@@ -20956,6 +20956,12 @@ F: Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
F: drivers/phy/starfive/phy-jh7110-pcie.c
F: drivers/phy/starfive/phy-jh7110-usb.c
+STARFIVE JH8100 EXTERNAL INTERRUPT CONTROLLER DRIVER
+M: Changhuang Liang <changhuang.liang@starfivetech.com>
+S: Supported
+F: Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
+F: drivers/irqchip/irq-starfive-jh8100-intc.c
+
STATIC BRANCH/CALL
M: Peter Zijlstra <peterz@infradead.org>
M: Josh Poimboeuf <jpoimboe@kernel.org>
@@ -546,6 +546,17 @@ config SIFIVE_PLIC
select IRQ_DOMAIN_HIERARCHY
select GENERIC_IRQ_EFFECTIVE_AFF_MASK if SMP
+config STARFIVE_JH8100_INTC
+ bool "StarFive JH8100 External Interrupt Controller"
+ depends on ARCH_STARFIVE || COMPILE_TEST
+ default ARCH_STARFIVE
+ select IRQ_DOMAIN_HIERARCHY
+ help
+ This enables support for the INTC chip found in StarFive JH8100
+ SoC.
+
+ If you don't know what to do here, say Y.
+
config EXYNOS_IRQ_COMBINER
bool "Samsung Exynos IRQ combiner support" if COMPILE_TEST
depends on (ARCH_EXYNOS && ARM) || COMPILE_TEST
@@ -96,6 +96,7 @@ obj-$(CONFIG_CSKY_MPINTC) += irq-csky-mpintc.o
obj-$(CONFIG_CSKY_APB_INTC) += irq-csky-apb-intc.o
obj-$(CONFIG_RISCV_INTC) += irq-riscv-intc.o
obj-$(CONFIG_SIFIVE_PLIC) += irq-sifive-plic.o
+obj-$(CONFIG_STARFIVE_JH8100_INTC) += irq-starfive-jh8100-intc.o
obj-$(CONFIG_IMX_IRQSTEER) += irq-imx-irqsteer.o
obj-$(CONFIG_IMX_INTMUX) += irq-imx-intmux.o
obj-$(CONFIG_IMX_MU_MSI) += irq-imx-mu-msi.o
new file mode 100644
@@ -0,0 +1,207 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * StarFive JH8100 External Interrupt Controller driver
+ *
+ * Copyright (C) 2023 StarFive Technology Co., Ltd.
+ *
+ * Author: Changhuang Liang <changhuang.liang@starfivetech.com>
+ */
+
+#define pr_fmt(fmt) "irq-starfive-jh8100: " fmt
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/irq.h>
+#include <linux/irqchip.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/reset.h>
+#include <linux/spinlock.h>
+
+#define STARFIVE_INTC_SRC0_CLEAR 0x10
+#define STARFIVE_INTC_SRC0_MASK 0x14
+#define STARFIVE_INTC_SRC0_INT 0x1c
+
+#define STARFIVE_INTC_SRC_IRQ_NUM 32
+
+struct starfive_irq_chip {
+ void __iomem *base;
+ struct irq_domain *domain;
+ raw_spinlock_t lock;
+};
+
+static void starfive_intc_bit_set(struct starfive_irq_chip *irqc,
+ u32 reg, u32 bit_mask)
+{
+ u32 value;
+
+ value = ioread32(irqc->base + reg);
+ value |= bit_mask;
+ iowrite32(value, irqc->base + reg);
+}
+
+static void starfive_intc_bit_clear(struct starfive_irq_chip *irqc,
+ u32 reg, u32 bit_mask)
+{
+ u32 value;
+
+ value = ioread32(irqc->base + reg);
+ value &= ~bit_mask;
+ iowrite32(value, irqc->base + reg);
+}
+
+static void starfive_intc_unmask(struct irq_data *d)
+{
+ struct starfive_irq_chip *irqc = irq_data_get_irq_chip_data(d);
+
+ raw_spin_lock(&irqc->lock);
+ starfive_intc_bit_clear(irqc, STARFIVE_INTC_SRC0_MASK, BIT(d->hwirq));
+ raw_spin_unlock(&irqc->lock);
+}
+
+static void starfive_intc_mask(struct irq_data *d)
+{
+ struct starfive_irq_chip *irqc = irq_data_get_irq_chip_data(d);
+
+ raw_spin_lock(&irqc->lock);
+ starfive_intc_bit_set(irqc, STARFIVE_INTC_SRC0_MASK, BIT(d->hwirq));
+ raw_spin_unlock(&irqc->lock);
+}
+
+static struct irq_chip intc_dev = {
+ .name = "StarFive JH8100 INTC",
+ .irq_unmask = starfive_intc_unmask,
+ .irq_mask = starfive_intc_mask,
+};
+
+static int starfive_intc_map(struct irq_domain *d, unsigned int irq,
+ irq_hw_number_t hwirq)
+{
+ irq_domain_set_info(d, irq, hwirq, &intc_dev, d->host_data,
+ handle_level_irq, NULL, NULL);
+
+ return 0;
+}
+
+static const struct irq_domain_ops starfive_intc_domain_ops = {
+ .xlate = irq_domain_xlate_onecell,
+ .map = starfive_intc_map,
+};
+
+static void starfive_intc_irq_handler(struct irq_desc *desc)
+{
+ struct starfive_irq_chip *irqc = irq_data_get_irq_handler_data(&desc->irq_data);
+ struct irq_chip *chip = irq_desc_get_chip(desc);
+ unsigned long value;
+ int hwirq;
+
+ chained_irq_enter(chip, desc);
+
+ value = ioread32(irqc->base + STARFIVE_INTC_SRC0_INT);
+ while (value) {
+ hwirq = ffs(value) - 1;
+
+ generic_handle_domain_irq(irqc->domain, hwirq);
+
+ starfive_intc_bit_set(irqc, STARFIVE_INTC_SRC0_CLEAR, BIT(hwirq));
+ starfive_intc_bit_clear(irqc, STARFIVE_INTC_SRC0_CLEAR, BIT(hwirq));
+
+ __clear_bit(hwirq, &value);
+ }
+
+ chained_irq_exit(chip, desc);
+}
+
+static int __init starfive_intc_init(struct device_node *intc,
+ struct device_node *parent)
+{
+ struct starfive_irq_chip *irqc;
+ struct reset_control *rst;
+ struct clk *clk;
+ int parent_irq;
+ int ret;
+
+ irqc = kzalloc(sizeof(*irqc), GFP_KERNEL);
+ if (!irqc)
+ return -ENOMEM;
+
+ irqc->base = of_iomap(intc, 0);
+ if (!irqc->base) {
+ pr_err("Unable to map registers\n");
+ ret = -ENXIO;
+ goto err_free;
+ }
+
+ rst = of_reset_control_get_exclusive(intc, NULL);
+ if (IS_ERR(rst)) {
+ pr_err("Unable to get reset control %pe\n", rst);
+ ret = PTR_ERR(rst);
+ goto err_unmap;
+ }
+
+ clk = of_clk_get(intc, 0);
+ if (IS_ERR(clk)) {
+ pr_err("Unable to get clock %pe\n", clk);
+ ret = PTR_ERR(clk);
+ goto err_reset_put;
+ }
+
+ ret = reset_control_deassert(rst);
+ if (ret)
+ goto err_clk_put;
+
+ ret = clk_prepare_enable(clk);
+ if (ret)
+ goto err_reset_assert;
+
+ raw_spin_lock_init(&irqc->lock);
+
+ irqc->domain = irq_domain_add_linear(intc, STARFIVE_INTC_SRC_IRQ_NUM,
+ &starfive_intc_domain_ops, irqc);
+ if (!irqc->domain) {
+ pr_err("Unable to create IRQ domain\n");
+ ret = -EINVAL;
+ goto err_clk_disable;
+ }
+
+ parent_irq = of_irq_get(intc, 0);
+ if (parent_irq < 0) {
+ pr_err("Failed to get main IRQ: %d\n", parent_irq);
+ ret = parent_irq;
+ goto err_remove_domain;
+ }
+
+ irq_set_chained_handler_and_data(parent_irq, starfive_intc_irq_handler,
+ irqc);
+
+ pr_info("Interrupt controller register, nr_irqs %d\n",
+ STARFIVE_INTC_SRC_IRQ_NUM);
+
+ return 0;
+
+err_remove_domain:
+ irq_domain_remove(irqc->domain);
+err_clk_disable:
+ clk_disable_unprepare(clk);
+err_reset_assert:
+ reset_control_assert(rst);
+err_clk_put:
+ clk_put(clk);
+err_reset_put:
+ reset_control_put(rst);
+err_unmap:
+ iounmap(irqc->base);
+err_free:
+ kfree(irqc);
+ return ret;
+}
+
+IRQCHIP_PLATFORM_DRIVER_BEGIN(starfive_intc)
+IRQCHIP_MATCH("starfive,jh8100-intc", starfive_intc_init)
+IRQCHIP_PLATFORM_DRIVER_END(starfive_intc)
+
+MODULE_DESCRIPTION("StarFive JH8100 External Interrupt Controller");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Changhuang Liang <changhuang.liang@starfivetech.com>");