diff mbox series

[v3,2/7] arm64: dts: qcom: sc7280: Add sound node

Message ID 1674131227-26456-3-git-send-email-quic_srivasam@quicinc.com
State New
Headers
Series Add SC7280 audioreach device tree nodes |

Commit Message

Srinivasa Rao Mandadapu Jan. 19, 2023, 12:27 p.m. UTC 
  Add sound node for sc7280 based audioreach platforms.

Include audioreach dtsi into crd-rev3 platform specific dts file.
Also remove phandle to sound node, as audio routing is same as
audioreach specific dtsi file.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts         |  25 +----
 .../qcom/sc7280-herobrine-audioreach-wcd9385.dtsi  | 109 +++++++++++++++++++++
 2 files changed, 110 insertions(+), 24 deletions(-)
 create mode 100644 arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi

Comments

Krzysztof Kozlowski Jan. 19, 2023, 1:26 p.m. UTC | #1 
On 19/01/2023 13:27, Srinivasa Rao Mandadapu wrote:
> Add sound node for sc7280 based audioreach platforms.
> 
> Include audioreach dtsi into crd-rev3 platform specific dts file.
> Also remove phandle to sound node, as audio routing is same as
> audioreach specific dtsi file.

Your subject does not match exactly your contents. Subject says you are
adding sound node to all sc7280 boards. Commit does something else...


Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
index b024626..aea8cbd 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd-r3.dts
@@ -8,7 +8,7 @@ 
 /dts-v1/;
 
 #include "sc7280-idp.dtsi"
-#include "sc7280-audio-idp.dtsi"
+#include "sc7280-herobrine-audioreach-wcd9385.dtsi"
 #include "sc7280-idp-ec-h1.dtsi"
 
 / {
@@ -88,29 +88,6 @@  ap_ts_pen_1v8: &i2c13 {
 	pins = "gpio51";
 };
 
-&sound {
-	audio-routing =
-		"IN1_HPHL", "HPHL_OUT",
-		"IN2_HPHR", "HPHR_OUT",
-		"AMIC1", "MIC BIAS1",
-		"AMIC2", "MIC BIAS2",
-		"VA DMIC0", "MIC BIAS1",
-		"VA DMIC1", "MIC BIAS1",
-		"VA DMIC2", "MIC BIAS3",
-		"VA DMIC3", "MIC BIAS3",
-		"TX SWR_ADC0", "ADC1_OUTPUT",
-		"TX SWR_ADC1", "ADC2_OUTPUT",
-		"TX SWR_ADC2", "ADC3_OUTPUT",
-		"TX SWR_DMIC0", "DMIC1_OUTPUT",
-		"TX SWR_DMIC1", "DMIC2_OUTPUT",
-		"TX SWR_DMIC2", "DMIC3_OUTPUT",
-		"TX SWR_DMIC3", "DMIC4_OUTPUT",
-		"TX SWR_DMIC4", "DMIC5_OUTPUT",
-		"TX SWR_DMIC5", "DMIC6_OUTPUT",
-		"TX SWR_DMIC6", "DMIC7_OUTPUT",
-		"TX SWR_DMIC7", "DMIC8_OUTPUT";
-};
-
 &wcd9385 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&wcd_reset_n>, <&us_euro_hs_sel>;
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
new file mode 100644
index 0000000..7b3f7ee
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine-audioreach-wcd9385.dtsi
@@ -0,0 +1,109 @@ 
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * sc7280 device tree source for boards using Max98360 and wcd9385 codec
+ * along with ADSP
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/sound/qcom,q6afe.h>
+
+/{
+	/* BOARD-SPECIFIC TOP LEVEL NODES */
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "SC7280-AUDIOREACH";
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS1",
+			"VA DMIC1", "MIC BIAS1",
+			"VA DMIC2", "MIC BIAS3",
+			"VA DMIC3", "MIC BIAS3",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <0>;
+
+		dai-link@0 {
+			link-name = "WCD9385 Playback";
+			reg = <0>;
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		dai-link@1 {
+			link-name = "WCD9385 Capture";
+			reg = <1>;
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd9385 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		dai-link@2 {
+			link-name = "Amplifier Playback";
+			reg = <2>;
+
+			cpu {
+				sound-dai = <&q6apmbedai SECONDARY_MI2S_RX>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		dai-link@3 {
+			link-name = "DMIC";
+			reg = <3>;
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};