[v14,10/10] drm/msm/dpu: Tear down DSC datapath on encoder cleanup
Commit Message
Unset DSC_ACTIVE bit at dpu_hw_ctl_reset_intf_cfg_v1(),
dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() functions
to tear down DSC data path if DSC data path was setup previous.
Changes in V10:
-- pass ctl directly instead of dpu_enc to dsc_pipe_cfg()
-- move both dpu_encoder_unprep_dsc() and dpu_encoder_dsc_pipe_clr() to above phys_cleanup()
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
---
drivers/gpu/drm/msm/disp/dpu1/dpu_encoder.c | 39 +++++++++++++++++++++++++++++
drivers/gpu/drm/msm/disp/dpu1/dpu_hw_ctl.c | 7 ++++++
2 files changed, 46 insertions(+)
@@ -2036,6 +2036,41 @@ static void dpu_encoder_helper_reset_mixers(struct dpu_encoder_phys *phys_enc)
}
}
+static void dpu_encoder_dsc_pipe_clr(struct dpu_hw_ctl *ctl,
+ struct dpu_hw_dsc *hw_dsc,
+ struct dpu_hw_pingpong *hw_pp)
+{
+ if (hw_dsc->ops.dsc_disable)
+ hw_dsc->ops.dsc_disable(hw_dsc);
+
+ if (hw_pp->ops.disable_dsc)
+ hw_pp->ops.disable_dsc(hw_pp);
+
+ if (hw_dsc->ops.dsc_bind_pingpong_blk)
+ hw_dsc->ops.dsc_bind_pingpong_blk(hw_dsc, PINGPONG_NONE);
+
+ if (ctl->ops.update_pending_flush_dsc)
+ ctl->ops.update_pending_flush_dsc(ctl, hw_dsc->idx);
+}
+
+static void dpu_encoder_unprep_dsc(struct dpu_encoder_virt *dpu_enc)
+{
+ /* coding only for 2LM, 2enc, 1 dsc config */
+ struct dpu_encoder_phys *enc_master = dpu_enc->cur_master;
+ struct dpu_hw_ctl *ctl = enc_master->hw_ctl;
+ struct dpu_hw_dsc *hw_dsc[MAX_CHANNELS_PER_ENC];
+ struct dpu_hw_pingpong *hw_pp[MAX_CHANNELS_PER_ENC];
+ int i;
+
+ for (i = 0; i < MAX_CHANNELS_PER_ENC; i++) {
+ hw_pp[i] = dpu_enc->hw_pp[i];
+ hw_dsc[i] = dpu_enc->hw_dsc[i];
+
+ if (hw_pp[i] && hw_dsc[i])
+ dpu_encoder_dsc_pipe_clr(ctl, hw_dsc[i], hw_pp[i]);
+ }
+}
+
void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
{
struct dpu_hw_ctl *ctl = phys_enc->hw_ctl;
@@ -2086,8 +2121,12 @@ void dpu_encoder_helper_phys_cleanup(struct dpu_encoder_phys *phys_enc)
phys_enc->hw_pp->merge_3d->idx);
}
+ if (dpu_enc->dsc)
+ dpu_encoder_unprep_dsc(dpu_enc);
+
intf_cfg.stream_sel = 0; /* Don't care value for video mode */
intf_cfg.mode_3d = dpu_encoder_helper_get_3d_blend_mode(phys_enc);
+ intf_cfg.dsc = dpu_encoder_helper_get_dsc(phys_enc);
if (phys_enc->hw_intf)
intf_cfg.intf = phys_enc->hw_intf->idx;
@@ -582,6 +582,7 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
u32 intf_active = 0;
u32 wb_active = 0;
u32 merge3d_active = 0;
+ u32 dsc_active;
/*
* This API resets each portion of the CTL path namely,
@@ -611,6 +612,12 @@ static void dpu_hw_ctl_reset_intf_cfg_v1(struct dpu_hw_ctl *ctx,
wb_active &= ~BIT(cfg->wb - WB_0);
DPU_REG_WRITE(c, CTL_WB_ACTIVE, wb_active);
}
+
+ if (cfg->dsc) {
+ dsc_active = DPU_REG_READ(c, CTL_DSC_ACTIVE);
+ dsc_active &= ~cfg->dsc;
+ DPU_REG_WRITE(c, CTL_DSC_ACTIVE, dsc_active);
+ }
}
static void dpu_hw_ctl_set_fetch_pipe_active(struct dpu_hw_ctl *ctx,