[v8,0/3] Add displays support for bsh-smm-s2/pro boards

Message ID 20231214082457.18737-1-dario.binacchi@amarulasolutions.com
Headers
Series Add displays support for bsh-smm-s2/pro boards |

Message

Dario Binacchi Dec. 14, 2023, 8:24 a.m. UTC
  The series adds drivers for the displays used by bsh-smm-s2/pro boards.
This required applying some patches to the samsung-dsim driver and the
drm_bridge.c module.

Changes in v8:
- Move the 'status' property to the end of the list of nodes:
  - pwm1
  - lcdif
  - mipi_dsi
- Add a newline between properties and child node (mipi_dsi_out).
- Sort the iomuxc node alphabetically
- Rename pwm1grp to blgrp

Changes in v7:
- Drop [3/4] dt-bindings: display: panel: Add synaptics r63353 panel controller
  because applied.

Changes in v6:
- Drop patches:
  - [06/10] drm/panel: Add Synaptics R63353 panel driver
  - [07/10] dt-bindings: display: panel: Add Ilitek ili9805 panel controller
  - [08/10] drm/panel: Add Ilitek ILI9805 panel driver
  - [09/10] drm/panel: ilitek-ili9805: add support for Tianma TM041XDHG01 panel
  Because applied to https://anongit.freedesktop.org/git/drm/drm-misc.git (drm-misc-next)
  Drop patches:
  - [01/10] drm/bridge: Fix bridge disable logic
  - [02/10] drm/bridge: Fix a use case in the bridge disable logic
  Because they are wrong

Changes in v3:
- Replace "synaptics,r63353" compatible with "syna,r63353", as
  required by vendor-prefixes.yaml.
- Squash patch [09/11] dt-bindings: ili9805: add compatible string for Tianma TM041XDHG01
  into [07/11] dt-bindings: display: panel: Add Ilitek ili9805 panel controller.

Changes in v2:
- Adjust the mipi_dsi node based on the latest patches merged into
  the mainline in the dtsi files it includes.
- Added to the series the following patches:
  - 0001 drm/bridge: Fix bridge disable logic
  - 0002 drm/bridge: Fix a use case in the bridge disable logic
  - 0003 samsung-dsim: enter display mode in the enable() callback
  - 0004 drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Dario Binacchi (2):
  drm: bridge: samsung-dsim: enter display mode in the enable() callback
  drm: bridge: samsung-dsim: complete the CLKLANE_STOP setting

Michael Trimarchi (1):
  arm64: dts: imx8mn-bsh-smm-s2/pro: add display setup

 .../freescale/imx8mn-bsh-smm-s2-common.dtsi   |   1 +
 .../freescale/imx8mn-bsh-smm-s2-display.dtsi  | 121 ++++++++++++++++++
 drivers/gpu/drm/bridge/samsung-dsim.c         |  14 +-
 3 files changed, 133 insertions(+), 3 deletions(-)
 create mode 100644 arch/arm64/boot/dts/freescale/imx8mn-bsh-smm-s2-display.dtsi