diff mbox series

[RESEND,1/7] arm64: dts: qcom: sdm845: commonize bluetooth UART pinmux

Message ID 20221016144714.1742824-2-kc@postmarketos.org
State New
Headers
Series arm64: dts: qcom: sdm845: commonize bluetooth pinconf |

Commit Message

Caleb Connolly Oct. 16, 2022, 2:47 p.m. UTC 
  From: Caleb Connolly <caleb@connolly.tech>

The 4-pin configuration for UART6 is used for all or almost all SDM845
devices with built in Bluetooth. Move the pinmux configuration to
sdm845.dtsi in preparation to be removed from individual devices in
future patches.

Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
---
 arch/arm64/boot/dts/qcom/sdm845.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index f0e286715d1b..8c69942b969b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2971,6 +2971,29 @@  pinmux {
 				};
 			};
 
+			qup_uart6_4pin: qup-uart6-4pin {
+				pinmux {
+					pins = "gpio45", "gpio46", "gpio47", "gpio48";
+					function = "qup6";
+				};
+
+				cts {
+					pins = "gpio45";
+					bias-pull-down;
+				};
+
+				rts-tx {
+					pins = "gpio46", "gpio47";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				rx {
+					pins = "gpio48";
+					bias-pull-up;
+				};
+			};
+
 			qup_uart7_default: qup-uart7-default {
 				pinmux {
 					pins = "gpio95", "gpio96";