diff mbox series

[v3,1/2] dt-bindings: regulator: Add Richtek RT5739

Message ID 1678063358-18128-1-git-send-email-cy_huang@richtek.com
State New
Headers
Series [v3,1/2] dt-bindings: regulator: Add Richtek RT5739 |

Commit Message

ChiYuan Huang March 6, 2023, 12:42 a.m. UTC 
  From: ChiYuan Huang <cy_huang@richtek.com>

Add the binding document for Richtek RT5739.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
Since v3:
- Add 'Reviewed-by" tag.

Since v2:
- Refine dt-binding patch subject
- Shorten and refine title and description without too much marketing text.
- Fix the typo from 'connecton' to 'connection' in 'richtek,vsel-active-high'
  property description
- Remove maxItems in property 'regulator-allowed-modes'
- Fix the wrong min/max microvolt in binding example. Must be '300000' and
  '1300000', respectively.
---
 .../bindings/regulator/richtek,rt5739.yaml         | 72 ++++++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml

Comments

Mark Brown March 8, 2023, 1:53 p.m. UTC | #1 
On Mon, 06 Mar 2023 08:42:37 +0800, cy_huang@richtek.com wrote:
> Add the binding document for Richtek RT5739.
> 
> 

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git for-next

Thanks!

[1/2] dt-bindings: regulator: Add Richtek RT5739
      commit: 2e238605a9d631fc8b9b130ba79cd54f2a22df10
[2/2] regulator: Add support for Richtek RT5739 voltage regulator
      commit: 4536f3b93a3373cac21911103cbaa8c4c2932c38

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
new file mode 100644
index 00000000..358297d
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt5739.yaml
@@ -0,0 +1,72 @@ 
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt5739.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT5739 Step-Down Buck Converter
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  The RT5739 is a step-down switching buck converter that can deliver the
+  programmable output voltage from 300mV to 1300mV with wide input voltage
+  supply of 2.5V to 5.5V. It can provide up to 3.5A continuous current
+  capability at over 80% high efficiency.
+
+allOf:
+  - $ref: regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - richtek,rt5739
+
+  reg:
+    maxItems: 1
+
+  enable-gpios:
+    maxItems: 1
+
+  richtek,vsel-active-high:
+    description: |
+      If property is present, use the 'VSEL1' register group for buck control.
+      Else, use the 'VSEL0' register group. This depends on external hardware
+      'VSEL' pin connection.
+    type: boolean
+
+  regulator-allowed-modes:
+    description: |
+      buck allowed operating mode
+        0: Auto PFM/PWM mode
+        1: Forced PWM mode
+    items:
+      enum: [0, 1]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      regulator@50 {
+        compatible = "richtek,rt5739";
+        reg = <0x50>;
+        enable-gpios = <&gpio26 1 GPIO_ACTIVE_HIGH>;
+        richtek,vsel-active-high;
+        regulator-name = "richtek,rt5739-buck";
+        regulator-min-microvolt = <300000>;
+        regulator-max-microvolt = <1300000>;
+        regulator-allowed-modes = <0 1>;
+        regulator-boot-on;
+      };
+    };