diff mbox series

[v2,4/4] clk: qcom: lpasscc-sc7280: Add resets for audioreach

Message ID 1672407799-13768-5-git-send-email-quic_srivasam@quicinc.com
State New
Headers
Series Add resets for ADSP based audio clock controller driver. |

Commit Message

Srinivasa Rao Mandadapu Dec. 30, 2022, 1:43 p.m. UTC 
  The clock gating control for TX/RX/WSA core bus clocks would be required
to be reset(moved from hardware control) from audio core driver. Thus
add the support for the reset clocks in audioreach based clock driver.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Tested-by: Mohammad Rafi Shaik <quic_mohs@quicinc.com>
---
 drivers/clk/qcom/lpasscc-sc7280.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)
diff mbox series

Patch

diff --git a/drivers/clk/qcom/lpasscc-sc7280.c b/drivers/clk/qcom/lpasscc-sc7280.c
index 87e1c21..a7f4ed4 100644
--- a/drivers/clk/qcom/lpasscc-sc7280.c
+++ b/drivers/clk/qcom/lpasscc-sc7280.c
@@ -12,10 +12,12 @@ 
 #include <linux/regmap.h>
 
 #include <dt-bindings/clock/qcom,lpass-sc7280.h>
+#include <dt-bindings/clock/qcom,lpassaudiocc-sc7280.h>
 
 #include "clk-regmap.h"
 #include "clk-branch.h"
 #include "common.h"
+#include "reset.h"
 
 static struct clk_branch lpass_top_cc_lpi_q6_axim_hs_clk = {
 	.halt_reg = 0x0,
@@ -48,6 +50,18 @@  static const struct qcom_cc_desc lpass_cc_top_sc7280_desc = {
 	.num_clks = ARRAY_SIZE(lpass_cc_top_sc7280_clocks),
 };
 
+static const struct qcom_reset_map lpass_cc_sc7280_resets[] = {
+	[LPASS_AUDIO_SWR_RX_CGCR] =  { 0xa0, 1 },
+	[LPASS_AUDIO_SWR_TX_CGCR] =  { 0xa8, 1 },
+	[LPASS_AUDIO_SWR_WSA_CGCR] = { 0xb0, 1 },
+};
+
+static const struct qcom_cc_desc lpass_audio_cc_reset_sc7280_desc = {
+	.config = &lpass_regmap_config,
+	.resets = lpass_cc_sc7280_resets,
+	.num_resets = ARRAY_SIZE(lpass_cc_sc7280_resets),
+};
+
 static int lpass_cc_sc7280_probe(struct platform_device *pdev)
 {
 	const struct qcom_cc_desc *desc;
@@ -71,6 +85,13 @@  static int lpass_cc_sc7280_probe(struct platform_device *pdev)
 	if (ret)
 		goto destroy_pm_clk;
 
+	lpass_regmap_config.name = "reset_cgcr";
+	desc = &lpass_audio_cc_reset_sc7280_desc;
+
+	ret = qcom_cc_probe_by_index(pdev, 1, desc);
+	if (ret)
+		goto destroy_pm_clk;
+
 	return 0;
 
 destroy_pm_clk: