[tip:,x86/shstk] x86: Add PTRACE interface for shadow stack
Commit Message
The following commit has been merged into the x86/shstk branch of tip:
Commit-ID: 2765cdfaf3895bf93dcd1324e6921ba79e27697c
Gitweb: https://git.kernel.org/tip/2765cdfaf3895bf93dcd1324e6921ba79e27697c
Author: Rick Edgecombe <rick.p.edgecombe@intel.com>
AuthorDate: Mon, 12 Jun 2023 17:11:06 -07:00
Committer: Dave Hansen <dave.hansen@linux.intel.com>
CommitterDate: Thu, 15 Jun 2023 16:31:35 -07:00
x86: Add PTRACE interface for shadow stack
Some applications (like GDB) would like to tweak shadow stack state via
ptrace. This allows for existing functionality to continue to work for
seized shadow stack applications. Provide a regset interface for
manipulating the shadow stack pointer (SSP).
There is already ptrace functionality for accessing xstate, but this
does not include supervisor xfeatures. So there is not a completely
clear place for where to put the shadow stack state. Adding it to the
user xfeatures regset would complicate that code, as it currently shares
logic with signals which should not have supervisor features.
Don't add a general supervisor xfeature regset like the user one,
because it is better to maintain flexibility for other supervisor
xfeatures to define their own interface. For example, an xfeature may
decide not to expose all of it's state to userspace, as is actually the
case for shadow stack ptrace functionality. A lot of enum values remain
to be used, so just put it in dedicated shadow stack regset.
The only downside to not having a generic supervisor xfeature regset,
is that apps need to be enlightened of any new supervisor xfeature
exposed this way (i.e. they can't try to have generic save/restore
logic). But maybe that is a good thing, because they have to think
through each new xfeature instead of encountering issues when a new
supervisor xfeature was added.
By adding a shadow stack regset, it also has the effect of including the
shadow stack state in a core dump, which could be useful for debugging.
The shadow stack specific xstate includes the SSP, and the shadow stack
and WRSS enablement status. Enabling shadow stack or WRSS in the kernel
involves more than just flipping the bit. The kernel is made aware that
it has to do extra things when cloning or handling signals. That logic
is triggered off of separate feature enablement state kept in the task
struct. So the flipping on HW shadow stack enforcement without notifying
the kernel to change its behavior would severely limit what an application
could do without crashing, and the results would depend on kernel
internal implementation details. There is also no known use for controlling
this state via ptrace today. So only expose the SSP, which is something
that userspace already has indirect control over.
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Acked-by: Mike Rapoport (IBM) <rppt@kernel.org>
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Tested-by: John Allen <john.allen@amd.com>
Tested-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/all/20230613001108.3040476-41-rick.p.edgecombe%40intel.com
---
arch/x86/include/asm/fpu/regset.h | 7 +--
arch/x86/kernel/fpu/regset.c | 81 ++++++++++++++++++++++++++++++-
arch/x86/kernel/ptrace.c | 12 ++++-
include/uapi/linux/elf.h | 2 +-
4 files changed, 99 insertions(+), 3 deletions(-)
@@ -7,11 +7,12 @@
#include <linux/regset.h>
-extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active;
+extern user_regset_active_fn regset_fpregs_active, regset_xregset_fpregs_active,
+ ssp_active;
extern user_regset_get2_fn fpregs_get, xfpregs_get, fpregs_soft_get,
- xstateregs_get;
+ xstateregs_get, ssp_get;
extern user_regset_set_fn fpregs_set, xfpregs_set, fpregs_soft_set,
- xstateregs_set;
+ xstateregs_set, ssp_set;
/*
* xstateregs_active == regset_fpregs_active. Please refer to the comment
@@ -8,6 +8,7 @@
#include <asm/fpu/api.h>
#include <asm/fpu/signal.h>
#include <asm/fpu/regset.h>
+#include <asm/prctl.h>
#include "context.h"
#include "internal.h"
@@ -174,6 +175,86 @@ out:
return ret;
}
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+int ssp_active(struct task_struct *target, const struct user_regset *regset)
+{
+ if (target->thread.features & ARCH_SHSTK_SHSTK)
+ return regset->n;
+
+ return 0;
+}
+
+int ssp_get(struct task_struct *target, const struct user_regset *regset,
+ struct membuf to)
+{
+ struct fpu *fpu = &target->thread.fpu;
+ struct cet_user_state *cetregs;
+
+ if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK))
+ return -ENODEV;
+
+ sync_fpstate(fpu);
+ cetregs = get_xsave_addr(&fpu->fpstate->regs.xsave, XFEATURE_CET_USER);
+ if (WARN_ON(!cetregs)) {
+ /*
+ * This shouldn't ever be NULL because shadow stack was
+ * verified to be enabled above. This means
+ * MSR_IA32_U_CET.CET_SHSTK_EN should be 1 and so
+ * XFEATURE_CET_USER should not be in the init state.
+ */
+ return -ENODEV;
+ }
+
+ return membuf_write(&to, (unsigned long *)&cetregs->user_ssp,
+ sizeof(cetregs->user_ssp));
+}
+
+int ssp_set(struct task_struct *target, const struct user_regset *regset,
+ unsigned int pos, unsigned int count,
+ const void *kbuf, const void __user *ubuf)
+{
+ struct fpu *fpu = &target->thread.fpu;
+ struct xregs_state *xsave = &fpu->fpstate->regs.xsave;
+ struct cet_user_state *cetregs;
+ unsigned long user_ssp;
+ int r;
+
+ if (!cpu_feature_enabled(X86_FEATURE_USER_SHSTK) ||
+ !ssp_active(target, regset))
+ return -ENODEV;
+
+ if (pos != 0 || count != sizeof(user_ssp))
+ return -EINVAL;
+
+ r = user_regset_copyin(&pos, &count, &kbuf, &ubuf, &user_ssp, 0, -1);
+ if (r)
+ return r;
+
+ /*
+ * Some kernel instructions (IRET, etc) can cause exceptions in the case
+ * of disallowed CET register values. Just prevent invalid values.
+ */
+ if (user_ssp >= TASK_SIZE_MAX || !IS_ALIGNED(user_ssp, 8))
+ return -EINVAL;
+
+ fpu_force_restore(fpu);
+
+ cetregs = get_xsave_addr(xsave, XFEATURE_CET_USER);
+ if (WARN_ON(!cetregs)) {
+ /*
+ * This shouldn't ever be NULL because shadow stack was
+ * verified to be enabled above. This means
+ * MSR_IA32_U_CET.CET_SHSTK_EN should be 1 and so
+ * XFEATURE_CET_USER should not be in the init state.
+ */
+ return -ENODEV;
+ }
+
+ cetregs->user_ssp = user_ssp;
+ return 0;
+}
+#endif /* CONFIG_X86_USER_SHADOW_STACK */
+
#if defined CONFIG_X86_32 || defined CONFIG_IA32_EMULATION
/*
@@ -58,6 +58,7 @@ enum x86_regset_64 {
REGSET64_FP,
REGSET64_IOPERM,
REGSET64_XSTATE,
+ REGSET64_SSP,
};
#define REGSET_GENERAL \
@@ -1267,6 +1268,17 @@ static struct user_regset x86_64_regsets[] __ro_after_init = {
.active = ioperm_active,
.regset_get = ioperm_get
},
+#ifdef CONFIG_X86_USER_SHADOW_STACK
+ [REGSET64_SSP] = {
+ .core_note_type = NT_X86_SHSTK,
+ .n = 1,
+ .size = sizeof(u64),
+ .align = sizeof(u64),
+ .active = ssp_active,
+ .regset_get = ssp_get,
+ .set = ssp_set
+ },
+#endif
};
static const struct user_regset_view user_x86_64_view = {
@@ -406,6 +406,8 @@ typedef struct elf64_shdr {
#define NT_386_TLS 0x200 /* i386 TLS slots (struct user_desc) */
#define NT_386_IOPERM 0x201 /* x86 io permission bitmap (1=deny) */
#define NT_X86_XSTATE 0x202 /* x86 extended state using xsave */
+/* Old binutils treats 0x203 as a CET state */
+#define NT_X86_SHSTK 0x204 /* x86 SHSTK state */
#define NT_S390_HIGH_GPRS 0x300 /* s390 upper register halves */
#define NT_S390_TIMER 0x301 /* s390 timer register */
#define NT_S390_TODCMP 0x302 /* s390 TOD clock comparator register */