[v4,2/3] Input: add ABS_SND_PROFILE
Commit Message
ABS_SND_PROFILE used to describe the state of a multi-value sound profile
switch. This will be used for the alert-slider on OnePlus phones or other
phones.
Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
to input-event-codes.h so they can be used from DTS.
Signed-off-by: Gergo Koteles <soyer@irl.hu>
---
Documentation/input/event-codes.rst | 6 ++++++
drivers/hid/hid-debug.c | 1 +
include/uapi/linux/input-event-codes.h | 9 +++++++++
3 files changed, 16 insertions(+)
Comments
On Wed, Feb 22, 2023 at 01:10:33AM +0100, Gergo Koteles wrote:
> ABS_SND_PROFILE used to describe the state of a multi-value sound profile
> switch. This will be used for the alert-slider on OnePlus phones or other
> phones.
>
> Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
> to input-event-codes.h so they can be used from DTS.
>
> Signed-off-by: Gergo Koteles <soyer@irl.hu>
> ---
> Documentation/input/event-codes.rst | 6 ++++++
> drivers/hid/hid-debug.c | 1 +
> include/uapi/linux/input-event-codes.h | 9 +++++++++
> 3 files changed, 16 insertions(+)
>
> diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst
> index b4557462edd7..d43336e64d6a 100644
> --- a/Documentation/input/event-codes.rst
> +++ b/Documentation/input/event-codes.rst
> @@ -241,6 +241,12 @@ A few EV_ABS codes have special meanings:
> emitted only when the selected profile changes, indicating the newly
> selected profile value.
>
> +* ABS_SND_PROFILE:
> +
> + - Used to describe the state of a multi-value sound profile switch.
> + An event is emitted only when the selected profile changes,
> + indicating the newly selected profile value.
> +
> * ABS_MT_<name>:
>
> - Used to describe multitouch input events. Please see
> diff --git a/drivers/hid/hid-debug.c b/drivers/hid/hid-debug.c
> index e213bdde543a..76fb2ecbbc51 100644
> --- a/drivers/hid/hid-debug.c
> +++ b/drivers/hid/hid-debug.c
> @@ -1018,6 +1018,7 @@ static const char *absolutes[ABS_CNT] = {
> [ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt",
> [ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "ToolWidth",
> [ABS_VOLUME] = "Volume", [ABS_PROFILE] = "Profile",
> + [ABS_SND_PROFILE] = "SoundProfile",
> [ABS_MISC] = "Misc",
> [ABS_MT_TOUCH_MAJOR] = "MTMajor",
> [ABS_MT_TOUCH_MINOR] = "MTMinor",
> diff --git a/include/uapi/linux/input-event-codes.h b/include/uapi/linux/input-event-codes.h
> index 022a520e31fc..e8d5ee027b40 100644
> --- a/include/uapi/linux/input-event-codes.h
> +++ b/include/uapi/linux/input-event-codes.h
> @@ -866,6 +866,7 @@
>
> #define ABS_VOLUME 0x20
> #define ABS_PROFILE 0x21
> +#define ABS_SND_PROFILE 0x22
>
> #define ABS_MISC 0x28
>
> @@ -974,4 +975,12 @@
> #define SND_MAX 0x07
> #define SND_CNT (SND_MAX+1)
>
> +/*
> + * ABS_SND_PROFILE values
> + */
> +
> +#define SND_PROFILE_SILENT 0x00
> +#define SND_PROFILE_VIBRATE 0x01
> +#define SND_PROFILE_RING 0x02
The patch looks good to me, bu I'd need these header file additions in
order to merge the dts patch. Could I get an ack and take it through the
Qualocmm tree, or could you pick it up for 6.4, and then I can merge the
dts change after that?
Regards,
Bjorn
> +
> #endif
> --
> 2.39.2
>
On 07/04/2023 18:11, Bjorn Andersson wrote:
> On Wed, Feb 22, 2023 at 01:10:33AM +0100, Gergo Koteles wrote:
>> ABS_SND_PROFILE used to describe the state of a multi-value sound profile
>> switch. This will be used for the alert-slider on OnePlus phones or other
>> phones.
>>
>> Profile values added as SND_PROFLE_(SILENT|VIBRATE|RING) identifiers
>> to input-event-codes.h so they can be used from DTS.
>>
>> Signed-off-by: Gergo Koteles <soyer@irl.hu>
>> ---
>> Documentation/input/event-codes.rst | 6 ++++++
>> drivers/hid/hid-debug.c | 1 +
>> include/uapi/linux/input-event-codes.h | 9 +++++++++
>> 3 files changed, 16 insertions(+)
>>
>> diff --git a/Documentation/input/event-codes.rst b/Documentation/input/event-codes.rst
>> index b4557462edd7..d43336e64d6a 100644
>> --- a/Documentation/input/event-codes.rst
>> +++ b/Documentation/input/event-codes.rst
>> @@ -241,6 +241,12 @@ A few EV_ABS codes have special meanings:
>> emitted only when the selected profile changes, indicating the newly
>> selected profile value.
>>
...
>>
>> +/*
>> + * ABS_SND_PROFILE values
>> + */
>> +
>> +#define SND_PROFILE_SILENT 0x00
>> +#define SND_PROFILE_VIBRATE 0x01
>> +#define SND_PROFILE_RING 0x02
>
> The patch looks good to me, bu I'd need these header file additions in
> order to merge the dts patch. Could I get an ack and take it through the
> Qualocmm tree, or could you pick it up for 6.4, and then I can merge the
> dts change after that?
Bump, I think this might have gotten lost.
>
> Regards,
> Bjorn
>
>> +
>> #endif
>> --
>> 2.39.2
>>
@@ -241,6 +241,12 @@ A few EV_ABS codes have special meanings:
emitted only when the selected profile changes, indicating the newly
selected profile value.
+* ABS_SND_PROFILE:
+
+ - Used to describe the state of a multi-value sound profile switch.
+ An event is emitted only when the selected profile changes,
+ indicating the newly selected profile value.
+
* ABS_MT_<name>:
- Used to describe multitouch input events. Please see
@@ -1018,6 +1018,7 @@ static const char *absolutes[ABS_CNT] = {
[ABS_DISTANCE] = "Distance", [ABS_TILT_X] = "XTilt",
[ABS_TILT_Y] = "YTilt", [ABS_TOOL_WIDTH] = "ToolWidth",
[ABS_VOLUME] = "Volume", [ABS_PROFILE] = "Profile",
+ [ABS_SND_PROFILE] = "SoundProfile",
[ABS_MISC] = "Misc",
[ABS_MT_TOUCH_MAJOR] = "MTMajor",
[ABS_MT_TOUCH_MINOR] = "MTMinor",
@@ -866,6 +866,7 @@
#define ABS_VOLUME 0x20
#define ABS_PROFILE 0x21
+#define ABS_SND_PROFILE 0x22
#define ABS_MISC 0x28
@@ -974,4 +975,12 @@
#define SND_MAX 0x07
#define SND_CNT (SND_MAX+1)
+/*
+ * ABS_SND_PROFILE values
+ */
+
+#define SND_PROFILE_SILENT 0x00
+#define SND_PROFILE_VIBRATE 0x01
+#define SND_PROFILE_RING 0x02
+
#endif