diff mbox series

[tip:,irq/core] irqchip/renesas-rzg2l: Implement restriction when writing ISCR register

Message ID 170207008170.398.9595361567170757306.tip-bot2@tip-bot2
State New
Headers
Series [tip:,irq/core] irqchip/renesas-rzg2l: Implement restriction when writing ISCR register |

Commit Message

tip-bot2 for Thomas Gleixner Dec. 8, 2023, 9:14 p.m. UTC 
  The following commit has been merged into the irq/core branch of tip:

Commit-ID:     0b57d3bb1cc5da335fd4c7a4b1996e7015f4b5d5
Gitweb:        https://git.kernel.org/tip/0b57d3bb1cc5da335fd4c7a4b1996e7015f4b5d5
Author:        Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
AuthorDate:    Mon, 20 Nov 2023 13:18:16 +02:00
Committer:     Thomas Gleixner <tglx@linutronix.de>
CommitterDate: Fri, 08 Dec 2023 22:06:35 +01:00

irqchip/renesas-rzg2l: Implement restriction when writing ISCR register

The RZ/G2L manual (chapter "IRQ Status Control Register (ISCR)") describes
the operation to clear interrupts through the ISCR register as follows:

[Write operation]

  When "Falling-edge detection", "Rising-edge detection" or
  "Falling/Rising-edge detection" is set in IITSR:

    - In case ISTAT is 1
	0: IRQn interrupt detection status is cleared.
	1: Invalid to write.
    - In case ISTAT is 0
	Invalid to write.

  When "Low-level detection" is set in IITSR.:
        Invalid to write.

Take the interrupt type into account when clearing interrupts through the
ISCR register to avoid writing the ISCR when the interrupt type is level.

Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20231120111820.87398-6-claudiu.beznea.uj@bp.renesas.com

---
 drivers/irqchip/irq-renesas-rzg2l.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/drivers/irqchip/irq-renesas-rzg2l.c b/drivers/irqchip/irq-renesas-rzg2l.c
index 0a77927..d450417 100644
--- a/drivers/irqchip/irq-renesas-rzg2l.c
+++ b/drivers/irqchip/irq-renesas-rzg2l.c
@@ -78,11 +78,17 @@  static void rzg2l_irq_eoi(struct irq_data *d)
 	unsigned int hw_irq = irqd_to_hwirq(d) - IRQC_IRQ_START;
 	struct rzg2l_irqc_priv *priv = irq_data_to_priv(d);
 	u32 bit = BIT(hw_irq);
-	u32 reg;
+	u32 iitsr, iscr;
 
-	reg = readl_relaxed(priv->base + ISCR);
-	if (reg & bit)
-		writel_relaxed(reg & ~bit, priv->base + ISCR);
+	iscr = readl_relaxed(priv->base + ISCR);
+	iitsr = readl_relaxed(priv->base + IITSR);
+
+	/*
+	 * ISCR can only be cleared if the type is falling-edge, rising-edge or
+	 * falling/rising-edge.
+	 */
+	if ((iscr & bit) && (iitsr & IITSR_IITSEL_MASK(hw_irq)))
+		writel_relaxed(iscr & ~bit, priv->base + ISCR);
 }
 
 static void rzg2l_tint_eoi(struct irq_data *d)