diff mbox series

[tip:,x86/mtrr] x86/pat: Simplify the PAT programming protocol

Message ID 170843719768.398.8004359782631430331.tip-bot2@tip-bot2
State New
Headers
Series [tip:,x86/mtrr] x86/pat: Simplify the PAT programming protocol |

Commit Message

tip-bot2 for Thomas Gleixner Feb. 20, 2024, 1:53 p.m. UTC 
  The following commit has been merged into the x86/mtrr branch of tip:

Commit-ID:     ffc92cf3db62443c626469ef160f9276f296f6c6
Gitweb:        https://git.kernel.org/tip/ffc92cf3db62443c626469ef160f9276f296f6c6
Author:        Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
AuthorDate:    Wed, 24 Jan 2024 15:06:50 +02:00
Committer:     Borislav Petkov (AMD) <bp@alien8.de>
CommitterDate: Tue, 20 Feb 2024 14:40:51 +01:00

x86/pat: Simplify the PAT programming protocol

The programming protocol for the PAT MSR follows the MTRR programming
protocol. However, this protocol is cumbersome and requires disabling
caching (CR0.CD=1), which is not possible on some platforms.

Specifically, a TDX guest is not allowed to set CR0.CD. It triggers
a #VE exception.

It turns out that the requirement to follow the MTRR programming
protocol for PAT programming is unnecessarily strict. The new Intel
Software Developer Manual (http://www.intel.com/sdm) (December 2023)
relaxes this requirement, please refer to the section titled
"Programming the PAT" for more information.

In short, this section provides an alternative PAT update sequence which
doesn't need to disable caches around the PAT update but only to flush
those caches and TLBs.

The AMD documentation does not link PAT programming to MTRR and is there
fore, fine too.

The kernel only needs to flush the TLB after updating the PAT MSR. The
set_memory code already takes care of flushing the TLB and cache when
changing the memory type of a page.

  [ bp: Expand commit message. ]

Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/20240124130650.496056-1-kirill.shutemov@linux.intel.com
---
 arch/x86/kernel/cpu/cacheinfo.c |  7 ++++---
 arch/x86/mm/pat/memtype.c       |  9 +++------
 2 files changed, 7 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c
index c131c41..78afad5 100644
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -1118,15 +1118,16 @@  static void cache_cpu_init(void)
 	unsigned long flags;
 
 	local_irq_save(flags);
-	cache_disable();
 
-	if (memory_caching_control & CACHE_MTRR)
+	if (memory_caching_control & CACHE_MTRR) {
+		cache_disable();
 		mtrr_generic_set_state();
+		cache_enable();
+	}
 
 	if (memory_caching_control & CACHE_PAT)
 		pat_cpu_init();
 
-	cache_enable();
 	local_irq_restore(flags);
 }
 
diff --git a/arch/x86/mm/pat/memtype.c b/arch/x86/mm/pat/memtype.c
index 0904d7e..0d72183 100644
--- a/arch/x86/mm/pat/memtype.c
+++ b/arch/x86/mm/pat/memtype.c
@@ -240,6 +240,8 @@  void pat_cpu_init(void)
 	}
 
 	wrmsrl(MSR_IA32_CR_PAT, pat_msr_val);
+
+	__flush_tlb_all();
 }
 
 /**
@@ -296,13 +298,8 @@  void __init pat_bp_init(void)
 	/*
 	 * Xen PV doesn't allow to set PAT MSR, but all cache modes are
 	 * supported.
-	 * When running as TDX guest setting the PAT MSR won't work either
-	 * due to the requirement to set CR0.CD when doing so. Rely on
-	 * firmware to have set the PAT MSR correctly.
 	 */
-	if (pat_disabled ||
-	    cpu_feature_enabled(X86_FEATURE_XENPV) ||
-	    cpu_feature_enabled(X86_FEATURE_TDX_GUEST)) {
+	if (pat_disabled || cpu_feature_enabled(X86_FEATURE_XENPV)) {
 		init_cache_modes(pat_msr_val);
 		return;
 	}