crypto: iaa - Account for cpu-less numa nodes

Message ID 00e3eea06f5dde61734a53af797b190692060aab.camel@linux.intel.com
State New
Headers
Series crypto: iaa - Account for cpu-less numa nodes |

Commit Message

Tom Zanussi Dec. 26, 2023, 8:53 p.m. UTC
  In some configurations e.g. systems with CXL, a numa node can have 0
cpus and cpumask_nth() will return a cpu value that doesn't exist,
which will result in an attempt to add an entry to the wq table at a
bad index.

To fix this, when iterating the cpus for a node, skip any node that
doesn't have cpus.

Also, as a precaution, add a warning and bail if cpumask_nth() returns
a nonexistent cpu.

Reported-by: Zhang, Rex <rex.zhang@intel.com>
Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
---
 drivers/crypto/intel/iaa/iaa_crypto_main.c | 14 +++++++++++---
 1 file changed, 11 insertions(+), 3 deletions(-)
  

Comments

Randy Dunlap Dec. 26, 2023, 9:09 p.m. UTC | #1
Hi--

On 12/26/23 12:53, Tom Zanussi wrote:
> In some configurations e.g. systems with CXL, a numa node can have 0
> cpus and cpumask_nth() will return a cpu value that doesn't exist,
> which will result in an attempt to add an entry to the wq table at a
> bad index.
> 
> To fix this, when iterating the cpus for a node, skip any node that
> doesn't have cpus.
> 
> Also, as a precaution, add a warning and bail if cpumask_nth() returns
> a nonexistent cpu.
> 
> Reported-by: Zhang, Rex <rex.zhang@intel.com>
> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
> ---
>  drivers/crypto/intel/iaa/iaa_crypto_main.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)
> 
> diff --git a/drivers/crypto/intel/iaa/iaa_crypto_main.c b/drivers/crypto/intel/iaa/iaa_crypto_main.c
> index 5093361b0107..782157a74043 100644
> --- a/drivers/crypto/intel/iaa/iaa_crypto_main.c
> +++ b/drivers/crypto/intel/iaa/iaa_crypto_main.c
> @@ -1017,12 +1017,17 @@ static void rebalance_wq_table(void)
>  		return;
>  	}
>  
> -	for_each_online_node(node) {
> +	for_each_node_with_cpus(node) {
>  		node_cpus = cpumask_of_node(node);
>  
>  		for (cpu = 0; cpu < nr_cpus_per_node; cpu++) {
>  			int node_cpu = cpumask_nth(cpu, node_cpus);
>  
> +			if (WARN_ON(node_cpu >= nr_cpu_ids)) {
> +				pr_debug("node_cpu %d doesn't exist!\n", node_cpu);
> +				return;
> +			}
> +
>  			if ((cpu % cpus_per_iaa) == 0)
>  				iaa++;
>  
> @@ -2095,10 +2100,13 @@ static struct idxd_device_driver iaa_crypto_driver = {
>  static int __init iaa_crypto_init_module(void)
>  {
>  	int ret = 0;
> +	int node;
>  
>  	nr_cpus = num_online_cpus();
> -	nr_nodes = num_online_nodes();
> -	nr_cpus_per_node = nr_cpus / nr_nodes;
> +	for_each_node_with_cpus(node)
> +		nr_nodes++;
> +	if (nr_nodes)
> +		nr_cpus_per_node = nr_cpus / nr_nodes;

If nr_nodes == 0, nr_cpus_per_node is not initialized here.
Is it initialized somewhere else, or just not used if nr_nodes is 0?

>  
>  	if (crypto_has_comp("deflate-generic", 0, 0))
>  		deflate_generic_tfm = crypto_alloc_comp("deflate-generic", 0, 0);
  
Tom Zanussi Dec. 26, 2023, 10:04 p.m. UTC | #2
Hi Randy,

On Tue, 2023-12-26 at 13:09 -0800, Randy Dunlap wrote:
> Hi--
> 
> On 12/26/23 12:53, Tom Zanussi wrote:
> > In some configurations e.g. systems with CXL, a numa node can have
> > 0
> > cpus and cpumask_nth() will return a cpu value that doesn't exist,
> > which will result in an attempt to add an entry to the wq table at
> > a
> > bad index.
> > 
> > To fix this, when iterating the cpus for a node, skip any node that
> > doesn't have cpus.
> > 
> > Also, as a precaution, add a warning and bail if cpumask_nth()
> > returns
> > a nonexistent cpu.
> > 
> > Reported-by: Zhang, Rex <rex.zhang@intel.com>
> > Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
> > ---
> >  drivers/crypto/intel/iaa/iaa_crypto_main.c | 14 +++++++++++---
> >  1 file changed, 11 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/crypto/intel/iaa/iaa_crypto_main.c
> > b/drivers/crypto/intel/iaa/iaa_crypto_main.c
> > index 5093361b0107..782157a74043 100644
> > --- a/drivers/crypto/intel/iaa/iaa_crypto_main.c
> > +++ b/drivers/crypto/intel/iaa/iaa_crypto_main.c
> > @@ -1017,12 +1017,17 @@ static void rebalance_wq_table(void)
> >                 return;
> >         }
> >  
> > -       for_each_online_node(node) {
> > +       for_each_node_with_cpus(node) {
> >                 node_cpus = cpumask_of_node(node);
> >  
> >                 for (cpu = 0; cpu < nr_cpus_per_node; cpu++) {
> >                         int node_cpu = cpumask_nth(cpu, node_cpus);
> >  
> > +                       if (WARN_ON(node_cpu >= nr_cpu_ids)) {
> > +                               pr_debug("node_cpu %d doesn't
> > exist!\n", node_cpu);
> > +                               return;
> > +                       }
> > +
> >                         if ((cpu % cpus_per_iaa) == 0)
> >                                 iaa++;
> >  
> > @@ -2095,10 +2100,13 @@ static struct idxd_device_driver
> > iaa_crypto_driver = {
> >  static int __init iaa_crypto_init_module(void)
> >  {
> >         int ret = 0;
> > +       int node;
> >  
> >         nr_cpus = num_online_cpus();
> > -       nr_nodes = num_online_nodes();
> > -       nr_cpus_per_node = nr_cpus / nr_nodes;
> > +       for_each_node_with_cpus(node)
> > +               nr_nodes++;
> > +       if (nr_nodes)
> > +               nr_cpus_per_node = nr_cpus / nr_nodes;
> 
> If nr_nodes == 0, nr_cpus_per_node is not initialized here.
> Is it initialized somewhere else, or just not used if nr_nodes is 0?
> 

nr_cpus_per_node is initialized to 0 elsewhere (as a static global).

It seems to me nr_nodes should always be at least 1.  From my testing
with !CONFIG_NUMA, nr_nodes is set to 1 in that case; not sure how you
can get actually get nr_nodes == 0 if you have any cpus working.  The
check is there to avoid dividing by 0 but maybe the right thing to is
BUG_ON(!nr_nodes) and return an error, and remove that check...

Thanks,

Tom

> >  
> >         if (crypto_has_comp("deflate-generic", 0, 0))
> >                 deflate_generic_tfm = crypto_alloc_comp("deflate-
> > generic", 0, 0);
>
  
Randy Dunlap Dec. 26, 2023, 11:24 p.m. UTC | #3
On 12/26/23 14:04, Tom Zanussi wrote:
> Hi Randy,
> 
> On Tue, 2023-12-26 at 13:09 -0800, Randy Dunlap wrote:
>> Hi--
>>
>> On 12/26/23 12:53, Tom Zanussi wrote:
>>> In some configurations e.g. systems with CXL, a numa node can have
>>> 0
>>> cpus and cpumask_nth() will return a cpu value that doesn't exist,
>>> which will result in an attempt to add an entry to the wq table at
>>> a
>>> bad index.
>>>
>>> To fix this, when iterating the cpus for a node, skip any node that
>>> doesn't have cpus.
>>>
>>> Also, as a precaution, add a warning and bail if cpumask_nth()
>>> returns
>>> a nonexistent cpu.
>>>
>>> Reported-by: Zhang, Rex <rex.zhang@intel.com>
>>> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
>>> ---
>>>  drivers/crypto/intel/iaa/iaa_crypto_main.c | 14 +++++++++++---
>>>  1 file changed, 11 insertions(+), 3 deletions(-)
>>>
>>> diff --git a/drivers/crypto/intel/iaa/iaa_crypto_main.c
>>> b/drivers/crypto/intel/iaa/iaa_crypto_main.c
>>> index 5093361b0107..782157a74043 100644
>>> --- a/drivers/crypto/intel/iaa/iaa_crypto_main.c
>>> +++ b/drivers/crypto/intel/iaa/iaa_crypto_main.c
>>> @@ -1017,12 +1017,17 @@ static void rebalance_wq_table(void)
>>>                 return;
>>>         }
>>>  
>>> -       for_each_online_node(node) {
>>> +       for_each_node_with_cpus(node) {
>>>                 node_cpus = cpumask_of_node(node);
>>>  
>>>                 for (cpu = 0; cpu < nr_cpus_per_node; cpu++) {
>>>                         int node_cpu = cpumask_nth(cpu, node_cpus);
>>>  
>>> +                       if (WARN_ON(node_cpu >= nr_cpu_ids)) {
>>> +                               pr_debug("node_cpu %d doesn't
>>> exist!\n", node_cpu);
>>> +                               return;
>>> +                       }
>>> +
>>>                         if ((cpu % cpus_per_iaa) == 0)
>>>                                 iaa++;
>>>  
>>> @@ -2095,10 +2100,13 @@ static struct idxd_device_driver
>>> iaa_crypto_driver = {
>>>  static int __init iaa_crypto_init_module(void)
>>>  {
>>>         int ret = 0;
>>> +       int node;
>>>  
>>>         nr_cpus = num_online_cpus();
>>> -       nr_nodes = num_online_nodes();
>>> -       nr_cpus_per_node = nr_cpus / nr_nodes;
>>> +       for_each_node_with_cpus(node)
>>> +               nr_nodes++;
>>> +       if (nr_nodes)
>>> +               nr_cpus_per_node = nr_cpus / nr_nodes;
>>
>> If nr_nodes == 0, nr_cpus_per_node is not initialized here.
>> Is it initialized somewhere else, or just not used if nr_nodes is 0?
>>
> 
> nr_cpus_per_node is initialized to 0 elsewhere (as a static global).
> 
> It seems to me nr_nodes should always be at least 1.  From my testing
> with !CONFIG_NUMA, nr_nodes is set to 1 in that case; not sure how you
> can get actually get nr_nodes == 0 if you have any cpus working.  The
> check is there to avoid dividing by 0 but maybe the right thing to is
> BUG_ON(!nr_nodes) and return an error, and remove that check...

I think it's OK as is then.

and I hope that we never see the WARN_ON() up above. :)

>>>  
>>>         if (crypto_has_comp("deflate-generic", 0, 0))
>>>                 deflate_generic_tfm = crypto_alloc_comp("deflate-
>>> generic", 0, 0);
>>
> 

Thanks.
  
Herbert Xu Dec. 29, 2023, 3:31 a.m. UTC | #4
On Tue, Dec 26, 2023 at 02:53:26PM -0600, Tom Zanussi wrote:
> In some configurations e.g. systems with CXL, a numa node can have 0
> cpus and cpumask_nth() will return a cpu value that doesn't exist,
> which will result in an attempt to add an entry to the wq table at a
> bad index.
> 
> To fix this, when iterating the cpus for a node, skip any node that
> doesn't have cpus.
> 
> Also, as a precaution, add a warning and bail if cpumask_nth() returns
> a nonexistent cpu.
> 
> Reported-by: Zhang, Rex <rex.zhang@intel.com>
> Signed-off-by: Tom Zanussi <tom.zanussi@linux.intel.com>
> ---
>  drivers/crypto/intel/iaa/iaa_crypto_main.c | 14 +++++++++++---
>  1 file changed, 11 insertions(+), 3 deletions(-)

Patch applied.  Thanks.
  

Patch

diff --git a/drivers/crypto/intel/iaa/iaa_crypto_main.c b/drivers/crypto/intel/iaa/iaa_crypto_main.c
index 5093361b0107..782157a74043 100644
--- a/drivers/crypto/intel/iaa/iaa_crypto_main.c
+++ b/drivers/crypto/intel/iaa/iaa_crypto_main.c
@@ -1017,12 +1017,17 @@  static void rebalance_wq_table(void)
 		return;
 	}
 
-	for_each_online_node(node) {
+	for_each_node_with_cpus(node) {
 		node_cpus = cpumask_of_node(node);
 
 		for (cpu = 0; cpu < nr_cpus_per_node; cpu++) {
 			int node_cpu = cpumask_nth(cpu, node_cpus);
 
+			if (WARN_ON(node_cpu >= nr_cpu_ids)) {
+				pr_debug("node_cpu %d doesn't exist!\n", node_cpu);
+				return;
+			}
+
 			if ((cpu % cpus_per_iaa) == 0)
 				iaa++;
 
@@ -2095,10 +2100,13 @@  static struct idxd_device_driver iaa_crypto_driver = {
 static int __init iaa_crypto_init_module(void)
 {
 	int ret = 0;
+	int node;
 
 	nr_cpus = num_online_cpus();
-	nr_nodes = num_online_nodes();
-	nr_cpus_per_node = nr_cpus / nr_nodes;
+	for_each_node_with_cpus(node)
+		nr_nodes++;
+	if (nr_nodes)
+		nr_cpus_per_node = nr_cpus / nr_nodes;
 
 	if (crypto_has_comp("deflate-generic", 0, 0))
 		deflate_generic_tfm = crypto_alloc_comp("deflate-generic", 0, 0);