[V3,3/9] dt-bindings: pinctrl: qcom: Add support for ipq5018
Commit Message
Add device tree binding Documentation details for ipq5018
pinctrl driver.
Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
---
[v3] Fixed review comments and DTS schema warnings
.../bindings/pinctrl/qcom,ipq5018-tlmm.yaml | 129 +++++++++++++++++++++
1 file changed, 129 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
Comments
On Fri, 14 Apr 2023 15:59:21 +0530, Sricharan Ramabadhran wrote:
> Add device tree binding Documentation details for ipq5018
> pinctrl driver.
>
> Co-developed-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
> Signed-off-by: Nitheesh Sekar <quic_nsekar@quicinc.com>
> Co-developed-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> Signed-off-by: Varadarajan Narayanan <quic_varada@quicinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@quicinc.com>
> ---
> [v3] Fixed review comments and DTS schema warnings
>
> .../bindings/pinctrl/qcom,ipq5018-tlmm.yaml | 129 +++++++++++++++++++++
> 1 file changed, 129 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.example.dtb: pinctrl@1000000: uart2-state: 'oneOf' conditional failed, one must be fixed:
'bias-pull-down', 'drive-strength', 'function', 'pins' do not match any of the regexes: '-pins$', 'pinctrl-[0-9]+'
'blsp2_uart' is not one of ['atest_char', 'audio_pdm0', 'audio_pdm1', 'audio_rxbclk', 'audio_rxd', 'audio_rxfsync', 'audio_rxmclk', 'audio_txbclk', 'audio_txd', 'audio_txfsync', 'audio_txmclk', 'blsp0_i2c', 'blsp0_spi', 'blsp0_uart0', 'blsp0_uart1', 'blsp1_i2c0', 'blsp1_i2c1', 'blsp1_spi0', 'blsp1_spi1', 'blsp1_uart0', 'blsp1_uart1', 'blsp1_uart2', 'blsp2_i2c0', 'blsp2_i2c1', 'blsp2_spi', 'blsp2_spi0', 'blsp2_spi1', 'btss', 'burn0', 'burn1', 'cri_trng', 'cri_trng0', 'cri_trng1', 'cxc_clk', 'cxc_data', 'dbg_out', 'eud_gpio', 'gcc_plltest', 'gcc_tlmm', 'gpio', 'led0', 'led2', 'mac0', 'mac1', 'mdc', 'mdio', 'pcie0_clk', 'pcie0_wake', 'pcie1_clk', 'pcie1_wake', 'pll_test', 'prng_rosc', 'pwm0', 'pwm1', 'pwm2', 'pwm3', 'qdss_cti_trig_in_a0', 'qdss_cti_trig_in_a1', 'qdss_cti_trig_in_b0', 'qdss_cti_trig_in_b1', 'qdss_cti_trig_out_a0', 'qdss_cti_trig_out_a1', 'qdss_cti_trig_out_b0', 'qdss_cti_trig_out_b1', 'qdss_traceclk_a', 'qdss_traceclk_b', 'qdss_tracectl_a', 'qdss_tracectl_b', 'qdss_trac
edata_a', 'qdss_tracedata_b', 'qspi_clk', 'qspi_cs', 'qspi_data', 'reset_out', 'sdc1_clk', 'sdc1_cmd', 'sdc1_data', 'wci_txd', 'wci_rxd', 'wsa_swrm', 'wsi_clk3', 'wsi_data3', 'wsis_reset', 'xfem']
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-tlmm.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/1681468167-11689-4-git-send-email-quic_srichara@quicinc.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
On 14/04/2023 12:29, Sricharan Ramabadhran wrote:
> Add device tree binding Documentation details for ipq5018
> pinctrl driver.
>
Thank you for your patch. There is something to discuss/improve.
> +
> + interrupt-controller: true
> + "#interrupt-cells": true
> + gpio-controller: true
> + "#gpio-cells": true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> + gpio-reserved-ranges:
> + minItems: 1
> + maxItems: 33
24
(you cannot have more than 24...)
> +
> + gpio-line-names:
> + maxItems: 47
> +
> +patternProperties:
> + "-state$":
> + oneOf:
> + - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
> + - patternProperties:
> + "-pins$":
> + $ref: "#/$defs/qcom-ipq5018-tlmm-state"
> + additionalProperties: false
> +
> +$defs:
> + qcom-ipq5018-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
> + minItems: 1
> + maxItems: 8
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> +
> + enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
> + audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
> + audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
> + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
> + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
> + blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
> + cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
> + gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
> + pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
> + prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
> + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
> + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
> + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
> + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
> + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
> + qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
> + wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
> +
> + bias-pull-down: true
> + bias-pull-up: true
> + bias-disable: true
> + drive-strength: true
> + input-enable: true
> + output-high: true
> + output-low: true
Drop all these 7, especially that input-enable is not allowed explicitly.
> +
> + required:
> + - pins
> +
> + additionalProperties: false
Instead:
unevaluatedProperties: false
and put it after the $ref above. Just like recent changes in the next.
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + tlmm: pinctrl@1000000 {
> + compatible = "qcom,ipq5018-tlmm";
> + reg = <0x01000000 0x300000>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 47>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + uart2-state {
> + pins = "gpio34", "gpio35";
> + function = "blsp2_uart";
Does not look like you tested the bindings. Please run `make
dt_binding_check` (see
Documentation/devicetree/bindings/writing-schema.rst for instructions).
Best regards,
Krzysztof
On 4/16/2023 2:35 PM, Krzysztof Kozlowski wrote:
> On 14/04/2023 12:29, Sricharan Ramabadhran wrote:
>> Add device tree binding Documentation details for ipq5018
>> pinctrl driver.
>>
>
> Thank you for your patch. There is something to discuss/improve.
>
>> +
>> + interrupt-controller: true
>> + "#interrupt-cells": true
>> + gpio-controller: true
>> + "#gpio-cells": true
>> + gpio-ranges: true
>> + wakeup-parent: true
>> +
>> + gpio-reserved-ranges:
>> + minItems: 1
>> + maxItems: 33
>
> 24
> (you cannot have more than 24...)
>
ok, will change this.
>> +
>> + gpio-line-names:
>> + maxItems: 47
>> +
>> +patternProperties:
>> + "-state$":
>> + oneOf:
>> + - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
>> + - patternProperties:
>> + "-pins$":
>> + $ref: "#/$defs/qcom-ipq5018-tlmm-state"
>> + additionalProperties: false
>> +
>> +$defs:
>> + qcom-ipq5018-tlmm-state:
>> + type: object
>> + description:
>> + Pinctrl node's client devices use subnodes for desired pin configuration.
>> + Client device subnodes use below standard properties.
>> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> + properties:
>> + pins:
>> + description:
>> + List of gpio pins affected by the properties specified in this
>> + subnode.
>> + items:
>> + pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
>> + minItems: 1
>> + maxItems: 8
>> +
>> + function:
>> + description:
>> + Specify the alternative function to be configured for the specified
>> + pins.
>> +
>> + enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
>> + audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
>> + audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
>> + blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
>> + blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
>> + blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
>> + cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
>> + gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
>> + pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
>> + prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
>> + qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
>> + qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
>> + qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
>> + qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
>> + qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
>> + qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
>> + wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
>> +
>> + bias-pull-down: true
>> + bias-pull-up: true
>> + bias-disable: true
>> + drive-strength: true
>> + input-enable: true
>> + output-high: true
>> + output-low: true
>
> Drop all these 7, especially that input-enable is not allowed explicitly.
>
ok.
>> +
>> + required:
>> + - pins
>> +
>> + additionalProperties: false
>
> Instead:
> unevaluatedProperties: false
> and put it after the $ref above. Just like recent changes in the next.
>
ok, will check and fix it.
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> + tlmm: pinctrl@1000000 {
>> + compatible = "qcom,ipq5018-tlmm";
>> + reg = <0x01000000 0x300000>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 47>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> +
>> + uart2-state {
>> + pins = "gpio34", "gpio35";
>> + function = "blsp2_uart";
>
> Does not look like you tested the bindings. Please run `make
> dt_binding_check` (see
> Documentation/devicetree/bindings/writing-schema.rst for instructions).
I ran it against the TOT, will run it this time on nxt and post V4.
Regards,
Sricharan
On 17/04/2023 08:13, Sricharan Ramabadhran wrote:
>>> + tlmm: pinctrl@1000000 {
>>> + compatible = "qcom,ipq5018-tlmm";
>>> + reg = <0x01000000 0x300000>;
>>> + gpio-controller;
>>> + #gpio-cells = <2>;
>>> + gpio-ranges = <&tlmm 0 0 47>;
>>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>>> + interrupt-controller;
>>> + #interrupt-cells = <2>;
>>> +
>>> + uart2-state {
>>> + pins = "gpio34", "gpio35";
>>> + function = "blsp2_uart";
>>
>> Does not look like you tested the bindings. Please run `make
>> dt_binding_check` (see
>> Documentation/devicetree/bindings/writing-schema.rst for instructions).
>
> I ran it against the TOT, will run it this time on nxt and post V4.
I don't know what is TOT, but this would fail in every case on every tree.
Best regards,
Krzysztof
new file mode 100644
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,ipq5018-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm IPQ5018 TLMM pin controller
+
+maintainers:
+ - Bjorn Andersson <andersson@kernel.org>
+ - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
+
+description:
+ Top Level Mode Multiplexer pin controller in Qualcomm IPQ5018 SoC.
+
+properties:
+ compatible:
+ const: qcom,ipq5018-tlmm
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 33
+
+ gpio-line-names:
+ maxItems: 47
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-ipq5018-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-ipq5018-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ pattern: "^gpio([0-9]|[1-3][0-9]|4[0-6])$"
+ minItems: 1
+ maxItems: 8
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+
+ enum: [ atest_char, audio_pdm0, audio_pdm1, audio_rxbclk, audio_rxd,
+ audio_rxfsync, audio_rxmclk, audio_txbclk, audio_txd,
+ audio_txfsync, audio_txmclk, blsp0_i2c, blsp0_spi, blsp0_uart0,
+ blsp0_uart1, blsp1_i2c0, blsp1_i2c1, blsp1_spi0, blsp1_spi1,
+ blsp1_uart0, blsp1_uart1, blsp1_uart2, blsp2_i2c0, blsp2_i2c1,
+ blsp2_spi, blsp2_spi0, blsp2_spi1, btss, burn0, burn1, cri_trng,
+ cri_trng0, cri_trng1, cxc_clk, cxc_data, dbg_out, eud_gpio,
+ gcc_plltest, gcc_tlmm, gpio, led0, led2, mac0, mac1, mdc, mdio,
+ pcie0_clk, pcie0_wake, pcie1_clk, pcie1_wake, pll_test,
+ prng_rosc, pwm0, pwm1, pwm2, pwm3, qdss_cti_trig_in_a0,
+ qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
+ qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
+ qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
+ qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
+ qdss_tracedata_a, qdss_tracedata_b, qspi_clk, qspi_cs,
+ qspi_data, reset_out, sdc1_clk, sdc1_cmd, sdc1_data, wci_txd,
+ wci_rxd, wsa_swrm, wsi_clk3, wsi_data3, wsis_reset, xfem ]
+
+ bias-pull-down: true
+ bias-pull-up: true
+ bias-disable: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ tlmm: pinctrl@1000000 {
+ compatible = "qcom,ipq5018-tlmm";
+ reg = <0x01000000 0x300000>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 47>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ uart2-state {
+ pins = "gpio34", "gpio35";
+ function = "blsp2_uart";
+ drive-strength = <8>;
+ bias-pull-down;
+ };
+ };