Show patches with: Submitter = Matthias Schiffer       |    State = Action Required       |   41 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX powerpc: rename SPRN_HID2 define to SPRN_HID2_750FX - - - --- 2024-01-24 Matthias Schiffer New
[v2] powerpc/6xx: set High BAT Enable flag on G2_LE cores [v2] powerpc/6xx: set High BAT Enable flag on G2_LE cores - 1 - --- 2024-01-24 Matthias Schiffer New
powerpc/6xx: set High BAT Enable flag on G2 cores powerpc/6xx: set High BAT Enable flag on G2 cores - - - --- 2023-12-21 Matthias Schiffer New
Reapply "kbuild: Create directory for target DTB" Reapply "kbuild: Create directory for target DTB" - - - --- 2023-12-12 Matthias Schiffer New
Input: synaptics-rmi4 - remove no-op reset handler Input: synaptics-rmi4 - remove no-op reset handler - - - --- 2023-11-21 Matthias Schiffer New
[5.4] Revert "ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver" [5.4] Revert "ARM: dts: Move am33xx and am43xx mmc nodes to sdhci-omap driver" - - - --- 2023-11-06 Matthias Schiffer New
[4/4] arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: update gpio-led configuration [1/4] arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices - - - --- 2023-09-28 Matthias Schiffer New
[3/4] arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add chassis-type [1/4] arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices - - - --- 2023-09-28 Matthias Schiffer New
[2/4] arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add muxing for GPIOs on pin headers [1/4] arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices - - - --- 2023-09-28 Matthias Schiffer New
[1/4] arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices [1/4] arm64: dts: ti: k3-am64-tqma64xxl: add supply regulator for I2C devices - - - --- 2023-09-28 Matthias Schiffer New
[3/3] clk: keystone: syscon-clk: use of_clk_hw_simple_get() for audio refclk clk: keystone: syscon-clk: fixes for audio refclk - - - --- 2023-08-01 Matthias Schiffer New
[2/3] clk: keystone: syscon-clk: specify whether a parent is required in match data clk: keystone: syscon-clk: fixes for audio refclk - - - --- 2023-08-01 Matthias Schiffer New
[1/3] clk: keystone: syscon-clk: use struct instead of array for match data clk: keystone: syscon-clk: fixes for audio refclk - - - --- 2023-08-01 Matthias Schiffer New
[v3,3/3] arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays [v3,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-27 Matthias Schiffer New
[v3,2/3] arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees [v3,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-27 Matthias Schiffer New
[v3,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board [v3,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board 1 - - --- 2023-07-27 Matthias Schiffer New
[v2,3/3] arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays [v2,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-24 Matthias Schiffer New
[v2,2/3] arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees [v2,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-24 Matthias Schiffer New
[v2,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board [v2,1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board 1 - - --- 2023-07-24 Matthias Schiffer New
[3/3] arm64: dts: ti: k3-am64-tqma64xxl-mbax4xxl: add SD-card and WLAN overlays [1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-21 Matthias Schiffer New
[2/3] arm64: dts: ti: Add TQ-Systems TQMa64XxL SoM and MBaX4XxL carrier board Device Trees [1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-21 Matthias Schiffer New
[1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board [1/3] dt-bindings: arm: ti: Add compatible for AM642-based TQMaX4XxL SOM family and carrier board - - - --- 2023-07-21 Matthias Schiffer New
[2/2] spi: add support for generic linux,use-rt-queue flag [1/2] spi: dt-bindings: introduce linux,use-rt-queue flag - - - --- 2023-06-02 Matthias Schiffer New
[1/2] spi: dt-bindings: introduce linux,use-rt-queue flag [1/2] spi: dt-bindings: introduce linux,use-rt-queue flag - - - --- 2023-06-02 Matthias Schiffer New
[v2] i2c: ocores: generate stop condition after timeout in polling mode [v2] i2c: ocores: generate stop condition after timeout in polling mode 1 2 - --- 2023-04-13 Matthias Schiffer New
i2c: ocores: generate stop condition after timeout in polling mode i2c: ocores: generate stop condition after timeout in polling mode - - - --- 2023-02-20 Matthias Schiffer New
[v2,3/3] mfd: tqmx86: correct board names for TQMxE39x [v2,1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base - 1 - --- 2023-02-20 Matthias Schiffer New
[v2,2/3] mfd: tqmx86: specify IO port register range more precisely [v2,1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base - 1 - --- 2023-02-20 Matthias Schiffer New
[v2,1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base [v2,1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base - 1 - --- 2023-02-20 Matthias Schiffer New
[3/3] mfd: tqmx86: correct board names for TQMxE39x [1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base - 1 - --- 2023-02-16 Matthias Schiffer New
[2/3] mfd: tqmx86: specify IO port register range more precisely [1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base - 1 - --- 2023-02-16 Matthias Schiffer New
[1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base [1/3] mfd: tqmx86: do not access I2C_DETECT register through io_base - - - --- 2023-02-16 Matthias Schiffer New
i2c: mxs: ensure that DMA buffers are safe for DMA i2c: mxs: ensure that DMA buffers are safe for DMA - - - --- 2023-02-13 Matthias Schiffer New
mmc: sdhci_am654: Use dev_err_probe() for mmc_of_parse() return code mmc: sdhci_am654: Use dev_err_probe() for mmc_of_parse() return code 1 - - --- 2022-11-01 Matthias Schiffer New
[RFC,5/5] bluetooth: hci_mrvl: allow waiting for firmware load using notify-device "notify-device" for cross-driver readiness notification - - - --- 2022-10-26 Matthias Schiffer New
[RFC,4/5] bluetooth: hci_mrvl: add support for SD8987 "notify-device" for cross-driver readiness notification - - - --- 2022-10-26 Matthias Schiffer New
[RFC,3/5] bluetooth: hci_mrvl: select firmwares to load by match data "notify-device" for cross-driver readiness notification - - - --- 2022-10-26 Matthias Schiffer New
[RFC,2/5] wireless: mwifiex: signal firmware readiness using notify-device "notify-device" for cross-driver readiness notification - - - --- 2022-10-26 Matthias Schiffer New
[RFC,1/5] misc: introduce notify-device driver "notify-device" for cross-driver readiness notification - - - --- 2022-10-26 Matthias Schiffer New
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0 hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0 - - - --- 2022-10-13 Matthias Schiffer New
serial: 8250_omap: remove wait loop from Errata i202 workaround serial: 8250_omap: remove wait loop from Errata i202 workaround - 1 - --- 2022-10-13 Matthias Schiffer New