[tip:,x86/mtrr] x86/mtrr: Support setting MTRR state for software defined MTRRs
Commit Message
The following commit has been merged into the x86/mtrr branch of tip:
Commit-ID: 29055dc74287467bd7a053d60b4afe753832960d
Gitweb: https://git.kernel.org/tip/29055dc74287467bd7a053d60b4afe753832960d
Author: Juergen Gross <jgross@suse.com>
AuthorDate: Tue, 02 May 2023 14:09:18 +02:00
Committer: Borislav Petkov (AMD) <bp@alien8.de>
CommitterDate: Thu, 01 Jun 2023 15:04:32 +02:00
x86/mtrr: Support setting MTRR state for software defined MTRRs
When running virtualized, MTRR access can be reduced (e.g. in Xen PV
guests or when running as a SEV-SNP guest under Hyper-V). Typically, the
hypervisor will not advertize the MTRR feature in CPUID data, resulting
in no MTRR memory type information being available for the kernel.
This has turned out to result in problems (Link tags below):
- Hyper-V SEV-SNP guests using uncached mappings where they shouldn't
- Xen PV dom0 mapping memory as WB which should be UC- instead
Solve those problems by allowing an MTRR static state override,
overwriting the empty state used today. In case such a state has been
set, don't call get_mtrr_state() in mtrr_bp_init().
The set state will only be used by mtrr_type_lookup(), as in all other
cases mtrr_enabled() is being checked, which will return false. Accept
the overwrite call only for selected cases when running as a guest.
Disable X86_FEATURE_MTRR in order to avoid any MTRR modifications by
just refusing them.
[ bp: Massage. ]
Signed-off-by: Juergen Gross <jgross@suse.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/all/4fe9541e-4d4c-2b2a-f8c8-2d34a7284930@nerdbynature.de/
Link: https://lore.kernel.org/lkml/BYAPR21MB16883ABC186566BD4D2A1451D7FE9@BYAPR21MB1688.namprd21.prod.outlook.com
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
---
arch/x86/include/asm/mtrr.h | 8 ++++-
arch/x86/kernel/cpu/mtrr/generic.c | 60 ++++++++++++++++++++++++++++-
arch/x86/kernel/cpu/mtrr/mtrr.c | 14 ++++++-
arch/x86/kernel/setup.c | 2 +-
4 files changed, 82 insertions(+), 2 deletions(-)
@@ -58,6 +58,8 @@ struct mtrr_state_type {
*/
# ifdef CONFIG_MTRR
void mtrr_bp_init(void);
+void mtrr_overwrite_state(struct mtrr_var_range *var, unsigned int num_var,
+ mtrr_type def_type);
extern u8 mtrr_type_lookup(u64 addr, u64 end, u8 *uniform);
extern void mtrr_save_fixed_ranges(void *);
extern void mtrr_save_state(void);
@@ -75,6 +77,12 @@ void mtrr_disable(void);
void mtrr_enable(void);
void mtrr_generic_set_state(void);
# else
+static inline void mtrr_overwrite_state(struct mtrr_var_range *var,
+ unsigned int num_var,
+ mtrr_type def_type)
+{
+}
+
static inline u8 mtrr_type_lookup(u64 addr, u64 end, u8 *uniform)
{
/*
@@ -8,10 +8,12 @@
#include <linux/init.h>
#include <linux/io.h>
#include <linux/mm.h>
-
+#include <linux/cc_platform.h>
#include <asm/processor-flags.h>
#include <asm/cacheinfo.h>
#include <asm/cpufeature.h>
+#include <asm/hypervisor.h>
+#include <asm/mshyperv.h>
#include <asm/tlbflush.h>
#include <asm/mtrr.h>
#include <asm/msr.h>
@@ -243,6 +245,62 @@ static u8 mtrr_type_lookup_variable(u64 start, u64 end, u64 *partial_end,
}
/**
+ * mtrr_overwrite_state - set static MTRR state
+ *
+ * Used to set MTRR state via different means (e.g. with data obtained from
+ * a hypervisor).
+ * Is allowed only for special cases when running virtualized. Must be called
+ * from the x86_init.hyper.init_platform() hook. It can be called only once.
+ * The MTRR state can't be changed afterwards. To ensure that, X86_FEATURE_MTRR
+ * is cleared.
+ */
+void mtrr_overwrite_state(struct mtrr_var_range *var, unsigned int num_var,
+ mtrr_type def_type)
+{
+ unsigned int i;
+
+ /* Only allowed to be called once before mtrr_bp_init(). */
+ if (WARN_ON_ONCE(mtrr_state_set))
+ return;
+
+ /* Only allowed when running virtualized. */
+ if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+ return;
+
+ /*
+ * Only allowed for special virtualization cases:
+ * - when running as Hyper-V, SEV-SNP guest using vTOM
+ * - when running as Xen PV guest
+ * - when running as SEV-SNP or TDX guest to avoid unnecessary
+ * VMM communication/Virtualization exceptions (#VC, #VE)
+ */
+ if (!cc_platform_has(CC_ATTR_GUEST_SEV_SNP) &&
+ !hv_is_isolation_supported() &&
+ !cpu_feature_enabled(X86_FEATURE_XENPV) &&
+ !cpu_feature_enabled(X86_FEATURE_TDX_GUEST))
+ return;
+
+ /* Disable MTRR in order to disable MTRR modifications. */
+ setup_clear_cpu_cap(X86_FEATURE_MTRR);
+
+ if (var) {
+ if (num_var > MTRR_MAX_VAR_RANGES) {
+ pr_warn("Trying to overwrite MTRR state with %u variable entries\n",
+ num_var);
+ num_var = MTRR_MAX_VAR_RANGES;
+ }
+ for (i = 0; i < num_var; i++)
+ mtrr_state.var_ranges[i] = var[i];
+ num_var_ranges = num_var;
+ }
+
+ mtrr_state.def_type = def_type;
+ mtrr_state.enabled |= MTRR_STATE_MTRR_ENABLED;
+
+ mtrr_state_set = 1;
+}
+
+/**
* mtrr_type_lookup - look up memory type in MTRR
*
* Return Values:
@@ -625,11 +625,23 @@ int __initdata changed_by_mtrr_cleanup;
*/
void __init mtrr_bp_init(void)
{
+ bool generic_mtrrs = cpu_feature_enabled(X86_FEATURE_MTRR);
const char *why = "(not available)";
phys_hi_rsvd = GENMASK(31, boot_cpu_data.x86_phys_bits - 32);
- if (cpu_feature_enabled(X86_FEATURE_MTRR)) {
+ if (!generic_mtrrs && mtrr_state.enabled) {
+ /*
+ * Software overwrite of MTRR state, only for generic case.
+ * Note that X86_FEATURE_MTRR has been reset in this case.
+ */
+ init_table();
+ pr_info("MTRRs set to read-only\n");
+
+ return;
+ }
+
+ if (generic_mtrrs) {
mtrr_if = &generic_mtrr_ops;
} else {
switch (boot_cpu_data.x86_vendor) {
@@ -1037,6 +1037,8 @@ void __init setup_arch(char **cmdline_p)
/*
* VMware detection requires dmi to be available, so this
* needs to be done after dmi_setup(), for the boot CPU.
+ * For some guest types (Xen PV, SEV-SNP, TDX) it is required to be
+ * called before cache_bp_init() for setting up MTRR state.
*/
init_hypervisor_platform();