Show patches with: Submitter = Sherry Sun       |   71 patches
Patch Series A/R/T S/W/F Date Submitter Delegate State
tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled tty: serial: fsl_lpuart: avoid idle preamble pending if CTS is enabled - - - --- 2024-03-04 Sherry Sun New
[V2,4/4] arm64: dts: imx8mq-evk: add wake-gpios property for pci bus PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-13 Sherry Sun New
[V2,3/4] arm64: dts: imx8mp-evk: add wake-gpios property for pci bus PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-13 Sherry Sun New
[V2,2/4] dt-bindings: imx6q-pcie: Add wake-gpios property PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-13 Sherry Sun New
[V2,1/4] PCI: imx6: Add pci host wakeup support on imx platforms. PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-13 Sherry Sun New
[4/4] arm64: dts: imx8mq-evk: add host-wake-gpio property for pci bus PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-08 Sherry Sun New
[3/4] arm64: dts: imx8mp-evk: add host-wake-gpio property for pci bus PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-08 Sherry Sun New
[2/4] dt-bindings: imx6q-pcie: Add host-wake-gpio property PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-08 Sherry Sun New
[1/4] PCI: imx6: Add pci host wakeup support on imx platforms. PCI: imx6: Add pci host wakeup support - 1 - --- 2023-12-08 Sherry Sun New
[V2] tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms [V2] tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms - - - --- 2023-08-01 Sherry Sun New
tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms tty: serial: fsl_lpuart: Clear the error flags by writing 1 for lpuart32 platforms - - - --- 2023-07-31 Sherry Sun New
tty: serial: fsl_lpuart: Fix possible integer overflow tty: serial: fsl_lpuart: Fix possible integer overflow - - - --- 2023-07-18 Sherry Sun New
[2/2] tty: serial: fsl_lpuart: add IDLE interrupt support for rx_dma on imx7ulp/imx8ulp/imx8qxp fsl_lpuart: Add IDLE interrupt support for rx_dma on imx7ulp/imx8ulp/imx8qxp - - - --- 2023-07-10 Sherry Sun New
[1/2] tty: serial: fsl_lpuart: move the lpuart32_int() below fsl_lpuart: Add IDLE interrupt support for rx_dma on imx7ulp/imx8ulp/imx8qxp - - - --- 2023-07-10 Sherry Sun New
[V4,3/3] dt-bindings: serial: fsl-lpuart: correct imx93-lpuart dt-binding item correct the lpuart compatible for imx8dxl and imx93 - 1 - --- 2023-07-05 Sherry Sun New
[V4,2/3] arm64: dts: imx93: add "fsl,imx8ulp-lpuart" compatible for imx93 correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-07-05 Sherry Sun New
[V4,1/3] arm64: dts: imx8dxl: remove "fsl,imx7ulp-lpuart" compatible for imx8dxl correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-07-05 Sherry Sun New
[V3,3/3] dt-bindings: serial: fsl-lpuart: correct imx93-lpuart dt-binding item correct the lpuart compatible for imx8dxl and imx93 - 1 - --- 2023-06-27 Sherry Sun New
[V3,2/3] arm64: dts: imx93: add "fsl,imx8ulp-lpuart" compatible for imx93 correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-06-27 Sherry Sun New
[V3,1/3] arm64: dts: imx8dxl: remove "fsl,imx7ulp-lpuart" compatible for imx8dxl correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-06-27 Sherry Sun New
[V2,3/3] dt-bindings: serial: fsl-lpuart: add imx8ulp compatible string correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-06-26 Sherry Sun New
[V2,2/3] arm64: dts: imx93: add "fsl,imx8ulp-lpuart" compatible for imx93 correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-06-26 Sherry Sun New
[V2,1/3] arm64: dts: imx8dxl: remove "fsl,imx7ulp-lpuart" compatible for imx8dxl correct the lpuart compatible for imx8dxl and imx93 - - - --- 2023-06-26 Sherry Sun New
[4/4] dt-bindings: serial: fsl-lpuart: add imx8ulp compatible string correct the lpuart compatible for imx8dxl/imx8ulp/imx93 - - - --- 2023-06-25 Sherry Sun New
[3/4] arm64: dts: imx93: use "fsl,imx8ulp-lpuart" compatible for imx93 correct the lpuart compatible for imx8dxl/imx8ulp/imx93 - - - --- 2023-06-25 Sherry Sun New
[2/4] arm64: dts: imx8ulp: remove "fsl,imx7ulp-lpuart" compatible for i.MX8ULP correct the lpuart compatible for imx8dxl/imx8ulp/imx93 - - - --- 2023-06-25 Sherry Sun New
[1/4] arm64: dts: imx8dxl: remove "fsl,imx7ulp-lpuart" compatible for imx8dxl correct the lpuart compatible for imx8dxl/imx8ulp/imx93 - - - --- 2023-06-25 Sherry Sun New
tty: serial: fsl_lpuart: add earlycon for imx8ulp platform tty: serial: fsl_lpuart: add earlycon for imx8ulp platform - - - --- 2023-06-19 Sherry Sun New
tty: serial: fsl_lpuart: Check the return value of dmaengine_tx_status tty: serial: fsl_lpuart: Check the return value of dmaengine_tx_status - - - --- 2023-05-22 Sherry Sun New
tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK tty: serial: fsl_lpuart: use UARTCTRL_TXINV to send break instead of UARTCTRL_SBK - - - --- 2023-05-19 Sherry Sun New
tty: serial: fsl_lpuart: make sure to turn off break before enabling CTS tty: serial: fsl_lpuart: make sure to turn off break before enabling CTS - - - --- 2023-05-16 Sherry Sun New
[V2] tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform [V2] tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform - 1 - --- 2023-04-14 Sherry Sun New
tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform tty: serial: fsl_lpuart: use UARTMODIR register bits for lpuart32 platform - 1 - --- 2023-04-13 Sherry Sun New
tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active tty: serial: fsl_lpuart: fix crash in lpuart_uport_is_active - - - --- 2023-03-23 Sherry Sun New
tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpua… tty: serial: fsl_lpuart: avoid checking for transfer complete when UARTCTRL_SBK is asserted in lpua… - - - --- 2023-03-23 Sherry Sun New
tty: serdev: serdev-ttyport: add devt for ctrl->dev tty: serdev: serdev-ttyport: add devt for ctrl->dev - - - --- 2023-03-15 Sherry Sun New
tty: serdev: serdev-ttyport: set correct tty->dev for serdev framework tty: serdev: serdev-ttyport: set correct tty->dev for serdev framework - - - --- 2023-03-15 Sherry Sun New
tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted tty: serial: fsl_lpuart: skip waiting for transmission complete when UARTCTRL_SBK is asserted - - - --- 2023-02-23 Sherry Sun New
tty: serial: imx: disable Ageing Timer interrupt request irq tty: serial: imx: disable Ageing Timer interrupt request irq 1 1 - --- 2023-02-06 Sherry Sun New
[6/6] tty: serial: fsl_lpuart: add imx8ulp support tty: serial: fsl_lpuart: improve RXWATER setting and add imx8ulp support - - - --- 2023-01-30 Sherry Sun New
[5/6] tty: serial: fsl_lpuart: set RTS watermark for lpuart tty: serial: fsl_lpuart: improve RXWATER setting and add imx8ulp support - - - --- 2023-01-30 Sherry Sun New
[4/6] tty: serial: fsl_lpuart: Enable Receiver Idle Empty function for LPUART tty: serial: fsl_lpuart: improve RXWATER setting and add imx8ulp support - - - --- 2023-01-30 Sherry Sun New
[3/6] tty: serial: fsl_lpuart: Fix the wrong RXWATER setting for rx dma case tty: serial: fsl_lpuart: improve RXWATER setting and add imx8ulp support - - - --- 2023-01-30 Sherry Sun New
[2/6] tty: serial: fsl_lpuart: set receive watermark for imx8qxp platform tty: serial: fsl_lpuart: improve RXWATER setting and add imx8ulp support - - - --- 2023-01-30 Sherry Sun New
[1/6] tty: serial: fsl_lpuart: make rx_watermark configurable for different platforms tty: serial: fsl_lpuart: improve RXWATER setting and add imx8ulp support - - - --- 2023-01-30 Sherry Sun New
[RESEND] tty: serial: fsl_lpuart: don't enable receiver/transmitter before rx/tx dma ready [RESEND] tty: serial: fsl_lpuart: don't enable receiver/transmitter before rx/tx dma ready - - - --- 2023-01-30 Sherry Sun New
[3/3] tty: serial: imx: disable the break condition when shutdown the uart port tty: serial: fsl_lpuart/imx: improve the TX break settings - - - --- 2022-12-14 Sherry Sun New
[2/3] tty: serial: fsl_lpuart: disable the break condition when shutdown the uart port tty: serial: fsl_lpuart/imx: improve the TX break settings - - - --- 2022-12-14 Sherry Sun New
[1/3] tty: serial: fsl_lpuart: disable the CTS when send break signal tty: serial: fsl_lpuart/imx: improve the TX break settings - - - --- 2022-12-14 Sherry Sun New
tty: serial: fsl_lpuart: don't enable receiver/transmitter before rx/tx dma ready tty: serial: fsl_lpuart: don't enable receiver/transmitter before rx/tx dma ready - - - --- 2022-11-28 Sherry Sun New
[V3,3/3] tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown() fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-25 Sherry Sun New
[V3,2/3] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-25 Sherry Sun New
[V3,1/3] tty: serial: fsl_lpuart: only enable Idle Line Interrupt for non-dma case fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-25 Sherry Sun New
[V2] tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API [V2] tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API - - - --- 2022-11-23 Sherry Sun New
tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API tty: serial: fsl_lpuart: switch to new dmaengine_terminate_* API - - - --- 2022-11-17 Sherry Sun New
[V2,3/3] tty: serial: fsl_lpuart: Use pm_ptr() to avoid need to make pm __maybe_unused fsl_lpuart: add some new features for lpuart driver - - - --- 2022-11-10 Sherry Sun New
[V2,2/3] tty: serial: fsl_lpuart: Add runtime pm support fsl_lpuart: add some new features for lpuart driver - - - --- 2022-11-10 Sherry Sun New
[V2,1/3] tty: serial: fsl_lpuart: enable wakeup source for lpuart fsl_lpuart: add some new features for lpuart driver - - - --- 2022-11-10 Sherry Sun New
[V2,5/5] tty: serial: fsl_lpuart: clear LPUART Status Register in lpuart32_shutdown() fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-10 Sherry Sun New
[V2,4/5] tty: serial: fsl_lpuart: disable Rx/Tx DMA in lpuart32_shutdown() fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-10 Sherry Sun New
[V2,3/5] tty: serial: fsl_lpuart: clear UARTMODIR register in lpuart32_shutdown() fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-10 Sherry Sun New
[V2,2/5] tty: serial: fsl_lpuart: clear UARTCTRL_LOOPS in lpuart32_shutdown() fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-10 Sherry Sun New
[V2,1/5] tty: serial: fsl_lpuart: only enable Idle Line Interrupt for non-dma case fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-10 Sherry Sun New
[2/2] tty: serial: fsl_lpuart: Add runtime pm support fsl_lpuart: add some new features for lpuart driver - - - --- 2022-11-09 Sherry Sun New
[1/2] tty: serial: fsl_lpuart: enable wakeup source for lpuart fsl_lpuart: add some new features for lpuart driver - - - --- 2022-11-09 Sherry Sun New
[2/2] tty: serial: fsl_lpuart: improve lpuart32 registers clearing when shutdown fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-09 Sherry Sun New
[1/2] tty: serial: fsl_lpuart: only enable Idle Line Interrupt for non-dma case fsl_lpuart: improve Idle Line Interrupt and registers handle in .shutdown() - - - --- 2022-11-09 Sherry Sun New
[V4] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset [V4] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset - - - --- 2022-10-24 Sherry Sun New
[V3] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset [V3] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset - - - --- 2022-10-20 Sherry Sun New
[V2] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset [V2] tty: serial: fsl_lpuart: don't break the on-going transfer when global reset - - - --- 2022-10-19 Sherry Sun New
tty: serial: fsl_lpuart: don't break the on-going transfer when global reset tty: serial: fsl_lpuart: don't break the on-going transfer when global reset - - - --- 2022-10-19 Sherry Sun New