[v8,3/3] mmc: sdhci-tegra: Issue CMD and DAT resets together
Commit Message
In case of error condition to avoid system crash
Tegra SDMMC controller requires CMD and DAT resets
issued together. SDHCI controller FSM goes into
bad state due to rapid SD card hot-plug event.
Issuing reset on the CMD FSM before DATA FSM results
in kernel panic, hence add support to issue CMD and
DAT resets together.
This is applicable to Tegra186 and later chips.
Signed-off-by: Aniruddha TVS Rao <anrao@nvidia.com>
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Thierry Reding <treding@nvidia.com>
---
drivers/mmc/host/sdhci-tegra.c | 3 ++-
drivers/mmc/host/sdhci.c | 5 +++++
drivers/mmc/host/sdhci.h | 2 ++
3 files changed, 9 insertions(+), 1 deletion(-)
@@ -1535,7 +1535,8 @@ static const struct sdhci_pltfm_data sdhci_tegra186_pdata = {
SDHCI_QUIRK_NO_HISPD_BIT |
SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC |
SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
- .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN,
+ .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN |
+ SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER,
.ops = &tegra186_sdhci_ops,
};
@@ -270,6 +270,11 @@ enum sdhci_reset_reason {
static void sdhci_reset_for_reason(struct sdhci_host *host, enum sdhci_reset_reason reason)
{
+ if (host->quirks2 &
+ SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER) {
+ sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
+ return;
+ }
switch (reason) {
case SDHCI_RESET_FOR_INIT:
sdhci_do_reset(host, SDHCI_RESET_CMD | SDHCI_RESET_DATA);
@@ -478,6 +478,8 @@ struct sdhci_host {
* block count.
*/
#define SDHCI_QUIRK2_USE_32BIT_BLK_CNT (1<<18)
+/* Issue CMD and DATA reset together */
+#define SDHCI_QUIRK2_ISSUE_CMD_DAT_RESET_TOGETHER (1<<19)
int irq; /* Device IRQ */
void __iomem *ioaddr; /* Mapped address */