mbox series

[v2,0/6] Initial device tree support for StarFive JH8100 SoC

Message ID 20231129060043.368874-1-jeeheng.sia@starfivetech.com
Headers
Series Initial device tree support for StarFive JH8100 SoC |

Message

JeeHeng Sia Nov. 29, 2023, 6 a.m. UTC 
  StarFive JH8100 SoC consists of 4 RISC-V performance Cores (Dubhe-90) and
2 RISC-V energy efficient cores (Dubhe-80). It also features various
interfaces such as DDR4, Gbit-Ether, CAN, USB 3.2, SD/MMC, etc., making it
ideal for high-performance computing scenarios.

This patch series introduces initial SoC DTSI support for the StarFive
JH8100 SoC. The relevant dt-binding documentation has been updated
accordingly. Below is the list of IP blocks added in the initial SoC DTSI,
which can be used for booting via initramfs on FPGA:

- StarFive Dubhe-80 CPU
- StarFive Dubhe-90 CPU
- PLIC
- CLINT
- UART

The primary goal is to include foundational patches so that additional
drivers can be built on top of this framework.

Changes since v1:
- Dropped patch 5.
- Moved timebase-frequency from .dts to .dtsi.
- Moved soc node from .dts to .dtsi.
- Revised the title for the dt-binding document by removing Xilinx
  wording.
- Added a full stop to the end of the commit messages.
- Removed extra blank lines.
- Used hyphen for a node name.
- Added more recipients to the mailing list.

Sia Jee Heng (6):
  dt-bindings: riscv: Add StarFive Dubhe compatibles
  dt-bindings: riscv: Add StarFive JH8100 SoC
  dt-bindings: timer: Add StarFive JH8100 clint
  dt-bindings: interrupt-controller: Add StarFive JH8100 plic
  dt-bindings: serial: cdns: Add new compatible string for StarFive
    JH8100 UART
  riscv: dts: starfive: Add initial StarFive JH8100 device tree

 .../sifive,plic-1.0.0.yaml                    |   1 +
 .../devicetree/bindings/riscv/cpus.yaml       |   2 +
 .../devicetree/bindings/riscv/starfive.yaml   |   5 +-
 .../devicetree/bindings/serial/cdns,uart.yaml |   4 +
 .../bindings/timer/sifive,clint.yaml          |   1 +
 arch/riscv/boot/dts/starfive/Makefile         |   1 +
 arch/riscv/boot/dts/starfive/jh8100-evb.dts   |  28 ++
 arch/riscv/boot/dts/starfive/jh8100.dtsi      | 378 ++++++++++++++++++
 8 files changed, 419 insertions(+), 1 deletion(-)
 create mode 100644 arch/riscv/boot/dts/starfive/jh8100-evb.dts
 create mode 100644 arch/riscv/boot/dts/starfive/jh8100.dtsi


base-commit: 18d46e76d7c2eedd8577fae67e3f1d4db25018b0

Comments

JeeHeng Sia Dec. 1, 2023, 7:02 a.m. UTC | #1 
Thank you, Krzysztof, Conor, and LeyFoon, for your comments.
I will prepare version 3 to address all the feedback.

> -----Original Message-----
> From: JeeHeng Sia <jeeheng.sia@starfivetech.com>
> Sent: Wednesday, November 29, 2023 2:01 PM
> To: kernel@esmil.dk; robh+dt@kernel.org; krzysztof.kozlowski+dt@linaro.org; krzk@kernel.org; conor+dt@kernel.org;
> paul.walmsley@sifive.com; palmer@dabbelt.com; aou@eecs.berkeley.edu; daniel.lezcano@linaro.org; tglx@linutronix.de;
> conor@kernel.org; anup@brainfault.org; gregkh@linuxfoundation.org; jirislaby@kernel.org; michal.simek@amd.com; Michael Zhu
> <michael.zhu@starfivetech.com>; drew@beagleboard.org
> Cc: devicetree@vger.kernel.org; linux-riscv@lists.infradead.org; linux-kernel@vger.kernel.org; JeeHeng Sia
> <jeeheng.sia@starfivetech.com>; Leyfoon Tan <leyfoon.tan@starfivetech.com>
> Subject: [PATCH v2 0/6] Initial device tree support for StarFive JH8100 SoC
> 
> StarFive JH8100 SoC consists of 4 RISC-V performance Cores (Dubhe-90) and
> 2 RISC-V energy efficient cores (Dubhe-80). It also features various
> interfaces such as DDR4, Gbit-Ether, CAN, USB 3.2, SD/MMC, etc., making it
> ideal for high-performance computing scenarios.
> 
> This patch series introduces initial SoC DTSI support for the StarFive
> JH8100 SoC. The relevant dt-binding documentation has been updated
> accordingly. Below is the list of IP blocks added in the initial SoC DTSI,
> which can be used for booting via initramfs on FPGA:
> 
> - StarFive Dubhe-80 CPU
> - StarFive Dubhe-90 CPU
> - PLIC
> - CLINT
> - UART
> 
> The primary goal is to include foundational patches so that additional
> drivers can be built on top of this framework.
> 
> Changes since v1:
> - Dropped patch 5.
> - Moved timebase-frequency from .dts to .dtsi.
> - Moved soc node from .dts to .dtsi.
> - Revised the title for the dt-binding document by removing Xilinx
>   wording.
> - Added a full stop to the end of the commit messages.
> - Removed extra blank lines.
> - Used hyphen for a node name.
> - Added more recipients to the mailing list.
> 
> Sia Jee Heng (6):
>   dt-bindings: riscv: Add StarFive Dubhe compatibles
>   dt-bindings: riscv: Add StarFive JH8100 SoC
>   dt-bindings: timer: Add StarFive JH8100 clint
>   dt-bindings: interrupt-controller: Add StarFive JH8100 plic
>   dt-bindings: serial: cdns: Add new compatible string for StarFive
>     JH8100 UART
>   riscv: dts: starfive: Add initial StarFive JH8100 device tree
> 
>  .../sifive,plic-1.0.0.yaml                    |   1 +
>  .../devicetree/bindings/riscv/cpus.yaml       |   2 +
>  .../devicetree/bindings/riscv/starfive.yaml   |   5 +-
>  .../devicetree/bindings/serial/cdns,uart.yaml |   4 +
>  .../bindings/timer/sifive,clint.yaml          |   1 +
>  arch/riscv/boot/dts/starfive/Makefile         |   1 +
>  arch/riscv/boot/dts/starfive/jh8100-evb.dts   |  28 ++
>  arch/riscv/boot/dts/starfive/jh8100.dtsi      | 378 ++++++++++++++++++
>  8 files changed, 419 insertions(+), 1 deletion(-)
>  create mode 100644 arch/riscv/boot/dts/starfive/jh8100-evb.dts
>  create mode 100644 arch/riscv/boot/dts/starfive/jh8100.dtsi
> 
> 
> base-commit: 18d46e76d7c2eedd8577fae67e3f1d4db25018b0
> --
> 2.34.1