Show patches with: Submitter = Frank Li       |    State = Action Required       |    Archived = No       |   805 patches
« 1 2 3 4 … 8 9 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[4/4] dmaengine: imx-sdma: Add i2c dma support dmaengine: fsl-sdma: Some improvement for fsl-sdma 1 - - --- 2024-03-04 Frank Li New
[3/4] dmaengine: imx-sdma: Add multi fifo for DEV_TO_DEV dmaengine: fsl-sdma: Some improvement for fsl-sdma - - - --- 2024-03-04 Frank Li New
[2/4] dmaengine: imx-sdma: Support 24bit/3bytes for sg mode dmaengine: fsl-sdma: Some improvement for fsl-sdma 1 - - --- 2024-03-04 Frank Li New
[1/4] dmaengine: imx-sdma: Support allocate memory from internal SRAM (iram) dmaengine: fsl-sdma: Some improvement for fsl-sdma - 1 - --- 2024-03-04 Frank Li New
[v2,4/4] dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart arm64: dts: imx8: add cm40 and cm40_uart - - - --- 2024-03-02 Frank Li New
[v2,3/4] arm64: dts: imx8dxl: update cm40 irq number informaiton arm64: dts: imx8: add cm40 and cm40_uart - - - --- 2024-03-02 Frank Li New
[v2,2/4] arm64: dts: imx8dxl: add lpuart device in cm40 subsystem arm64: dts: imx8: add cm40 and cm40_uart - 2 - --- 2024-03-02 Frank Li New
[v2,1/4] arm64: dts: imx8: add cm40 subsystem dtsi arm64: dts: imx8: add cm40 and cm40_uart - 1 - --- 2024-03-02 Frank Li New
[v2,2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property [v2,1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required - - - --- 2024-03-01 Frank Li New
[v2,1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required [v2,1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required 1 - - --- 2024-03-01 Frank Li New
[v6,3/3] dt-bindings: pci: layerscape-pci-ep: Add snps,dw-pcie-ep.yaml reference dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-03-01 Frank Li New
[v6,2/3] dt-bindings: pci: layerscape-pci: Add snps,dw-pcie.yaml reference dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-03-01 Frank Li New
[v6,1/3] dt-bindings: pci: layerscape-pci: Convert to yaml format dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-03-01 Frank Li New
[v2,5/5] dmaengine: fsl-edma: add i.MX8ULP edma support dmaengine: fsl-edma: add 8ulp support - 1 - --- 2024-02-29 Frank Li New
[v2,4/5] dt-bindings: dma: fsl-edma: add fsl,imx8ulp-edma compatible string dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-29 Frank Li New
[v2,3/5] dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-29 Frank Li New
[v2,2/5] dmaengine: fsl-edma: add safety check for 'srcid' dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-29 Frank Li New
[v2,1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-29 Frank Li New
[v2,1/1] dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support [v2,1/1] dt-bindings: interrupt-controller: fsl,intmux: Include power-domains support 1 - - --- 2024-02-29 Frank Li New
[1/1] PCI: layerscape(ep): Implement common 'dbi' reg-names for dbi_base [1/1] PCI: layerscape(ep): Implement common 'dbi' reg-names for dbi_base - - - --- 2024-02-29 Frank Li New
[1/1] dt-bindings: interrupt-controller: fsl,intmux: add power-domains [1/1] dt-bindings: interrupt-controller: fsl,intmux: add power-domains - - - --- 2024-02-28 Frank Li New
[1/1] dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart [1/1] dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart - - - --- 2024-02-28 Frank Li New
[2/2] dt-bindings: dma: fsl-edma: allow 'power-domains' property [1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required - - - --- 2024-02-28 Frank Li New
[1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required [1/2] dt-bindings: dma: fsl-edma: remove 'clocks' from required 1 - - --- 2024-02-28 Frank Li New
[4/4] dts: arm64: imx8dxl-evk: add lpuart1 and cm40 uart arm64: dts: imx8: add cm40 and cm40_uart - - - --- 2024-02-28 Frank Li New
[3/4] arm64: dts: imx8dxl: update cm40 irq number informaiton arm64: dts: imx8: add cm40 and cm40_uart - - - --- 2024-02-28 Frank Li New
[2/4] arm64: dts: imx8dxl: add lpuart device in cm40 subsystem arm64: dts: imx8: add cm40 and cm40_uart - 1 - --- 2024-02-28 Frank Li New
[1/4] arm64: dts: imx8: add cm40 subsystem dtsi arm64: dts: imx8: add cm40 and cm40_uart - - - --- 2024-02-28 Frank Li New
[v3,4/4] arm64: dts: imx8qxp: add asrc[0,1], esai0, spdif[0,1] and sai[4,5] arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-28 Frank Li New
[v3,3/4] ASoC: dt-bindings: fsl-sai: allow only one dma-names arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-28 Frank Li New
[v3,2/4] ASoC: dt-bindings: fsl,imx-asrc: update max interrupt numbers arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-28 Frank Li New
[v3,1/4] ASoC: dt-bindings: fsl,imx-asrc/spdif: Add power-domains requirement arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-28 Frank Li New
[v5,5/5] dt-bindings: pci: layerscape-pci-ep: Remove 'fsl,pcie-scfg' and 'dma-coherence' from requi… dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-28 Frank Li New
[v5,4/5] dt-bindings: pci: layerscape-pci-ep: Add snps,dw-pcie-ep.yaml reference dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-28 Frank Li New
[v5,3/5] dt-bindings: pci: layerscape-pci: Remove 'fsl,pcie-scfg' and 'dma-coherence' from required dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-28 Frank Li New
[v5,2/5] dt-bindings: pci: layerscape-pci: Add snps,dw-pcie.yaml reference dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-28 Frank Li New
[v5,1/5] dt-bindings: pci: layerscape-pci: Convert to yaml format dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-28 Frank Li New
[6/6] PCI: imx: Config look up table(LUT) to support MSI ITS and IOMMU for i.MX95 PCI: imx6: rename\clean up and add lut information for imx95 - - - --- 2024-02-27 Frank Li New
[5/6] PCI: imx: Simplify switch-case logic by involve core_reset callback PCI: imx6: rename\clean up and add lut information for imx95 - - - --- 2024-02-27 Frank Li New
[4/6] PCI: imx: Simplify switch-case logic by involve set_ref_clk callback PCI: imx6: rename\clean up and add lut information for imx95 - - - --- 2024-02-27 Frank Li New
[3/6] MAINTAINERS: pci: imx: update imx6* to imx* since rename driver file PCI: imx6: rename\clean up and add lut information for imx95 - - - --- 2024-02-27 Frank Li New
[2/6] PCI: imx6: Rename pci-imx6.c and PCI_IMX6 config PCI: imx6: rename\clean up and add lut information for imx95 - - - --- 2024-02-27 Frank Li New
[1/6] PCI: imx6: Rename imx6_* with imx_* PCI: imx6: rename\clean up and add lut information for imx95 - - - --- 2024-02-27 Frank Li New
[v2,4/4] arm64: dts: imx8qxp: add asrc[0,1], esai0, spdif[0,1] and sai[4,5] arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-27 Frank Li New
[v2,3/4] ASoC: dt-bindings: fsl-sai: allow only one dma-names arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-27 Frank Li New
[v2,2/4] ASoC: dt-bindings: fsl,imx-asrc: update max interrupt numbers arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-27 Frank Li New
[v2,1/4] ASoC: dt-bindings: fsl,imx-asrc/spdif: Add power-domains requirement arm64: dts: imx8qxp add asrc and sai - - - --- 2024-02-27 Frank Li New
[v2,3/3] arm64: dts: imx8qm-mek: add flexspi0 support [v2,1/3] arm64: dts: imx8qm-mek: add adc0 support - - - --- 2024-02-27 Frank Li New
[v2,2/3] arm64: dts: imx8qm-mek: add lpspi2 support [v2,1/3] arm64: dts: imx8qm-mek: add adc0 support - - - --- 2024-02-27 Frank Li New
[v2,1/3] arm64: dts: imx8qm-mek: add adc0 support [v2,1/3] arm64: dts: imx8qm-mek: add adc0 support - - - --- 2024-02-27 Frank Li New
[5/5] dmaengine: fsl-edma: add i.MX8ULP edma support dmaengine: fsl-edma: add 8ulp support - 1 - --- 2024-02-27 Frank Li New
[4/5] dt-bindings: fsl-dma: fsl-edma: add fsl,imx8ulp-edma compatible string dmaengine: fsl-edma: add 8ulp support - 1 - --- 2024-02-27 Frank Li New
[3/5] dmaengine: fsl-edma: clean up chclk and FSL_EDMA_DRV_HAS_CHCLK dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-27 Frank Li New
[2/5] dmaengine: fsl-edma: add safety check for 'srcid' dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-27 Frank Li New
[1/5] dmaengine: fsl-edma: remove 'slave_id' from fsl_edma_chan dmaengine: fsl-edma: add 8ulp support - - - --- 2024-02-27 Frank Li New
[3/3] arm64: dts: imx8qm-mek: add flexspi0 support [1/3] arm64: dts: imx8qm-mek: add adc0 support - - - --- 2024-02-26 Frank Li New
[2/3] arm64: dts: imx8qm-mek: add lpspi2 support [1/3] arm64: dts: imx8qm-mek: add adc0 support - - - --- 2024-02-26 Frank Li New
[1/3] arm64: dts: imx8qm-mek: add adc0 support [1/3] arm64: dts: imx8qm-mek: add adc0 support - - - --- 2024-02-26 Frank Li New
[1/1] dt-bindings: pci: layerscape-pci: Convert to yaml format [1/1] dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-26 Frank Li New
[1/1] arm64: dts: imx8qxp: add asrc[0,1], esai0, spdif[0,1] and sai[4,5] [1/1] arm64: dts: imx8qxp: add asrc[0,1], esai0, spdif[0,1] and sai[4,5] - - - --- 2024-02-26 Frank Li New
[1/1] ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node [1/1] ARM: dts: ls1021a: Enable usb3-lpm-capable for usb3 node - - - --- 2024-02-21 Frank Li New
[v11,14/14] PCI: imx6: Add iMX95 Endpoint (EP) support PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,13/14] dt-bindings: imx6q-pcie: Add iMX95 pcie endpoint compatible string PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,12/14] PCI: imx6: Add epc_features in imx6_pcie_drvdata PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,11/14] PCI: imx6: Clean up get addr_space code PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,10/14] PCI: imx6: Add iMX95 PCIe Root Complex support PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,09/14] dt-bindings: imx6q-pcie: Add imx95 pcie compatible string PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,08/14] dt-bindings: imx6q-pcie: Restruct reg and reg-name PCI: imx6: Clean up and add imx95 pci support 2 1 - --- 2024-02-20 Frank Li New
[v11,07/14] dt-bindings: imx6q-pcie: Clean up irrationality clocks check PCI: imx6: Clean up and add imx95 pci support 2 - - --- 2024-02-20 Frank Li New
[v11,06/14] PCI: imx6: Simplify switch-case logic by involve init_phy callback PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,05/14] PCI: imx6: Simplify configure_type() by using mode_off and mode_mask PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,04/14] PCI: imx6: Simplify ltssm_enable() by using ltssm_off and ltssm_mask PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,03/14] PCI: imx6: Simplify reset handling by using by using *_FLAG_HAS_*_RESET PCI: imx6: Clean up and add imx95 pci support - 2 - --- 2024-02-20 Frank Li New
[v11,02/14] PCI: imx6: Simplify phy handling by using IMX6_PCIE_FLAG_HAS_PHYDRV PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v11,01/14] PCI: imx6: Simplify clock handling by using clk_bulk*() function PCI: imx6: Clean up and add imx95 pci support - 1 - --- 2024-02-20 Frank Li New
[v2,1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning [v2,1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning - - - --- 2024-02-19 Frank Li New
[1/1] dmaengine: mxs-dma: switch from dma_coherent to dma_pool [1/1] dmaengine: mxs-dma: switch from dma_coherent to dma_pool - - - --- 2024-02-19 Frank Li New
[v3,1/1] dt-bindings: pci: layerscape-pci: Convert to yaml format [v3,1/1] dt-bindings: pci: layerscape-pci: Convert to yaml format - - - --- 2024-02-14 Frank Li New
[v4,5/5] PCI: dwc: Add common send PME_Turn_Off message method PCI: dwc: Add common pme_turn_off message by using outbound iATU - - - --- 2024-02-13 Frank Li New
[v4,4/5] PCI: Add PCIE_MSG_CODE_PME_TURN_OFF message macro PCI: dwc: Add common pme_turn_off message by using outbound iATU - - - --- 2024-02-13 Frank Li New
[v4,3/5] PCI: dwc: Add outbound MSG TLPs support PCI: dwc: Add common pme_turn_off message by using outbound iATU - 2 - --- 2024-02-13 Frank Li New
[v4,2/5] PCI: dwc: Consolidate args of dw_pcie_prog_outbound_atu() into a structure PCI: dwc: Add common pme_turn_off message by using outbound iATU - 2 - --- 2024-02-13 Frank Li New
[v4,1/5] PCI: Add INTx Mechanism Messages macros PCI: dwc: Add common pme_turn_off message by using outbound iATU 1 2 - --- 2024-02-13 Frank Li New
[v2,2/2] usb: dwc3: apply snps,host-vbus-glitches workaround unconditionally usb: dwc3: drop 'snps,host-vbus-glitches-quirk' 1 - - --- 2024-02-12 Frank Li New
[v2,1/2] dt-bindings: usb: dwc3: drop 'snps,host-vbus-glitches-quirk' usb: dwc3: drop 'snps,host-vbus-glitches-quirk' - - - --- 2024-02-12 Frank Li New
[v2,2/2] dmaengine: fsl-edma: use _Generic to handle difference type [v2,1/2] dmaengine: fsl-edma: add trace event support - - - --- 2024-02-09 Frank Li New
[v2,1/2] dmaengine: fsl-edma: add trace event support [v2,1/2] dmaengine: fsl-edma: add trace event support - - - --- 2024-02-09 Frank Li New
[1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning [1/1] dmaengine: fsl-qdma: add __iomem and struct in union to fix sparse warning - - - --- 2024-02-09 Frank Li New
[2/2] dmaengine: fsl-edma: use _Generic to handle difference type [1/2] dmaengine: fsl-edma: add trace event support - - - --- 2024-02-09 Frank Li New
[1/2] dmaengine: fsl-edma: add trace event support [1/2] dmaengine: fsl-edma: add trace event support - - - --- 2024-02-09 Frank Li New
[v8,8/8] tty: i3c: add TTY over I3C master support I3C target mode support - - - --- 2024-02-08 Frank Li New
[v8,7/8] i3c: add API i3c_dev_gettstatus_format1() to get target device status I3C target mode support - - - --- 2024-02-08 Frank Li New
[v8,6/8] i3c: target: func: add tty driver I3C target mode support - - - --- 2024-02-08 Frank Li New
[v8,5/8] i3c: target: add svc target controller support I3C target mode support - - - --- 2024-02-08 Frank Li New
[v8,4/8] i3c: svc: Add svc-i3c-main.c and svc-i3c.h I3C target mode support - - - --- 2024-02-08 Frank Li New
[v8,3/8] Documentation: i3c: Add I3C target mode controller and function I3C target mode support - - - --- 2024-02-08 Frank Li New
[v8,2/8] dt-bindings: i3c: svc: add proptery mode I3C target mode support - 1 - --- 2024-02-08 Frank Li New
[v8,1/8] i3c: add target mode support I3C target mode support - - - --- 2024-02-08 Frank Li New
[v2,1/1] dt-bindings: pci: layerscape-pci: Convert to yaml file [v2,1/1] dt-bindings: pci: layerscape-pci: Convert to yaml file - - - --- 2024-02-07 Frank Li New
[2/2] usb: dwc3: drop 'quirk' suffix at snps,host-vbus-glitches-quirk usb: dwc3: drop 'quirk' suffix at snps,host-vbus-glitches-quirk - - - --- 2024-02-07 Frank Li New
« 1 2 3 4 … 8 9 »