[v13,00/56] Add DELETE_BUF ioctl

  Unlike when resolution change on keyframes, dynamic resolution change
on inter frames doesn't allow to do a stream off/on sequence because
it is need to keep all previous references alive to decode inter frames.
This constraint have two main problems:
- more memory consumption.
- more buffers in use.
To solve these issue this series introduce DELETE_BUFS ioctl and remove
the 32 buffers limit per queue.

VP9 conformance tests using fluster give a score of 210/305.
The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok
but require to use postprocessor.

Kernel branch is available here:
https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v13

GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
change is here:
https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc

changes in version 13:
- Fix typo and wording in commits messages.
- Only apply V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS on createbufs ioctl
- Fix queue setup test in test-drivers

changes in version 12:
- Change flag name to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS.
- Rework some commits message.
- Change vb2_queue_or_prepare_buf() prototype.
- Rework patches where 'min_buffers_needed' was badly used.

changes in version 11:
- Patches ordering:
  1 to 3: clean up
  3 to 42: use vb2_get_buffer() and vb2_get_num_buffers()
  43 to 46: allow to use more than 32 buffers per queue
  47 to 50: allow verisilicon driver to do VP9 dynamic resolution change
            (which was the main purpose of this work)
  51 to 56: prepare and introduce delete buffers feature.
- Add a patch to rename 'off' to offset.
- Add maintainers CC to drivers patches

changes in version 10:
- Make BUFFER_INDEX_MASK definition more readable
- Rebase on media_stage/master branch and add a patch for nuvoton
  driver.
- Fix issue on patch 13

changes in version 9:
- BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match
  architectures requirements.
- Correctly initialize max_num_buffers in vb2_core_queue_init()
- run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures.
- fix compilation issue in patch 50



 
Benjamin Gaignard (56):
  media: videobuf2: Rename offset parameter
  media: videobuf2: Rework offset 'cookie' encoding pattern
  media: videobuf2: Stop spamming kernel log with all queue counter
  media: videobuf2: Use vb2_buffer instead of index
  media: videobuf2: Access vb2_queue bufs array through helper functions
  media: videobuf2: Remove duplicated index vs q->num_buffers check
  media: videobuf2: Add helper to get queue number of buffers
  media: videobuf2: Use vb2_get_num_buffers() helper
  media: amphion: Use vb2_get_buffer() instead of directly access to
    buffers array
  media: amphion: Stop direct calls to queue num_buffers field
  media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
    to buffers array
  media: mediatek: vdec: Remove useless loop
  media: mediatek: vcodec: Stop direct calls to queue num_buffers field
  media: sti: hva: Use vb2_get_buffer() instead of directly access to
    buffers array
  media: visl: Use vb2_get_buffer() instead of directly access to
    buffers array
  media: atomisp: Use vb2_get_buffer() instead of directly access to
    buffers array
  media: atomisp: Stop direct calls to queue num_buffers field
  media: dvb-core: Use vb2_get_buffer() instead of directly access to
    buffers array
  media: dvb-core: Do not initialize twice queue num_buffer field
  media: dvb-frontends: rtl2832: Stop direct calls to queue num_buffers
    field
  media: pci: dt3155: Remove useless check
  media: pci: tw686x: Stop direct calls to queue num_buffers field
  media: pci: cx18: Stop direct calls to queue num_buffers field
  media: pci: netup_unidvb: Stop direct calls to queue num_buffers field
  media: pci: tw68: Stop direct calls to queue num_buffers field
  media: i2c: video-i2c: Stop direct calls to queue num_buffers field
  media: coda: Stop direct calls to queue num_buffers field
  media: nxp: Stop direct calls to queue num_buffers field
  media: verisilicon: Stop direct calls to queue num_buffers field
  media: test-drivers: Stop direct calls to queue num_buffers field
  media: imx: Stop direct calls to queue num_buffers field
  media: meson: vdec: Stop direct calls to queue num_buffers field
  touchscreen: sur40: Stop direct calls to queue num_buffers field
  sample: v4l: Stop direct calls to queue num_buffers field
  media: cedrus: Stop direct calls to queue num_buffers field
  media: nuvoton: Stop direct calls to queue num_buffers field
  media: renesas: Stop direct calls to queue num_buffers field
  media: ti: Stop direct calls to queue num_buffers field
  media: usb: airspy: Stop direct calls to queue num_buffers field
  media: usb: cx231xx: Stop direct calls to queue num_buffers field
  media: usb: hackrf: Stop direct calls to queue num_buffers field
  media: usb: usbtv: Stop direct calls to queue num_buffers field
  media: videobuf2: Be more flexible on the number of queue stored
    buffers
  media: core: Report the maximum possible number of buffers for the
    queue
  media: test-drivers: vivid: Increase max supported buffers for capture
    queues
  media: test-drivers: vicodec: Increase max supported capture queue
    buffers
  media: verisilicon: Refactor postprocessor to store more buffers
  media: verisilicon: Store chroma and motion vectors offset
  media: verisilicon: g2: Use common helpers to compute chroma and mv
    offsets
  media: verisilicon: vp9: Allow to change resolution while streaming
  media: core: Rework how create_buf index returned value is computed
  media: core: Add bitmap manage bufs array entries
  media: core: Free range of buffers
  media: v4l2: Add DELETE_BUFS ioctl
  media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
  media: test-drivers: Use helper for DELETE_BUFS ioctl

 .../userspace-api/media/v4l/user-func.rst     |   1 +
 .../media/v4l/vidioc-create-bufs.rst          |   8 +-
 .../media/v4l/vidioc-delete-bufs.rst          |  80 +++
 .../media/v4l/vidioc-reqbufs.rst              |   2 +
 drivers/input/touchscreen/sur40.c             |   5 +-
 .../media/common/videobuf2/videobuf2-core.c   | 569 +++++++++++-------
 .../media/common/videobuf2/videobuf2-v4l2.c   | 125 ++--
 drivers/media/dvb-core/dvb_vb2.c              |  17 +-
 drivers/media/dvb-frontends/rtl2832_sdr.c     |   5 +-
 drivers/media/i2c/video-i2c.c                 |   5 +-
 drivers/media/pci/cx18/cx18-streams.c         |   5 +-
 drivers/media/pci/dt3155/dt3155.c             |   2 -
 .../pci/netup_unidvb/netup_unidvb_core.c      |   5 +-
 drivers/media/pci/tw68/tw68-video.c           |   4 +-
 drivers/media/pci/tw686x/tw686x-video.c       |   5 +-
 drivers/media/platform/amphion/vpu_dbg.c      |  30 +-
 drivers/media/platform/amphion/vpu_v4l2.c     |   4 +-
 .../media/platform/chips-media/coda-common.c  |   2 +-
 .../platform/mediatek/jpeg/mtk_jpeg_core.c    |   7 +-
 .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c |   9 +-
 .../mediatek/vcodec/encoder/mtk_vcodec_enc.c  |   2 +-
 drivers/media/platform/nuvoton/npcm-video.c   |   2 +-
 drivers/media/platform/nxp/imx7-media-csi.c   |   7 +-
 drivers/media/platform/renesas/rcar_drif.c    |   5 +-
 drivers/media/platform/st/sti/hva/hva-v4l2.c  |   9 +-
 .../media/platform/ti/am437x/am437x-vpfe.c    |   5 +-
 drivers/media/platform/ti/cal/cal-video.c     |   5 +-
 .../media/platform/ti/davinci/vpif_capture.c  |   5 +-
 .../media/platform/ti/davinci/vpif_display.c  |   5 +-
 drivers/media/platform/ti/omap/omap_vout.c    |   5 +-
 drivers/media/platform/verisilicon/hantro.h   |   9 +-
 .../media/platform/verisilicon/hantro_drv.c   |   5 +-
 .../media/platform/verisilicon/hantro_g2.c    |  14 +
 .../platform/verisilicon/hantro_g2_hevc_dec.c |  18 +-
 .../platform/verisilicon/hantro_g2_vp9_dec.c  |  28 +-
 .../media/platform/verisilicon/hantro_hw.h    |   7 +-
 .../platform/verisilicon/hantro_postproc.c    |  93 ++-
 .../media/platform/verisilicon/hantro_v4l2.c  |  27 +-
 .../media/test-drivers/vicodec/vicodec-core.c |   3 +
 drivers/media/test-drivers/vim2m.c            |   2 +
 .../media/test-drivers/vimc/vimc-capture.c    |   2 +
 drivers/media/test-drivers/visl/visl-dec.c    |  32 +-
 drivers/media/test-drivers/visl/visl-video.c  |   2 +
 drivers/media/test-drivers/vivid/vivid-core.c |  21 +
 .../media/test-drivers/vivid/vivid-meta-cap.c |   3 -
 .../media/test-drivers/vivid/vivid-meta-out.c |   5 +-
 .../test-drivers/vivid/vivid-touch-cap.c      |   5 +-
 .../media/test-drivers/vivid/vivid-vbi-cap.c  |   3 -
 .../media/test-drivers/vivid/vivid-vbi-out.c  |   3 -
 .../media/test-drivers/vivid/vivid-vid-cap.c  |   3 -
 .../media/test-drivers/vivid/vivid-vid-out.c  |   5 +-
 drivers/media/usb/airspy/airspy.c             |   5 +-
 drivers/media/usb/cx231xx/cx231xx-417.c       |   5 +-
 drivers/media/usb/cx231xx/cx231xx-video.c     |   5 +-
 drivers/media/usb/hackrf/hackrf.c             |   5 +-
 drivers/media/usb/usbtv/usbtv-video.c         |   5 +-
 drivers/media/v4l2-core/v4l2-dev.c            |   1 +
 drivers/media/v4l2-core/v4l2-ioctl.c          |  21 +-
 drivers/media/v4l2-core/v4l2-mem2mem.c        |  20 +
 .../staging/media/atomisp/pci/atomisp_ioctl.c |   4 +-
 drivers/staging/media/imx/imx-media-capture.c |   7 +-
 drivers/staging/media/meson/vdec/vdec.c       |  13 +-
 .../staging/media/sunxi/cedrus/cedrus_h264.c  |   9 +-
 .../staging/media/sunxi/cedrus/cedrus_h265.c  |   9 +-
 include/media/v4l2-ioctl.h                    |   4 +
 include/media/v4l2-mem2mem.h                  |  12 +
 include/media/videobuf2-core.h                |  65 +-
 include/media/videobuf2-v4l2.h                |  13 +
 include/uapi/linux/videodev2.h                |  24 +-
 samples/v4l/v4l2-pci-skeleton.c               |   5 +-
 70 files changed, 990 insertions(+), 472 deletions(-)
 create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
  

On 19/10/2023 14:51, Benjamin Gaignard wrote:
> Unlike when resolution change on keyframes, dynamic resolution change
> on inter frames doesn't allow to do a stream off/on sequence because
> it is need to keep all previous references alive to decode inter frames.
> This constraint have two main problems:
> - more memory consumption.
> - more buffers in use.
> To solve these issue this series introduce DELETE_BUFS ioctl and remove
> the 32 buffers limit per queue.
> 
> VP9 conformance tests using fluster give a score of 210/305.
> The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok
> but require to use postprocessor.
> 
> Kernel branch is available here:
> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v13
> 
> GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
> change is here:
> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc

A quick status update: I've asked others to review the v4l2/vb2 core patches
of 01-50. If nothing new crops up, then I plan to get patches 01-50 merged
early in the 6.8 cycle.

Before we can start on the remaining patches, we need to review drivers that
use min_buffers_needed and drivers where queue_setup checks if 'enough' buffers
are allocated.

We likely will need to make changes there before we can add DELETE_BUFS.

Regards,

	Hans

> 
> changes in version 13:
> - Fix typo and wording in commits messages.
> - Only apply V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS on createbufs ioctl
> - Fix queue setup test in test-drivers
> 
> changes in version 12:
> - Change flag name to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS.
> - Rework some commits message.
> - Change vb2_queue_or_prepare_buf() prototype.
> - Rework patches where 'min_buffers_needed' was badly used.
> 
> changes in version 11:
> - Patches ordering:
>   1 to 3: clean up
>   3 to 42: use vb2_get_buffer() and vb2_get_num_buffers()
>   43 to 46: allow to use more than 32 buffers per queue
>   47 to 50: allow verisilicon driver to do VP9 dynamic resolution change
>             (which was the main purpose of this work)
>   51 to 56: prepare and introduce delete buffers feature.
> - Add a patch to rename 'off' to offset.
> - Add maintainers CC to drivers patches
> 
> changes in version 10:
> - Make BUFFER_INDEX_MASK definition more readable
> - Rebase on media_stage/master branch and add a patch for nuvoton
>   driver.
> - Fix issue on patch 13
> 
> changes in version 9:
> - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match
>   architectures requirements.
> - Correctly initialize max_num_buffers in vb2_core_queue_init()
> - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures.
> - fix compilation issue in patch 50
> 
> 
> 
>  
> Benjamin Gaignard (56):
>   media: videobuf2: Rename offset parameter
>   media: videobuf2: Rework offset 'cookie' encoding pattern
>   media: videobuf2: Stop spamming kernel log with all queue counter
>   media: videobuf2: Use vb2_buffer instead of index
>   media: videobuf2: Access vb2_queue bufs array through helper functions
>   media: videobuf2: Remove duplicated index vs q->num_buffers check
>   media: videobuf2: Add helper to get queue number of buffers
>   media: videobuf2: Use vb2_get_num_buffers() helper
>   media: amphion: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: amphion: Stop direct calls to queue num_buffers field
>   media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
>     to buffers array
>   media: mediatek: vdec: Remove useless loop
>   media: mediatek: vcodec: Stop direct calls to queue num_buffers field
>   media: sti: hva: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: visl: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: atomisp: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: atomisp: Stop direct calls to queue num_buffers field
>   media: dvb-core: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: dvb-core: Do not initialize twice queue num_buffer field
>   media: dvb-frontends: rtl2832: Stop direct calls to queue num_buffers
>     field
>   media: pci: dt3155: Remove useless check
>   media: pci: tw686x: Stop direct calls to queue num_buffers field
>   media: pci: cx18: Stop direct calls to queue num_buffers field
>   media: pci: netup_unidvb: Stop direct calls to queue num_buffers field
>   media: pci: tw68: Stop direct calls to queue num_buffers field
>   media: i2c: video-i2c: Stop direct calls to queue num_buffers field
>   media: coda: Stop direct calls to queue num_buffers field
>   media: nxp: Stop direct calls to queue num_buffers field
>   media: verisilicon: Stop direct calls to queue num_buffers field
>   media: test-drivers: Stop direct calls to queue num_buffers field
>   media: imx: Stop direct calls to queue num_buffers field
>   media: meson: vdec: Stop direct calls to queue num_buffers field
>   touchscreen: sur40: Stop direct calls to queue num_buffers field
>   sample: v4l: Stop direct calls to queue num_buffers field
>   media: cedrus: Stop direct calls to queue num_buffers field
>   media: nuvoton: Stop direct calls to queue num_buffers field
>   media: renesas: Stop direct calls to queue num_buffers field
>   media: ti: Stop direct calls to queue num_buffers field
>   media: usb: airspy: Stop direct calls to queue num_buffers field
>   media: usb: cx231xx: Stop direct calls to queue num_buffers field
>   media: usb: hackrf: Stop direct calls to queue num_buffers field
>   media: usb: usbtv: Stop direct calls to queue num_buffers field
>   media: videobuf2: Be more flexible on the number of queue stored
>     buffers
>   media: core: Report the maximum possible number of buffers for the
>     queue
>   media: test-drivers: vivid: Increase max supported buffers for capture
>     queues
>   media: test-drivers: vicodec: Increase max supported capture queue
>     buffers
>   media: verisilicon: Refactor postprocessor to store more buffers
>   media: verisilicon: Store chroma and motion vectors offset
>   media: verisilicon: g2: Use common helpers to compute chroma and mv
>     offsets
>   media: verisilicon: vp9: Allow to change resolution while streaming
>   media: core: Rework how create_buf index returned value is computed
>   media: core: Add bitmap manage bufs array entries
>   media: core: Free range of buffers
>   media: v4l2: Add DELETE_BUFS ioctl
>   media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
>   media: test-drivers: Use helper for DELETE_BUFS ioctl
> 
>  .../userspace-api/media/v4l/user-func.rst     |   1 +
>  .../media/v4l/vidioc-create-bufs.rst          |   8 +-
>  .../media/v4l/vidioc-delete-bufs.rst          |  80 +++
>  .../media/v4l/vidioc-reqbufs.rst              |   2 +
>  drivers/input/touchscreen/sur40.c             |   5 +-
>  .../media/common/videobuf2/videobuf2-core.c   | 569 +++++++++++-------
>  .../media/common/videobuf2/videobuf2-v4l2.c   | 125 ++--
>  drivers/media/dvb-core/dvb_vb2.c              |  17 +-
>  drivers/media/dvb-frontends/rtl2832_sdr.c     |   5 +-
>  drivers/media/i2c/video-i2c.c                 |   5 +-
>  drivers/media/pci/cx18/cx18-streams.c         |   5 +-
>  drivers/media/pci/dt3155/dt3155.c             |   2 -
>  .../pci/netup_unidvb/netup_unidvb_core.c      |   5 +-
>  drivers/media/pci/tw68/tw68-video.c           |   4 +-
>  drivers/media/pci/tw686x/tw686x-video.c       |   5 +-
>  drivers/media/platform/amphion/vpu_dbg.c      |  30 +-
>  drivers/media/platform/amphion/vpu_v4l2.c     |   4 +-
>  .../media/platform/chips-media/coda-common.c  |   2 +-
>  .../platform/mediatek/jpeg/mtk_jpeg_core.c    |   7 +-
>  .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c |   9 +-
>  .../mediatek/vcodec/encoder/mtk_vcodec_enc.c  |   2 +-
>  drivers/media/platform/nuvoton/npcm-video.c   |   2 +-
>  drivers/media/platform/nxp/imx7-media-csi.c   |   7 +-
>  drivers/media/platform/renesas/rcar_drif.c    |   5 +-
>  drivers/media/platform/st/sti/hva/hva-v4l2.c  |   9 +-
>  .../media/platform/ti/am437x/am437x-vpfe.c    |   5 +-
>  drivers/media/platform/ti/cal/cal-video.c     |   5 +-
>  .../media/platform/ti/davinci/vpif_capture.c  |   5 +-
>  .../media/platform/ti/davinci/vpif_display.c  |   5 +-
>  drivers/media/platform/ti/omap/omap_vout.c    |   5 +-
>  drivers/media/platform/verisilicon/hantro.h   |   9 +-
>  .../media/platform/verisilicon/hantro_drv.c   |   5 +-
>  .../media/platform/verisilicon/hantro_g2.c    |  14 +
>  .../platform/verisilicon/hantro_g2_hevc_dec.c |  18 +-
>  .../platform/verisilicon/hantro_g2_vp9_dec.c  |  28 +-
>  .../media/platform/verisilicon/hantro_hw.h    |   7 +-
>  .../platform/verisilicon/hantro_postproc.c    |  93 ++-
>  .../media/platform/verisilicon/hantro_v4l2.c  |  27 +-
>  .../media/test-drivers/vicodec/vicodec-core.c |   3 +
>  drivers/media/test-drivers/vim2m.c            |   2 +
>  .../media/test-drivers/vimc/vimc-capture.c    |   2 +
>  drivers/media/test-drivers/visl/visl-dec.c    |  32 +-
>  drivers/media/test-drivers/visl/visl-video.c  |   2 +
>  drivers/media/test-drivers/vivid/vivid-core.c |  21 +
>  .../media/test-drivers/vivid/vivid-meta-cap.c |   3 -
>  .../media/test-drivers/vivid/vivid-meta-out.c |   5 +-
>  .../test-drivers/vivid/vivid-touch-cap.c      |   5 +-
>  .../media/test-drivers/vivid/vivid-vbi-cap.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vbi-out.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vid-cap.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vid-out.c  |   5 +-
>  drivers/media/usb/airspy/airspy.c             |   5 +-
>  drivers/media/usb/cx231xx/cx231xx-417.c       |   5 +-
>  drivers/media/usb/cx231xx/cx231xx-video.c     |   5 +-
>  drivers/media/usb/hackrf/hackrf.c             |   5 +-
>  drivers/media/usb/usbtv/usbtv-video.c         |   5 +-
>  drivers/media/v4l2-core/v4l2-dev.c            |   1 +
>  drivers/media/v4l2-core/v4l2-ioctl.c          |  21 +-
>  drivers/media/v4l2-core/v4l2-mem2mem.c        |  20 +
>  .../staging/media/atomisp/pci/atomisp_ioctl.c |   4 +-
>  drivers/staging/media/imx/imx-media-capture.c |   7 +-
>  drivers/staging/media/meson/vdec/vdec.c       |  13 +-
>  .../staging/media/sunxi/cedrus/cedrus_h264.c  |   9 +-
>  .../staging/media/sunxi/cedrus/cedrus_h265.c  |   9 +-
>  include/media/v4l2-ioctl.h                    |   4 +
>  include/media/v4l2-mem2mem.h                  |  12 +
>  include/media/videobuf2-core.h                |  65 +-
>  include/media/videobuf2-v4l2.h                |  13 +
>  include/uapi/linux/videodev2.h                |  24 +-
>  samples/v4l/v4l2-pci-skeleton.c               |   5 +-
>  70 files changed, 990 insertions(+), 472 deletions(-)
>  create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
>
  

Hi Benjamin,

On 19/10/2023 14:51, Benjamin Gaignard wrote:
> Unlike when resolution change on keyframes, dynamic resolution change
> on inter frames doesn't allow to do a stream off/on sequence because
> it is need to keep all previous references alive to decode inter frames.
> This constraint have two main problems:
> - more memory consumption.
> - more buffers in use.
> To solve these issue this series introduce DELETE_BUFS ioctl and remove
> the 32 buffers limit per queue.
> 
> VP9 conformance tests using fluster give a score of 210/305.
> The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok
> but require to use postprocessor.
> 
> Kernel branch is available here:
> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v13
> 
> GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
> change is here:
> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc
> 

I'll just write the comments here since I never received patch 44 in my mailbox.
The messages are sent too quickly and my provider just throws some away if that
happens for a long series like this, very annoying. You can configure git to
slow down sending emails, if you can look into that, then that would be great.
It seems to happen whenever more than approx. 30-35 patches are sent off very
quickly.

In any case, a v14 is needed: when testing with -virtme and the patched v4l2-compliance
it fails the 32 bit test. You need to add max_num_buffers support to
drivers/media/v4l2-core/v4l2-compat-ioctl32.c.

And since a v14 is needed because of that it would be nice if you can also
make two small changes to patch 44/56:

The commit log still refers to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS (the old
name). And in v4l_print_create_buffers() you log the value as "max buffers",
just make that "max num buffers" for consistency.

Regards,

	Hans

> changes in version 13:
> - Fix typo and wording in commits messages.
> - Only apply V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS on createbufs ioctl
> - Fix queue setup test in test-drivers
> 
> changes in version 12:
> - Change flag name to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS.
> - Rework some commits message.
> - Change vb2_queue_or_prepare_buf() prototype.
> - Rework patches where 'min_buffers_needed' was badly used.
> 
> changes in version 11:
> - Patches ordering:
>   1 to 3: clean up
>   3 to 42: use vb2_get_buffer() and vb2_get_num_buffers()
>   43 to 46: allow to use more than 32 buffers per queue
>   47 to 50: allow verisilicon driver to do VP9 dynamic resolution change
>             (which was the main purpose of this work)
>   51 to 56: prepare and introduce delete buffers feature.
> - Add a patch to rename 'off' to offset.
> - Add maintainers CC to drivers patches
> 
> changes in version 10:
> - Make BUFFER_INDEX_MASK definition more readable
> - Rebase on media_stage/master branch and add a patch for nuvoton
>   driver.
> - Fix issue on patch 13
> 
> changes in version 9:
> - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match
>   architectures requirements.
> - Correctly initialize max_num_buffers in vb2_core_queue_init()
> - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures.
> - fix compilation issue in patch 50
> 
> 
> 
>  
> Benjamin Gaignard (56):
>   media: videobuf2: Rename offset parameter
>   media: videobuf2: Rework offset 'cookie' encoding pattern
>   media: videobuf2: Stop spamming kernel log with all queue counter
>   media: videobuf2: Use vb2_buffer instead of index
>   media: videobuf2: Access vb2_queue bufs array through helper functions
>   media: videobuf2: Remove duplicated index vs q->num_buffers check
>   media: videobuf2: Add helper to get queue number of buffers
>   media: videobuf2: Use vb2_get_num_buffers() helper
>   media: amphion: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: amphion: Stop direct calls to queue num_buffers field
>   media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
>     to buffers array
>   media: mediatek: vdec: Remove useless loop
>   media: mediatek: vcodec: Stop direct calls to queue num_buffers field
>   media: sti: hva: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: visl: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: atomisp: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: atomisp: Stop direct calls to queue num_buffers field
>   media: dvb-core: Use vb2_get_buffer() instead of directly access to
>     buffers array
>   media: dvb-core: Do not initialize twice queue num_buffer field
>   media: dvb-frontends: rtl2832: Stop direct calls to queue num_buffers
>     field
>   media: pci: dt3155: Remove useless check
>   media: pci: tw686x: Stop direct calls to queue num_buffers field
>   media: pci: cx18: Stop direct calls to queue num_buffers field
>   media: pci: netup_unidvb: Stop direct calls to queue num_buffers field
>   media: pci: tw68: Stop direct calls to queue num_buffers field
>   media: i2c: video-i2c: Stop direct calls to queue num_buffers field
>   media: coda: Stop direct calls to queue num_buffers field
>   media: nxp: Stop direct calls to queue num_buffers field
>   media: verisilicon: Stop direct calls to queue num_buffers field
>   media: test-drivers: Stop direct calls to queue num_buffers field
>   media: imx: Stop direct calls to queue num_buffers field
>   media: meson: vdec: Stop direct calls to queue num_buffers field
>   touchscreen: sur40: Stop direct calls to queue num_buffers field
>   sample: v4l: Stop direct calls to queue num_buffers field
>   media: cedrus: Stop direct calls to queue num_buffers field
>   media: nuvoton: Stop direct calls to queue num_buffers field
>   media: renesas: Stop direct calls to queue num_buffers field
>   media: ti: Stop direct calls to queue num_buffers field
>   media: usb: airspy: Stop direct calls to queue num_buffers field
>   media: usb: cx231xx: Stop direct calls to queue num_buffers field
>   media: usb: hackrf: Stop direct calls to queue num_buffers field
>   media: usb: usbtv: Stop direct calls to queue num_buffers field
>   media: videobuf2: Be more flexible on the number of queue stored
>     buffers
>   media: core: Report the maximum possible number of buffers for the
>     queue
>   media: test-drivers: vivid: Increase max supported buffers for capture
>     queues
>   media: test-drivers: vicodec: Increase max supported capture queue
>     buffers
>   media: verisilicon: Refactor postprocessor to store more buffers
>   media: verisilicon: Store chroma and motion vectors offset
>   media: verisilicon: g2: Use common helpers to compute chroma and mv
>     offsets
>   media: verisilicon: vp9: Allow to change resolution while streaming
>   media: core: Rework how create_buf index returned value is computed
>   media: core: Add bitmap manage bufs array entries
>   media: core: Free range of buffers
>   media: v4l2: Add DELETE_BUFS ioctl
>   media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
>   media: test-drivers: Use helper for DELETE_BUFS ioctl
> 
>  .../userspace-api/media/v4l/user-func.rst     |   1 +
>  .../media/v4l/vidioc-create-bufs.rst          |   8 +-
>  .../media/v4l/vidioc-delete-bufs.rst          |  80 +++
>  .../media/v4l/vidioc-reqbufs.rst              |   2 +
>  drivers/input/touchscreen/sur40.c             |   5 +-
>  .../media/common/videobuf2/videobuf2-core.c   | 569 +++++++++++-------
>  .../media/common/videobuf2/videobuf2-v4l2.c   | 125 ++--
>  drivers/media/dvb-core/dvb_vb2.c              |  17 +-
>  drivers/media/dvb-frontends/rtl2832_sdr.c     |   5 +-
>  drivers/media/i2c/video-i2c.c                 |   5 +-
>  drivers/media/pci/cx18/cx18-streams.c         |   5 +-
>  drivers/media/pci/dt3155/dt3155.c             |   2 -
>  .../pci/netup_unidvb/netup_unidvb_core.c      |   5 +-
>  drivers/media/pci/tw68/tw68-video.c           |   4 +-
>  drivers/media/pci/tw686x/tw686x-video.c       |   5 +-
>  drivers/media/platform/amphion/vpu_dbg.c      |  30 +-
>  drivers/media/platform/amphion/vpu_v4l2.c     |   4 +-
>  .../media/platform/chips-media/coda-common.c  |   2 +-
>  .../platform/mediatek/jpeg/mtk_jpeg_core.c    |   7 +-
>  .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c |   9 +-
>  .../mediatek/vcodec/encoder/mtk_vcodec_enc.c  |   2 +-
>  drivers/media/platform/nuvoton/npcm-video.c   |   2 +-
>  drivers/media/platform/nxp/imx7-media-csi.c   |   7 +-
>  drivers/media/platform/renesas/rcar_drif.c    |   5 +-
>  drivers/media/platform/st/sti/hva/hva-v4l2.c  |   9 +-
>  .../media/platform/ti/am437x/am437x-vpfe.c    |   5 +-
>  drivers/media/platform/ti/cal/cal-video.c     |   5 +-
>  .../media/platform/ti/davinci/vpif_capture.c  |   5 +-
>  .../media/platform/ti/davinci/vpif_display.c  |   5 +-
>  drivers/media/platform/ti/omap/omap_vout.c    |   5 +-
>  drivers/media/platform/verisilicon/hantro.h   |   9 +-
>  .../media/platform/verisilicon/hantro_drv.c   |   5 +-
>  .../media/platform/verisilicon/hantro_g2.c    |  14 +
>  .../platform/verisilicon/hantro_g2_hevc_dec.c |  18 +-
>  .../platform/verisilicon/hantro_g2_vp9_dec.c  |  28 +-
>  .../media/platform/verisilicon/hantro_hw.h    |   7 +-
>  .../platform/verisilicon/hantro_postproc.c    |  93 ++-
>  .../media/platform/verisilicon/hantro_v4l2.c  |  27 +-
>  .../media/test-drivers/vicodec/vicodec-core.c |   3 +
>  drivers/media/test-drivers/vim2m.c            |   2 +
>  .../media/test-drivers/vimc/vimc-capture.c    |   2 +
>  drivers/media/test-drivers/visl/visl-dec.c    |  32 +-
>  drivers/media/test-drivers/visl/visl-video.c  |   2 +
>  drivers/media/test-drivers/vivid/vivid-core.c |  21 +
>  .../media/test-drivers/vivid/vivid-meta-cap.c |   3 -
>  .../media/test-drivers/vivid/vivid-meta-out.c |   5 +-
>  .../test-drivers/vivid/vivid-touch-cap.c      |   5 +-
>  .../media/test-drivers/vivid/vivid-vbi-cap.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vbi-out.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vid-cap.c  |   3 -
>  .../media/test-drivers/vivid/vivid-vid-out.c  |   5 +-
>  drivers/media/usb/airspy/airspy.c             |   5 +-
>  drivers/media/usb/cx231xx/cx231xx-417.c       |   5 +-
>  drivers/media/usb/cx231xx/cx231xx-video.c     |   5 +-
>  drivers/media/usb/hackrf/hackrf.c             |   5 +-
>  drivers/media/usb/usbtv/usbtv-video.c         |   5 +-
>  drivers/media/v4l2-core/v4l2-dev.c            |   1 +
>  drivers/media/v4l2-core/v4l2-ioctl.c          |  21 +-
>  drivers/media/v4l2-core/v4l2-mem2mem.c        |  20 +
>  .../staging/media/atomisp/pci/atomisp_ioctl.c |   4 +-
>  drivers/staging/media/imx/imx-media-capture.c |   7 +-
>  drivers/staging/media/meson/vdec/vdec.c       |  13 +-
>  .../staging/media/sunxi/cedrus/cedrus_h264.c  |   9 +-
>  .../staging/media/sunxi/cedrus/cedrus_h265.c  |   9 +-
>  include/media/v4l2-ioctl.h                    |   4 +
>  include/media/v4l2-mem2mem.h                  |  12 +
>  include/media/videobuf2-core.h                |  65 +-
>  include/media/videobuf2-v4l2.h                |  13 +
>  include/uapi/linux/videodev2.h                |  24 +-
>  samples/v4l/v4l2-pci-skeleton.c               |   5 +-
>  70 files changed, 990 insertions(+), 472 deletions(-)
>  create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
>
  

Le 31/10/2023 à 10:04, Hans Verkuil a écrit :
> Hi Benjamin,
>
> On 19/10/2023 14:51, Benjamin Gaignard wrote:
>> Unlike when resolution change on keyframes, dynamic resolution change
>> on inter frames doesn't allow to do a stream off/on sequence because
>> it is need to keep all previous references alive to decode inter frames.
>> This constraint have two main problems:
>> - more memory consumption.
>> - more buffers in use.
>> To solve these issue this series introduce DELETE_BUFS ioctl and remove
>> the 32 buffers limit per queue.
>>
>> VP9 conformance tests using fluster give a score of 210/305.
>> The 20 resize inter tests (vp90-2-21-resize_inter_* files) are ok
>> but require to use postprocessor.
>>
>> Kernel branch is available here:
>> https://gitlab.collabora.com/benjamin.gaignard/for-upstream/-/commits/remove_vb2_queue_limit_v13
>>
>> GStreamer branch to use DELETE_BUF ioctl and testing dynamic resolution
>> change is here:
>> https://gitlab.freedesktop.org/benjamin.gaignard1/gstreamer/-/commits/VP9_drc
>>
> I'll just write the comments here since I never received patch 44 in my mailbox.
> The messages are sent too quickly and my provider just throws some away if that
> happens for a long series like this, very annoying. You can configure git to
> slow down sending emails, if you can look into that, then that would be great.
> It seems to happen whenever more than approx. 30-35 patches are sent off very
> quickly.

I have send the patches of the next version (v14) using git send-email yes option
for each patch rather all option. Tell me if it better.

>
> In any case, a v14 is needed: when testing with -virtme and the patched v4l2-compliance
> it fails the 32 bit test. You need to add max_num_buffers support to
> drivers/media/v4l2-core/v4l2-compat-ioctl32.c.

I haven't be able to test using v4l2-compliance-32 but I have add code for
it in v4l2-compat-ioctl32.c. It should work fine.

>
> And since a v14 is needed because of that it would be nice if you can also
> make two small changes to patch 44/56:
>
> The commit log still refers to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS (the old
> name). And in v4l_print_create_buffers() you log the value as "max buffers",
> just make that "max num buffers" for consistency.

Done in v14

Regards,
Benjamin

>
> Regards,
>
> 	Hans
>
>> changes in version 13:
>> - Fix typo and wording in commits messages.
>> - Only apply V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS on createbufs ioctl
>> - Fix queue setup test in test-drivers
>>
>> changes in version 12:
>> - Change flag name to V4L2_BUF_CAP_SUPPORTS_SET_MAX_BUFS.
>> - Rework some commits message.
>> - Change vb2_queue_or_prepare_buf() prototype.
>> - Rework patches where 'min_buffers_needed' was badly used.
>>
>> changes in version 11:
>> - Patches ordering:
>>    1 to 3: clean up
>>    3 to 42: use vb2_get_buffer() and vb2_get_num_buffers()
>>    43 to 46: allow to use more than 32 buffers per queue
>>    47 to 50: allow verisilicon driver to do VP9 dynamic resolution change
>>              (which was the main purpose of this work)
>>    51 to 56: prepare and introduce delete buffers feature.
>> - Add a patch to rename 'off' to offset.
>> - Add maintainers CC to drivers patches
>>
>> changes in version 10:
>> - Make BUFFER_INDEX_MASK definition more readable
>> - Rebase on media_stage/master branch and add a patch for nuvoton
>>    driver.
>> - Fix issue on patch 13
>>
>> changes in version 9:
>> - BUFFER_INDEX_MASK now depends on PAGE_SHIFT value to match
>>    architectures requirements.
>> - Correctly initialize max_num_buffers in vb2_core_queue_init()
>> - run 'test-media -kmemleak mc' on top of the series and on patches 1 to 47 without failures.
>> - fix compilation issue in patch 50
>>
>>
>>
>>   
>> Benjamin Gaignard (56):
>>    media: videobuf2: Rename offset parameter
>>    media: videobuf2: Rework offset 'cookie' encoding pattern
>>    media: videobuf2: Stop spamming kernel log with all queue counter
>>    media: videobuf2: Use vb2_buffer instead of index
>>    media: videobuf2: Access vb2_queue bufs array through helper functions
>>    media: videobuf2: Remove duplicated index vs q->num_buffers check
>>    media: videobuf2: Add helper to get queue number of buffers
>>    media: videobuf2: Use vb2_get_num_buffers() helper
>>    media: amphion: Use vb2_get_buffer() instead of directly access to
>>      buffers array
>>    media: amphion: Stop direct calls to queue num_buffers field
>>    media: mediatek: jpeg: Use vb2_get_buffer() instead of directly access
>>      to buffers array
>>    media: mediatek: vdec: Remove useless loop
>>    media: mediatek: vcodec: Stop direct calls to queue num_buffers field
>>    media: sti: hva: Use vb2_get_buffer() instead of directly access to
>>      buffers array
>>    media: visl: Use vb2_get_buffer() instead of directly access to
>>      buffers array
>>    media: atomisp: Use vb2_get_buffer() instead of directly access to
>>      buffers array
>>    media: atomisp: Stop direct calls to queue num_buffers field
>>    media: dvb-core: Use vb2_get_buffer() instead of directly access to
>>      buffers array
>>    media: dvb-core: Do not initialize twice queue num_buffer field
>>    media: dvb-frontends: rtl2832: Stop direct calls to queue num_buffers
>>      field
>>    media: pci: dt3155: Remove useless check
>>    media: pci: tw686x: Stop direct calls to queue num_buffers field
>>    media: pci: cx18: Stop direct calls to queue num_buffers field
>>    media: pci: netup_unidvb: Stop direct calls to queue num_buffers field
>>    media: pci: tw68: Stop direct calls to queue num_buffers field
>>    media: i2c: video-i2c: Stop direct calls to queue num_buffers field
>>    media: coda: Stop direct calls to queue num_buffers field
>>    media: nxp: Stop direct calls to queue num_buffers field
>>    media: verisilicon: Stop direct calls to queue num_buffers field
>>    media: test-drivers: Stop direct calls to queue num_buffers field
>>    media: imx: Stop direct calls to queue num_buffers field
>>    media: meson: vdec: Stop direct calls to queue num_buffers field
>>    touchscreen: sur40: Stop direct calls to queue num_buffers field
>>    sample: v4l: Stop direct calls to queue num_buffers field
>>    media: cedrus: Stop direct calls to queue num_buffers field
>>    media: nuvoton: Stop direct calls to queue num_buffers field
>>    media: renesas: Stop direct calls to queue num_buffers field
>>    media: ti: Stop direct calls to queue num_buffers field
>>    media: usb: airspy: Stop direct calls to queue num_buffers field
>>    media: usb: cx231xx: Stop direct calls to queue num_buffers field
>>    media: usb: hackrf: Stop direct calls to queue num_buffers field
>>    media: usb: usbtv: Stop direct calls to queue num_buffers field
>>    media: videobuf2: Be more flexible on the number of queue stored
>>      buffers
>>    media: core: Report the maximum possible number of buffers for the
>>      queue
>>    media: test-drivers: vivid: Increase max supported buffers for capture
>>      queues
>>    media: test-drivers: vicodec: Increase max supported capture queue
>>      buffers
>>    media: verisilicon: Refactor postprocessor to store more buffers
>>    media: verisilicon: Store chroma and motion vectors offset
>>    media: verisilicon: g2: Use common helpers to compute chroma and mv
>>      offsets
>>    media: verisilicon: vp9: Allow to change resolution while streaming
>>    media: core: Rework how create_buf index returned value is computed
>>    media: core: Add bitmap manage bufs array entries
>>    media: core: Free range of buffers
>>    media: v4l2: Add DELETE_BUFS ioctl
>>    media: v4l2: Add mem2mem helpers for DELETE_BUFS ioctl
>>    media: test-drivers: Use helper for DELETE_BUFS ioctl
>>
>>   .../userspace-api/media/v4l/user-func.rst     |   1 +
>>   .../media/v4l/vidioc-create-bufs.rst          |   8 +-
>>   .../media/v4l/vidioc-delete-bufs.rst          |  80 +++
>>   .../media/v4l/vidioc-reqbufs.rst              |   2 +
>>   drivers/input/touchscreen/sur40.c             |   5 +-
>>   .../media/common/videobuf2/videobuf2-core.c   | 569 +++++++++++-------
>>   .../media/common/videobuf2/videobuf2-v4l2.c   | 125 ++--
>>   drivers/media/dvb-core/dvb_vb2.c              |  17 +-
>>   drivers/media/dvb-frontends/rtl2832_sdr.c     |   5 +-
>>   drivers/media/i2c/video-i2c.c                 |   5 +-
>>   drivers/media/pci/cx18/cx18-streams.c         |   5 +-
>>   drivers/media/pci/dt3155/dt3155.c             |   2 -
>>   .../pci/netup_unidvb/netup_unidvb_core.c      |   5 +-
>>   drivers/media/pci/tw68/tw68-video.c           |   4 +-
>>   drivers/media/pci/tw686x/tw686x-video.c       |   5 +-
>>   drivers/media/platform/amphion/vpu_dbg.c      |  30 +-
>>   drivers/media/platform/amphion/vpu_v4l2.c     |   4 +-
>>   .../media/platform/chips-media/coda-common.c  |   2 +-
>>   .../platform/mediatek/jpeg/mtk_jpeg_core.c    |   7 +-
>>   .../vcodec/decoder/vdec/vdec_vp9_req_lat_if.c |   9 +-
>>   .../mediatek/vcodec/encoder/mtk_vcodec_enc.c  |   2 +-
>>   drivers/media/platform/nuvoton/npcm-video.c   |   2 +-
>>   drivers/media/platform/nxp/imx7-media-csi.c   |   7 +-
>>   drivers/media/platform/renesas/rcar_drif.c    |   5 +-
>>   drivers/media/platform/st/sti/hva/hva-v4l2.c  |   9 +-
>>   .../media/platform/ti/am437x/am437x-vpfe.c    |   5 +-
>>   drivers/media/platform/ti/cal/cal-video.c     |   5 +-
>>   .../media/platform/ti/davinci/vpif_capture.c  |   5 +-
>>   .../media/platform/ti/davinci/vpif_display.c  |   5 +-
>>   drivers/media/platform/ti/omap/omap_vout.c    |   5 +-
>>   drivers/media/platform/verisilicon/hantro.h   |   9 +-
>>   .../media/platform/verisilicon/hantro_drv.c   |   5 +-
>>   .../media/platform/verisilicon/hantro_g2.c    |  14 +
>>   .../platform/verisilicon/hantro_g2_hevc_dec.c |  18 +-
>>   .../platform/verisilicon/hantro_g2_vp9_dec.c  |  28 +-
>>   .../media/platform/verisilicon/hantro_hw.h    |   7 +-
>>   .../platform/verisilicon/hantro_postproc.c    |  93 ++-
>>   .../media/platform/verisilicon/hantro_v4l2.c  |  27 +-
>>   .../media/test-drivers/vicodec/vicodec-core.c |   3 +
>>   drivers/media/test-drivers/vim2m.c            |   2 +
>>   .../media/test-drivers/vimc/vimc-capture.c    |   2 +
>>   drivers/media/test-drivers/visl/visl-dec.c    |  32 +-
>>   drivers/media/test-drivers/visl/visl-video.c  |   2 +
>>   drivers/media/test-drivers/vivid/vivid-core.c |  21 +
>>   .../media/test-drivers/vivid/vivid-meta-cap.c |   3 -
>>   .../media/test-drivers/vivid/vivid-meta-out.c |   5 +-
>>   .../test-drivers/vivid/vivid-touch-cap.c      |   5 +-
>>   .../media/test-drivers/vivid/vivid-vbi-cap.c  |   3 -
>>   .../media/test-drivers/vivid/vivid-vbi-out.c  |   3 -
>>   .../media/test-drivers/vivid/vivid-vid-cap.c  |   3 -
>>   .../media/test-drivers/vivid/vivid-vid-out.c  |   5 +-
>>   drivers/media/usb/airspy/airspy.c             |   5 +-
>>   drivers/media/usb/cx231xx/cx231xx-417.c       |   5 +-
>>   drivers/media/usb/cx231xx/cx231xx-video.c     |   5 +-
>>   drivers/media/usb/hackrf/hackrf.c             |   5 +-
>>   drivers/media/usb/usbtv/usbtv-video.c         |   5 +-
>>   drivers/media/v4l2-core/v4l2-dev.c            |   1 +
>>   drivers/media/v4l2-core/v4l2-ioctl.c          |  21 +-
>>   drivers/media/v4l2-core/v4l2-mem2mem.c        |  20 +
>>   .../staging/media/atomisp/pci/atomisp_ioctl.c |   4 +-
>>   drivers/staging/media/imx/imx-media-capture.c |   7 +-
>>   drivers/staging/media/meson/vdec/vdec.c       |  13 +-
>>   .../staging/media/sunxi/cedrus/cedrus_h264.c  |   9 +-
>>   .../staging/media/sunxi/cedrus/cedrus_h265.c  |   9 +-
>>   include/media/v4l2-ioctl.h                    |   4 +
>>   include/media/v4l2-mem2mem.h                  |  12 +
>>   include/media/videobuf2-core.h                |  65 +-
>>   include/media/videobuf2-v4l2.h                |  13 +
>>   include/uapi/linux/videodev2.h                |  24 +-
>>   samples/v4l/v4l2-pci-skeleton.c               |   5 +-
>>   70 files changed, 990 insertions(+), 472 deletions(-)
>>   create mode 100644 Documentation/userspace-api/media/v4l/vidioc-delete-bufs.rst
>>
>