Show patches with: Submitter = Théo Lebrun       |   270 patches
« 1 2 3 »
Patch Series A/R/T S/W/F Date Submitter Delegate State
[v9,9/9] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes Add support for Mobileye EyeQ5 system controller 1 - - --- 2024-03-01 Théo Lebrun New
[v9,8/9] MIPS: mobileye: eyeq5: add OLB reset controller node Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun New
[v9,7/9] MIPS: mobileye: eyeq5: use OLB clocks controller node Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun New
[v9,6/9] MIPS: mobileye: eyeq5: add OLB syscon node Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun New
[v9,5/9] MAINTAINERS: Map OLB files to Mobileye SoCs Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun New
[v9,4/9] pinctrl: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-03-01 Théo Lebrun New
[v9,3/9] reset: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun New
[v9,2/9] clk: eyeq5: add platform driver, and init routine at of_clk_init() Add support for Mobileye EyeQ5 system controller - - - --- 2024-03-01 Théo Lebrun New
[v9,1/9] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-03-01 Théo Lebrun New
gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO gpio: nomadik: fix Kconfig dependencies inbetween pinctrl & GPIO - - - --- 2024-03-01 Théo Lebrun New
[v2,11/11] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts 1 - - --- 2024-02-29 Théo Lebrun New
[v2,10/11] MIPS: mobileye: eyeq5: add 5 I2C controller nodes Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts 1 - - --- 2024-02-29 Théo Lebrun New
[v2,09/11] i2c: nomadik: support Mobileye EyeQ5 I2C controller Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-29 Théo Lebrun New
[v2,08/11] i2c: nomadik: fetch i2c-transfer-timeout-us property from devicetree Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 3 - --- 2024-02-29 Théo Lebrun New
[v2,07/11] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 3 - --- 2024-02-29 Théo Lebrun New
[v2,06/11] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 3 - --- 2024-02-29 Théo Lebrun New
[v2,05/11] i2c: nomadik: use bitops helpers Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-29 Théo Lebrun New
[v2,04/11] i2c: nomadik: simplify IRQ masking logic Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-29 Théo Lebrun New
[v2,03/11] i2c: nomadik: rename private struct pointers from dev to priv Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts 1 2 - --- 2024-02-29 Théo Lebrun New
[v2,02/11] dt-bindings: hwmon: lm75: use common hwmon schema Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-29 Théo Lebrun New
[v2,01/11] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - - - --- 2024-02-29 Théo Lebrun New
[v2,30/30] MIPS: mobileye: eyeq5: map GPIOs to pins using gpio-ranges Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 - - --- 2024-02-28 Théo Lebrun New
[v2,29/30] MIPS: mobileye: eyeq5: add resets to GPIO banks Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 - - --- 2024-02-28 Théo Lebrun New
[v2,28/30] MIPS: mobileye: eyeq5: add two GPIO bank nodes Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 - - --- 2024-02-28 Théo Lebrun New
[v2,27/30] MIPS: eyeq5_defconfig: enable GPIO by default Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 - - --- 2024-02-28 Théo Lebrun New
[v2,26/30] Documentation: gpio: mention generic_handle_irq_safe() Rework Nomadik GPIO to add Mobileye EyeQ5 support - 1 - --- 2024-02-28 Théo Lebrun New
[v2,25/30] gpio: nomadik: grab optional reset control and deassert it at probe Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,24/30] gpio: nomadik: support mobileye,eyeq5-gpio Rework Nomadik GPIO to add Mobileye EyeQ5 support - 1 - --- 2024-02-28 Théo Lebrun New
[v2,23/30] gpio: nomadik: handle variadic GPIO count Rework Nomadik GPIO to add Mobileye EyeQ5 support - 1 - --- 2024-02-28 Théo Lebrun New
[v2,22/30] gpio: nomadik: support shared GPIO IRQs Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,21/30] gpio: nomadik: change driver name from gpio to gpio-nomadik Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,20/30] gpio: nomadik: make clock optional Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,19/30] gpio: nomadik: request dynamic ID allocation Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,18/30] gpio: nomadik: use devres version of clk_get*() Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,17/30] gpio: nomadik: use devm_platform_ioremap_resource() helper Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,16/30] gpio: nomadik: replace of_property_read_*() by device_property_read_*() Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,15/30] gpio: nomadik: replace of_find_*() by bus_find_device_by_of_node() Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,14/30] gpio: nomadik: add #include <linux/slab.h> Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,13/30] pinctrl: nomadik: follow conditional kernel coding conventions Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,12/30] pinctrl: nomadik: follow whitespace kernel coding conventions Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,10/30] pinctrl: nomadik: minimise indentation in probe Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,09/30] pinctrl: nomadik: fix build warning (-Wpointer-to-int-cast) Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,08/30] pinctrl: nomadik: fix build warning (-Wformat) Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,07/30] pinctrl: nomadik: Kconfig: allow building with COMPILE_TEST Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,06/30] gpio: nomadik: extract GPIO platform driver from drivers/pinctrl/nomadik/ Rework Nomadik GPIO to add Mobileye EyeQ5 support - - - --- 2024-02-28 Théo Lebrun New
[v2,05/30] gpio: nomadik: fix offset bug in nmk_pmx_set() Rework Nomadik GPIO to add Mobileye EyeQ5 support - 1 - --- 2024-02-28 Théo Lebrun New
[v2,04/30] dt-bindings: gpio: nomadik: add optional reset property Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 1 - --- 2024-02-28 Théo Lebrun New
[v2,03/30] dt-bindings: gpio: nomadik: add mobileye,eyeq5-gpio compatible Rework Nomadik GPIO to add Mobileye EyeQ5 support 1 - - --- 2024-02-28 Théo Lebrun New
[v2,02/30] dt-bindings: gpio: nomadik: add optional ngpios property Rework Nomadik GPIO to add Mobileye EyeQ5 support - 2 - --- 2024-02-28 Théo Lebrun New
[v2,01/30] dt-bindings: gpio: nomadik: convert into yaml format Rework Nomadik GPIO to add Mobileye EyeQ5 support - 2 - --- 2024-02-28 Théo Lebrun New
[v8,10/10] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes Add support for Mobileye EyeQ5 system controller 1 - - --- 2024-02-27 Théo Lebrun New
[v8,09/10] MIPS: mobileye: eyeq5: add OLB reset controller node Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-27 Théo Lebrun New
[v8,08/10] MIPS: mobileye: eyeq5: use OLB clocks controller node Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-27 Théo Lebrun New
[v8,07/10] MIPS: mobileye: eyeq5: add OLB syscon node Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-27 Théo Lebrun New
[v8,06/10] MAINTAINERS: Map OLB files to Mobileye SoCs Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-27 Théo Lebrun New
[v8,05/10] pinctrl: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-02-27 Théo Lebrun New
[v8,04/10] reset: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-27 Théo Lebrun New
[v8,03/10] clk: eyeq5: add platform driver, and init routine at of_clk_init() Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-27 Théo Lebrun New
[v8,02/10] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-02-27 Théo Lebrun New
[v8,01/10] dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings Add support for Mobileye EyeQ5 system controller - 2 - --- 2024-02-27 Théo Lebrun New
[v3,8/8] arm64: dts: ti: k3-j7200: use J7200-specific USB compatible usb: cdns: fix suspend on J7200 by assuming reset-on-resume - - - --- 2024-02-23 Théo Lebrun New
[v3,7/8] usb: cdns3-ti: add J7200 support with reset-on-resume behavior usb: cdns: fix suspend on J7200 by assuming reset-on-resume - - - --- 2024-02-23 Théo Lebrun New
[v3,6/8] usb: cdns3: add quirk to platform data for reset-on-resume usb: cdns: fix suspend on J7200 by assuming reset-on-resume 1 - - --- 2024-02-23 Théo Lebrun New
[v3,5/8] usb: cdns3-ti: pass auxdata from match data to of_platform_populate() usb: cdns: fix suspend on J7200 by assuming reset-on-resume - - - --- 2024-02-23 Théo Lebrun New
[v3,4/8] usb: cdns3-ti: support reset-on-resume behavior usb: cdns: fix suspend on J7200 by assuming reset-on-resume - - - --- 2024-02-23 Théo Lebrun New
[v3,3/8] usb: cdns3-ti: move reg writes from probe into ->runtime_resume() usb: cdns: fix suspend on J7200 by assuming reset-on-resume - - - --- 2024-02-23 Théo Lebrun New
[v3,2/8] dt-bindings: usb: ti,j721e-usb: add ti,j7200-usb compatible usb: cdns: fix suspend on J7200 by assuming reset-on-resume 1 - - --- 2024-02-23 Théo Lebrun New
[v3,1/8] dt-bindings: usb: ti,j721e-usb: drop useless compatible list usb: cdns: fix suspend on J7200 by assuming reset-on-resume - - - --- 2024-02-23 Théo Lebrun New
[v4,4/4] spi: cadence-qspi: add system-wide suspend and resume callbacks spi: cadence-qspi: Fix runtime PM and system-wide suspend - - - --- 2024-02-22 Théo Lebrun New
[v4,3/4] spi: cadence-qspi: put runtime in runtime PM hooks names spi: cadence-qspi: Fix runtime PM and system-wide suspend - 1 - --- 2024-02-22 Théo Lebrun New
[v4,2/4] spi: cadence-qspi: remove system-wide suspend helper calls from runtime PM hooks spi: cadence-qspi: Fix runtime PM and system-wide suspend - - - --- 2024-02-22 Théo Lebrun New
[v4,1/4] spi: cadence-qspi: fix pointer reference in runtime PM hooks spi: cadence-qspi: Fix runtime PM and system-wide suspend - 1 - --- 2024-02-22 Théo Lebrun New
[v7,14/14] MIPS: mobileye: eyeq5: add pinctrl node & pinmux function nodes Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,13/14] MIPS: mobileye: eyeq5: add OLB reset controller node Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,12/14] MIPS: mobileye: eyeq5: use OLB clocks controller node Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,11/14] MIPS: mobileye: eyeq5: add OLB syscon node Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,10/14] MAINTAINERS: Map OLB files to Mobileye SoCs Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,09/14] pinctrl: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-02-21 Théo Lebrun New
[v7,08/14] reset: eyeq5: add platform driver Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,07/14] clk: eyeq5: add platform driver, and init routine at of_clk_init() Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,06/14] dt-bindings: soc: mobileye: add EyeQ5 OLB system controller Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-02-21 Théo Lebrun New
[v7,05/14] dt-bindings: pinctrl: mobileye,eyeq5-pinctrl: add bindings Add support for Mobileye EyeQ5 system controller - 2 - --- 2024-02-21 Théo Lebrun New
[v7,04/14] dt-bindings: reset: mobileye,eyeq5-reset: add bindings Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-02-21 Théo Lebrun New
[v7,03/14] dt-bindings: clock: mobileye,eyeq5-clk: add bindings Add support for Mobileye EyeQ5 system controller - 1 - --- 2024-02-21 Théo Lebrun New
[v7,02/14] clk: fixed-factor: add fwname-based constructor functions Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v7,01/14] clk: fixed-factor: add optional accuracy support Add support for Mobileye EyeQ5 system controller - - - --- 2024-02-21 Théo Lebrun New
[v2] spi: spi-mem: add statistics support to ->exec_op() calls [v2] spi: spi-mem: add statistics support to ->exec_op() calls - 1 - --- 2024-02-16 Théo Lebrun New
[13/13] MIPS: mobileye: eyeq5: add resets to I2C controllers Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - - - --- 2024-02-15 Théo Lebrun New
[12/13] MIPS: mobileye: eyeq5: add evaluation board I2C temp sensor Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - - - --- 2024-02-15 Théo Lebrun New
[11/13] MIPS: mobileye: eyeq5: add 5 I2C controller nodes Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - - - --- 2024-02-15 Théo Lebrun New
[10/13] i2c: nomadik: support Mobileye EyeQ5 I2C controller Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - - - --- 2024-02-15 Théo Lebrun New
[09/13] i2c: nomadik: fetch timeout-usecs property from devicetree Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[08/13] i2c: nomadik: replace jiffies by ktime for FIFO flushing timeout Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[07/13] i2c: nomadik: support short xfer timeouts using waitqueue & hrtimer Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[06/13] i2c: nomadik: use bitops helpers Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[05/13] i2c: nomadik: simplify IRQ masking logic Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[04/13] i2c: nomadik: rename private struct pointers from dev to priv Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[03/13] dt-bindings: hwmon: lm75: add label property Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
[02/13] dt-bindings: i2c: nomadik: add mobileye,eyeq5-i2c bindings and example Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - - - --- 2024-02-15 Théo Lebrun New
[01/13] dt-bindings: i2c: nomadik: add timeout-usecs property bindings Add Mobileye EyeQ5 support to the Nomadik I2C controller & use hrtimers for timeouts - 1 - --- 2024-02-15 Théo Lebrun New
« 1 2 3 »