mbox series

[net-next,v4,0/7] MT7530 DSA Subdriver Improvements Act II

Message ID 20240204-for-netnext-mt7530-improvements-2-v4-0-02bf0abaadb8@arinc9.com
Headers
Series MT7530 DSA Subdriver Improvements Act II |

Message

Arınç ÜNAL via B4 Relay Feb. 4, 2024, 4:34 p.m. UTC 
  Hello!

This is the second patch series with the goal of simplifying the MT7530 DSA
subdriver and improving support for MT7530, MT7531, and the switch on the
MT7988 SoC.

I have done a simple ping test to confirm basic communication on all switch
ports on MCM and standalone MT7530, and MT7531 switch with this patch
series applied.

MT7621 Unielec, MCM MT7530:

rgmii-only-gmac0-mt7621-unielec-u7621-06-16m.dtb
gmac0-and-gmac1-mt7621-unielec-u7621-06-16m.dtb

tftpboot 0x80008000 mips-uzImage.bin; tftpboot 0x83000000 mips-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootm 0x80008000 0x83000000 0x83f00000

MT7622 Bananapi, MT7531:

gmac0-and-gmac1-mt7622-bananapi-bpi-r64.dtb

tftpboot 0x40000000 arm64-Image; tftpboot 0x45000000 arm64-rootfs.cpio.uboot; tftpboot 0x4a000000 $dtb; booti 0x40000000 0x45000000 0x4a000000

MT7623 Bananapi, standalone MT7530:

rgmii-only-gmac0-mt7623n-bananapi-bpi-r2.dtb
gmac0-and-gmac1-mt7623n-bananapi-bpi-r2.dtb

tftpboot 0x80008000 arm-zImage; tftpboot 0x83000000 arm-rootfs.cpio.uboot; tftpboot 0x83f00000 $dtb; bootz 0x80008000 0x83000000 0x83f00000

This patch series is the continuation of the patch series linked below.

https://lore.kernel.org/r/20230522121532.86610-1-arinc.unal@arinc9.com

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
---
Changes in v4:
- Update the patches with the latest received trailers.
- Leave no error returns on mt7530_pad_clk_setup() before renaming it to
  mt7530_setup_port6() and moving it to under mt7530_mac_config().
- Link to v3: https://lore.kernel.org/r/20240202-for-netnext-mt7530-improvements-2-v3-0-63d5adae99ca@arinc9.com

Changes in v3:
- Update the patches with the latest received trailers.
- Patch 5
  - Disable TRGMII clocks for all cases.
- Link to v2: https://lore.kernel.org/r/20240130-for-netnext-mt7530-improvements-2-v2-0-ba06f5dd9eb0@arinc9.com

Changes in v2:
- Update the patches with the latest received trailers.
- Remove 'net: dsa: mt7530: move enabling port 6 to mt7530_setup_port6()'
  which was patch 5. I will bring a more appropriate change with a later
  patch series.
- Patch 5
  - Set P6_INTF_MODE(0) and explain why on the patch log.
- Patch 6
  - Mention the MT7988 document and explain more on the patch log.
- Patch 7
  - Explain more on the patch log.
- Link to v1: https://lore.kernel.org/r/20240113102529.80371-1-arinc.unal@arinc9.com

---
Arınç ÜNAL (7):
      net: dsa: mt7530: empty default case on mt7530_setup_port5()
      net: dsa: mt7530: move XTAL check to mt7530_setup()
      net: dsa: mt7530: simplify mt7530_pad_clk_setup()
      net: dsa: mt7530: call port 6 setup from mt7530_mac_config()
      net: dsa: mt7530: remove pad_setup function pointer
      net: dsa: mt7530: correct port capabilities of MT7988
      net: dsa: mt7530: do not clear config->supported_interfaces

 drivers/net/dsa/mt7530.c | 152 +++++++++++++++++------------------------------
 drivers/net/dsa/mt7530.h |   3 -
 2 files changed, 53 insertions(+), 102 deletions(-)
---
base-commit: 4acf4e62cd572b0c806035046b3698f5585ab821
change-id: 20240121-for-netnext-mt7530-improvements-2-b4f43661b485

Best regards,