DT schema expects TLMM pin configuration nodes to be named with
'-state' suffix and their optional children with '-pins' suffix.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Konrad Dybcio <konrad.dybcio@somainline.org>
---
arch/arm/boot/dts/qcom-apq8026-lg-lenok.dts | 6 +++---
arch/arm/boot/dts/qcom-msm8226.dtsi | 24 ++++++++++-----------
2 files changed, 15 insertions(+), 15 deletions(-)
@@ -299,8 +299,8 @@ bluetooth_default_state: bluetooth-default-state {
input-enable;
};
- touch_pins: touch {
- irq {
+ touch_pins: touch-state {
+ irq-pins {
pins = "gpio17";
function = "gpio";
@@ -309,7 +309,7 @@ irq {
input-enable;
};
- reset {
+ reset-pins {
pins = "gpio16";
function = "gpio";
@@ -354,35 +354,35 @@ tlmm: pinctrl@fd510000 {
#interrupt-cells = <2>;
interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
- blsp1_i2c1_pins: blsp1-i2c1 {
+ blsp1_i2c1_pins: blsp1-i2c1-state {
pins = "gpio2", "gpio3";
function = "blsp_i2c1";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c2_pins: blsp1-i2c2 {
+ blsp1_i2c2_pins: blsp1-i2c2-state {
pins = "gpio6", "gpio7";
function = "blsp_i2c2";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c3_pins: blsp1-i2c3 {
+ blsp1_i2c3_pins: blsp1-i2c3-state {
pins = "gpio10", "gpio11";
function = "blsp_i2c3";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c4_pins: blsp1-i2c4 {
+ blsp1_i2c4_pins: blsp1-i2c4-state {
pins = "gpio14", "gpio15";
function = "blsp_i2c4";
drive-strength = <2>;
bias-disable;
};
- blsp1_i2c5_pins: blsp1-i2c5 {
+ blsp1_i2c5_pins: blsp1-i2c5-state {
pins = "gpio18", "gpio19";
function = "blsp_i2c5";
drive-strength = <2>;
@@ -390,13 +390,13 @@ blsp1_i2c5_pins: blsp1-i2c5 {
};
sdhc1_default_state: sdhc1-default-state {
- clk {
+ clk-pins {
pins = "sdc1_clk";
drive-strength = <10>;
bias-disable;
};
- cmd-data {
+ cmd-data-pins {
pins = "sdc1_cmd", "sdc1_data";
drive-strength = <10>;
bias-pull-up;
@@ -404,13 +404,13 @@ cmd-data {
};
sdhc2_default_state: sdhc2-default-state {
- clk {
+ clk-pins {
pins = "sdc2_clk";
drive-strength = <10>;
bias-disable;
};
- cmd-data {
+ cmd-data-pins {
pins = "sdc2_cmd", "sdc2_data";
drive-strength = <10>;
bias-pull-up;
@@ -418,21 +418,21 @@ cmd-data {
};
sdhc3_default_state: sdhc3-default-state {
- clk {
+ clk-pins {
pins = "gpio44";
function = "sdc3";
drive-strength = <8>;
bias-disable;
};
- cmd {
+ cmd-pins {
pins = "gpio43";
function = "sdc3";
drive-strength = <8>;
bias-pull-up;
};
- data {
+ data-pins {
pins = "gpio39", "gpio40", "gpio41", "gpio42";
function = "sdc3";
drive-strength = <8>;