Show patches with: Submitter = Lino Sanfilippo       |    State = Action Required       |   59 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
[2/2] serial: amba-pl011: Fix DMA transmission in RS485 mode [1/2] serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled - - - --- 2024-02-16 Lino Sanfilippo New
[1/2] serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled [1/2] serial: stm32: do not always set SER_RS485_RX_DURING_TX if RS485 is enabled - - - --- 2024-02-16 Lino Sanfilippo New
tpm,tpm_tis: Avoid warning splat at shutdown tpm,tpm_tis: Avoid warning splat at shutdown - 1 - --- 2024-02-01 Lino Sanfilippo New
[v8,7/7] serial: 8250_exar: Set missing rs485_supported flag Fixes and improvements for RS485 - 1 - --- 2024-01-05 Lino Sanfilippo New
[v8,6/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - 1 - --- 2024-01-05 Lino Sanfilippo New
[v8,5/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - 1 - --- 2024-01-05 Lino Sanfilippo New
[v8,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - 1 - --- 2024-01-05 Lino Sanfilippo New
[v8,3/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - 1 - --- 2024-01-05 Lino Sanfilippo New
[v8,2/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - 1 - --- 2024-01-05 Lino Sanfilippo New
[v8,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - - - --- 2024-01-05 Lino Sanfilippo New
[v7,7/7] serial: 8250_exar: Set missing rs485_supported flag Fixes and improvements for RS485 - 1 - --- 2024-01-03 Lino Sanfilippo New
[v7,6/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - 1 - --- 2024-01-03 Lino Sanfilippo New
[v7,5/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - 1 - --- 2024-01-03 Lino Sanfilippo New
[v7,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - 1 - --- 2024-01-03 Lino Sanfilippo New
[v7,3/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - 1 - --- 2024-01-03 Lino Sanfilippo New
[v7,2/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - 1 - --- 2024-01-03 Lino Sanfilippo New
[v7,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - - - --- 2024-01-03 Lino Sanfilippo New
[v6,7/7] serial: 8250_exar: Set missing rs485_supported flag Fixes and improvements for RS485 - 1 - --- 2023-12-25 Lino Sanfilippo New
[v6,6/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - - - --- 2023-12-25 Lino Sanfilippo New
[v6,5/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - - - --- 2023-12-25 Lino Sanfilippo New
[v6,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - 1 - --- 2023-12-25 Lino Sanfilippo New
[v6,3/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - 1 - --- 2023-12-25 Lino Sanfilippo New
[v6,2/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - 1 - --- 2023-12-25 Lino Sanfilippo New
[v6,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - 2 - --- 2023-12-25 Lino Sanfilippo New
[v5,7/7] serial: 8250_exar: Set missing rs485_supported flag Fixes and improvements for RS485 - 1 - --- 2023-12-09 Lino Sanfilippo New
[v5,6/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - - - --- 2023-12-09 Lino Sanfilippo New
[v5,5/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - - - --- 2023-12-09 Lino Sanfilippo New
[v5,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - 1 - --- 2023-12-09 Lino Sanfilippo New
[v5,3/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - 1 - --- 2023-12-09 Lino Sanfilippo New
[v5,2/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - 1 - --- 2023-12-09 Lino Sanfilippo New
[v5,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - 2 - --- 2023-12-09 Lino Sanfilippo New
[RESEND,v4,7/7] serial: 8250_exar: Set missing rs485_supported flag Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[RESEND,v4,6/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[RESEND,v4,5/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[RESEND,v4,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[RESEND,v4,3/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[RESEND,v4,2/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[RESEND,v4,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 (RESEND) - - - --- 2023-11-19 Lino Sanfilippo New
[v4,7/7] serial: 8250_exar: Set missing rs485_supported flag Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v4,6/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v4,5/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v4,4/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v4,3/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v4,2/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v4,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - - - --- 2023-10-18 Lino Sanfilippo New
[v3,6/6] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v3,5/6] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v3,4/6] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v3,3/6] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v3,2/6] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v3,1/6] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v2,7/7] serial: omap: do not override settings for RS485 support Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v2,6/7] serial: core, imx: do not set RS485 enabled if it is not supported Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v2,5/7] serial: core: make sure RS485 cannot be enabled when it is not supported Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v2,4/7] serial: core: fix sanitizing check for RTS settings Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v2,3/7] serial: core: set missing supported flag for RX during TX GPIO Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v2,2/7] serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode() Fixes and improvements for RS485 - 1 - --- 2023-10-11 Lino Sanfilippo New
[v2,1/7] serial: Do not hold the port lock when setting rx-during-tx GPIO Fixes and improvements for RS485 - - - --- 2023-10-11 Lino Sanfilippo New
[v4,RESEND] tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs [v4,RESEND] tpm,tpm_tis: Disable interrupts after 1000 unhandled IRQs - 1 - --- 2023-07-13 Lino Sanfilippo New