new file mode 100644
@@ -0,0 +1,128 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/qcom,ipc-rpm-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPC RPM regulator
+
+description:
+ The Qualcomm RPM over IPC regulator is modelled as a subdevice of the RPM.
+
+ Please refer to Documentation/devicetree/bindings/soc/qcom/qcom,ipc-rpm.yaml
+ for information regarding the RPM node.
+
+ The regulator node houses sub-nodes for each regulator within the device.
+ Each sub-node is identified using the node's name, with valid values listed
+ for each of the pmics below.
+
+ For pm8058 l0, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11, l12, l13, l14, l15,
+ l16, l17, l18, l19, l20, l21, l22, l23, l24, l25, s0, s1, s2, s3, s4,
+ lvs0, lvs1, ncp
+
+ For pm8901 l0, l1, l2, l3, l4, l5, l6, s0, s1, s2, s3, s4, lvs0, lvs1, lvs2, lvs3,
+ mvs
+
+ For pm8921 s1, s2, s3, s4, s7, s8, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, l15, l16, l17, l18, l21, l22, l23, l24, l25, l26, l27, l28,
+ l29, lvs1, lvs2, lvs3, lvs4, lvs5, lvs6, lvs7, usb-switch, hdmi-switch,
+ ncp
+
+ For pm8018 s1, s2, s3, s4, s5, l1, l2, l3, l4, l5, l6, l7, l8, l9, l10, l11,
+ l12, l14, lvs1
+
+ For smb208 s1a, s1b, s2a, s2b
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+
+properties:
+ compatible:
+ enum:
+ - qcom,rpm-pm8058-regulators
+ - qcom,rpm-pm8901-regulators
+ - qcom,rpm-pm8921-regulators
+ - qcom,rpm-pm8018-regulators
+ - qcom,rpm-smb208-regulators
+
+patternProperties:
+ ".*-supply$":
+ description: Input supply phandle(s) for this node
+
+ "^((s|l|lvs)[0-9]*)|(s[1-2][a-b])|(ncp)|(mvs)|(usb-switch)|(hdmi-switch)$":
+ description: List of regulators and its properties
+ $ref: regulator.yaml#
+ unevaluatedProperties: false
+ properties:
+ bias-pull-down:
+ description: enable pull down of the regulator when inactive
+ type: boolean
+
+ qcom,switch-mode-frequency:
+ description: Frequency (Hz) of the switch-mode power supply
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 19200000
+ - 9600000
+ - 6400000
+ - 4800000
+ - 3840000
+ - 3200000
+ - 2740000
+ - 2400000
+ - 2130000
+ - 1920000
+ - 1750000
+ - 1600000
+ - 1480000
+ - 1370000
+ - 1280000
+ - 1200000
+
+ qcom,force-mode:
+ description: Indicates that the regulator should be forced to a particular mode
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum:
+ - 0 # QCOM_RPM_FORCE_MODE_NONE do not force any mode
+ - 1 # QCOM_RPM_FORCE_MODE_LPM force into low power mode
+ - 2 # QCOM_RPM_FORCE_MODE_HPM force into high power mode
+ - 3 # QCOM_RPM_FORCE_MODE_AUTO allow regulator to automatically select its own mode
+ # based on realtime current draw, only for pm8921 smps and ftsmps
+
+ qcom,power-mode-hysteretic:
+ description: select that the power supply should operate in hysteretic mode,
+ instead of the default pwm mode
+ type: boolean
+
+additionalProperties: false
+
+required:
+ - compatible
+
+examples:
+ - |
+ #include <dt-bindings/mfd/qcom-rpm.h>
+ regulators {
+ compatible = "qcom,rpm-pm8921-regulators";
+ vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+
+ s1 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+
+ bias-pull-down;
+
+ qcom,switch-mode-frequency = <3200000>;
+ };
+
+ pm8921_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ qcom,switch-mode-frequency = <1600000>;
+ bias-pull-down;
+
+ qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+ };
+ };
+...