mbox series

[v2,0/7] Fixes and improvements for RS485

Message ID 20231011173829.10508-1-l.sanfilippo@kunbus.com
Headers
Series Fixes and improvements for RS485 |

Message

Lino Sanfilippo Oct. 11, 2023, 5:38 p.m. UTC 
  The following series includes some fixes and improvements around RS485 in
the serial core and UART drivers:

Patch 1: Do not hold the port lock when setting rx-during-tx GPIO
Patch 2: Get rid of useless wrapper pl011_get_rs485_mode()
Patch 3: set missing supported flag for RX during TX GPIO
Patch 4: fix sanitizing check for RTS settings
Patch 5: make sure RS485 is cannot be enabled when it is not supported
Patch 6: imx: do not set RS485 enabled if it is not supported
Patch 7: omap: do not override settings for rs485 support

Changes in v2:
- add missing 'Fixes' tags as requested by Greg
- corrected a typo as pointed out by Hugo
- fix issue in imx driver in the serial core as suggested by Uwe
- partly rephrase some commit messages
- add patch 7

Lino Sanfilippo (7):
  serial: Do not hold the port lock when setting rx-during-tx GPIO
  serial: amba-pl011: get rid of useless wrapper pl011_get_rs485_mode()
  serial: core: set missing supported flag for RX during TX GPIO
  serial: core: fix sanitizing check for RTS settings
  serial: core: make sure RS485 cannot be enabled when it is not
    supported
  serial: core, imx: do not set RS485 enabled if it is not supported
  serial: omap: do not override settings for RS485 support

 drivers/tty/serial/amba-pl011.c  | 14 +---------
 drivers/tty/serial/imx.c         |  8 ------
 drivers/tty/serial/omap-serial.c |  8 +++---
 drivers/tty/serial/serial_core.c | 48 ++++++++++++++++++++++----------
 drivers/tty/serial/stm32-usart.c |  5 +---
 5 files changed, 39 insertions(+), 44 deletions(-)


base-commit: 94f6f0550c625fab1f373bb86a6669b45e9748b3