mbox series

[v2,0/4] ARM: dts: qcom: msm8974: Add Samsung Galaxy S5 China support

Message ID 20240127172155.63624-1-i@rong.moe
Headers
Series ARM: dts: qcom: msm8974: Add Samsung Galaxy S5 China support |

Message

Rong Zhang Jan. 27, 2024, 5:21 p.m. UTC 
  Samsung Galaxy S5 has many variants. Currently, the only supported one
is klte. Samsung Galaxy S5 China (kltechn) is the China edition of
klte, and it can mostly work with the klte DTB, with only LEDs and WiFi
missing.

This patchset splits out the common part of klte DTS into klte-common
DTSI, and adds DTS for kltechn by fixing up the GPIO pins for the LEDs
and GPIO expander connected by the WiFi module. A "brcm,board-type"
property is added into the wifi@1 node of the common DTSI to allow all
klte* variants to load the same NVRAM file.

Signed-off-by: Rong Zhang <i@rong.moe>
---
Changes in v2:
- Split out the common part of klte DTS into klte-common DTSI.
- Fix dt-binding to make it consistent with kltechn compatible.
- Link to v1: https://lore.kernel.org/r/20240121154010.168440-1-i@rong.moe/

---
Rong Zhang (4):
  ARM: dts: qcom: msm8974: Split out common part of samsung-klte
  ARM: dts: qcom: msm8974-klte-common: Pin WiFi board type
  dt-bindings: arm: qcom: Add Samsung Galaxy S5 China (kltechn)
  ARM: dts: qcom: msm8974: Add DTS for Samsung Galaxy S5 China (kltechn)

 .../devicetree/bindings/arm/qcom.yaml         |   7 +
 arch/arm/boot/dts/qcom/Makefile               |   1 +
 .../qcom-msm8974pro-samsung-klte-common.dtsi  | 818 ++++++++++++++++++
 .../dts/qcom/qcom-msm8974pro-samsung-klte.dts | 813 +----------------
 .../qcom/qcom-msm8974pro-samsung-kltechn.dts  |  16 +
 5 files changed, 848 insertions(+), 807 deletions(-)
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-klte-common.dtsi
 create mode 100644 arch/arm/boot/dts/qcom/qcom-msm8974pro-samsung-kltechn.dts


base-commit: 3a5879d495b226d0404098e3564462d5f1daa33b