[tip:,irq/urgent] irqchip/sifive-plic: Enable interrupt if needed before EOI

Message ID 170835169709.398.11515115809265577283.tip-bot2@tip-bot2
State New
Headers
Series [tip:,irq/urgent] irqchip/sifive-plic: Enable interrupt if needed before EOI |

Commit Message

tip-bot2 for Thomas Gleixner Feb. 19, 2024, 2:08 p.m. UTC
  The following commit has been merged into the irq/urgent branch of tip:

Commit-ID:     9c92006b896c767218aabe8947b62026a571cfd0
Gitweb:        https://git.kernel.org/tip/9c92006b896c767218aabe8947b62026a571cfd0
Author:        Nam Cao <namcao@linutronix.de>
AuthorDate:    Wed, 31 Jan 2024 09:19:33 +01:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Mon, 19 Feb 2024 15:05:18 +01:00

irqchip/sifive-plic: Enable interrupt if needed before EOI

RISC-V PLIC cannot "end-of-interrupt" (EOI) disabled interrupts, as
explained in the description of Interrupt Completion in the PLIC spec:

"The PLIC signals it has completed executing an interrupt handler by
writing the interrupt ID it received from the claim to the claim/complete
register. The PLIC does not check whether the completion ID is the same
as the last claim ID for that target. If the completion ID does not match
an interrupt source that *is currently enabled* for the target, the
completion is silently ignored."

Commit 69ea463021be ("irqchip/sifive-plic: Fixup EOI failed when masked")
ensured that EOI is successful by enabling interrupt first, before EOI.

Commit a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask
operations") removed the interrupt enabling code from the previous
commit, because it assumes that interrupt should already be enabled at the
point of EOI.

However, this is incorrect: there is a window after a hart claiming an
interrupt and before irq_desc->lock getting acquired, interrupt can be
disabled during this window. Thus, EOI can be invoked while the interrupt
is disabled, effectively nullify this EOI. This results in the interrupt
never gets asserted again, and the device who uses this interrupt appears
frozen.

Make sure that interrupt is really enabled before EOI.

Fixes: a1706a1c5062 ("irqchip/sifive-plic: Separate the enable and mask operations")
Signed-off-by: Nam Cao <namcao@linutronix.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Samuel Holland <samuel@sholland.org>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Guo Ren <guoren@kernel.org>
Cc: linux-riscv@lists.infradead.org
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20240131081933.144512-1-namcao@linutronix.de
---
 drivers/irqchip/irq-sifive-plic.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
  

Patch

diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
index 5b7bc4f..bf0b40b 100644
--- a/drivers/irqchip/irq-sifive-plic.c
+++ b/drivers/irqchip/irq-sifive-plic.c
@@ -148,7 +148,13 @@  static void plic_irq_eoi(struct irq_data *d)
 {
 	struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
 
-	writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+	if (unlikely(irqd_irq_disabled(d))) {
+		plic_toggle(handler, d->hwirq, 1);
+		writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+		plic_toggle(handler, d->hwirq, 0);
+	} else {
+		writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
+	}
 }
 
 #ifdef CONFIG_SMP