[RESEND,v2,5/8] media: uvcvideo: Quirk for autosuspend in Logi C910

Message ID 20220920-resend-hwtimestamp-v2-5-0d7978a817cc@chromium.org
State New
Headers
Series uvcvideo: Fixes for hw timestamping |

Commit Message

Ricardo Ribalda Dec. 2, 2022, 5:02 p.m. UTC
  Logitech C910 firmware is unable to recover from a usb autosuspend. When
it resumes, the device is in a state where it only produces invalid
frames. Eg:

$ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
$ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
[350438.435219] uvcvideo: uvc_v4l2_open
[350438.529794] uvcvideo: Resuming interface 2
[350438.529801] uvcvideo: Resuming interface 3
[350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
[350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
[350438.551496] uvcvideo: uvc_v4l2_mmap
[350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
[350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
[350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
[350439.316468] uvcvideo: Marking buffer as bad (error bit set).
[350439.316475] uvcvideo: Frame complete (EOF found).
[350439.316477] uvcvideo: EOF in empty payload.
[350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
[350439.384510] uvcvideo: Marking buffer as bad (error bit set).
[350439.384516] uvcvideo: Frame complete (EOF found).
[350439.384518] uvcvideo: EOF in empty payload.
[350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
[350439.448472] uvcvideo: Marking buffer as bad (error bit set).
[350439.448478] uvcvideo: Frame complete (EOF found).
[350439.448480] uvcvideo: EOF in empty payload.
[350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
...(loop)...

The devices can leave this invalid state if its altstate is toggled.

This patch addes a quirk for this device so it can be autosuspended
properly.

lsusb -v:
Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
Device Descriptor:
  bLength                18
  bDescriptorType         1
  bcdUSB               2.00
  bDeviceClass          239 Miscellaneous Device
  bDeviceSubClass         2
  bDeviceProtocol         1 Interface Association
  bMaxPacketSize0        64
  idVendor           0x046d Logitech, Inc.
  idProduct          0x0821 HD Webcam C910
  bcdDevice            0.10
  iManufacturer           0
  iProduct                0
  iSerial                 1 390022B0
  bNumConfigurations      1

Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
---
 drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++
 drivers/media/usb/uvc/uvc_video.c  |  5 +++++
 drivers/media/usb/uvc/uvcvideo.h   |  1 +
 3 files changed, 24 insertions(+)
  

Comments

Laurent Pinchart Dec. 30, 2022, 1:52 p.m. UTC | #1
Hi Ricardo,

Thank you for the patch.

s/C910/B910 and C910/ in the subject line.

On Fri, Dec 02, 2022 at 06:02:45PM +0100, Ricardo Ribalda wrote:
> Logitech C910 firmware is unable to recover from a usb autosuspend. When

s/C910/B910 and C910/
s/usb/USB/

> it resumes, the device is in a state where it only produces invalid
> frames. Eg:
> 
> $ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
> $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1

Is this true for YUYV frames too ?

> [350438.435219] uvcvideo: uvc_v4l2_open
> [350438.529794] uvcvideo: Resuming interface 2
> [350438.529801] uvcvideo: Resuming interface 3
> [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
> [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
> [350438.551496] uvcvideo: uvc_v4l2_mmap
> [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
> [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
> [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
> [350439.316468] uvcvideo: Marking buffer as bad (error bit set).
> [350439.316475] uvcvideo: Frame complete (EOF found).
> [350439.316477] uvcvideo: EOF in empty payload.
> [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
> [350439.384510] uvcvideo: Marking buffer as bad (error bit set).
> [350439.384516] uvcvideo: Frame complete (EOF found).
> [350439.384518] uvcvideo: EOF in empty payload.
> [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
> [350439.448472] uvcvideo: Marking buffer as bad (error bit set).
> [350439.448478] uvcvideo: Frame complete (EOF found).
> [350439.448480] uvcvideo: EOF in empty payload.
> [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
> ...(loop)...
> 
> The devices can leave this invalid state if its altstate is toggled.

s/its altstate/the alternate setting of the streaming interface/

How did you figure this out ?

> This patch addes a quirk for this device so it can be autosuspended
> properly.
> 
> lsusb -v:
> Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
> Device Descriptor:
>   bLength                18
>   bDescriptorType         1
>   bcdUSB               2.00
>   bDeviceClass          239 Miscellaneous Device
>   bDeviceSubClass         2
>   bDeviceProtocol         1 Interface Association
>   bMaxPacketSize0        64
>   idVendor           0x046d Logitech, Inc.
>   idProduct          0x0821 HD Webcam C910
>   bcdDevice            0.10
>   iManufacturer           0
>   iProduct                0
>   iSerial                 1 390022B0
>   bNumConfigurations      1
> 
> Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> ---
>  drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++
>  drivers/media/usb/uvc/uvc_video.c  |  5 +++++
>  drivers/media/usb/uvc/uvcvideo.h   |  1 +
>  3 files changed, 24 insertions(+)
> 
> diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> index 4512316c8748..d2a158a1ce35 100644
> --- a/drivers/media/usb/uvc/uvc_driver.c
> +++ b/drivers/media/usb/uvc/uvc_driver.c
> @@ -2823,6 +2823,24 @@ static const struct usb_device_id uvc_ids[] = {
>  	  .bInterfaceSubClass	= 1,
>  	  .bInterfaceProtocol	= 0,
>  	  .driver_info		= (kernel_ulong_t)&uvc_quirk_probe_minmax },
> +	/* Logitech, Webcam C910 */
> +	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
> +				| USB_DEVICE_ID_MATCH_INT_INFO,
> +	  .idVendor		= 0x046d,
> +	  .idProduct		= 0x0821,
> +	  .bInterfaceClass	= USB_CLASS_VIDEO,
> +	  .bInterfaceSubClass	= 1,
> +	  .bInterfaceProtocol	= 0,
> +	  .driver_info		= UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
> +	/* Logitech, Webcam B910 */
> +	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
> +				| USB_DEVICE_ID_MATCH_INT_INFO,
> +	  .idVendor		= 0x046d,
> +	  .idProduct		= 0x0823,
> +	  .bInterfaceClass	= USB_CLASS_VIDEO,
> +	  .bInterfaceSubClass	= 1,
> +	  .bInterfaceProtocol	= 0,
> +	  .driver_info		= UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
>  	/* Logitech Quickcam Fusion */
>  	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
>  				| USB_DEVICE_ID_MATCH_INT_INFO,
> diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> index d387d6335344..75c32e232f5d 100644
> --- a/drivers/media/usb/uvc/uvc_video.c
> +++ b/drivers/media/usb/uvc/uvc_video.c
> @@ -1983,6 +1983,11 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream,
>  			"Selecting alternate setting %u (%u B/frame bandwidth)\n",
>  			altsetting, best_psize);
>  

Please add a comment to explain the issue.

> +		if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) {
> +			usb_set_interface(stream->dev->udev, intfnum,
> +					  altsetting);
> +			usb_set_interface(stream->dev->udev, intfnum, 0);
> +		}

Missing blank line.

>  		ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
>  		if (ret < 0)
>  			return ret;
> diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> index e41289605d0e..14daa7111953 100644
> --- a/drivers/media/usb/uvc/uvcvideo.h
> +++ b/drivers/media/usb/uvc/uvcvideo.h
> @@ -214,6 +214,7 @@
>  #define UVC_QUIRK_FORCE_BPP		0x00001000
>  #define UVC_QUIRK_IGNORE_EMPTY_TS	0x00002000
>  #define UVC_QUIRK_INVALID_DEVICE_SOF	0x00004000
> +#define UVC_QUIRK_WAKE_AUTOSUSPEND	0x00008000
>  
>  /* Format flags */
>  #define UVC_FMT_FLAG_COMPRESSED		0x00000001
>
  
Ricardo Ribalda Jan. 3, 2023, 4:13 p.m. UTC | #2
Hi Laurent

On Fri, 30 Dec 2022 at 14:52, Laurent Pinchart
<laurent.pinchart@ideasonboard.com> wrote:
>
> Hi Ricardo,
>
> Thank you for the patch.
>
> s/C910/B910 and C910/ in the subject line.
>
> On Fri, Dec 02, 2022 at 06:02:45PM +0100, Ricardo Ribalda wrote:
> > Logitech C910 firmware is unable to recover from a usb autosuspend. When
>
> s/C910/B910 and C910/
> s/usb/USB/
>
> > it resumes, the device is in a state where it only produces invalid
> > frames. Eg:
> >
> > $ echo 0xFFFF > /sys/module/uvcvideo/parameters/trace # enable verbose log
> > $ yavta -c1 -n1 --file='frame#.jpg' --format MJPEG --size=1920x1080 /dev/video1
>
> Is this true for YUYV frames too ?

I believe so. This is just the script that I typically use to play
with my cameras.

>
> > [350438.435219] uvcvideo: uvc_v4l2_open
> > [350438.529794] uvcvideo: Resuming interface 2
> > [350438.529801] uvcvideo: Resuming interface 3
> > [350438.529991] uvcvideo: Trying format 0x47504a4d (MJPG): 1920x1080.
> > [350438.529996] uvcvideo: Using default frame interval 33333.3 us (30.0 fps).
> > [350438.551496] uvcvideo: uvc_v4l2_mmap
> > [350438.555890] uvcvideo: Device requested 3060 B/frame bandwidth.
> > [350438.555896] uvcvideo: Selecting alternate setting 11 (3060 B/frame bandwidth).
> > [350438.556362] uvcvideo: Allocated 5 URB buffers of 32x3060 bytes each.
> > [350439.316468] uvcvideo: Marking buffer as bad (error bit set).
> > [350439.316475] uvcvideo: Frame complete (EOF found).
> > [350439.316477] uvcvideo: EOF in empty payload.
> > [350439.316484] uvcvideo: frame 1 stats: 149/261/417 packets, 1/149/417 pts (early initial), 416/417 scr, last pts/stc/sof 2976325734/2978107243/249
> > [350439.384510] uvcvideo: Marking buffer as bad (error bit set).
> > [350439.384516] uvcvideo: Frame complete (EOF found).
> > [350439.384518] uvcvideo: EOF in empty payload.
> > [350439.384525] uvcvideo: frame 2 stats: 265/379/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2979524454/2981305193/316
> > [350439.448472] uvcvideo: Marking buffer as bad (error bit set).
> > [350439.448478] uvcvideo: Frame complete (EOF found).
> > [350439.448480] uvcvideo: EOF in empty payload.
> > [350439.448487] uvcvideo: frame 3 stats: 265/377/533 packets, 1/265/533 pts (early initial), 532/533 scr, last pts/stc/sof 2982723174/2984503144/382
> > ...(loop)...
> >
> > The devices can leave this invalid state if its altstate is toggled.
>
> s/its altstate/the alternate setting of the streaming interface/
>
> How did you figure this out ?

A deterministic process, where we analysed all the variables involved
in the streaming process....
(aka, educated guess + luck + trial and error :P)

I triggered a whole reconfiguration of the device and that worked, and
then I started removing parts of it until I ended up with the minimum
thing that made the device work.

>
> > This patch addes a quirk for this device so it can be autosuspended
> > properly.
> >
> > lsusb -v:
> > Bus 001 Device 049: ID 046d:0821 Logitech, Inc. HD Webcam C910
> > Device Descriptor:
> >   bLength                18
> >   bDescriptorType         1
> >   bcdUSB               2.00
> >   bDeviceClass          239 Miscellaneous Device
> >   bDeviceSubClass         2
> >   bDeviceProtocol         1 Interface Association
> >   bMaxPacketSize0        64
> >   idVendor           0x046d Logitech, Inc.
> >   idProduct          0x0821 HD Webcam C910
> >   bcdDevice            0.10
> >   iManufacturer           0
> >   iProduct                0
> >   iSerial                 1 390022B0
> >   bNumConfigurations      1
> >
> > Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
> > ---
> >  drivers/media/usb/uvc/uvc_driver.c | 18 ++++++++++++++++++
> >  drivers/media/usb/uvc/uvc_video.c  |  5 +++++
> >  drivers/media/usb/uvc/uvcvideo.h   |  1 +
> >  3 files changed, 24 insertions(+)
> >
> > diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
> > index 4512316c8748..d2a158a1ce35 100644
> > --- a/drivers/media/usb/uvc/uvc_driver.c
> > +++ b/drivers/media/usb/uvc/uvc_driver.c
> > @@ -2823,6 +2823,24 @@ static const struct usb_device_id uvc_ids[] = {
> >         .bInterfaceSubClass   = 1,
> >         .bInterfaceProtocol   = 0,
> >         .driver_info          = (kernel_ulong_t)&uvc_quirk_probe_minmax },
> > +     /* Logitech, Webcam C910 */
> > +     { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
> > +                             | USB_DEVICE_ID_MATCH_INT_INFO,
> > +       .idVendor             = 0x046d,
> > +       .idProduct            = 0x0821,
> > +       .bInterfaceClass      = USB_CLASS_VIDEO,
> > +       .bInterfaceSubClass   = 1,
> > +       .bInterfaceProtocol   = 0,
> > +       .driver_info          = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
> > +     /* Logitech, Webcam B910 */
> > +     { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
> > +                             | USB_DEVICE_ID_MATCH_INT_INFO,
> > +       .idVendor             = 0x046d,
> > +       .idProduct            = 0x0823,
> > +       .bInterfaceClass      = USB_CLASS_VIDEO,
> > +       .bInterfaceSubClass   = 1,
> > +       .bInterfaceProtocol   = 0,
> > +       .driver_info          = UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
> >       /* Logitech Quickcam Fusion */
> >       { .match_flags          = USB_DEVICE_ID_MATCH_DEVICE
> >                               | USB_DEVICE_ID_MATCH_INT_INFO,
> > diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
> > index d387d6335344..75c32e232f5d 100644
> > --- a/drivers/media/usb/uvc/uvc_video.c
> > +++ b/drivers/media/usb/uvc/uvc_video.c
> > @@ -1983,6 +1983,11 @@ static int uvc_video_start_transfer(struct uvc_streaming *stream,
> >                       "Selecting alternate setting %u (%u B/frame bandwidth)\n",
> >                       altsetting, best_psize);
> >
>
> Please add a comment to explain the issue.
>
> > +             if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) {
> > +                     usb_set_interface(stream->dev->udev, intfnum,
> > +                                       altsetting);
> > +                     usb_set_interface(stream->dev->udev, intfnum, 0);
> > +             }
>
> Missing blank line.
>
> >               ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
> >               if (ret < 0)
> >                       return ret;
> > diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
> > index e41289605d0e..14daa7111953 100644
> > --- a/drivers/media/usb/uvc/uvcvideo.h
> > +++ b/drivers/media/usb/uvc/uvcvideo.h
> > @@ -214,6 +214,7 @@
> >  #define UVC_QUIRK_FORCE_BPP          0x00001000
> >  #define UVC_QUIRK_IGNORE_EMPTY_TS    0x00002000
> >  #define UVC_QUIRK_INVALID_DEVICE_SOF 0x00004000
> > +#define UVC_QUIRK_WAKE_AUTOSUSPEND   0x00008000
> >
> >  /* Format flags */
> >  #define UVC_FMT_FLAG_COMPRESSED              0x00000001
> >
>
> --
> Regards,
>
> Laurent Pinchart
  

Patch

diff --git a/drivers/media/usb/uvc/uvc_driver.c b/drivers/media/usb/uvc/uvc_driver.c
index 4512316c8748..d2a158a1ce35 100644
--- a/drivers/media/usb/uvc/uvc_driver.c
+++ b/drivers/media/usb/uvc/uvc_driver.c
@@ -2823,6 +2823,24 @@  static const struct usb_device_id uvc_ids[] = {
 	  .bInterfaceSubClass	= 1,
 	  .bInterfaceProtocol	= 0,
 	  .driver_info		= (kernel_ulong_t)&uvc_quirk_probe_minmax },
+	/* Logitech, Webcam C910 */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x046d,
+	  .idProduct		= 0x0821,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
+	/* Logitech, Webcam B910 */
+	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
+				| USB_DEVICE_ID_MATCH_INT_INFO,
+	  .idVendor		= 0x046d,
+	  .idProduct		= 0x0823,
+	  .bInterfaceClass	= USB_CLASS_VIDEO,
+	  .bInterfaceSubClass	= 1,
+	  .bInterfaceProtocol	= 0,
+	  .driver_info		= UVC_INFO_QUIRK(UVC_QUIRK_WAKE_AUTOSUSPEND)},
 	/* Logitech Quickcam Fusion */
 	{ .match_flags		= USB_DEVICE_ID_MATCH_DEVICE
 				| USB_DEVICE_ID_MATCH_INT_INFO,
diff --git a/drivers/media/usb/uvc/uvc_video.c b/drivers/media/usb/uvc/uvc_video.c
index d387d6335344..75c32e232f5d 100644
--- a/drivers/media/usb/uvc/uvc_video.c
+++ b/drivers/media/usb/uvc/uvc_video.c
@@ -1983,6 +1983,11 @@  static int uvc_video_start_transfer(struct uvc_streaming *stream,
 			"Selecting alternate setting %u (%u B/frame bandwidth)\n",
 			altsetting, best_psize);
 
+		if (stream->dev->quirks & UVC_QUIRK_WAKE_AUTOSUSPEND) {
+			usb_set_interface(stream->dev->udev, intfnum,
+					  altsetting);
+			usb_set_interface(stream->dev->udev, intfnum, 0);
+		}
 		ret = usb_set_interface(stream->dev->udev, intfnum, altsetting);
 		if (ret < 0)
 			return ret;
diff --git a/drivers/media/usb/uvc/uvcvideo.h b/drivers/media/usb/uvc/uvcvideo.h
index e41289605d0e..14daa7111953 100644
--- a/drivers/media/usb/uvc/uvcvideo.h
+++ b/drivers/media/usb/uvc/uvcvideo.h
@@ -214,6 +214,7 @@ 
 #define UVC_QUIRK_FORCE_BPP		0x00001000
 #define UVC_QUIRK_IGNORE_EMPTY_TS	0x00002000
 #define UVC_QUIRK_INVALID_DEVICE_SOF	0x00004000
+#define UVC_QUIRK_WAKE_AUTOSUSPEND	0x00008000
 
 /* Format flags */
 #define UVC_FMT_FLAG_COMPRESSED		0x00000001