[v2,7/8] ACPI: thermal: Rework thermal_get_trend()

Message ID 1849104.atdPhlSkOF@kreacher
State New
Headers
Series ACPI: thermal: Use trip point table to register thermal zones |

Commit Message

Rafael J. Wysocki July 21, 2023, 3:08 p.m. UTC
  From: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

Rework the ACPI thermal driver's .get_trend() callback function,
thermal_get_trend(), to use trip point data stored in the generic
trip structures instead of calling thermal_get_trip_type() and
thermal_get_trip_temp().

Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
---

v1 -> v2:
   * Do not acquire thermal_check_lock in thermal_get_trend() (lockdep
     would complain about this, because it is hold around thermal zone
     locking and .get_trend() runs under the thermal zone lock).  The
     thermal zone locking added in the previous patches is sufficient
     to protect this code.
   * Check trips against invalid temperature values.
   * Return an error for trips other than passive and active.

---
 drivers/acpi/thermal.c |  106 ++++++++++++++++++++++++++++++++++++-------------
 1 file changed, 78 insertions(+), 28 deletions(-)
  

Patch

Index: linux-pm/drivers/acpi/thermal.c
===================================================================
--- linux-pm.orig/drivers/acpi/thermal.c
+++ linux-pm/drivers/acpi/thermal.c
@@ -577,47 +577,97 @@  static int thermal_get_crit_temp(struct
 	return -EINVAL;
 }
 
-static int thermal_get_trend(struct thermal_zone_device *thermal,
-			     int trip, enum thermal_trend *trend)
+static struct thermal_trip *acpi_thermal_get_trip(struct acpi_thermal *tz,
+						  int trip_index)
 {
-	struct acpi_thermal *tz = thermal_zone_device_priv(thermal);
-	enum thermal_trip_type type;
+	struct thermal_trip *trip;
 	int i;
 
-	if (thermal_get_trip_type(thermal, trip, &type))
-		return -EINVAL;
+	if (!tz || trip_index < 0)
+		return NULL;
 
-	if (type == THERMAL_TRIP_ACTIVE) {
-		int trip_temp;
-		int temp = deci_kelvin_to_millicelsius_with_offset(
-					tz->temperature, tz->kelvin_offset);
-		if (thermal_get_trip_temp(thermal, trip, &trip_temp))
-			return -EINVAL;
+	trip = tz->trips.critical.trip_ref.trip;
+	if (trip) {
+		if (!trip_index)
+			return trip;
 
-		if (temp > trip_temp) {
-			*trend = THERMAL_TREND_RAISING;
-			return 0;
-		} else {
-			/* Fall back on default trend */
-			return -EINVAL;
+		trip_index--;
+	}
+
+	trip = tz->trips.hot.trip_ref.trip;
+	if (trip) {
+		if (!trip_index)
+			return trip;
+
+		trip_index--;
+	}
+
+	trip = tz->trips.passive.trip_ref.trip;
+	if (trip) {
+		if (!trip_index)
+			return trip;
+
+		trip_index--;
+	}
+
+	for (i = 0; i < ACPI_THERMAL_MAX_ACTIVE; i++) {
+		trip = tz->trips.active[i].trip_ref.trip;
+		if (trip) {
+			if (!trip_index)
+				return trip;
+
+			trip_index--;
 		}
 	}
 
+	return NULL;
+}
+
+static int thermal_get_trend(struct thermal_zone_device *thermal,
+			     int trip_index, enum thermal_trend *trend)
+{
+	struct acpi_thermal *tz = thermal_zone_device_priv(thermal);
+	struct thermal_trip *trip;
+	long t;
+
+	trip = acpi_thermal_get_trip(tz, trip_index);
+	if (!trip || trip->temperature == THERMAL_TEMP_INVALID)
+		return -EINVAL;
+
 	/*
 	 * tz->temperature has already been updated by generic thermal layer,
-	 * before this callback being invoked
+	 * before this callback being invoked.
 	 */
-	i = tz->trips.passive.tc1 * (tz->temperature - tz->last_temperature) +
-	    tz->trips.passive.tc2 * (tz->temperature - tz->trips.passive.temperature);
+	switch (trip->type) {
+	case THERMAL_TRIP_PASSIVE:
+		t = tz->trips.passive.tc1 * (tz->temperature -
+						tz->last_temperature) +
+			tz->trips.passive.tc2 * (tz->temperature -
+						tz->trips.passive.temperature);
+		if (t > 0)
+			*trend = THERMAL_TREND_RAISING;
+		else if (t < 0)
+			*trend = THERMAL_TREND_DROPPING;
+		else
+			*trend = THERMAL_TREND_STABLE;
+
+		return 0;
+
+	case THERMAL_TRIP_ACTIVE:
+		t = deci_kelvin_to_millicelsius_with_offset(tz->temperature,
+							    tz->kelvin_offset);
+		if (t > trip->temperature) {
+			*trend = THERMAL_TREND_RAISING;
+			return 0;
+		}
 
-	if (i > 0)
-		*trend = THERMAL_TREND_RAISING;
-	else if (i < 0)
-		*trend = THERMAL_TREND_DROPPING;
-	else
-		*trend = THERMAL_TREND_STABLE;
+		fallthrough;
 
-	return 0;
+	default:
+		break;
+	}
+
+	return -EINVAL;
 }
 
 static void acpi_thermal_zone_device_hot(struct thermal_zone_device *thermal)