mbox series

[00/23] arm64: zynqmp: Misc zynqmp changes

Message ID cover.1683034376.git.michal.simek@amd.com
Headers
Series arm64: zynqmp: Misc zynqmp changes |

Message

Michal Simek May 2, 2023, 1:35 p.m. UTC 
  Hi,

the series is syncing the latest dt changes based on board status and the
latest DT schema.
The patches are based on
https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@amd.com/

Thanks,
Michal


Amit Kumar Mahapatra (2):
  arm64: zynqmp: Set qspi tx-buswidth to 4
  arm64: zynqmp: Add mtd partition for secure OS storage area

Ashok Reddy Soma (1):
  arm64: zynqmp: Fix usb node drive strength and slew rate

Michal Simek (15):
  arm64: zynqmp: Describe TI phy as ethernet-phy-id
  arm64: zynqmp: Fix usb reset over bootmode pins on zcu100
  arm64: zynqmp: Sync node name address with reg (mailbox)
  arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOM
  arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOM
  arm64: zynqmp: Used fixed-partitions for QSPI in k26
  arm64: zynqmp: Add gpio labels for modepin gpio
  arm64: zynqmp: Add pinctrl emmc description to SM-K26
  arm64: zynqmp: Switch to ethernet-phy-id in kv260
  arm64: zynqmp: Setup clock for DP and DPDMA
  arm64: zynqmp: Enable DP driver for SOMs
  arm64: zynqmp: Rename ams_ps/pl node names
  arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
  arm64: zynqmp: Describe bus-width for SD card on KV260
  arm64: zynqmp: Add phase tags marking

Piyush Mehta (1):
  arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2

Radhey Shyam Pandey (2):
  arm64: zynqmp: Add L2 cache nodes
  arm64: zynqmp: Add pmu interrupt-affinity

Sai Krishna Potthuri (1):
  arm64: zynqmp: Add resets property to sdhci nodes

Srinivas Neeli (1):
  arm64: zynqmp: Add linux,code for gpio button

 .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  15 +-
 .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso |  20 +-
 .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso |  20 +-
 .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 321 +++++++++++++-----
 .../boot/dts/xilinx/zynqmp-zc1232-revA.dts    |   2 +-
 .../boot/dts/xilinx/zynqmp-zc1254-revA.dts    |   2 +-
 .../boot/dts/xilinx/zynqmp-zc1275-revA.dts    |   2 +-
 .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts    |  10 +-
 .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    |  10 +-
 .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts    |   2 +-
 .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    |  32 +-
 .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  42 ++-
 .../boot/dts/xilinx/zynqmp-zcu102-revB.dts    |  25 +-
 .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  42 ++-
 .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    |  42 ++-
 .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    |  29 +-
 .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    |  29 +-
 arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  33 +-
 18 files changed, 513 insertions(+), 165 deletions(-)

Comments

Michal Simek May 16, 2023, 11:11 a.m. UTC | #1 
On 5/2/23 15:35, Michal Simek wrote:
> Hi,
> 
> the series is syncing the latest dt changes based on board status and the
> latest DT schema.
> The patches are based on
> https://lore.kernel.org/all/20230321070619.29440-1-parth.gajjar@amd.com/
> 
> Thanks,
> Michal
> 
> 
> Amit Kumar Mahapatra (2):
>    arm64: zynqmp: Set qspi tx-buswidth to 4
>    arm64: zynqmp: Add mtd partition for secure OS storage area
> 
> Ashok Reddy Soma (1):
>    arm64: zynqmp: Fix usb node drive strength and slew rate
> 
> Michal Simek (15):
>    arm64: zynqmp: Describe TI phy as ethernet-phy-id
>    arm64: zynqmp: Fix usb reset over bootmode pins on zcu100
>    arm64: zynqmp: Sync node name address with reg (mailbox)
>    arm64: zynqmp: Add dmas, dp, rtc, watchdogs and opp nodes for SOM
>    arm64: zynqmp: Use assigned-clock-rates for setting up SD clock in SOM
>    arm64: zynqmp: Used fixed-partitions for QSPI in k26
>    arm64: zynqmp: Add gpio labels for modepin gpio
>    arm64: zynqmp: Add pinctrl emmc description to SM-K26
>    arm64: zynqmp: Switch to ethernet-phy-id in kv260
>    arm64: zynqmp: Setup clock for DP and DPDMA
>    arm64: zynqmp: Enable DP driver for SOMs
>    arm64: zynqmp: Rename ams_ps/pl node names
>    arm64: zynqmp: Enable AMS on SOM and other zcu10x boards
>    arm64: zynqmp: Describe bus-width for SD card on KV260
>    arm64: zynqmp: Add phase tags marking
> 
> Piyush Mehta (1):
>    arm64: zynqmp: Disable USB3.0 for zc1751-xm016-dc2
> 
> Radhey Shyam Pandey (2):
>    arm64: zynqmp: Add L2 cache nodes
>    arm64: zynqmp: Add pmu interrupt-affinity
> 
> Sai Krishna Potthuri (1):
>    arm64: zynqmp: Add resets property to sdhci nodes
> 
> Srinivas Neeli (1):
>    arm64: zynqmp: Add linux,code for gpio button
> 
>   .../arm64/boot/dts/xilinx/zynqmp-clk-ccf.dtsi |  15 +-
>   .../boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso |  20 +-
>   .../boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso |  20 +-
>   .../boot/dts/xilinx/zynqmp-sm-k26-revA.dts    | 321 +++++++++++++-----
>   .../boot/dts/xilinx/zynqmp-zc1232-revA.dts    |   2 +-
>   .../boot/dts/xilinx/zynqmp-zc1254-revA.dts    |   2 +-
>   .../boot/dts/xilinx/zynqmp-zc1275-revA.dts    |   2 +-
>   .../dts/xilinx/zynqmp-zc1751-xm015-dc1.dts    |  10 +-
>   .../dts/xilinx/zynqmp-zc1751-xm016-dc2.dts    |  10 +-
>   .../dts/xilinx/zynqmp-zc1751-xm018-dc4.dts    |   2 +-
>   .../boot/dts/xilinx/zynqmp-zcu100-revC.dts    |  32 +-
>   .../boot/dts/xilinx/zynqmp-zcu102-revA.dts    |  42 ++-
>   .../boot/dts/xilinx/zynqmp-zcu102-revB.dts    |  25 +-
>   .../boot/dts/xilinx/zynqmp-zcu104-revA.dts    |  42 ++-
>   .../boot/dts/xilinx/zynqmp-zcu104-revC.dts    |  42 ++-
>   .../boot/dts/xilinx/zynqmp-zcu106-revA.dts    |  29 +-
>   .../boot/dts/xilinx/zynqmp-zcu111-revA.dts    |  29 +-
>   arch/arm64/boot/dts/xilinx/zynqmp.dtsi        |  33 +-
>   18 files changed, 513 insertions(+), 165 deletions(-)
> 

I have applied the most of these patches. The rest will be update and sent as v2.

Thanks,
Michal