[tip:,x86/cache] x86/resctrl: Enable non-contiguous CBMs in Intel CAT
Commit Message
The following commit has been merged into the x86/cache branch of tip:
Commit-ID: 0e3cd31f6e9074886dea5a999bfcc563d144e7de
Gitweb: https://git.kernel.org/tip/0e3cd31f6e9074886dea5a999bfcc563d144e7de
Author: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
AuthorDate: Tue, 10 Oct 2023 12:42:37 +02:00
Committer: Borislav Petkov (AMD) <bp@alien8.de>
CommitterDate: Wed, 11 Oct 2023 21:48:52 +02:00
x86/resctrl: Enable non-contiguous CBMs in Intel CAT
The setting for non-contiguous 1s support in Intel CAT is
hardcoded to false. On these systems, writing non-contiguous
1s into the schemata file will fail before resctrl passes
the value to the hardware.
In Intel CAT CPUID.0x10.1:ECX[3] and CPUID.0x10.2:ECX[3] stopped
being reserved and now carry information about non-contiguous 1s
value support for L3 and L2 cache respectively. The CAT
capacity bitmask (CBM) supports a non-contiguous 1s value if
the bit is set.
The exception are Haswell systems where non-contiguous 1s value
support needs to stay disabled since they can't make use of CPUID
for Cache allocation.
Originally-by: Fenghua Yu <fenghua.yu@intel.com>
Signed-off-by: Maciej Wieczor-Retman <maciej.wieczor-retman@intel.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Peter Newman <peternewman@google.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Reviewed-by: Babu Moger <babu.moger@amd.com>
Tested-by: Peter Newman <peternewman@google.com>
Link: https://lore.kernel.org/r/1849b487256fe4de40b30f88450cba3d9abc9171.1696934091.git.maciej.wieczor-retman@intel.com
---
arch/x86/kernel/cpu/resctrl/core.c | 9 ++++++---
arch/x86/kernel/cpu/resctrl/ctrlmondata.c | 10 ++++++----
arch/x86/kernel/cpu/resctrl/internal.h | 9 +++++++++
3 files changed, 21 insertions(+), 7 deletions(-)
@@ -152,6 +152,7 @@ static inline void cache_alloc_hsw_probe(void)
r->cache.cbm_len = 20;
r->cache.shareable_bits = 0xc0000;
r->cache.min_cbm_bits = 2;
+ r->cache.arch_has_sparse_bitmasks = false;
r->alloc_capable = true;
rdt_alloc_capable = true;
@@ -267,15 +268,18 @@ static void rdt_get_cache_alloc_cfg(int idx, struct rdt_resource *r)
{
struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
union cpuid_0x10_1_eax eax;
+ union cpuid_0x10_x_ecx ecx;
union cpuid_0x10_x_edx edx;
- u32 ebx, ecx;
+ u32 ebx;
- cpuid_count(0x00000010, idx, &eax.full, &ebx, &ecx, &edx.full);
+ cpuid_count(0x00000010, idx, &eax.full, &ebx, &ecx.full, &edx.full);
hw_res->num_closid = edx.split.cos_max + 1;
r->cache.cbm_len = eax.split.cbm_len + 1;
r->default_ctrl = BIT_MASK(eax.split.cbm_len + 1) - 1;
r->cache.shareable_bits = ebx & r->default_ctrl;
r->data_width = (r->cache.cbm_len + 3) / 4;
+ if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL)
+ r->cache.arch_has_sparse_bitmasks = ecx.split.noncont;
r->alloc_capable = true;
}
@@ -872,7 +876,6 @@ static __init void rdt_init_res_defs_intel(void)
if (r->rid == RDT_RESOURCE_L3 ||
r->rid == RDT_RESOURCE_L2) {
- r->cache.arch_has_sparse_bitmasks = false;
r->cache.arch_has_per_cpu_cfg = false;
r->cache.min_cbm_bits = 1;
} else if (r->rid == RDT_RESOURCE_MBA) {
@@ -87,10 +87,12 @@ int parse_bw(struct rdt_parse_data *data, struct resctrl_schema *s,
/*
* Check whether a cache bit mask is valid.
- * For Intel the SDM says:
- * Please note that all (and only) contiguous '1' combinations
- * are allowed (e.g. FFFFH, 0FF0H, 003CH, etc.).
- * Additionally Haswell requires at least two bits set.
+ * On Intel CPUs, non-contiguous 1s value support is indicated by CPUID:
+ * - CPUID.0x10.1:ECX[3]: L3 non-contiguous 1s value supported if 1
+ * - CPUID.0x10.2:ECX[3]: L2 non-contiguous 1s value supported if 1
+ *
+ * Haswell does not support a non-contiguous 1s value and additionally
+ * requires at least two bits set.
* AMD allows non-contiguous bitmasks.
*/
static bool cbm_validate(char *buf, u32 *data, struct rdt_resource *r)
@@ -492,6 +492,15 @@ union cpuid_0x10_3_eax {
unsigned int full;
};
+/* CPUID.(EAX=10H, ECX=ResID).ECX */
+union cpuid_0x10_x_ecx {
+ struct {
+ unsigned int reserved:3;
+ unsigned int noncont:1;
+ } split;
+ unsigned int full;
+};
+
/* CPUID.(EAX=10H, ECX=ResID).EDX */
union cpuid_0x10_x_edx {
struct {