[tip:,smp/core] x86/topology: Remove CPU0 hotplug option

diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt
index 9e5bab2..ccb91a2 100644
--- a/Documentation/admin-guide/kernel-parameters.txt
+++ b/Documentation/admin-guide/kernel-parameters.txt
@@ -818,20 +818,6 @@ 
 			Format:
 			<first_slot>,<last_slot>,<port>,<enum_bit>[,<debug>]
 
-	cpu0_hotplug	[X86] Turn on CPU0 hotplug feature when
-			CONFIG_BOOTPARAM_HOTPLUG_CPU0 is off.
-			Some features depend on CPU0. Known dependencies are:
-			1. Resume from suspend/hibernate depends on CPU0.
-			Suspend/hibernate will fail if CPU0 is offline and you
-			need to online CPU0 before suspend/hibernate.
-			2. PIC interrupts also depend on CPU0. CPU0 can't be
-			removed if a PIC interrupt is detected.
-			It's said poweroff/reboot may depend on CPU0 on some
-			machines although I haven't seen such issues so far
-			after CPU0 is offline on a few tested machines.
-			If the dependencies are under your control, you can
-			turn on cpu0_hotplug.
-
 	cpuidle.off=1	[CPU_IDLE]
 			disable the cpuidle sub-system
 
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst
index f75778d..e6f5bc3 100644
--- a/Documentation/core-api/cpu_hotplug.rst
+++ b/Documentation/core-api/cpu_hotplug.rst
@@ -127,17 +127,8 @@  bring CPU4 back online::
  $ echo 1 > /sys/devices/system/cpu/cpu4/online
  smpboot: Booting Node 0 Processor 4 APIC 0x1
 
-The CPU is usable again. This should work on all CPUs. CPU0 is often special
-and excluded from CPU hotplug. On X86 the kernel option
-*CONFIG_BOOTPARAM_HOTPLUG_CPU0* has to be enabled in order to be able to
-shutdown CPU0. Alternatively the kernel command option *cpu0_hotplug* can be
-used. Some known dependencies of CPU0:
-
-* Resume from hibernate/suspend. Hibernate/suspend will fail if CPU0 is offline.
-* PIC interrupts. CPU0 can't be removed if a PIC interrupt is detected.
-
-Please let Fenghua Yu <fenghua.yu@intel.com> know if you find any dependencies
-on CPU0.
+The CPU is usable again. This should work on all CPUs, but CPU0 is often special
+and excluded from CPU hotplug.
 
 The CPU hotplug coordination
 ============================
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 53bab12..d019133 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -2305,49 +2305,6 @@  config HOTPLUG_CPU
 	def_bool y
 	depends on SMP
 
-config BOOTPARAM_HOTPLUG_CPU0
-	bool "Set default setting of cpu0_hotpluggable"
-	depends on HOTPLUG_CPU
-	help
-	  Set whether default state of cpu0_hotpluggable is on or off.
-
-	  Say Y here to enable CPU0 hotplug by default. If this switch
-	  is turned on, there is no need to give cpu0_hotplug kernel
-	  parameter and the CPU0 hotplug feature is enabled by default.
-
-	  Please note: there are two known CPU0 dependencies if you want
-	  to enable the CPU0 hotplug feature either by this switch or by
-	  cpu0_hotplug kernel parameter.
-
-	  First, resume from hibernate or suspend always starts from CPU0.
-	  So hibernate and suspend are prevented if CPU0 is offline.
-
-	  Second dependency is PIC interrupts always go to CPU0. CPU0 can not
-	  offline if any interrupt can not migrate out of CPU0. There may
-	  be other CPU0 dependencies.
-
-	  Please make sure the dependencies are under your control before
-	  you enable this feature.
-
-	  Say N if you don't want to enable CPU0 hotplug feature by default.
-	  You still can enable the CPU0 hotplug feature at boot by kernel
-	  parameter cpu0_hotplug.
-
-config DEBUG_HOTPLUG_CPU0
-	def_bool n
-	prompt "Debug CPU0 hotplug"
-	depends on HOTPLUG_CPU
-	help
-	  Enabling this option offlines CPU0 (if CPU0 can be offlined) as
-	  soon as possible and boots up userspace with CPU0 offlined. User
-	  can online CPU0 back after boot time.
-
-	  To debug CPU0 hotplug, you need to enable CPU0 offline/online
-	  feature by either turning on CONFIG_BOOTPARAM_HOTPLUG_CPU0 during
-	  compilation or giving cpu0_hotplug kernel parameter at boot.
-
-	  If unsure, say N.
-
 config COMPAT_VDSO
 	def_bool n
 	prompt "Disable the 32-bit vDSO (needed for glibc 2.3.3)"
diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h
index b356464..c854376 100644
--- a/arch/x86/include/asm/cpu.h
+++ b/arch/x86/include/asm/cpu.h
@@ -31,9 +31,6 @@  struct x86_cpu {
 extern int arch_register_cpu(int num);
 extern void arch_unregister_cpu(int);
 extern void soft_restart_cpu(void);
-#ifdef CONFIG_DEBUG_HOTPLUG_CPU0
-extern int _debug_hotplug_cpu(int cpu, int action);
-#endif
 #endif
 
 extern void ap_init_aperfmperf(void);
diff --git a/arch/x86/kernel/topology.c b/arch/x86/kernel/topology.c
index 1b83377..ca004e2 100644
--- a/arch/x86/kernel/topology.c
+++ b/arch/x86/kernel/topology.c
@@ -38,102 +38,12 @@ 
 static DEFINE_PER_CPU(struct x86_cpu, cpu_devices);
 
 #ifdef CONFIG_HOTPLUG_CPU
-
-#ifdef CONFIG_BOOTPARAM_HOTPLUG_CPU0
-static int cpu0_hotpluggable = 1;
-#else
-static int cpu0_hotpluggable;
-static int __init enable_cpu0_hotplug(char *str)
-{
-	cpu0_hotpluggable = 1;
-	return 1;
-}
-
-__setup("cpu0_hotplug", enable_cpu0_hotplug);
-#endif
-
-#ifdef CONFIG_DEBUG_HOTPLUG_CPU0
-/*
- * This function offlines a CPU as early as possible and allows userspace to
- * boot up without the CPU. The CPU can be onlined back by user after boot.
- *
- * This is only called for debugging CPU offline/online feature.
- */
-int _debug_hotplug_cpu(int cpu, int action)
+int arch_register_cpu(int cpu)
 {
-	int ret;
-
-	if (!cpu_is_hotpluggable(cpu))
-		return -EINVAL;
+	struct x86_cpu *xc = per_cpu_ptr(&cpu_devices, cpu);
 
-	switch (action) {
-	case 0:
-		ret = remove_cpu(cpu);
-		if (!ret)
-			pr_info("DEBUG_HOTPLUG_CPU0: CPU %u is now offline\n", cpu);
-		else
-			pr_debug("Can't offline CPU%d.\n", cpu);
-		break;
-	case 1:
-		ret = add_cpu(cpu);
-		if (ret)
-			pr_debug("Can't online CPU%d.\n", cpu);
-
-		break;
-	default:
-		ret = -EINVAL;
-	}
-
-	return ret;
-}
-
-static int __init debug_hotplug_cpu(void)
-{
-	_debug_hotplug_cpu(0, 0);
-	return 0;
-}
-
-late_initcall_sync(debug_hotplug_cpu);
-#endif /* CONFIG_DEBUG_HOTPLUG_CPU0 */
-
-int arch_register_cpu(int num)
-{
-	struct cpuinfo_x86 *c = &cpu_data(num);
-
-	/*
-	 * Currently CPU0 is only hotpluggable on Intel platforms. Other
-	 * vendors can add hotplug support later.
-	 * Xen PV guests don't support CPU0 hotplug at all.
-	 */
-	if (c->x86_vendor != X86_VENDOR_INTEL ||
-	    cpu_feature_enabled(X86_FEATURE_XENPV))
-		cpu0_hotpluggable = 0;
-
-	/*
-	 * Two known BSP/CPU0 dependencies: Resume from suspend/hibernate
-	 * depends on BSP. PIC interrupts depend on BSP.
-	 *
-	 * If the BSP dependencies are under control, one can tell kernel to
-	 * enable BSP hotplug. This basically adds a control file and
-	 * one can attempt to offline BSP.
-	 */
-	if (num == 0 && cpu0_hotpluggable) {
-		unsigned int irq;
-		/*
-		 * We won't take down the boot processor on i386 if some
-		 * interrupts only are able to be serviced by the BSP in PIC.
-		 */
-		for_each_active_irq(irq) {
-			if (!IO_APIC_IRQ(irq) && irq_has_action(irq)) {
-				cpu0_hotpluggable = 0;
-				break;
-			}
-		}
-	}
-	if (num || cpu0_hotpluggable)
-		per_cpu(cpu_devices, num).cpu.hotpluggable = 1;
-
-	return register_cpu(&per_cpu(cpu_devices, num).cpu, num);
+	xc->cpu.hotpluggable = cpu > 0;
+	return register_cpu(&xc->cpu, cpu);
 }
 EXPORT_SYMBOL(arch_register_cpu);
 
diff --git a/arch/x86/power/cpu.c b/arch/x86/power/cpu.c
index 7a4d5e9..63230ff 100644
--- a/arch/x86/power/cpu.c
+++ b/arch/x86/power/cpu.c
@@ -351,43 +351,6 @@  static int bsp_pm_callback(struct notifier_block *nb, unsigned long action,
 	case PM_HIBERNATION_PREPARE:
 		ret = bsp_check();
 		break;
-#ifdef CONFIG_DEBUG_HOTPLUG_CPU0
-	case PM_RESTORE_PREPARE:
-		/*
-		 * When system resumes from hibernation, online CPU0 because
-		 * 1. it's required for resume and
-		 * 2. the CPU was online before hibernation
-		 */
-		if (!cpu_online(0))
-			_debug_hotplug_cpu(0, 1);
-		break;
-	case PM_POST_RESTORE:
-		/*
-		 * When a resume really happens, this code won't be called.
-		 *
-		 * This code is called only when user space hibernation software
-		 * prepares for snapshot device during boot time. So we just
-		 * call _debug_hotplug_cpu() to restore to CPU0's state prior to
-		 * preparing the snapshot device.
-		 *
-		 * This works for normal boot case in our CPU0 hotplug debug
-		 * mode, i.e. CPU0 is offline and user mode hibernation
-		 * software initializes during boot time.
-		 *
-		 * If CPU0 is online and user application accesses snapshot
-		 * device after boot time, this will offline CPU0 and user may
-		 * see different CPU0 state before and after accessing
-		 * the snapshot device. But hopefully this is not a case when
-		 * user debugging CPU0 hotplug. Even if users hit this case,
-		 * they can easily online CPU0 back.
-		 *
-		 * To simplify this debug code, we only consider normal boot
-		 * case. Otherwise we need to remember CPU0's state and restore
-		 * to that state and resolve racy conditions etc.
-		 */
-		_debug_hotplug_cpu(0, 0);
-		break;
-#endif
 	default:
 		break;
 	}