mbox series

[v2,0/2] Add JH8100 external interrupt controller support

Message ID 20240130055843.216342-1-changhuang.liang@starfivetech.com
Headers
Series Add JH8100 external interrupt controller support |

Message

Changhuang Liang Jan. 30, 2024, 5:58 a.m. UTC 
  This patchset adds external interrupt controller driver for the StarFive
JH81000 SoC. It can be used to handle high-level input interrupt signals.
It also send the output interrupt signal to RISC-V PLIC.

changes since v1:
- Rebased on tag v6.8-rc1.
- Dropped store reset_contorl.
- Replaced "of_reset_control_get_by_index" with of_reset_control_get_exclusive
- Printed the error code via %pe

v1: https://lore.kernel.org/all/20240111023201.6187-1-changhuang.liang@starfivetech.com/

Changhuang Liang (2):
  dt-bindings: interrupt-controller: Add starfive,jh8100-intc
  irqchip: Add StarFive external interrupt controller

 .../starfive,jh8100-intc.yaml                 |  61 ++++++
 MAINTAINERS                                   |   6 +
 drivers/irqchip/Kconfig                       |  11 ++
 drivers/irqchip/Makefile                      |   1 +
 drivers/irqchip/irq-starfive-jh8100-intc.c    | 180 ++++++++++++++++++
 5 files changed, 259 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/interrupt-controller/starfive,jh8100-intc.yaml
 create mode 100644 drivers/irqchip/irq-starfive-jh8100-intc.c

--
2.25.1