diff mbox series

staging: rtl8192e: Added spaces around operators in rtl_cam.c/rtl_eeprom.c

Message ID 20221015165023.487200-1-danijel.korent@gmail.com
State New
Headers
Series staging: rtl8192e: Added spaces around operators in rtl_cam.c/rtl_eeprom.c |

Commit Message

Danijel Korent Oct. 15, 2022, 4:50 p.m. UTC 
  Fixed "spaces preferred around operator" type of problems reported by
checkpatch

Signed-off-by: Danijel Korent <danijel.korent@gmail.com>
---
 drivers/staging/rtl8192e/rtl8192e/rtl_cam.c   | 23 +++++++++----------
 .../staging/rtl8192e/rtl8192e/rtl_eeprom.c    |  2 +-
 2 files changed, 12 insertions(+), 13 deletions(-)
diff mbox series

Patch

diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c b/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c
index 41faeb4b9b9b..671a64b04a8b 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_cam.c
@@ -17,7 +17,7 @@  void rtl92e_cam_reset(struct net_device *dev)
 {
 	u32 ulcommand = 0;
 
-	ulcommand |= BIT31|BIT30;
+	ulcommand |= BIT31 | BIT30;
 	rtl92e_writel(dev, RWCAM, ulcommand);
 }
 
@@ -40,7 +40,6 @@  void rtl92e_enable_hw_security_config(struct net_device *dev)
 		SECR_value |= SCR_TxUseDK;
 	}
 
-
 	ieee->hwsec_active = 1;
 	if ((ieee->pHTInfo->iot_action & HT_IOT_ACT_PURE_N_MODE) || !hwwep) {
 		ieee->hwsec_active = 0;
@@ -100,33 +99,33 @@  void rtl92e_set_key(struct net_device *dev, u8 EntryNo, u8 KeyIndex,
 	}
 
 	if (DefaultKey)
-		usConfig |= BIT15 | (KeyType<<2);
+		usConfig |= BIT15 | (KeyType << 2);
 	else
-		usConfig |= BIT15 | (KeyType<<2) | KeyIndex;
+		usConfig |= BIT15 | (KeyType << 2) | KeyIndex;
 
 
 	for (i = 0; i < CAM_CONTENT_COUNT; i++) {
 		TargetCommand  = i + CAM_CONTENT_COUNT * EntryNo;
-		TargetCommand |= BIT31|BIT16;
+		TargetCommand |= BIT31 | BIT16;
 
 		if (i == 0) {
-			TargetContent = (u32)(*(MacAddr+0)) << 16 |
-				(u32)(*(MacAddr+1)) << 24 |
+			TargetContent = (u32)(*(MacAddr + 0)) << 16 |
+				(u32)(*(MacAddr + 1)) << 24 |
 				(u32)usConfig;
 
 			rtl92e_writel(dev, WCAMI, TargetContent);
 			rtl92e_writel(dev, RWCAM, TargetCommand);
 		} else if (i == 1) {
-			TargetContent = (u32)(*(MacAddr+2)) |
-				(u32)(*(MacAddr+3)) <<  8 |
-				(u32)(*(MacAddr+4)) << 16 |
-				(u32)(*(MacAddr+5)) << 24;
+			TargetContent = (u32)(*(MacAddr + 2)) |
+				(u32)(*(MacAddr + 3)) <<  8 |
+				(u32)(*(MacAddr + 4)) << 16 |
+				(u32)(*(MacAddr + 5)) << 24;
 			rtl92e_writel(dev, WCAMI, TargetContent);
 			rtl92e_writel(dev, RWCAM, TargetCommand);
 		} else {
 			if (KeyContent != NULL) {
 				rtl92e_writel(dev, WCAMI,
-					      (u32)(*(KeyContent+i-2)));
+					      (u32)(*(KeyContent + i - 2)));
 				rtl92e_writel(dev, RWCAM, TargetCommand);
 				udelay(100);
 			}
diff --git a/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c b/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c
index 59532ed2156d..db57c655c695 100644
--- a/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c
+++ b/drivers/staging/rtl8192e/rtl8192e/rtl_eeprom.c
@@ -79,6 +79,6 @@  u32 rtl92e_eeprom_read(struct net_device *dev, u32 addr)
 		ret = _rtl92e_eeprom_xfer(dev, (addr & 0x3F) | (0x6 << 6), 9);
 
 	rtl92e_writeb(dev, EPROM_CMD,
-		      (EPROM_CMD_NORMAL<<EPROM_CMD_OPERATING_MODE_SHIFT));
+		      (EPROM_CMD_NORMAL << EPROM_CMD_OPERATING_MODE_SHIFT));
 	return ret;
 }