diff mbox series

[v2,1/2] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address

Message ID 1707901408-17084-1-git-send-email-michal.vokac@ysoft.com
State New
Headers
Series [v2,1/2] ARM: dts: imx6dl-yapp4: Fix typo in the QCA switch register address |

Commit Message

Michal Vokáč Feb. 14, 2024, 9:03 a.m. UTC 
  This change does not have any functional effect. The switch works just
fine without this patch as it has full access to all the addresses
on the bus. This is simply a clean-up to set the node name address
and reg address to the same value.

Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
---
changes in v2:
- Reword the commit message so it is clear that this patch does not
  fix a functional problem.

 arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Andrew Lunn Feb. 14, 2024, 1:54 p.m. UTC | #1 
On Wed, Feb 14, 2024 at 10:03:27AM +0100, Michal Vokáč wrote:
> This change does not have any functional effect. The switch works just
> fine without this patch as it has full access to all the addresses
> on the bus. This is simply a clean-up to set the node name address
> and reg address to the same value.
> 
> Fixes: 15b43e497ffd ("ARM: dts: imx6dl-yapp4: Use correct pseudo PHY address for the switch")
> Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
index cfb0fc924b42..5763f8253d51 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-yapp4-common.dtsi
@@ -143,7 +143,7 @@ 
 
 		switch@10 {
 			compatible = "qca,qca8334";
-			reg = <10>;
+			reg = <0x10>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 
 			switch_ports: ports {