diff mbox series

[linux,v2,2/3] spi: aspeed: Handle custom decoding ranges

Message ID 20221017091624.130227-3-clg@kaod.org
State New
Headers
Series spi: aspeed: Add a "ranges" property |

Commit Message

Cédric Le Goater Oct. 17, 2022, 9:16 a.m. UTC 
  The "ranges" property predefines settings for the decoding ranges of
each CS. If found in the DT, the driver applies the settings at probe
time. The default behavior is to set the decoding range of each CS
using the flash device size when the spi slave is setup.

Cc: Naresh Solanki <naresh.solanki@9elements.com>
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 drivers/spi/spi-aspeed-smc.c | 65 +++++++++++++++++++++++++++++++++++-
 1 file changed, 64 insertions(+), 1 deletion(-)

Comments

Rob Herring Oct. 17, 2022, 6:57 p.m. UTC | #1 
On Mon, Oct 17, 2022 at 11:16:23AM +0200, Cédric Le Goater wrote:
> The "ranges" property predefines settings for the decoding ranges of
> each CS. If found in the DT, the driver applies the settings at probe
> time. The default behavior is to set the decoding range of each CS
> using the flash device size when the spi slave is setup.
> 
> Cc: Naresh Solanki <naresh.solanki@9elements.com>
> Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
> Signed-off-by: Cédric Le Goater <clg@kaod.org>
> ---
>  drivers/spi/spi-aspeed-smc.c | 65 +++++++++++++++++++++++++++++++++++-
>  1 file changed, 64 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
> index b90571396a60..75e1d08bbd00 100644
> --- a/drivers/spi/spi-aspeed-smc.c
> +++ b/drivers/spi/spi-aspeed-smc.c
> @@ -96,6 +96,7 @@ struct aspeed_spi {
>  	u32			 ahb_base_phy;
>  	u32			 ahb_window_size;
>  	struct device		*dev;
> +	bool                     fixed_windows;
>  
>  	struct clk		*clk;
>  	u32			 clk_freq;
> @@ -382,6 +383,7 @@ static const char *aspeed_spi_get_name(struct spi_mem *mem)
>  
>  struct aspeed_spi_window {
>  	u32 cs;
> +	u32 reg;
>  	u32 offset;
>  	u32 size;
>  };
> @@ -396,6 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi,
>  	for (cs = 0; cs < aspi->data->max_cs; cs++) {
>  		reg_val = readl(aspi->regs + CE0_SEGMENT_ADDR_REG + cs * 4);
>  		windows[cs].cs = cs;
> +		windows[cs].reg = reg_val;
>  		windows[cs].size = data->segment_end(aspi, reg_val) -
>  			data->segment_start(aspi, reg_val);
>  		windows[cs].offset = data->segment_start(aspi, reg_val) - aspi->ahb_base_phy;
> @@ -572,7 +575,8 @@ static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
>  	if (op->data.dir != SPI_MEM_DATA_IN)
>  		return -EOPNOTSUPP;
>  
> -	aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length);
> +	if (!aspi->fixed_windows)
> +		aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length);
>  
>  	if (desc->info.length > chip->ahb_window_size)
>  		dev_warn(aspi->dev, "CE%d window (%dMB) too small for mapping",
> @@ -712,6 +716,61 @@ static void aspeed_spi_enable(struct aspeed_spi *aspi, bool enable)
>  		aspeed_spi_chip_enable(aspi, cs, enable);
>  }
>  
> +static int aspeed_spi_chip_read_ranges(struct device_node *node, struct aspeed_spi *aspi)
> +{
> +	const char *range_prop = "ranges";
> +	struct property *prop;
> +	struct aspeed_spi_window ranges[ASPEED_SPI_MAX_NUM_CS];
> +	int prop_size;
> +	int count;
> +	int ret;
> +	int i;
> +
> +	prop = of_find_property(node, range_prop, &prop_size);
> +	if (!prop)
> +		return 0;

Parsing common properties yourself is generally a bad sign.

> +
> +	count = prop_size / sizeof(*ranges);
> +	if (count > aspi->data->max_cs) {
> +		dev_err(aspi->dev, "invalid '%s' property %d\n", range_prop, count);
> +		return -EINVAL;
> +	}
> +
> +	if (count < aspi->data->max_cs)
> +		dev_dbg(aspi->dev, "'%s' property does not cover all CE\n",
> +			range_prop);
> +
> +	ret = of_property_read_u32_array(node, range_prop, (u32 *)ranges, count * 4);

You've just gotten it horribly wrong because you ignored #size-cells and 
#address-cells.

Rob
diff mbox series

Patch

diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
index b90571396a60..75e1d08bbd00 100644
--- a/drivers/spi/spi-aspeed-smc.c
+++ b/drivers/spi/spi-aspeed-smc.c
@@ -96,6 +96,7 @@  struct aspeed_spi {
 	u32			 ahb_base_phy;
 	u32			 ahb_window_size;
 	struct device		*dev;
+	bool                     fixed_windows;
 
 	struct clk		*clk;
 	u32			 clk_freq;
@@ -382,6 +383,7 @@  static const char *aspeed_spi_get_name(struct spi_mem *mem)
 
 struct aspeed_spi_window {
 	u32 cs;
+	u32 reg;
 	u32 offset;
 	u32 size;
 };
@@ -396,6 +398,7 @@  static void aspeed_spi_get_windows(struct aspeed_spi *aspi,
 	for (cs = 0; cs < aspi->data->max_cs; cs++) {
 		reg_val = readl(aspi->regs + CE0_SEGMENT_ADDR_REG + cs * 4);
 		windows[cs].cs = cs;
+		windows[cs].reg = reg_val;
 		windows[cs].size = data->segment_end(aspi, reg_val) -
 			data->segment_start(aspi, reg_val);
 		windows[cs].offset = data->segment_start(aspi, reg_val) - aspi->ahb_base_phy;
@@ -572,7 +575,8 @@  static int aspeed_spi_dirmap_create(struct spi_mem_dirmap_desc *desc)
 	if (op->data.dir != SPI_MEM_DATA_IN)
 		return -EOPNOTSUPP;
 
-	aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length);
+	if (!aspi->fixed_windows)
+		aspeed_spi_chip_adjust_window(chip, desc->info.offset, desc->info.length);
 
 	if (desc->info.length > chip->ahb_window_size)
 		dev_warn(aspi->dev, "CE%d window (%dMB) too small for mapping",
@@ -712,6 +716,61 @@  static void aspeed_spi_enable(struct aspeed_spi *aspi, bool enable)
 		aspeed_spi_chip_enable(aspi, cs, enable);
 }
 
+static int aspeed_spi_chip_read_ranges(struct device_node *node, struct aspeed_spi *aspi)
+{
+	const char *range_prop = "ranges";
+	struct property *prop;
+	struct aspeed_spi_window ranges[ASPEED_SPI_MAX_NUM_CS];
+	int prop_size;
+	int count;
+	int ret;
+	int i;
+
+	prop = of_find_property(node, range_prop, &prop_size);
+	if (!prop)
+		return 0;
+
+	count = prop_size / sizeof(*ranges);
+	if (count > aspi->data->max_cs) {
+		dev_err(aspi->dev, "invalid '%s' property %d\n", range_prop, count);
+		return -EINVAL;
+	}
+
+	if (count < aspi->data->max_cs)
+		dev_dbg(aspi->dev, "'%s' property does not cover all CE\n",
+			range_prop);
+
+	ret = of_property_read_u32_array(node, range_prop, (u32 *)ranges, count * 4);
+	if (ret)
+		return ret;
+
+	dev_info(aspi->dev, "Using preset decoding ranges\n");
+	for (i = 0; i < count; i++) {
+		struct aspeed_spi_window *win = &ranges[i];
+
+		if (win->cs > aspi->data->max_cs) {
+			dev_err(aspi->dev, "CE%d range is invalid", win->cs);
+			return -EINVAL;
+		}
+
+		/* Trim top bit of the address to keep offset */
+		win->offset &= aspi->ahb_window_size - 1;
+
+		/* Minimal check */
+		if (win->offset + win->size > aspi->ahb_window_size) {
+			dev_warn(aspi->dev, "CE%d range is too large", win->cs);
+				return -EINVAL;
+		}
+
+		ret = aspeed_spi_set_window(aspi, win);
+		if (ret)
+			return ret;
+	}
+
+	aspi->fixed_windows = true;
+	return 0;
+}
+
 static int aspeed_spi_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -767,6 +826,10 @@  static int aspeed_spi_probe(struct platform_device *pdev)
 		return ret;
 	}
 
+	ret = aspeed_spi_chip_read_ranges(dev->of_node, aspi);
+	if (ret)
+		return ret;
+
 	/* IRQ is for DMA, which the driver doesn't support yet */
 
 	ctlr->mode_bits = SPI_RX_DUAL | SPI_TX_DUAL | data->mode_bits;