[V5,18/26] mmc: sdhci-uhs2: add uhs2_control() to initialise the interface

Message ID 20221017091153.454873-19-victor.shih@genesyslogic.com.tw
State New
Headers
Series Add support UHS-II for GL9755 |

Commit Message

Victor Shih Oct. 17, 2022, 9:11 a.m. UTC
  This is a sdhci version of mmc's uhs2_set_reg operation.
UHS-II interface (related registers) will be initialised here.

Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
---
 drivers/mmc/host/sdhci-uhs2.c | 115 ++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)
  

Patch

diff --git a/drivers/mmc/host/sdhci-uhs2.c b/drivers/mmc/host/sdhci-uhs2.c
index 3f3665d7990c..b0e6403ed31f 100644
--- a/drivers/mmc/host/sdhci-uhs2.c
+++ b/drivers/mmc/host/sdhci-uhs2.c
@@ -350,6 +350,65 @@  static void __sdhci_uhs2_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
 	spin_unlock_irqrestore(&host->lock, flags);
 }
 
+/* TODO: move this function to sdhci.c */
+static void sdhci_clear_set_irqs(struct sdhci_host *host, u32 clear, u32 set)
+{
+	u32 ier;
+
+	ier = sdhci_readl(host, SDHCI_INT_ENABLE);
+	ier &= ~clear;
+	ier |= set;
+	sdhci_writel(host, ier, SDHCI_INT_ENABLE);
+	sdhci_writel(host, ier, SDHCI_SIGNAL_ENABLE);
+}
+
+static void sdhci_uhs2_set_config(struct sdhci_host *host)
+{
+	u32 value;
+	u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
+	u16 sdhci_uhs2_gen_set_reg = (sdhci_uhs2_set_ptr + 0);
+	u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+	u16 sdhci_uhs2_tran_set_reg = (sdhci_uhs2_set_ptr + 8);
+	u16 sdhci_uhs2_tran_set_1_reg = (sdhci_uhs2_set_ptr + 12);
+
+	/* Set Gen Settings */
+	sdhci_writel(host, host->mmc->uhs2_caps.n_lanes_set <<
+		SDHCI_UHS2_GEN_SET_N_LANES_POS, sdhci_uhs2_gen_set_reg);
+
+	/* Set PHY Settings */
+	value = (host->mmc->uhs2_caps.n_lss_dir_set <<
+			SDHCI_UHS2_PHY_SET_N_LSS_DIR_POS) |
+		(host->mmc->uhs2_caps.n_lss_sync_set <<
+			SDHCI_UHS2_PHY_SET_N_LSS_SYN_POS);
+	if (host->mmc->flags & MMC_UHS2_SPEED_B)
+		value |= 1 << SDHCI_UHS2_PHY_SET_SPEED_POS;
+	sdhci_writel(host, value, sdhci_uhs2_phy_set_reg);
+
+	/* Set LINK-TRAN Settings */
+	value = (host->mmc->uhs2_caps.max_retry_set <<
+			SDHCI_UHS2_TRAN_SET_RETRY_CNT_POS) |
+		(host->mmc->uhs2_caps.n_fcu_set <<
+			SDHCI_UHS2_TRAN_SET_N_FCU_POS);
+	sdhci_writel(host, value, sdhci_uhs2_tran_set_reg);
+	sdhci_writel(host, host->mmc->uhs2_caps.n_data_gap_set,
+		     sdhci_uhs2_tran_set_1_reg);
+}
+
+static int sdhci_uhs2_check_dormant(struct sdhci_host *host)
+{
+	u32 val;
+	/* 100ms */
+	int timeout = 100000;
+
+	if (read_poll_timeout_atomic(sdhci_readl, val, (val & SDHCI_UHS2_IN_DORMANT_STATE),
+				     100, timeout, true, host, SDHCI_PRESENT_STATE)) {
+		pr_warn("%s: UHS2 IN_DORMANT fail in 100ms.\n", mmc_hostname(host->mmc));
+		sdhci_dumpregs(host);
+		return -EIO;
+	}
+	return 0;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * MMC callbacks                                                             *
@@ -435,6 +494,61 @@  static int sdhci_uhs2_enable_clk(struct mmc_host *mmc)
 	return 0;
 }
 
+static int sdhci_uhs2_do_detect_init(struct mmc_host *mmc);
+
+static int sdhci_uhs2_control(struct mmc_host *mmc, enum sd_uhs2_operation op)
+{
+	struct sdhci_host *host = mmc_priv(mmc);
+	unsigned long flags;
+	int err = 0;
+	u16 sdhci_uhs2_set_ptr = sdhci_readw(host, SDHCI_UHS2_SET_PTR);
+	u16 sdhci_uhs2_phy_set_reg = (sdhci_uhs2_set_ptr + 4);
+
+	DBG("Begin %s, act %d.\n", __func__, op);
+
+	spin_lock_irqsave(&host->lock, flags);
+
+	switch (op) {
+	case UHS2_PHY_INIT:
+		err = sdhci_uhs2_do_detect_init(mmc);
+		break;
+	case UHS2_SET_CONFIG:
+		sdhci_uhs2_set_config(host);
+		break;
+	case UHS2_ENABLE_INT:
+		sdhci_clear_set_irqs(host, 0, SDHCI_INT_CARD_INT);
+		break;
+	case UHS2_DISABLE_INT:
+		sdhci_clear_set_irqs(host, SDHCI_INT_CARD_INT, 0);
+		break;
+	case UHS2_SET_SPEED_B:
+		sdhci_writeb(host, 1 << SDHCI_UHS2_PHY_SET_SPEED_POS,
+			     sdhci_uhs2_phy_set_reg);
+		break;
+	case UHS2_CHECK_DORMANT:
+		err = sdhci_uhs2_check_dormant(host);
+		break;
+	case UHS2_DISABLE_CLK:
+		err = sdhci_uhs2_disable_clk(mmc);
+		break;
+	case UHS2_ENABLE_CLK:
+		err = sdhci_uhs2_enable_clk(mmc);
+		break;
+	case UHS2_POST_ATTACH_SD:
+		host->ops->uhs2_post_attach_sd(host);
+		break;
+	default:
+		pr_err("%s: input sd uhs2 operation %d is wrong!\n",
+		       mmc_hostname(host->mmc), op);
+		err = -EIO;
+		break;
+	}
+
+	spin_unlock_irqrestore(&host->lock, flags);
+
+	return err;
+}
+
 /*****************************************************************************\
  *                                                                           *
  * Driver init/exit                                                          *
@@ -593,6 +707,7 @@  static int sdhci_uhs2_host_ops_init(struct sdhci_host *host)
 	host->mmc_host_ops.start_signal_voltage_switch =
 		sdhci_uhs2_start_signal_voltage_switch;
 	host->mmc_host_ops.uhs2_set_ios = sdhci_uhs2_set_ios;
+	host->mmc_host_ops.uhs2_control = sdhci_uhs2_control;
 
 	if (!host->mmc_host_ops.uhs2_detect_init)
 		host->mmc_host_ops.uhs2_detect_init = sdhci_uhs2_do_detect_init;