diff mbox series

[v4,3/3] riscv: dts: starfive: Add StarFive VisionFive V1 device tree

Message ID 20221017210542.979051-4-cristian.ciocaltea@collabora.com
State New
Headers
Series Enable initial support for StarFive VisionFive V1 SBC |

Commit Message

Cristian Ciocaltea Oct. 17, 2022, 9:05 p.m. UTC 
  Add initial device tree for the StarFive VisionFive V1 SBC [1], which
is similar with the already supported BeagleV Starlight Beta board,
both being based on the StarFive JH7100 SoC.

[1] https://github.com/starfive-tech/VisionFive

Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
---
 arch/riscv/boot/dts/starfive/Makefile         |  2 +-
 .../jh7100-starfive-visionfive-v1.dts         | 20 +++++++++++++++++++
 2 files changed, 21 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts

Comments

Matthias Brugger Oct. 18, 2022, 8:26 a.m. UTC | #1 
On Tue, Oct 18, 2022 at 12:05:42AM +0300, Cristian Ciocaltea wrote:
> Add initial device tree for the StarFive VisionFive V1 SBC [1], which
> is similar with the already supported BeagleV Starlight Beta board,
> both being based on the StarFive JH7100 SoC.
> 
> [1] https://github.com/starfive-tech/VisionFive
> 
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
> Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Reviewed-by: Matthias Brugger <mbrugger@suse.com>

> ---
>  arch/riscv/boot/dts/starfive/Makefile         |  2 +-
>  .../jh7100-starfive-visionfive-v1.dts         | 20 +++++++++++++++++++
>  2 files changed, 21 insertions(+), 1 deletion(-)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
> 
> diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
> index 0ea1bc15ab30..039c143cba33 100644
> --- a/arch/riscv/boot/dts/starfive/Makefile
> +++ b/arch/riscv/boot/dts/starfive/Makefile
> @@ -1,2 +1,2 @@
>  # SPDX-License-Identifier: GPL-2.0
> -dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
> +dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
> diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
> new file mode 100644
> index 000000000000..e82af72f1aaf
> --- /dev/null
> +++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: GPL-2.0 OR MIT
> +/*
> + * Copyright (C) 2021 StarFive Technology Co., Ltd.
> + * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
> + */
> +
> +/dts-v1/;
> +#include "jh7100-common.dtsi"
> +#include <dt-bindings/gpio/gpio.h>
> +
> +/ {
> +	model = "StarFive VisionFive V1";
> +	compatible = "starfive,visionfive-v1", "starfive,jh7100";
> +
> +	gpio-restart {
> +		compatible = "gpio-restart";
> +		gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
> +		priority = <224>;
> +	};
> +};
> -- 
> 2.38.0
> 
> 
> _______________________________________________
> linux-riscv mailing list
> linux-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-riscv
diff mbox series

Patch

diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index 0ea1bc15ab30..039c143cba33 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -1,2 +1,2 @@ 
 # SPDX-License-Identifier: GPL-2.0
-dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb
+dtb-$(CONFIG_SOC_STARFIVE) += jh7100-beaglev-starlight.dtb jh7100-starfive-visionfive-v1.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
new file mode 100644
index 000000000000..e82af72f1aaf
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7100-starfive-visionfive-v1.dts
@@ -0,0 +1,20 @@ 
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2021 StarFive Technology Co., Ltd.
+ * Copyright (C) 2021 Emil Renner Berthing <kernel@esmil.dk>
+ */
+
+/dts-v1/;
+#include "jh7100-common.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "StarFive VisionFive V1";
+	compatible = "starfive,visionfive-v1", "starfive,jh7100";
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+};