sensor-default-state {
 		pins = "gpio124";
 		function = "gpio";
 		drive-strength = <2>;
@@ -500,28 +500,28 @@  hall_sensor_default: hall-sensor-default {
 		input-enable;
 	};
 
-	ts_int_active: ts-int-active {
+	ts_int_active: ts-int-active-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	ts_reset_active: ts-reset-active {
+	ts_reset_active: ts-reset-active-state {
 		pins = "gpio89";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	nfc_int_active: nfc-int-active {
+	nfc_int_active: nfc-int-active-state {
 		pins = "gpio92";
 		function = "gpio";
 		drive-strength = <6>;
 		bias-pull-up;
 	};
 
-	nfc_enable_active: nfc-enable-active {
+	nfc_enable_active: nfc-enable-active-state {
 		pins = "gpio12", "gpio116";
 		function = "gpio";
 		drive-strength = <6>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
index d08639082247..440f2b2d2b2e 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998-sony-xperia-yoshino.dtsi
@@ -565,14 +565,14 @@  &sdhc2 {
 &tlmm {
 	gpio-reserved-ranges = <0 4>, <81 4>;
 
-	mdp_vsync_n: mdp-vsync-n {
+	mdp_vsync_n: mdp-vsync-n-state {
 		pins = "gpio10";
 		function = "mdp_vsync_a";
 		drive-strength = <2>;
 		bias-pull-down;
 	};
 
-	nfc_ven: nfc-ven {
+	nfc_ven: nfc-ven-state {
 		pins = "gpio12";
 		function = "gpio";
 		bias-disable;
@@ -580,42 +580,42 @@  nfc_ven: nfc-ven {
 		output-low;
 	};
 
-	msm_mclk0_default: msm-mclk0-active {
+	msm_mclk0_default: msm-mclk0-active-state {
 		pins = "gpio13";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	msm_mclk1_default: msm-mclk1-active {
+	msm_mclk1_default: msm-mclk1-active-state {
 		pins = "gpio14";
 		function = "cam_mclk";
 		drive-strength = <2>;
 		bias-disable;
 	};
 
-	cci0_default: cci0-default {
+	cci0_default: cci0-default-state {
 		pins = "gpio18", "gpio19";
 		function = "cci_i2c";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cci1_default: cci1-default {
+	cci1_default: cci1-default-state {
 		pins = "gpio19", "gpio20";
 		function = "cci_i2c";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	cam0_vdig_default: cam0-vdig-default {
+	cam0_vdig_default: cam0-vdig-default-state {
 		pins = "gpio21";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	tof_int: tof-int {
+	tof_int: tof-int-state {
 		pins = "gpio22";
 		function = "gpio";
 		bias-pull-up;
@@ -623,28 +623,28 @@  tof_int: tof-int {
 		input-enable;
 	};
 
-	cam1_vdig_default: cam1-vdig-default {
+	cam1_vdig_default: cam1-vdig-default-state {
 		pins = "gpio25";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	usb_extcon_active: usb-extcon-active {
+	usb_extcon_active: usb-extcon-active-state {
 		pins = "gpio38";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <16>;
 	};
 
-	tof_reset: tof-reset {
+	tof_reset: tof-reset-state {
 		pins = "gpio27";
 		function = "gpio";
 		bias-disable;
 		drive-strength = <2>;
 	};
 
-	hall_sensor0_default: acc-cover-open {
+	hall_sensor0_default: acc-cover-open-state {
 		pins = "gpio124";
 		function = "gpio";
 		bias-disable;
@@ -652,14 +652,14 @@  hall_sensor0_default: acc-cover-open {
 		input-enable;
 	};
 
-	ts_int_n: ts-int-n {
+	ts_int_n: ts-int-n-state {
 		pins = "gpio125";
 		function = "gpio";
 		drive-strength = <8>;
 		bias-pull-up;
 	};
 
-	usb_vbus_active: usb-vbus-active {
+	usb_vbus_active: usb-vbus-active-state {
 		pins = "gpio128";
 		function = "gpio";
 		bias-disable;
@@ -667,7 +667,7 @@  usb_vbus_active: usb-vbus-active {
 		output-low;
 	};
 
-	ts_vddio_en: ts-vddio-en-default {
+	ts_vddio_en: ts-vddio-en-default-state {
 		pins = "gpio133";
 		function = "gpio";
 		bias-disable;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 2c4acf227253..9650670eae05 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -1062,76 +1062,76 @@  tlmm: pinctrl@3400000 {
 			interrupt-controller;
 			#interrupt-cells = <2>;
 
-			sdc2_on: sdc2-on {
-				clk {
+			sdc2_on: sdc2-on-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <16>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <10>;
 					bias-pull-up;
 				};
 			};
 
-			sdc2_off: sdc2-off {
-				clk {
+			sdc2_off: sdc2-off-state {
+				clk-pins {
 					pins = "sdc2_clk";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cmd {
+				cmd-pins {
 					pins = "sdc2_cmd";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 
-				data {
+				data-pins {
 					pins = "sdc2_data";
 					drive-strength = <2>;
 					bias-pull-up;
 				};
 			};
 
-			sdc2_cd: sdc2-cd {
+			sdc2_cd: sdc2-cd-state {
 				pins = "gpio95";
 				function = "gpio";
 				bias-pull-up;
 				drive-strength = <2>;
 			};
 
-			blsp1_uart3_on: blsp1-uart3-on {
-				tx {
+			blsp1_uart3_on: blsp1-uart3-on-state {
+				tx-pins {
 					pins = "gpio45";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rx {
+				rx-pins {
 					pins = "gpio46";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				cts {
+				cts-pins {
 					pins = "gpio47";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
 					bias-disable;
 				};
 
-				rfr {
+				rfr-pins {
 					pins = "gpio48";
 					function = "blsp_uart3_a";
 					drive-strength = <2>;
@@ -1139,168 +1139,168 @@  rfr {
 				};
 			};
 
-			blsp1_i2c1_default: blsp1-i2c1-default {
+			blsp1_i2c1_default: blsp1-i2c1-default-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c1_sleep: blsp1-i2c1-sleep {
+			blsp1_i2c1_sleep: blsp1-i2c1-sleep-state-state {
 				pins = "gpio2", "gpio3";
 				function = "blsp_i2c1";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c2_default: blsp1-i2c2-default {
+			blsp1_i2c2_default: blsp1-i2c2-default-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c2_sleep: blsp1-i2c2-sleep {
+			blsp1_i2c2_sleep: blsp1-i2c2-sleep-state-state {
 				pins = "gpio32", "gpio33";
 				function = "blsp_i2c2";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c3_default: blsp1-i2c3-default {
+			blsp1_i2c3_default: blsp1-i2c3-default-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c3_sleep: blsp1-i2c3-sleep {
+			blsp1_i2c3_sleep: blsp1-i2c3-sleep-state {
 				pins = "gpio47", "gpio48";
 				function = "blsp_i2c3";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c4_default: blsp1-i2c4-default {
+			blsp1_i2c4_default: blsp1-i2c4-default-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c4_sleep: blsp1-i2c4-sleep {
+			blsp1_i2c4_sleep: blsp1-i2c4-sleep-state {
 				pins = "gpio10", "gpio11";
 				function = "blsp_i2c4";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c5_default: blsp1-i2c5-default {
+			blsp1_i2c5_default: blsp1-i2c5-default-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c5_sleep: blsp1-i2c5-sleep {
+			blsp1_i2c5_sleep: blsp1-i2c5-sleep-state {
 				pins = "gpio87", "gpio88";
 				function = "blsp_i2c5";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp1_i2c6_default: blsp1-i2c6-default {
+			blsp1_i2c6_default: blsp1-i2c6-default-state {
 				pins = "gpio43", "gpio44";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp1_i2c6_sleep: blsp1-i2c6-sleep {
+			blsp1_i2c6_sleep: blsp1-i2c6-sleep-state {
 				pins = "gpio43", "gpio44";
 				function = "blsp_i2c6";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 			/* 6 interfaces per QUP, BLSP2 indexes are numbered (n)+6 */
-			blsp2_i2c1_default: blsp2-i2c1-default {
+			blsp2_i2c1_default: blsp2-i2c1-default-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c1_sleep: blsp2-i2c1-sleep {
+			blsp2_i2c1_sleep: blsp2-i2c1-sleep-state {
 				pins = "gpio55", "gpio56";
 				function = "blsp_i2c7";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c2_default: blsp2-i2c2-default {
+			blsp2_i2c2_default: blsp2-i2c2-default-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c2_sleep: blsp2-i2c2-sleep {
+			blsp2_i2c2_sleep: blsp2-i2c2-sleep-state {
 				pins = "gpio6", "gpio7";
 				function = "blsp_i2c8";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c3_default: blsp2-i2c3-default {
+			blsp2_i2c3_default: blsp2-i2c3-default-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c3_sleep: blsp2-i2c3-sleep {
+			blsp2_i2c3_sleep: blsp2-i2c3-sleep-state {
 				pins = "gpio51", "gpio52";
 				function = "blsp_i2c9";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c4_default: blsp2-i2c4-default {
+			blsp2_i2c4_default: blsp2-i2c4-default-state {
 				pins = "gpio67", "gpio68";
 				function = "blsp_i2c10";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c4_sleep: blsp2-i2c4-sleep {
+			blsp2_i2c4_sleep: blsp2-i2c4-sleep-state {
 				pins = "gpio67", "gpio68";
 				function = "blsp_i2c10";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c5_default: blsp2-i2c5-default {
+			blsp2_i2c5_default: blsp2-i2c5-default-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c5_sleep: blsp2-i2c5-sleep {
+			blsp2_i2c5_sleep: blsp2-i2c5-sleep-state {
 				pins = "gpio60", "gpio61";
 				function = "blsp_i2c11";
 				drive-strength = <2>;
 				bias-pull-up;
 			};
 
-			blsp2_i2c6_default: blsp2-i2c6-default {
+			blsp2_i2c6_default: blsp2-i2c6-default-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c12";
 				drive-strength = <2>;
 				bias-disable;
 			};
 
-			blsp2_i2c6_sleep: blsp2-i2c6-sleep {
+			blsp2_i2c6_sleep: blsp2-i2c6-sleep-state {
 				pins = "gpio83", "gpio84";
 				function = "blsp_i2c12";
 				drive-strength = <2>;